# Agricultural Technology Grade 12 NSC June 2021 QP (Eng)

> Grade 12 Agricultural Technology question paper from the NSC June Exam 2021 (English), 14 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/agricultural-technology-may-june-2021-eng/3f54a9c3-3e0a-4cf0-a219-4664361b8bd4
- Updated: 2026-09-27
- Subject: Agricultural Technology
- Grade: Grade 12
- Document type: Question paper
- Year: 2021
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 14

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC June 2021 QP (Eng)](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-eng/3f54a9c3-3e0a-4cf0-a219-4664361b8bd4)

## About this document

Agricultural Technology · Grade 12 · NSC June Exam · 2021. Question paper, 14 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

             SENIOR CERTIFICATE EXAMINATIONS/
         NATIONAL SENIOR CERTIFICATE EXAMINATIONS

                          AGRICULTURAL TECHNOLOGY

                                         2021

                                                                     MARKS: 200

                                                                   TIME: 3 hours

                       This question paper consists of 14 pages.

Copyright reserved                                                 Please turn over

### Page 2

Downloaded from hlayiso.com
Agricultural Technology                             2                                  DBE/2021
                                                 SC/NSC

INSTRUCTIONS AND INFORMATION

1.        GENERAL INSTRUCTIONS AND INFORMATION

          1.1             This question paper consists of TWO sections, namely SECTION A
                          and SECTION B.

          1.2             BOTH sections are COMPULSORY.

          1.3             Answer ALL the questions in the ANSWER BOOK.

          1.4             Number the answers correctly according to the numbering system
                          used in this question paper.

          1.5             You may use a non-programmable calculator.

          1.6             Write neatly and legibly.

2.        SECTION A: SHORT QUESTIONS

          2.1             This section consists of THREE questions.

          2.2             Follow the instructions when answering the questions.

3.        SECTION B: STRUCTURED LONG QUESTIONS

          3.1             This section consists of FIVE questions.

          3.2             Start EACH question on a NEW page.

Copyright reserved                                                                Please turn over

### Page 3

Downloaded from hlayiso.com
Agricultural Technology                              3                                  DBE/2021
                                                  SC/NSC

SECTION A

QUESTION 1

1.1       Various options are provided as possible answers to the following questions.
          Choose the answer and write only the letter (A–D) next to the question
          numbers (1.1.1 to 1.1.10) in the ANSWER BOOK, e.g. 1.1.11 D.

          1.1.1           … cameras are installed on drones to do surveillance work at night.

                          A   Seismic
                          B   Radar
                          C   Infrared
                          D   Doppler                                                                (2)

          1.1.2           A … is used to load large round bales safely onto a truck.

                          A   pulley
                          B   trestle hoist
                          C   loading ramp
                          D   front-end fork loader                                                  (2)

          1.1.3           A device installed in a solar charger system that prevents the
                          battery from overcharging:

                          A   Multimeter
                          B   Transformer
                          C   Regulator
                          D   Inverter                                                               (2)

          1.1.4           … is NOT associated with the running expenses of a tractor.

                          A   Depreciation
                          B   Fuel
                          C   Labour
                          D   Supervising                                                            (2)

          1.1.5           … is a term associated with agriculture, where all farm equipment
                          and spares must comply with certain common requirements.

                          A   Precision farming
                          B   Standardisation
                          C   Mechanisation
                          D   Production                                                             (2)

Copyright reserved                                                                Please turn over

### Page 4

Downloaded from hlayiso.com
Agricultural Technology                             4                                   DBE/2021
                                                 SC/NSC

          1.1.6           A material that can be used effectively as a seal around the door of
                          a cold storage room:

                          A   Vesconite
                          B   Fibre glass
                          C   Teflon
                          D   Rubber                                                                  (2)

          1.1.7           The … determines the volume of the gas flow when welding with
                          an oxyacetylene set.

                          A   cutting lever
                          B   size of the nozzle
                          C   size of the cylinders
                          D   flashback arrester                                                      (2)

          1.1.8           The teeth of this type of gear run at an angle across the outer
                          circumference of the gear:

                          A   Ratchet gear
                          B   Spur gear
                          C   Ring gear
                          D   Helical gear                                                            (2)

          1.1.9           The … can be used effectively in a chain drive system.

                          A   V-belt
                          B   sprocket
                          C   fishbone gear
                          D   worm gear                                                               (2)

          1.1.10          … is NOT a function of GPS navigation systems in modern
                          combine harvesters.

                          A   Yield monitoring
                          B   Autonomous steering
                          C   Identifying a mechanical problem
                          D   Determining of position                                                 (2)

Copyright reserved                                                                 Please turn over

### Page 5

Downloaded from hlayiso.com
Agricultural Technology                            5                                    DBE/2021
                                                SC/NSC

1.2       Change the UNDERLINED word(s) in each of the following statements
          to make them TRUE. Write only the word next to the question numbers
          (1.2.1 to 1.2.5) in the ANSWER BOOK, e.g. 1.2.6 Tractor.

          1.2.1           Hearing loss is associated with long work shifts, excessive
                          workload and harassment.                                                    (2)

          1.2.2           Shift the clutch to neutral after stopping a tractor when hitching an
                          implement.                                                                  (2)

          1.2.3           Chromium as an alloy element in stainless steel decreases
                          weldability.                                                                (2)

          1.2.4           The catalyst and accelerator used in glass fibre repairs should
                          always be stored separately to avoid poisoning.                             (2)

          1.2.5           The hammers of a hammer mill must be replaced regularly to
                          prevent vibration.                                                          (2)

1.3       Choose a word/term from COLUMN B that matches the description
          in COLUMN A. Write only the letter (A–H) next to the question numbers
          (1.3.1 to 1.3.5) in the ANSWER BOOK, e.g. 1.3.6 J.

                     COLUMN A                                      COLUMN B
          1.3.1 A major factor to consider               A   compressed air
                when welding in the overhead
                oxyacetylene position                    B   thermal images

          1.3.2 Removes the melted metal                 C   latex
                when doing plasma cutting
                                                         D   tensiometer
          1.3.3 Synthetic material used for the
                manufacturing of hygienic                E   GPS
                gloves
                                                         F   gravity
          1.3.4 Equipment that is used to
                determine the moisture                   G   centre pivot
                content of soil
                                                         H   research
          1.3.5 Technology that is used to
                determine areas of stunted
                growth in a maize field
                                                                                          (5 x 2)     (10)

                                                                         TOTAL SECTION A:             40

Copyright reserved                                                                 Please turn over

### Page 6

Downloaded from hlayiso.com
Agricultural Technology                             6                                     DBE/2021
                                                 SC/NSC

SECTION B

QUESTION 2: MATERIALS AND STRUCTURES

Start this question on a NEW page.

2.1       Stainless steel, mild steel, copper and aluminium are all metals that are used
          on a farm in different applications.

          2.1.1           Which ONE of the metals above can be used to manufacture water
                          pipes for farmhouses?                                                        (1)

          2.1.2           Give a reason why the metal named in QUESTION 2.1.1 will be the
                          most suitable for this application.                                          (1)

          2.1.3           Which joining method must be used to join two copper pipes
                          permanently?                                                                 (1)

          2.1.4           Name the metal that will be best for transporting milk in a dairy.           (1)

          2.1.5           Give a reason why the metal named in QUESTION 2.1.4 would be
                          most suitable for this specific application.                                 (1)

          2.1.6           Which joining method will be suitable for permanently joining
                          stainless steel?                                                             (1)

          2.1.7           Name a metal that will be the most economical for the
                          manufacturing of a farm gate.                                                (1)

          2.1.8           Name a substance that can easily corrode copper.                             (1)

          2.1.9           Name the metal that is commonly used in the food industry for
                          storing purposes.                                                            (1)

2.2       PVC pipes that are joined with PVC weld can sometimes leak. Recommend
          THREE preparation procedures that must be followed before the adhesive is
          applied to ensure an effective joint.                                                        (3)

Copyright reserved                                                                  Please turn over

### Page 7

Downloaded from hlayiso.com
Agricultural Technology                            7                                   DBE/2021
                                                SC/NSC

2.3       The picture below shows an electric fence.

          2.3.1           Describe the earth leakage system of the electrical fence.                 (6)

          2.3.2           Name the type of wire that should NOT be used in the construction
                          of an electric fence.                                                      (1)

          2.3.3           State TWO daily activities that the farmer must perform to maintain
                          an electric fence properly.                                                (2)

2.4       Explain why you would recommend Vesconite as the best material to use in
          the manufacturing of bushes.                                                               (5)

2.5       Name ONE electrical property of Teflon and give a reason for your answer.                  (2)

2.6       Name FIVE properties applicable to the safety screens used on a combine
          harvester.                                                                                 (5)

2.7       Give TWO reasons for using brass instead of copper in the manufacturing of
          electrical connections.                                                                    (2)
                                                                                                     [35]

Copyright reserved                                                                Please turn over

### Page 8

Downloaded from hlayiso.com
Agricultural Technology                            8                                    DBE/2021
                                                SC/NSC

QUESTION 3: ENERGY

Start this question on a NEW page.

3.1       Name TWO alternative energy sources that use a turbine and a generator
          to generate electricity.                                                                    (2)

3.2       The picture below shows a 3 000-watt photovoltaic solar panel system.

          3.2.1           How many of these systems do you need to provide sufficient
                          power to a 6 kW submersible pump?                                           (1)

          3.2.2           Determine whether the panels should be connected in parallel or
                          series. Give a reason for your answer.                                      (2)

          3.2.3           Give a reason for the use of silicon in the manufacturing of the
                          solar cells.                                                                (1)

          3.2.4           Name the layer of the solar panel that carries negative electrons.          (1)

          3.2.5           What can be done to ensure that electricity is also available during
                          the night if you use a solar power electric system?                         (1)

          3.2.6           Name THREE applications of electric solar panels on a game farm.            (3)

3.3       State FOUR advantages of a geothermal power station.                                        (4)

3.4       Name FOUR factors that must be considered when choosing a suitable
          location for installing a wind turbine on a farm.                                           (4)

3.5       Name the process that is used to manufacture ethanol.                                       (1)
                                                                                                      [20]

Copyright reserved                                                                 Please turn over

### Page 9

Downloaded from hlayiso.com
Agricultural Technology                  9                               DBE/2021
                                      SC/NSC

QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

Start this question on a NEW page.

4.1       The table below shows four welding defects. Redraw the table in your
          ANSWER BOOK and write down the answers to QUESTIONS 4.1.1 to 4.1.8.

                  ILLUSTRATION       NAME OF THE      GIVE THE POSSIBLE
                                        WELDING            CAUSES
                                         DEFECT
                                     4.1.1          4.1.2

                                     4.1.3          4.1.4

                                     4.1.5          4.1.6

                                     4.1.7          4.1.8

                                                                                       (8)

Copyright reserved                                                  Please turn over

### Page 10

Downloaded from hlayiso.com
Agricultural Technology                          10                                 DBE/2021
                                               SC/NSC

4.2       The illustration below shows the MIG welding process. Label A–D.

                                    B
                                A                C
                                                     D

                                                                                                  (4)

4.3       The image below shows an oxyacetylene cutting apparatus.

          4.3.1           Name TWO types of materials that can be cut with the above
                          apparatus.                                                              (2)

          4.3.2           Explain FIVE steps to follow when making a straight cut on a
                          10 mm thick mild steel sheet using the oxyacetylene cutting
                          apparatus.                                                              (5)

          4.3.3           Give THREE tips to ensure a high quality welding joint when oxy-
                          acetylene welding is done in the overhead welding position.             (3)

4.4       Scenario
          You are requested to design a work bench. The dimensions of the work
          bench must be 1 200 mm x 600 mm x 900 mm (height).
           Material needed:
             o     Angle iron of 50 mm x 50 mm x 5 mm
             o     Mild steel sheet of 2 500 mm x 1 200 mm x 5 mm
           Use scale 1 : 100

          Use the information above and draw a neat design sketch of the work bench.

          Marks will be allocated as follows:
            Design                       2
            Scale (Application)          1
            Dimensions                   2
            Neatness                     1                                                        (6)

Copyright reserved                                                             Please turn over

### Page 11

Downloaded from hlayiso.com
Agricultural Technology                   11                                 DBE/2021
                                        SC/NSC

4.5       Name a gas that could be used during plasma cutting to remove the melted
          metal.                                                                           (1)

4.6       Use a table and compare the inverter welding machine with the MIG welding
          machine.                                                                         (6)
                                                                                           [35]

Copyright reserved                                                      Please turn over

### Page 12

Downloaded from hlayiso.com
Agricultural Technology                          12                                    DBE/2021
                                               SC/NSC

QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT

Start this question on a NEW page.

5.1       The sketch below shows three components working together in a system.

          5.1.1           Identify the component in the sketch that serves as a connection
                          between the parts.                                                        (1)

          5.1.2           Name the substance that is used to lubricate the component
                          identified in QUESTION 5.1.1.                                             (1)

          5.1.3           State ONE application         of   the   component   identified   in
                          QUESTION 5.1.1.                                                           (1)

          5.1.4           Name TWO mechanisms installed in the drive system of a
                          four-wheel drive vehicle that allows disconnection of drive to the
                          front wheels and state ONE advantage of EACH mechanism.                   (4)

5.2       Indicate the type of hydraulic cylinder that can be used to activate the fork of a
          bale-handling mechanism when forced movement in reverse directions is
          required.                                                                                 (1)

5.3       Give the function of the lining on the clutch plate as found in the clutch
          assembly of a vehicle.                                                                    (1)

5.4       Name TWO advantages of the differential lock as found on a tractor.                       (2)

5.5       Some universal joint bearings are manufactured without a grease nipple.
          Name ONE advantage of such a bearing.                                                     (1)

Copyright reserved                                                               Please turn over

### Page 13

Downloaded from hlayiso.com
Agricultural Technology                           13                                    DBE/2021
                                                SC/NSC

5.6       An electrical motor is connected to a centrifugal pump by means of pulleys
          and a V-belt. The pump pulley has a diameter of 450 mm and the electrical
          motor has a pulley of 150 mm.

          5.6.1           Calculate the pulley ratio of the electrical motor to the pump. (Show
                          ALL calculations.)                                                          (3)

          5.6.2           Give FOUR reasons why a farmer would prefer V-belt drive
                          systems to flat belt drive systems.                                         (4)

          5.6.3           Identify the part installed in the housing of the electrical motor to
                          allow the rotor shaft to rotate freely.                                     (1)

5.7       Blue smoke seen at the exhaust pipe of a tractor indicates oil in the
          combustion chamber. Give FOUR possible causes of the presence of oil in
          the combustion chamber of an engine.                                                        (4)

5.8       Describe the properties of a functional clutch.                                             (5)

5.9       Name FOUR parts that must be examined on a second-hand tractor before
          you decide to buy it.                                                                       (4)

5.10      State the functions of the following parts of a hammer mill:

          5.10.1          Hopper                                                                      (1)

          5.10.2          Cyclone                                                                     (1)

5.11      Give a reason for setting the wheels of a front-end loader to its widest
          possible position.                                                                          (1)

5.12      Describe the servicing procedures that must be followed when preparing a
          combine harvester for the harvesting season.                                                (4)
                                                                                                      [40]

Copyright reserved                                                                 Please turn over

### Page 14

Downloaded from hlayiso.com
Agricultural Technology                           14                                  DBE/2021
                                                SC/NSC

QUESTION 6: WATER MANAGEMENT
Start this question on a NEW page.
6.1       Name FOUR important factors that must be considered before deciding on
          a relevant irrigation method.                                                          (4)

6.2       What are the main goals with irrigation scheduling?                                    (3)
6.3       Identify TWO structural problems on the sprinkler shown below that can
          negatively influence efficiency.

                                                                                                 (2)
6.4       Name a device that a farmer can use to measure the evaporation tempo in
          a maize field.                                                                         (1)
6.5       Draw a labelled freehand sketch of a French water drainage system. Marks
          will be allocated as follows:

           Design          1
           Drawing         1
           Labels          4                                                                     (6)

6.6       List FIVE items that should never be disposed of in a household septic tank
          system.                                                                                (5)
6.7       Give THREE reasons why it is essential for a farmer to know how to
          determine the flow rate in a water pipe delivery system.                               (3)
6.8       The picture below shows a centre-pivot irrigation system.

          6.8.1           Name THREE advantages of centre-pivot irrigation systems.              (3)
          6.8.2           Which THREE elements are built into the design of a centre-pivot
                          irrigation system to ensure uniform distribution of water along the
                          whole length of the system?                                            (3)
                                                                                                 [30]
                                                                       TOTAL SECTION B:          160
                                                                          GRAND TOTAL:           200
Copyright reserved

## Related documents

- [Agricultural Technology May June 2021 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-afr/7ffbeef7-3f87-4cff-a5d4-5a92f3861dd1) — Agricultural Technology · QP · 2021 · Afr
- [Agricultural Technology May June 2021 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-mg-afr/427a8975-2250-4eaa-98ec-79fd8d83222d) — Agricultural Technology · Memo · 2021 · Afr
- [Agricultural Technology May June 2021 MG Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-mg-eng/bb8abf1f-a9c0-4d72-915e-31e75ca3201d) — Agricultural Technology · Memo · 2021 · Eng
- [Agricultural Technology Nov 2020 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2020-afr/a61a52db-ba87-4f60-93f1-8aa7f810b224) — Agricultural Technology · QP · 2021 · Afr
- [Agricultural Technology May-June 2024 Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-question-paper-english/85728b95-5774-4d6d-85dd-de20dc4ca39b) — Agricultural Technology · QP · 2024 · Eng
- [Agricultural Technology May-June 2023 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-eng/6e72892b-deb8-4820-8758-b91c5592448a) — Agricultural Technology · QP · 2023 · Eng

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology May-June 2025 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2025-mg-afr/5f3f1dd7-8ba2-41ba-97bd-f8a4f9dfbdd5) — Memo · 2025 · Afr
- [Agricultural Technology Nov 2025 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/69e68c35-b84c-4320-b0d8-58fcb6116f22) — Memo · 2025 · Eng
- [Agricultural Technology Nov 2025 MG Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/84499f01-76f1-43ac-8b53-d844857b9e13) — Memo · 2025 · Afr
- [Agricultural Technology Nov 2024 MG Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-eng/5735a5ce-d167-4c13-bf13-9b5b710aed67) — Memo · 2024 · Eng
- [Agricultural Technology Nov 2024 MG Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-afr/fce88f27-4539-47d4-b4b5-d7ddad4cd2a6) — Memo · 2024 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
