# Agricultural Technology Grade 12 NSC June 2022 Memo (Eng)

> Grade 12 Agricultural Technology memorandum from the NSC June Exam 2022 (English), 15 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/agricultural-technology-may-june-2022-mg-eng/80cec2f1-af20-4a7a-bd4b-a41f7966a36e
- Updated: 2026-10-29
- Subject: Agricultural Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2022
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 15

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC June 2022 Memo (Eng)](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-mg-eng/80cec2f1-af20-4a7a-bd4b-a41f7966a36e)

## About this document

Agricultural Technology · Grade 12 · NSC June Exam · 2022. Memorandum. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

             SENIOR CERTIFICATE EXAMINATIONS/
         NATIONAL SENIOR CERTIFICATE EXAMINATIONS

                           AGRICULTURAL TECHNOLOGY

                                          2022

                                MARKING GUIDELINES

                                                                      MARKS: 200

                      These marking guidelines consist of 15 pages.

Copyright reserved                                                    Please turn over

### Page 2

Downloaded from hlayiso.com
Agricultural Technology                      2                                    DBE/2022
                                 SC/NSC – Marking Guidelines

SECTION A

QUESTION 1

1.1    1.1.1    A

       1.1.2    C

       1.1.3    D

       1.1.4    B

       1.1.5    A

       1.1.6    C

       1.1.7    B

       1.1.8    D

       1.1.9    C

       1.1.10 A

                                                                                     (20)

1.2    1.2.1    Red 

       1.2.2    Hard facing 

       1.2.3    Noise pollution 

       1.2.4    GPS 

       1.2.5    Rectangular bales 

                                                                                     (10)

1.3    1.3.1    E

       1.3.2    G

       1.3.3    C

       1.3.4    F

       1.3.5    D

                                                                                     (10)

                                                               TOTAL SECTION A:       40
Copyright reserved                                                            Please turn over

### Page 3

Downloaded from hlayiso.com
Agricultural Technology                        3                                 DBE/2022
                                   SC/NSC – Marking Guidelines

SECTION B

QUESTION 2: MATERIALS AND STRUCTURES

 2.1      THREE possible factors that when choosing a suitable adhesive for this specific
          application.

             Inflammability.
             Duration of cohesion.
             Duration of usability.
             Heat resistance. (temperature)
             Water resistance/ Oil resistance.
             Elasticity.
             Load capacity.                                                     (Any 3)      (3)
 2.2      Advantages of using a water trough made from glass fibre over a trough made
          of steel.
             Lightness.
             Can be formed into any shape.
             Can easily be sawn, drilled, and filed.
             Toughness.
             Easy repaired when broken.
             Does not rust, corrode or erode.                                   (Any 3)      (3)
 2.3      FOUR chemical substances that does not have any effect on Teflon.
             Adhesives./ Glue.
             Asphalt/tar.
             Dyes./ Poisons
             Greases.
             Gasses. 
             Latex.
             Lacquers/ Fuels.
             Paint.                                                                          (4)
             Acids.                                                           (Any 4)

 2.4      2.4.1 ONE reason for using Vesconite in dry applications and explanation for
                each answer.

                  Reason: Vesconite do not need any lubricant. 

                  Explanation: Made of internal lubricated polymers.                          (2)

          2.4.2 TWO circumstances where Vesconite can be effectively used on a
                tractor to replace existing metal bushes.

                     Front-axle swivel bushes.
                     Steering linkage bushes.
                     Gear lever bushes. 
                     Three point lift bushes.                                                (2)

Copyright reserved                                                          Please turn over

### Page 4

Downloaded from hlayiso.com
Agricultural Technology                        4                                   DBE/2022
                                   SC/NSC – Marking Guidelines

 2.5      2.5.1 THREE factors that must be taken into consideration when identifying tin
                for the manufacturing of food cans.

                     Soft.
                     Malleable metal.
                     Can be highly polished.
                     Resists oxygen and water but dissolves in acids and bases (prevent
                      rust).                                                     (Any 3)        (3)

          2.5.2 TWO commercial uses of tin other than the application in the food
                canning industry.

                     Metal coating.
                     Alloy element of bronze.
                     Alloy element of soft soldering.
                     Cool drink cans.                                            (Any 2)       (2)

 2.6      TWO properties of bronze bushes that makes it better suited for the use on
          implements.

             Bronze resists corrosion.
             Resists metal fatigue more than steel.
             Better conductor of heat.
             Low friction properties.                                            (Any 2)       (2)

 2.7      THREE influences of manganese on stainless steel.

             It combats corrosion.
             Gives steel a coarser structure.
             Changes the band structure, causing a reduction in striking strength.
             Increases tensile strength.
             Reduces the critical cooling tempo.
             Improves hardening.
             Increases resistance against wear.
             Reduces magnetism.                                                  (Any 3)       (3)

 2.8      Justification of the use of brass over copper in the manufacturing of water
          couplings.

             Strength.
             Machinability.
             Wear resistance.
             Hardness.                                                            (Any 2)      (2)

Copyright reserved                                                            Please turn over

### Page 5

Downloaded from hlayiso.com
Agricultural Technology                           5                                    DBE/2022
                                      SC/NSC – Marking Guidelines

 2.9      2.9.1      Identify component A and B in the diagram.

                     A - Energiser.
                     B - Earth spike.                                                               (2)

          2.9.2      The maximum voltage allowed by legislation that can be applied in the
                     system.

                     10 000 volt.                                                                   (1)

          2.9.3      Description of the daily tasks that must be carried out to maintain an
                     electric fence.

                         Clear any vegetation from the fence line.
                         Check for damaged or broken wires.
                         Damaged isolators or loose connections.
                         Regular testing of the energiser's pulse.                    (Any 2)      (2)

          2.9.4      FOUR soil conditions that can have a negative effect on the earth
                     efficiency of an electrical fence.

                         Peat.
                         Sandy soil.
                         Gravel.
                         Very dry soil.
                         Snow or frozen ground.                                       (Any 4)       (4)
                                                                                                     [35]

Copyright reserved                                                                Please turn over

### Page 6

Downloaded from hlayiso.com
Agricultural Technology                           6                                       DBE/2022
                                      SC/NSC – Marking Guidelines

QUESTION 3: ENERGY

3.1 3.1.1      THREE important factors that must be considered when installing a wind
               turbine.

                    Select suitable environment.
                    Size of the turbine.
                    Availability of substantial wind strength.
                    Absence of mountains and hills.
                    Turbine capacity.
                    Hire a professional to do a survey on the surrounding area.         (Any 3)      (3)

      3.1.2    Explanation of TWO benefits of wind turbines.

                    Decades of free electricity after initial-cost recovery.
                    Increased property values.
                    Reliable electricity generation.
                    Relief from high prices of other forms of electricity.
                    Personal energy independence.
                    Supports clean energy.
                    Fight global warming.
                    Renewable energy. 
                    No fuel costs.                                           (Any 2 )                (2)

3.2 3.2.1      The semi-conductive material used for the manufacturing of the
               photovoltaic solar panel.

               Silicon.                                                                               (1)

      3.2.2    Explanation of the process of generating electrical energy in a solar panel.

                    The solar panels are made of a semi-conductive material that contains
                     electrons.
                    When photons (contained within the sun's rays) hit the solar cells, the
                     electrons absorb this solar energy.
                    Transforming them into conduction electrons.
                    Electrons are able to become free, and carry an electric charge through
                     a circuit to a destination.                                                      (4)

3.3 The advantages of a geothermal power station above a coal power station.

         A geothermal system does not create any pollution.
         The cost of the land to build a geothermal power plant on is usually less
          expensive.
         Geothermal plants take up very little room.
         You may receive tax cuts, and/or no environmental bills.
         No fuel is used to generate the power.
         No costs for purchasing, transporting, or cleaning up of fuels.         (Any 4)             (4)

Copyright reserved                                                                  Please turn over

### Page 7

Downloaded from hlayiso.com
Agricultural Technology                      7                                    DBE/2022
                                 SC/NSC – Marking Guidelines

3.4 FOUR benefits of biofuels.

         Biofuel offers a cheaper solution to our energy needs.
         Bio-fuels are made from plant and animal waste.
         Biodegradable.
         Do not harm the environment.
         Does not require any radical changes to switch to the use of biofuels.
         Renewable sources of energy.
         Inexpensive to produce.
         Help prevent engine knocking.                                          (Any 4)       (4)

3.5 TWO resources for the manufacturing of methanol.

         Woody plant fibre.
         Coal.
         Natural gas.
         Fermented waste products such as sewage and manure.                     (Any 2)       (2)
                                                                                                [20]

Copyright reserved                                                           Please turn over

### Page 8

Downloaded from hlayiso.com
Agricultural Technology                         8                                   DBE/2022
                                    SC/NSC – Marking Guidelines

QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

4.1   4.1.1     Identification of part A.

                Cutting Nozzle.                                                        (1)

      4.1.2     Identifying the problem indicated by arrow B that can occur when
                thick materials are being cut with the plasma-cutting machine.

                The angle of cut will not be square/90º.                               (1)

      4.1.3     Addressing the problem identified in QUESTION 4.1.2.

                    A machine can be used to grind the face square.
                    The welding nozzle can be tilted at an angle to compensate
                     for the problem.                                    (Any 1)       (1)

      4.1.4     TWO types of gasses that are commonly used in the plasma-
                cutting process.

                    Regular air
                    Argon
                    Nitrogen
                    Oxygen                                              (Any 2)       (2)

4.2   4.2.1     TWO gasses used during the oxy-acetylene cutting process.

                Acetylene and oxygen.                                                 (2)

      4.2.2     Advantages of the oxy-acetylene apparatus over the plasma
                cutter.

                    No need for electricity.
                    Can be used to heat up work pieces. 
                    Portable.
                    No electrical components.
                    Rust has no influence on the cutting process.
                    Easy to operate.                                   (Any 3)        (3)

Copyright reserved                                                           Please turn over

### Page 9

Downloaded from hlayiso.com
Agricultural Technology                         9                                        DBE/2022
                                    SC/NSC – Marking Guidelines

      4.2.3     Important safety measures to note when working with the
                oxy-acetylene cutting apparatus.

                    If a cylinder falls over and breaks the main valve off, the
                     cylinder will become a missile and cause extreme damage.
                    Wear a leather apron or similar protective clothing and
                     welding gloves when using an oxy-acetylene cutting torch.
                    Always use proper oxy-acetylene cutting goggles.
                    Never point the flame towards another person or any
                     flammable material.
                    Always light the oxyacetylene cutting torch with a striker.
                    Wherever possible, use a heat shield behind the component
                     you are heating.
                    After heating a piece of metal, label it as 'HOT' with a piece of
                     chalk so that others will not attempt to pick it up.
                    Make sure there are no leaks on pipes and connections. 
                    Make sure all valves are closed after use.                             (3)
                                                                            (Any 3)

4.3   4.3.1     Describing the process to replace a worn welding tip.

                    Remove the welding shield cup.
                    Unscrew the damaged welding tip.
                    Screw the new tip on.
                    Replace the welding cup.                                               (4)

      4.3.2     Explanation of the use of anti-spatter spray during the MIG
                welding process.

                    Prevent the sprout from clogging with welding metal.
                    Prevent the filler wire/welding electrode from sticking to the
                     contact tip.                                                           (2)

      4.3.3     FOUR reasons for the welding wire not running smoothly
                through the welding hose.

                    Bended welding feeder hose.
                    Damage to the feeding mechanism.
                    Corroded welding electrode/wire.
                    Damaged tip.                                                           (4)

4.4   Preventative measures:

      4.4.1     Spot weld.
      4.4.2     Pre-setting.
      4.4.3     Clamping.                                                                   (3)

Copyright reserved                                                                Please turn over

### Page 10

Downloaded from hlayiso.com
Agricultural Technology                        10                               DBE/2022
                                    SC/NSC – Marking Guidelines

4.5   Design drawing of a door for a horse stable.

      Marks will be allocated for the following:

                 Design                                     (1)
                 Hinges and latch                           (2)
                 Dimensions                                 (2)
                 Neatness                                   (1)

                                                                                     (6)

4.6   Explanation of using an inverter welder powered by a generator rather
      than using a MIG welder.
          Lightweight.
          Compact.
          No need for gas cylinder.
          Inverter can work in windy conditions.                    (Any 3)        (3)
                                                                                    [35]

Copyright reserved                                                        Please turn over

### Page 11

Downloaded from hlayiso.com
Agricultural Technology                       11                                   DBE/2022
                                   SC/NSC – Marking Guidelines

QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT

5.1 5.1.1      FIVE basic implements that can be used in the harvesting of the
               crop.

                    Tractor.
                    Cutting machine.
                    Hay rake.
                    Baling machine.
                    Wrapping machine.
                    Front-end loader.                                  (Any 5)        (5)

      5.1.2    THREE advantages of using machinery in the harvesting process.

                    Single operation.
                    Less time consuming.
                    Labour saving.
                    Very reliable method.
                    Economical.                                                       (3)

      5.1.3    Another method that can be used to cut lucerne.

               Using a sickle.                                                         (1)

      5.1.4    ONE safety device that is installed on a baling machine

                    Shear bolt.
                    Slip clutch.
                    Tension springs.                                   (Any 1)        (1)

5.2 5.2.1      Calculation of the running cost of a combine harvester.

               (Show ALL calculations.)

               R8 100-00 + R1 200-00 + R1 500-00 + R3 000-00
               + R8 000-00 = R21 800-00                                               (2)

      5.2.2    Calculating the VAT (15%) of the total running cost.

               R21 800-00 x 15% = R3 270-00                                           (2)

Copyright reserved                                                           Please turn over

### Page 12

Downloaded from hlayiso.com
Agricultural Technology                        12                                   DBE/2022
                                    SC/NSC – Marking Guidelines

5.3 5.3.1      Label for the graph.

               Depreciation.                                                           (1)

      5.3.2    Determine the right time to sell the tractor by analysing the data
               from the graph and TWO reasons for the answer.

                    During year 4.
                     Motivation
                    One year left on maintenance plan.
                    Higher value than selling during year 6.                          (3)

      5.3.3    THREE actions a farmer can take to minimize excessive
               depreciation in the value of second-hand implements.

                    Repair/Replace broken or worn parts.
                    Store properly.
                    Service according to user manual.
                    Use implement according to specifications.         (Any 3)        (3)

5.4 5.4.1      Identification of the components labelled A, B and C and TWO
               functions of each.

               A. Top link.
                    To adjust the angle of the implement in relation to the
                      tractors movement.
                    Serves as top connection of the three-point mechanism to
                      the implement.
               B. Hydraulic pump.
                    Provides pressure to the hydraulic system of the tractor.
                    Provides pressure to the hydraulic system of the
                      implement.
               C. PTO drive shaft.
                    Transmits driving power from tractor to the implement.
                    Provide angular movement between the tractor and
                      implement.                                                       (9)

      5.4.2    THREE important safety precautions applicable to component C.

                    Never climb over the driving shaft when in motion. 
                    Safety screen must be in place.
                    Safety screen must not rotate with the shaft.
                    Screen must by highly visible.
                    Never work on an implement when driving shaft is in motion.
                                                                          (Any 3)       (3)

Copyright reserved                                                           Please turn over

### Page 13

Downloaded from hlayiso.com
Agricultural Technology                           13                                       DBE/2022
                                       SC/NSC – Marking Guidelines

5.5 5.5.1      Identification of the components labelled A, B and C.

                   A    Flywheel.
                   B    Clutch plate.
                   C    Pressure plate.                                                       (3)

      5.5.2    FOUR reasons for equipping a tractor with a clutch.

                      Engine drive needs to be disengaged when gears are
                       changed.
                      Drive should be disengaged when the tractor is started.
                      The clutch is disengaged to allow engine speed to increase
                       and then engaged to give greater torque.
                      Allows the operator to stop the tractor, belt pulley or PTO shaft
                       without stopping the engine.                                           (4)
                                                                                              [40]

Copyright reserved                                                                  Please turn over

### Page 14

Downloaded from hlayiso.com
Agricultural Technology                        14                                    DBE/2022
                                    SC/NSC – Marking Guidelines

QUESTION 6: WATER MANAGEMENT

6.1    6.1.1    Explanation of the structure's ability to carry the heavy load of the
                irrigation system.

                    Sustained by triangulation/truss method.
                    Arched design.
                    Steel cables/rods hold the trusses.                           (Any 2)        (2)

       6.1.2    ONE possible cause of sprinkler nozzle blockage and provide a solution
                to the problem.

                    Sand/fertilizer particles.
                    Plant matter.
                    Organisms in water. (Algae, tadpoles etc.)
                    This can be prevented by installing a filter in the system.   (Any 2)        (2)

       6.1.3    THREE factors to consider when selecting a water pump for the centre
                pivot system.

                    Water source.
                    Type of pump.
                    Size.
                    Pressure requirements.
                    Available pump models.
                    Power source needed to run the pump.                          (Any 3)        (3)

6.2    The process when an irrigation farmer sets the correct frequency and duration of
       water application to a crop to maximise plant growth.

       Irrigation scheduling/timing.                                                              (1)

6.3    6.3.1    Identify component A and its function.

                    Manhole/Drain cover.
                    It is to provide access for cleaning and inspection.                         (2)

       6.3.2    Requirements that must be followed to keep septic system functional.

                    Use only toilet paper.
                    Do not flush down non-degradable materials into the tank.
                     (Cigarettes, plastics, rubber)
                    No disinfectants, bleaches, oils should be flushed down the
                     system.
                    Inspect manhole regularly.
                    Empty the tank when required.                              (Any 4)           (4)

Copyright reserved                                                              Please turn over

### Page 15

Downloaded from hlayiso.com
Agricultural Technology                         15                                       DBE/2022
                                     SC/NSC – Marking Guidelines

6.4    6.4.1     Explanation of the technical lay out of the drainage system.
                    It contains perforated pipes.
                    The pipes are buried under gravel or pebbles.
                    The water drains through the surface gravel and seeps into the
                     pipe's perforations before flowing out at the end of the pipe.
                    Pipes are installed at a slight angle or slope to facilitate the flow of
                     water away from the waterlogged area.                             (Any 3)     (3)
       6.4.2     A system that can quickly move large amounts of water from water
                 logged fields.
                    Channel drain.
                    Slope drain.
                    Herringbone.                                                     (Any 1)      (1)

       6.4.3     A few aspects that can cause problems if there is no drainage system
                 installed around the perimeter of a building.
                    Water leaks into the house.
                    Moisture rises into the walls.
                    Standing water attracts pests.
                    Erosion around the foundation.                                   (Any 3)      (3)
6.5    6.5.1     Identification of timer A.
                                                                                                    (1)
                 Mechanical timer.
       6.5.2     TWO disadvantages of timer B.
                    Difficult to set up/operate.
                    Battery needs to be replaced regularly.
                    Electronic parts need to be properly sealed.                     (Any 2)      (2)
       6.5.3     The timer that has a multiple programming function.
                 Timer B.                                                                          (1)
6.6    THREE advantages of using the faucet water filtration system.
            Does not require the boiling of water.
            Quick process of purifying water.
            Filters are easy accessible on the kitchen top.
            Can be switched on and off.
            Cartridges are fairly inexpensive and easy to change.                    (Any 3)      (3)
6.7    A monitoring system for each scenario in the table below.

           Scenario                                Monitoring system
           Precisely control the rate of           6.7.1 Variable-rate Technology.
           application of fertilizer.
           Determine areas of under growth.        6.7.2 Geographic Information
                                                   System/Drone/Thermal imaging.Yield                (2)
                                                   monitor.                                        [30]

                                                                        TOTAL SECTION B:            160
                                                                           GRAND TOTAL:             200
Copyright reserved

## Related documents

- [Agricultural Technology May June 2022 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-mg-afr/655a1b9b-18a2-4cf2-8f3a-991e76df10f1) — Agricultural Technology · Memo · 2022 · Afr
- [Agricultural Technology May June 2022 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-afr/ccd38003-2303-4ac6-b6d8-0c07141d8a3f) — Agricultural Technology · QP · 2022 · Afr
- [Agricultural Technology May June 2022 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-eng/8efb3673-3f48-4d22-aad9-4af8efb3c7be) — Agricultural Technology · QP · 2022 · Eng
- [Agricultural Technology May-June 2024 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-memorandum-english/57faf85a-afb6-414c-bf66-0e0ede28ff4b) — Agricultural Technology · Memo · 2024 · Eng
- [Agricultural Technology May-June 2023 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-afr/49b9303d-33e4-4f5e-adbe-90dbadf7c5b7) — Agricultural Technology · Memo · 2023 · Afr
- [Agricultural Technology May-June 2023 MG Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-eng/db10383d-7cc4-41f6-9140-68d351a16776) — Agricultural Technology · Memo · 2023 · Eng

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology May-June 2025 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2025-eng/277bcb3f-14d3-4d58-9b23-d192269c80e2) — QP · 2025 · Eng
- [Agricultural Technology Nov 2025 Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/d47614f1-1c99-4acc-87f4-eefd7c63d61e) — QP · 2025 · Eng
- [Agricultural Technology Nov 2025 Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/f45f941f-dd15-410f-97ae-f0ce8a673078) — QP · 2025 · Afr
- [Agricultural Technology Nov 2024 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-afr/f4723cfb-5760-424c-a00a-2c0e3b5e5dbb) — QP · 2024 · Afr
- [Agricultural Technology Nov 2024 Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-eng/f63c1a66-fac4-4a77-acdc-6e16d5d7293f) — QP · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
