# Agricultural Technology Grade 12 NSC June 2023 QP (Eng)

> Grade 12 Agricultural Technology question paper from the NSC June Exam 2023 (English), 17 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/agricultural-technology-may-june-2023-eng/6e72892b-deb8-4820-8758-b91c5592448a
- Updated: 2026-09-27
- Subject: Agricultural Technology
- Grade: Grade 12
- Document type: Question paper
- Year: 2023
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 17

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC June 2023 QP (Eng)](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-eng/6e72892b-deb8-4820-8758-b91c5592448a)

## About this document

Agricultural Technology · Grade 12 · NSC June Exam · 2023. Question paper, 17 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

             SENIOR CERTIFICATE EXAMINATIONS/
         NATIONAL SENIOR CERTIFICATE EXAMINATIONS

                          AGRICULTURAL TECHNOLOGY

                                         2023

                                                                     MARKS: 200

                                                                   TIME: 3 hours

                       This question paper consists of 17 pages.

Copyright reserved                                                 Please turn over

### Page 2

Downloaded from hlayiso.com
Agricultural Technology                             2                                  DBE/2023
                                                 SC/NSC

INSTRUCTIONS AND INFORMATION

1.        GENERAL INSTRUCTIONS AND INFORMATION

          1.1             This question paper consists of TWO sections, namely SECTION A
                          and SECTION B.

          1.2             BOTH sections are COMPULSORY.

          1.3             Answer ALL the questions in the ANSWER BOOK.

          1.4             Number the answers correctly according to the numbering system
                          used in this question paper.

          1.5             You may use a non-programmable calculator.

          1.6             Show ALL calculations.

          1.7             Write neatly and legibly.

2.        SECTION A: SHORT QUESTIONS

          2.1             This section consists of THREE questions.

          2.2             Follow the instructions when answering the questions.

3.        SECTION B: STRUCTURED LONG QUESTIONS

          3.1             This section consists of FIVE questions.

          3.2             Start EACH question on a NEW page.

Copyright reserved                                                                Please turn over

### Page 3

Downloaded from hlayiso.com
Agricultural Technology                             3                                   DBE/2023
                                                 SC/NSC

SECTION A

QUESTION 1

1.1       Various options are provided as possible answers to the following questions.
          Choose the answer and write only the letter (A–D) next to the question
          numbers (1.1.1 to 1.1.10) in the ANSWER BOOK, e.g. 1.1.11 D.

          1.1.1           The … cutting apparatus uses a tungsten electrode to carry an
                          electrical arc for cutting metals.

                          A   water jet
                          B   laser
                          C   plasma
                          D   oxyacetylene

          1.1.2           Which ONE of the following gases is NOT suitable for use during
                          the plasma-cutting process?

                          A   Acetylene
                          B   Nitrogen
                          C   Argon
                          D   Oxygen

          1.1.3           Which ONE of the following statements is NOT an advantage of
                          MIG welding?

                          A   No need to change the electrode constantly
                          B   Can be used in windy conditions
                          C   The process is easily automated
                          D   Better welding pool visibility because of the absence of slag

          1.1.4           This type of metal makes welding difficult and it is recommended
                          that the surface area is removed with a grinder:

                          A   Titanium
                          B   Copper
                          C   Stainless steel
                          D   Galvanised metal

          1.1.5           An advantage of using an inverter welder is that …

                          A   no slag needs to be removed after the welding process.
                          B   copper can be welded.
                          C   it is lightweight and easy to carry around.
                          D   no electricity is needed.

Copyright reserved                                                                 Please turn over

### Page 4

Downloaded from hlayiso.com
Agricultural Technology                               4                                    DBE/2023
                                                   SC/NSC

          1.1.6           The turbine that generates electrical energy in a hydroelectric
                          power station is connected to a …

                          A   generator.
                          B   stator.
                          C   photovoltaic cell.
                          D   solar cell.

          1.1.7           This part of a septic drain system allows a person to inspect the
                          inside of the drain system:

                          A   Distribution field
                          B   Manhole
                          C   Hopper
                          D   Baffle

          1.1.8           Excessive wind speed of a combine harvester causes ...

                          A   kernels to be blown out by the blower of the machine.
                          B   kernels of different sizes to be collected in the collection bin.
                          C   V-belts to be thrown from their pulleys.
                          D   kernels not being removed from the stalks.

          1.1.9           A … prevents pressure build-up in the tank of a septic drain.

                          A   ventilation opening
                          B   flashback arrester
                          C   type of bacterium
                          D   venturi

          1.1.10          The adhesive that is the most suitable for assembling the glass
                          panels of an aquarium:

                          A   Epoxy
                          B   Silicon
                          C   Resorcinol
                          D   Latex                                                      (10 x 2)        (20)

Copyright reserved                                                                    Please turn over

### Page 5

Downloaded from hlayiso.com
Agricultural Technology                          5                                    DBE/2023
                                              SC/NSC

1.2       Change the UNDERLINED word(s) in the following sentences to make the
          statements TRUE. Write only the appropriate word(s) next to the question
          numbers (1.2.1 to 1.2.5) in the ANSWER BOOK, e.g. 1.2.6 Tractor.

          1.2.1      The welding plane continuously changes as the welder welds a run
                     in the fixed pipe welding position.

          1.2.2      Cladding is the welding process that is used to build up a plough
                     shear by padding it with a wear-resistant metal.

          1.2.3      The push direction is stronger than the pull direction of the hydraulic
                     cylinder because a larger stroke length is subjected to the oil
                     pressure.

          1.2.4      A bearing is a machine component that creates friction between a
                     moving component and a shaft.

          1.2.5      The pick-up mechanism on a ram-type baler moves in and out to
                     feed the hay into the baling chamber.                 (5 x 2)                  (10)

1.3       Choose a word/term in COLUMN B that matches the description in
          COLUMN A. Write only the letter (A–J) next to the question numbers
          (1.3.1 to 1.3.5) in the ANSWER BOOK, e.g. 1.3.6 K.

                            COLUMN A                                COLUMN B
          1.3.1      This happens when steel is heated     A      expansion
                     to a high point and then cooled
                     down again                            B      cast iron

          1.3.2      Occurs on the surface of certain      C      shrinking
                     metals because of oxidation
                                                           D      electrolysis
          1.3.3      The material that is used in the
                     manufacturing of tractor engine       E      reverse osmosis
                     blocks where weight plays an
                     important role                        F      rust

          1.3.4      The technology that controls the      G      VRT
                     application rate of fertiliser on a
                     precision planter                     H      mechanical timer

          1.3.5      A garden irrigation controller that   I      tensiometer
                     does not need an external power
                     source                                J      aluminium
                                                                                      (5 x 2)       (10)

                                                                      TOTAL SECTION A:              40

Copyright reserved                                                               Please turn over

### Page 6

Downloaded from hlayiso.com
Agricultural Technology                             6                               DBE/2023
                                                 SC/NSC

SECTION B

QUESTION 2: MATERIALS AND STRUCTURES

Start this question on a NEW page.

2.1       Machining Vesconite holds no health risks for the persons working with it.

          2.1.1           Explain the statement above by giving THREE reasons to confirm
                          the answer.                                                             (3)

          2.1.2           Name TWO products that could be manufactured from Vesconite.            (2)

2.2       Answer the following questions regarding tin.

          2.2.1           What is the colour of tin?                                              (1)

          2.2.2           Name THREE instances where tin alloys are used commercially.            (3)

2.3       Stainless steel is an alloy steel that can be used in various applications on the
          farm.

          How can the magnetism property of stainless steel be reduced without                    (1)
          affecting its tensile strength?

2.4       Internal stress is induced in brass when it is cold worked. Describe the
          process of relieving this internal stress without compromising the properties of
          brass.                                                                                  (2)

2.5       Name TWO uses of phosphor bronze.                                                       (2)

2.6       Genkem contact adhesive is a strong, fast-drying, multipurpose adhesive
          designed to provide good adhesion properties when applied to a wide variety
          of household materials.

          2.6.1           Name FOUR household materials to which Genkem contact
                          adhesive can be applied effectively.                                    (4)

          2.6.2           Recommend FOUR ways to improve the strength of the joint when
                          applying a contact adhesive.                                            (4)

Copyright reserved                                                             Please turn over

### Page 7

Downloaded from hlayiso.com
Agricultural Technology                            7                                    DBE/2023
                                                SC/NSC

2.7       The picture below shows a type of animal fence used to restrict the movement
          of horses.

          2.7.1           Identify the type of fence shown in the picture and give a reason for
                          using this type of fence.                                                   (2)

          2.7.2           What is the function of the energiser used in the type of fence
                          identified in QUESTION 2.7.1?                                               (2)

          2.7.3           Name THREE properties of the isolators that are used to fix the
                          wire of an electric fence to the posts.                                     (3)

          2.7.4           What will happen if a person touches an electric fence that has a
                          higher amperage than is prescribed by law?                                  (2)

2.8       Identify parts A and B and state ONE function of each.

                                                                                                      (4)
                                                                                                      [35]

Copyright reserved                                                                 Please turn over

### Page 8

Downloaded from hlayiso.com
Agricultural Technology                            8                                   DBE/2023
                                                SC/NSC

QUESTION 3: ENERGY

Start this question on a NEW page.

3.1       Study the pictures of two alternative energy systems labelled A and B below
          and answer the questions that follow.

                                     A                                  B

          3.1.1           Which ONE of the systems, A or B, is suitable to provide electricity
                          to a water pump in a valley or mountainous area? Give a reason for
                          your answer.                                                               (2)

          3.1.2           State THREE advantages of system A when compared to
                          system B.                                                                  (3)

3.2       State THREE disadvantages of solar geysers.                                                (3)

3.3       Name THREE problems associated with an electric power station that uses
          coal as an energy source.                                                                  (3)

3.4       Describe the process of harnessing geothermal energy from the Earth to
          produce electricity.                                                                       (6)

3.5       Name THREE benefits of methanol when it is used as a supplement fuel for
          a vehicle.                                                                                 (3)
                                                                                                     [20]

Copyright reserved                                                                Please turn over

### Page 9

Downloaded from hlayiso.com
Agricultural Technology                            9                                     DBE/2023
                                                SC/NSC

QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

Start this question on a NEW page.

4.1      The pictures below show important equipment that is used on a farm.

                                  A                                      B

                                  C                                      D

         Choose a picture above that will match each of the following scenarios.
         Write only the letter (A–D) next to the question numbers (4.1.1 to 4.1.5),
         e.g. 4.1.6 E.

         4.1.1            The cutting of corroded metal where electricity is not available            (1)

         4.1.2            A compact welding machine, connected to a generator, is used to
                          repair a farm gate in the field                                             (1)

         4.1.3            Precision cutting of metal without using acetylene                          (1)

         4.1.4            Welding machine that does not need to have the welding rod
                          replaced regularly                                                          (1)

         4.1.5            The machine that does not use gas when operated                             (1)

Copyright reserved                                                                 Please turn over

### Page 10

Downloaded from hlayiso.com
Agricultural Technology                        10                                    DBE/2023
                                             SC/NSC

4.2      A farmer needs to build a ramp to load his motorbike onto his pickup truck.
         The ramp needs to be manufactured from angle iron.
         Study the design drawing of the ramp below and use the dimensions of the
         material that are provided to answer the questions.
         Angle iron for outside frame: 32 mm x 32 mm x 5 mm = R95,00/metre
         Angle iron for steps: 25 mm x 25 mm x 3 mm = R43,00/metre

         4.2.1       Study the table below and re-arrange the steps of the manufacturing
                     process in the correct sequence, e.g. 6, 9, 7, 10, 8.

                      STEPS               MANUFACTURING PROCESS
                        1   Clean the surface area where welding will take place.
                        2   Use the appropriate equipment to cut the angle iron into
                            the correct lengths.
                        3   Finish off and paint the ramp.
                        4   Measure and mark the correct lengths of the angle iron.
                        5   Spot-weld to ensure that the ramp components are fixed
                            in place and then complete the welding process.                        (5)

         4.2.2       Use the information above to calculate the total cost of the angle iron
                     that must be purchased to build the ramp.                                     (5)

Copyright reserved                                                              Please turn over

### Page 11

Downloaded from hlayiso.com
Agricultural Technology                      11                                 DBE/2023
                                           SC/NSC

4.3      Study the picture below of a component that is used on the MIG welding
         apparatus and answer the questions that follow.

         4.3.1       Name the component.                                                      (1)

         4.3.2       Explain the importance of setting the component to deliver the
                     correct gas pressure before starting with the welding process.           (4)

         4.3.3       What is the recommended gas pressure setting for effective welding
                     to take place?                                                           (1)

4.4      The picture below shows a person welding in the overhead arc welding
         position.

         4.4.1       Describe the overhead arc welding process.                               (5)

         4.4.2       Identify a safety measure that is taken by the welding operator to
                     protect himself. Give a reason for your answer.                          (2)

Copyright reserved                                                         Please turn over

### Page 12

Downloaded from hlayiso.com
Agricultural Technology                      12                                     DBE/2023
                                           SC/NSC

4.5      The oxyacetylene apparatus shown below is used for cutting and welding
         purposes.

         4.5.1       Name THREE types of personal protective equipment that must be
                     worn when performing a cutting task with the oxyacetylene cutting
                     apparatus.                                                                   (3)

         4.5.2       Name the cylinder that needs to be opened first before cutting
                     commences. Give ONE reason for your answer.                                  (2)

         4.5.3       It is recommended that both the cylinders always be used in an
                     upright position.

                     Do you agree with this statement? Motivate your answer.                      (2)
                                                                                                  [35]

Copyright reserved                                                             Please turn over

### Page 13

Downloaded from hlayiso.com
Agricultural Technology                          13                                 DBE/2023
                                               SC/NSC

QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT
Start this question on a NEW page.
5.1       Study the pictures of TWO types of silage cutters below and answer the
          questions that follow.

                                  A                                 B

          5.1.1       State FOUR mechanical problems that may be experienced with
                      the cutting mechanism of the machine in picture A.                          (4)
          5.1.2       Choose between A and B the most suitable silage cutter a
                      small-scale farmer can use to harvest his silage. Motivate your
                      answer.                                                                     (3)
          5.1.3       Describe the procedure that must be followed when the machine
                      shown in picture A is prepared for use.                                     (5)
5.2       Study the illustration of the three-point hydraulic system of a tractor below and
          answer the questions that follow.

          5.2.1           Why is it important to have grease nipples installed on the
                          universal joints of the power take-off (PTO) shaft?                     (1)
          5.2.2           Describe the function of component B.                                   (1)
          5.2.3           Component A must always be screened off to prevent serious
                          injuries. State THREE requirements of this type of screen.              (3)
Copyright reserved                                                             Please turn over

### Page 14

Downloaded from hlayiso.com
Agricultural Technology                           14                                     DBE/2023
                                                SC/NSC

5.3       The illustration below shows a tractor equipped with a front-end loader.

          5.3.1           State FOUR requirements that must be considered before buying a
                          tractor that needs to be equipped with a front-end loader.                  (4)

          5.3.2           State FOUR safety precautions to keep in mind when working
                          against a slope with a front-end loader.                                    (4)

5.4       The ram-type baler shown below is used to produce small rectangular bales.

          5.4.1           Name part A.                                                                (1)

          5.4.2           Explain how to change the bale density of a ram-type baler.                 (2)

          5.4.3           Describe the functions of the slip clutch on the ram-type baler.            (3)

Copyright reserved                                                                 Please turn over

### Page 15

Downloaded from hlayiso.com
Agricultural Technology                             15                                     DBE/2023
                                                  SC/NSC

5.5       The illustration below shows a differential that is used in the drive mechanism
          of a tractor.

                                                        B

                                     A

          5.5.1           Explain the reason for installing a differential on a tractor.                 (2)

          5.5.2           Name parts A and B in the illustration.                                        (2)

5.6       Defective diesel engines always show certain visible signs. Complete the
          table below by filling in the missing words. Write the missing word next to the
          question numbers (5.6.1 to 5.6.3) in the ANSWER BOOK.

                SYMPTOM                              DEFECT ON TRACTOR
                Black smoke                                     5.6.1
                    5.6.2                      Water leaks into combustion chamber.
                Blue smoke                                      5.6.3                                    (3)

5.7       Study the picture below and answer the questions that follow.

          5.7.1           Name the tool shown in the picture above.                                      (1)

          5.7.2           Name the power source that is used to provide drive to this tool.              (1)
                                                                                                         [40]

Copyright reserved                                                                    Please turn over

### Page 16

Downloaded from hlayiso.com
Agricultural Technology                          16                                   DBE/2023
                                               SC/NSC

QUESTION 6: WATER MANAGEMENT

Start this question on a NEW page.

6.1       The picture below shows a movable sprinkler irrigation system.

          6.1.1           Explain why this irrigation system is the most effective one to use
                          on small areas in irrigation fields.                                      (4)

          6.1.2       Describe the working of this irrigation system.                               (4)

6.2       The picture below shows a sprinkler of a centre-pivot irrigation system that is
          connected to a variable-rate technology (VRT) applicator.

          6.2.1       Explain the reason for connecting an irrigation sprinkler to a
                      variable-rate applicator.                                                     (1)

          6.2.2       Give TWO reasons for positioning the sprinklers at a specific height
                      above the crop.                                                               (2)

6.3       Explain the term irrigation scheduling.                                                   (2)

Copyright reserved                                                               Please turn over

### Page 17

Downloaded from hlayiso.com
Agricultural Technology                         17                                   DBE/2023
                                              SC/NSC

6.4       Name FOUR aspects that need to be considered before choosing a suitable
          site to build a sceptic tank system.                                                  (4)

6.5       Identify a drainage system that can be used in the following scenarios:

          6.5.1           To remove large amounts of rainwater from suburban areas              (1)

          6.5.2           To remove excess water from lawns                                     (1)

6.6       Describe how computer software can be used effectively in a modern
          irrigation system.                                                                    (2)

6.7       Name TWO devices that can be used to measure evapotranspiration in a
          field.                                                                                (2)

6.8       State TWO disadvantages of using distillation as a water purifying method.            (2)

6.9       Describe the process of water filtration with a jug filtration system.                (2)

6.10      Give THREE reasons for fitting farm machinery with a GPS unit.                        (3)
                                                                                                [30]

                                                                      TOTAL SECTION B:          160
                                                                         GRAND TOTAL:           200

Copyright reserved

## Related documents

- [Agricultural Technology May-June 2023 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-afr/0a79565a-1cf4-4b59-bd47-7c7ae750b4f3) — Agricultural Technology · QP · 2023 · Afr
- [Agricultural Technology May-June 2023 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-afr/49b9303d-33e4-4f5e-adbe-90dbadf7c5b7) — Agricultural Technology · Memo · 2023 · Afr
- [Agricultural Technology May-June 2023 MG Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-eng/db10383d-7cc4-41f6-9140-68d351a16776) — Agricultural Technology · Memo · 2023 · Eng
- [Agricultural Technology Nov 2023 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2023-afr/c3b8b589-9e64-4570-b82b-604d612b5c5d) — Agricultural Technology · QP · 2023 · Afr
- [Agricultural Technology Nov 2023 Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2023-eng/86f6afe6-d48c-4deb-850f-b5ecd800d688) — Agricultural Technology · QP · 2023 · Eng
- [Agricultural Technology May-June 2024 Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-question-paper-english/85728b95-5774-4d6d-85dd-de20dc4ca39b) — Agricultural Technology · QP · 2024 · Eng

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology May-June 2025 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2025-mg-afr/5f3f1dd7-8ba2-41ba-97bd-f8a4f9dfbdd5) — Memo · 2025 · Afr
- [Agricultural Technology Nov 2025 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/69e68c35-b84c-4320-b0d8-58fcb6116f22) — Memo · 2025 · Eng
- [Agricultural Technology Nov 2025 MG Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/84499f01-76f1-43ac-8b53-d844857b9e13) — Memo · 2025 · Afr
- [Agricultural Technology Nov 2024 MG Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-eng/5735a5ce-d167-4c13-bf13-9b5b710aed67) — Memo · 2024 · Eng
- [Agricultural Technology Nov 2024 MG Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-afr/fce88f27-4539-47d4-b4b5-d7ddad4cd2a6) — Memo · 2024 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
