# Agricultural Technology Grade 12 NSC June 2023 Memo (Eng)

> Grade 12 Agricultural Technology memorandum from the NSC June Exam 2023 (English), 12 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-eng/db10383d-7cc4-41f6-9140-68d351a16776
- Updated: 2026-10-29
- Subject: Agricultural Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2023
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 12

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC June 2023 Memo (Eng)](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-eng/db10383d-7cc4-41f6-9140-68d351a16776)

## About this document

Agricultural Technology · Grade 12 · NSC June Exam · 2023. Memorandum. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

             SENIOR CERTIFICATE EXAMINATIONS/
         NATIONAL SENIOR CERTIFICATE EXAMINATIONS

                          AGRICULTURAL TECHNOLOGY

                                         2023

                               MARKING GUIDELINES

                                                                     MARKS: 200

                     These marking guidelines consist of 12 pages.

Copyright reserved                                                   Please turn over

### Page 2

Downloaded from hlayiso.com
Agricultural Technology                       2                             DBE/2023
                                   SC/NSC – Marking guidelines

SECTION A

QUESTION 1

1.1   1.1.1     C

      1.1.2     A

      1.1.3     B

      1.1.4     D

      1.1.5     C

      1.1.6     A

      1.1.7     B

      1.1.8     A

      1.1.9     A

      1.1.10 B                                                                          (20)

1.2   1.2.1     Rolling. 

      1.2.2     Hard facing. 

      1.2.3     Area/Surface. 

      1.2.4     Reduces/Decreases. 

      1.2.5     Packing arms.                                                           (10)

1.3   1.3.1     C

      1.3.2     F

      1.3.3     B

      1.3.4     G

      1.3.5     H                                                                       (10)
                                                                 TOTAL SECTION A:         40

Copyright reserved                                                         Please turn over

### Page 3

Downloaded from hlayiso.com
Agricultural Technology                           3                               DBE/2023
                                      SC/NSC – Marking Guidelines

SECTION B

QUESTION 2: MATERIALS AND STRUCTURES

 2.1     2.1.1       THREE reasons why the machining of Vesconite holds no health risk for
                     the person working with it.

                         Does not contain any asbestos/hazardous fibres.
                         Does not contain any lead.
                         Does not give off any poisonous gases/smoke when machined.              (3)

         2.1.2       TWO products that could be manufactured from Vesconite.

                         Bushes.
                         Solid rods.
                         Wear plates.
                         Washers.                                             (Any 2)            (2)

 2.2     2.2.1       The colour of tin.

                         Silvery-white.                                                          (1)

         2.2.2       THREE instances where Tin-alloys are commercially used.

                         Soft solder.
                         Pewter.
                         Bronze.
                         Used as a coating for steel cans. 
                         Food containers.                                       (Any 3)          (3)

 2.3     How to reduce the magnetism property of stainless steel without affecting its
         tensile strength.

            Add chromium.
            Manganese.                                                          (Any 1)          (1)

 2.4     The process of relieving the internal stresses of brass.

         Use a low-temperature annealing process for 0.5 to 1 hours at 250-300 ºC,
         dependent on the project size.                                                           (2)

 2.5     TWO uses of phosphor bronze.

            Precision-grade bearings.
            Springs.                                                                             (2)

Copyright reserved                                                              Please turn over

### Page 4

Downloaded from hlayiso.com
Agricultural Technology                            4                                     DBE/2023
                                       SC/NSC – Marking Guidelines

 2.6     2.6.1       FOUR household materials where Genkem contact adhesive can be
                     used as an adhesive.
                         Leather.
                         Glass.
                         Wood.
                         Fabrics.
                         Rubber.
                         Metal.
                         Plastics.                                                     (Any 4)          (4)
         2.6.2       FOUR ways to improve the strength of the joint when using a contact
                     adhesive.
                         Apply a thin base coat if the surface is very porous.
                         Apply only a thin layer of adhesive. Avoid thick layer of adhesive on
                          a joint.
                         Apply adhesive to both surfaces.
                         Surface must be clean.
                         Make the surface rough.
                         Use the correct type of adhesive.
                         Wait 10 min until dry before joining.
                         Needs to be heated.                                          (Any 4)           (4)
 2.7     2.7.1       A type of fence and the reason for using this fence.

                         Temporary/movable electrical fence.
                         Used to hold/control/isolate animals for a short period.                       (2)

         2.7.2       The function of the electric fence energizer.
                         Convert the battery- or mains power into a high voltage pulse/
                          shock when the animal touches the fence.                                      (2)
         2.7.3       The properties of the isolators that fix the wire of an electric fence to the
                     posts.
                         Not conduct electricity.
                         Water resistance.
                         Durable/long lasting.
                         Easily replaceable 
                         Easy to use.                                                   (Any 3)         (3)

         2.7.4       Consequences for the person touching an electric fence that has a
                     higher amperage than prescribed by law.
                     The result of too high amperage will be that a person will sustain a
                     shock that can cause injury/tissue damage or heart failure.                        (2)
 2.8     Identify part A and B and the function of each.

         A – Armoured wire. Protects the cable against mechanical damage.
         B – Isolation material. Protects the inner cable against water/moist.                          (4)
                                                                                                          [35]
Copyright reserved                                                                     Please turn over

### Page 5

Downloaded from hlayiso.com
Agricultural Technology                           5                                    DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 3: ENERGY
3.1     3.1.1        The systems that is suitable to provide electricity for a water pump.

                     A Mountains direct the wind in the wind turbine 
                     OR
                     B Mountains block the wind                                                        (2)

        3.1.2        THREE advantages of system A (wind) when compare to B (solar).
                         Compact.
                         Cheap.
                         Easy to move.
                         Low maintenance.
                         Easy to install.
                         Can operate when there is no sun. 
                         No need to be cleaned.                                      (Any 3)
                                                                                                         (3)
3.2     THREE disadvantages of solar geysers
            Susceptible to corrosion and scaling.
            Very heavy.
            High maintenance.
            Expensive.
            No hot water on a cloudy day or during nighttime.
            Can overheat.
            Must be orientated correctly.
            Can be damaged by bad weather conditions.                                (Any 3)
                                                                                                         (3)
3.3     THREE problems associated with a coal power station.
            Pollution.
            Unreliable.
            High maintenance.
            Transport of coal is expensive.
            Rely on fossil fuels.                                                    (Any 3)           (3)

3.4     The process of extracting geothermal energy to produce electricity.
            Deep holes drilled into the earth to find a geothermal hot spot.
            A pipe/sleeve is installed inside the hole.
            Cold water is pumped into the hole to be heated by the heat source.
            The pressurized steam rises up to the surface.
            The steam is channelled to a turbine that begins to turn.
            This turbine is connected to the generator that generates the electricity.
                                                                                                         (6)
3.5     THREE benefits of methanol when used as a supplement fuel for a vehicle.
            It offers lower exhaust emissions.
            Higher vehicle performance.
            It can easily be converted into hydrogen.
            Has a lower risk of flammability than petrol.                            (Any 3)           (3)
                                                                                                         [20]
Copyright reserved                                                                    Please turn over

### Page 6

Downloaded from hlayiso.com
Agricultural Technology                          6                                       DBE/2023
                                     SC/NSC – Marking Guidelines

QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

4.1     4.1.1        Cutting of corroded metal where no electricity is available.

                     C                                                                                    (1)

        4.1.2        Small compact welding machine used to repair a farm gate in the field,
                     using a small generator to produce electricity.

                     D                                                                                    (1)

        4.1.3        Precision cutting without the use of acetylene.

                     A                                                                                    (1)

        4.1.4        Welding machine without a welding rod.

                     B                                                                                    (1)

        4.1.5        Machine that does not require gas.

                     D                                                                                    (1)

4.2     4.2.1        Correct order: 4, 2, 1, 5, 3,                                                    (5)

        4.2.2        Total cost of the angle iron used to complete the ramp.

                     Angle iron (32 mm x 32 mm): 2 000 mm+2 000 mm + 500 mm =
                     4 500 mm (4,5 m) 
                                            4,5 m x R95,00 = R427,50

                     Angle iron: (25 mm x 25 mm) 9 x 400 mm = 3 600 mm (3,6 m) 
                                               3,6 m x R43,00 = R154,80

                     Total cost:        R427,50 + R154,80 = R582,30
                     (Allow for different interpretations during the marking process)                      (5)

4.3     4.3.1        Identify the component.

                     Gas flow regulator.                                                                  (1)

Copyright reserved                                                                      Please turn over

### Page 7

Downloaded from hlayiso.com
Agricultural Technology                            7                                      DBE/2023
                                       SC/NSC – Marking Guidelines

        4.3.2        The importance of setting the component correctly before proceeding
                     with the welding process.

                         To prevent spatter.
                         To ensure a constant weld.
                         To shield the weld properly.
                         Without the gas, your the welds will look brown, spattered and just
                          generally not very nice.
                         To prevent porosity.                                     (Any 4)                (4)

        4.3.3        Working pressure for the MIG welding process.

                     Between 10 and 25 PSI.                                                               (1)

4.4     4.4.1        Description of the overhead arc welding technique.

                         Use an arc as short as possible. 
                         Weld a number of runs without any lateral movement. 
                         When molten metal starts dripping, slightly reduce the amperage. 
                         Move electrode/gun slightly faster. 
                         Hold electrode/gun in same position as in relation to base metal.               (5)

        4.4.2        Safety measure of overhead welding, with a reason.

                         Operator use leather gloves/fire retartend overall/full face welding
                          helmet/hard hat.
                         To protect him from molten metal that drips from work piece and
                          might cause serious damage to skin/ body.                                       (2)

4.5     4.5.1        THREE personal protective equipment that must be worn when
                     performing a task with the oxyacetylene apparatus.

                         Over all.
                         Leather gloves.
                         Leather apron.
                         Safety boots/Fire resistant shoes.
                         Leather spats.
                         Oxy-acetylene welding goggles/helmet.                          (Any 3)          (3)

        4.5.2        The gas cylinder that needs to be opened first, with a reason.

                         Acetylene.
                         Acetylene is the flammable gas.                                                 (2)

        4.5.3        Agree with this statement and motivate the answer.

                          Yes. Gas usage will not be effective when the bottles are lying on
                          its side because the gas will be turned into a liquid making it difficult
                          to pass through the gas pipes.                                                  (2)
                                                                                                           [35]

Copyright reserved                                                                      Please turn over

### Page 8

Downloaded from hlayiso.com
Agricultural Technology                            8                                     DBE/2023
                                       SC/NSC – Marking Guidelines

QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT
5.1     5.1.1        FOUR mechanical problems that can be experienced with the cutting
                     mechanism.
                         Blunt/broken blades that cause a blockage.
                         Blunt/broken cutting rotor.
                         Seized bearings.
                         Worn belts and chains.
                         No lubrication.
                         Rust on the parts.
                         Obstructions in the mechanism.                                 (Any 4)         (4)

        5.1.2        Choose between A and B. Motivate your answer.
                     B                                                                       (1)
                         Low initial purchasing cost.
                         Easy to maintain.
                         Efficient in small fields.
                         Lower maintenance cost.
                         Low running cost.
                         Not necessary for an extra tractor with a trailer.            (Any 2)          (3)
        5.1.3        The procedures of preparing a machine before working with it.
                         All grease points must be well greased.
                         The correct tension must be set for all belts and chains.
                         Check that all parts are functioning correctly by operating it slowly.
                         Replace all worn parts immediately especially the cutter blades.
                         Service according to manufacturer’s specifications.
                         Lift up all dust release guards.
                         Check that there is no damage to the blades and that they are
                          sharp.
                         Check the tyre pressure.
                         Check the oil and water levels.                                 (Any 5)        (5)

5.2     5.2.1        Function of grease nipples.
                     An external grease point to apply the grease for the universal.                     (1)
        5.2.2        Function of component B.
                     To keep the connected implement in the centre at the back of the
                     tractor or to stabilise the implement.                 (Any 1)                     (1)
        5.2.3        THREE requirements for screens.

                         Strong
                         Not become loose
                         Weight saving
                         Must provide adequate/efficient protection.
                         Bright colour screens for clear visibility.                   (Any 3)          (3)

Copyright reserved                                                                     Please turn over

### Page 9

Downloaded from hlayiso.com
Agricultural Technology                            9                                      DBE/2023
                                       SC/NSC – Marking Guidelines

        5.3.1        FOUR factors to be considered before buying a new tractor that needs
                     to be equipped with a front-end loader.

                         4x4.
                         Power steering.
                         Rigidity of construction.
                         Driver safety and comfort.
                         Driving power.
                         Connection points for front loader hydraulics.
                         Size of front tyres.
                         Lifting capacity of the front-end loader.
                         Broken/damaged parts.                                          (Any 4)          (4)

        5.3.2        FOUR safety precautions when working with a front-end loader against
                     a slope.

                         Only operate the loader against the vertical angle of the slope.
                         Stay away from the outer edge when working along high banks and
                          slopes.
                         Carry the load low to the ground and watch for obstructions on the
                          ground.
                         Always use the recommended amount of counterweight to ensure
                          good stability.
                         All tractors used to move bales should have rollover protective
                          structures (ROPS).
                         Tractor operators should utilize the tractor seat belt at all times when
                          operating the tractor, regardless of the task that is being done.
                                                                                            (Any 4)        (4)

5.4     5.4.1        Name part A.

                     A-    Pick-up mechanism/teeth/needles/fingers.                                       (1)

        5.4.2        Changing bale density on a ram-type baler.

                     By increasing or decreasing the resistance to the hay moving through
                     the baling chamber.                                                                  (2)

        5.4.3        The functions of the slip clutch on the ram-type baler.

                         Prevent heavy objects from being taken into the baler.
                         Protect the pick-up if it is impeded by anything.
                         Protect the auger if it becomes overloaded.                                     (3)

Copyright reserved                                                                      Please turn over

### Page 10

Downloaded from hlayiso.com
Agricultural Technology                          10                                DBE/2023
                                      SC/NSC – Marking Guidelines

5.5     5.5.1        Reason why a differential is fitted on a tractor.

                     Differential is used to divide the rotation equal between the two rear
                     wheels,change the direction of rotationand to affect speed
                     reduction.                                                    (Any 2)         (2)

        5.5.2        Name parts A and B.

                     A - Driving shaft.
                     B - Crown wheel gear.                                                         (2)

5.6     Complete the table:

                  SYMPTOM                    DEFECT ON TRACTOR
                 Black smoke        5.6.1
                 5.6.2              Water leaks into combustion chamber.
                 Blue smoke         5.6.3

        5.6.1            Diesel mixture too rich.
                         Worn/faulty injectors.                                  (Any 1)          (1)

        5.6.2        White smoke.                                                                  (1)

        5.6.3            Engine uses oil.
                         Piston rings are worn.
                         Cylinder sleeves are worn.
                         Valve stem seals are worn.                              (Any 1)          (1)

5.7     5.7.1        Name of the tool.

                     Pneumatic/Air wrench/Drill with a drill attachment.                           (1)

        5.7.2        Power source used.

                     Air/Compressor.                                                               (1)
                                                                                                    [40]

Copyright reserved                                                               Please turn over

### Page 11

Downloaded from hlayiso.com
Agricultural Technology                          11                                     DBE/2023
                                      SC/NSC – Marking guidelines

QUESTION 6: WATER MANAGEMENT

6.1     6.1.1        Reasons why movable sprinkler irrigation systems is the most effective
                     for using on small pieces of irrigation fields.

                         Inexpensive to purchase.
                         Low maintenance cost.
                         Low running cost.
                         Low labour needs.
                         The reach of the system is more suitable for small fields because of
                          the limited length of the pipe.                              (Any 4)           (4)

        6.1.2        Working of the movable/drum/travelling irrigation system.

                         The system makes use of polyethylene tubing coiled on a steel
                          drum.
                         It is powered by irrigation water or a small engine .
                         The sprinkler is pulled across the field by its own cable system.
                         The system shuts down automatically when the sprinkler reaches
                          the end of the line.
                         A large sprinkler attached to the systems applies water in a circular
                          pattern.                                                      (Any 4)          (4)

6.2     6.2.1        Reason for connecting an irrigation sprinkler to a Variable Rate
                     Applicator.

                     To adapt the rate of water application to various needs as occurring in
                     the irrigation field.                                                               (1)

        6.2.2        Reasons for the sprinklers positioned at a specific height above the
                     crop.

                         To limit evaporation.
                         To ensure effective distribution of the water.
                         To prevent the sprinkler from interference by the plants.     (Any 2)          (2)

6.3     Explanation of the term irrigation scheduling.

        It is the process used by irrigation system managers to determine the correct
        frequency/flow and duration of watering.                                                         (2)

6.4     FOUR aspects that must be considered when choosing a suitable site for building
        a sceptic tank system.

            Must be installed a safe distance from houses, boreholes, traffic and drinking
             water installations, rivers, streams, underground aquifers.
            A sceptic tank must be below ground level.
            The drainage field must channel the wastewater away from houses.
            Not installed uphill from the house.
            Availing wind directions must be considered to accommodate odours or
             smells.                                                               (Any 4)               (4)

Copyright reserved                                                                     Please turn over

### Page 12

Downloaded from hlayiso.com
Agricultural Technology                          12                                   DBE/2023
                                      SC/NSC – Marking guidelines

6.5     Identification of a drainage system.
6.5     6.5.1        To remove large amounts of rainwater from suburban areas.

                     Chanel drain.                                                              (1)

        6.5.2        To remove excess water from lawns.

                     Perforated pipes.
                     Drainage ditch.                                               (Any 1)      (1)

6.6     Effective use of computer software in an irrigation system.

            Prevent over and under irrigation by regulating the water supply.
            Remote operation capability.
            Variable Rate Irrigation Sprinkler integration/adaptability/capability.
            It controls the time, duration and tempo of water supply.
            It receives inputs from different monitoring devices.
            It receives information from different remote information sources.
            Programmable.
            Control liquid fertilizer application.                                  (Any 2)    (2)

6.7     TWO devices that measure evapotranspiration in a field.

            Tensio-meter.
            Evaporation pan/class-A pan.                                                       (2)

6.8     TWO disadvantages of distillation as a water purifying method.

            Distillation cannot remove chemicals.
            It is a time consuming method.
            Energy consuming method.                                               (Any 2)     (2)

6.9     Method of filtration of water with a jug filter system.

            Water is poured into the top of the jug.
            The water works its way downward through the filtration medium.                    (2)

6.10    THREE reasons for fitting farm machinery with a GPS.

            For precision agriculture.
            To pinpoint location of machinery.
            Necessary for autonomous machinery.
            To apply VRT.
            To measure speed for accurate application of fertilizer and chemicals. 
                                                                                  (Any 3)        (3)
                                                                                                 [30]

                                                                       TOTAL SECTION B:          160
                                                                          GRAND TOTAL:           200

Copyright reserved

## Related documents

- [Agricultural Technology May-June 2023 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-afr/49b9303d-33e4-4f5e-adbe-90dbadf7c5b7) — Agricultural Technology · Memo · 2023 · Afr
- [Agricultural Technology May-June 2023 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-eng/6e72892b-deb8-4820-8758-b91c5592448a) — Agricultural Technology · QP · 2023 · Eng
- [Agricultural Technology May-June 2023 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-afr/0a79565a-1cf4-4b59-bd47-7c7ae750b4f3) — Agricultural Technology · QP · 2023 · Afr
- [Agricultural Technology Nov 2022 MG Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2022-mg-afr/5ad9323a-6205-448b-a33a-62918ebd56aa) — Agricultural Technology · Memo · 2023 · Afr
- [Agricultural Technology Nov 2022 MG Final](https://www.hlayiso.com/library/agricultural-technology-nov-2022-mg-final/2963d23d-2657-4839-bed7-da61fa157261) — Agricultural Technology · Memo · 2023
- [Agricultural Technology May-June 2024 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-memorandum-english/57faf85a-afb6-414c-bf66-0e0ede28ff4b) — Agricultural Technology · Memo · 2024 · Eng

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology May-June 2025 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2025-eng/277bcb3f-14d3-4d58-9b23-d192269c80e2) — QP · 2025 · Eng
- [Agricultural Technology Nov 2025 Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/d47614f1-1c99-4acc-87f4-eefd7c63d61e) — QP · 2025 · Eng
- [Agricultural Technology Nov 2025 Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/f45f941f-dd15-410f-97ae-f0ce8a673078) — QP · 2025 · Afr
- [Agricultural Technology Nov 2024 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-afr/f4723cfb-5760-424c-a00a-2c0e3b5e5dbb) — QP · 2024 · Afr
- [Agricultural Technology Nov 2024 Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-eng/f63c1a66-fac4-4a77-acdc-6e16d5d7293f) — QP · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
