# Agricultural Technology Grade 12 NSC June 2025 QP (Eng)

> Grade 12 Agricultural Technology question paper from the NSC June Exam 2025 (English), 16 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/agricultural-technology-may-june-2025-eng/277bcb3f-14d3-4d58-9b23-d192269c80e2
- Updated: 2026-09-27
- Subject: Agricultural Technology
- Grade: Grade 12
- Language: English
- Document type: Question paper
- Year: 2025
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 16

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC June 2025 QP (Eng)](https://www.hlayiso.com/library/agricultural-technology-may-june-2025-eng/277bcb3f-14d3-4d58-9b23-d192269c80e2)

## About this document

Agricultural Technology · Grade 12 · NSC June Exam · 2025 · English. Question paper, 16 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Confidential

             SENIOR CERTIFICATE EXAMINATIONS/
         NATIONAL SENIOR CERTIFICATE EXAMINATIONS

                        AGRICULTURAL TECHNOLOGY

                                 MAY/JUNE 2025

                                                                  MARKS: 200

                                                                 TIME: 3 hours

                     This question paper consists of 16 pages.

Copyright reserved                                               Please turn over

### Page 2

Agricultural Technology                         2                            DBE/May/June 2025
                                         SC/NSC Confidential

INSTRUCTIONS AND INFORMATION

1.        GENERAL INSTRUCTIONS AND INFORMATION

          1.1        This question paper consists of TWO sections, namely SECTION A
                     and SECTION B.

          1.2        BOTH sections are COMPULSORY.

          1.3        Answer ALL the questions in the ANSWER BOOK.

          1.4        Number the answers correctly according to the numbering system
                     used in this question paper.

          1.5        You may use a non-programmable calculators.

          1.6        Show ALL calculations.

          1.7        Write neatly and legibly.

2.        SECTION A: SHORT QUESTIONS

          2.1        This section consists of THREE questions.

          2.2        Follow the instructions when answering the questions.

3.        SECTION B: STRUCTURED LONG QUESTIONS

          3.1        This section consists of FIVE questions.

          3.2        Start EACH question on a NEW page.        2025

Copyright reserved                                                              Please turn over

### Page 3

Agricultural Technology                              3                          DBE/May/June 2025
                                              SC/NSC Confidential

SECTION A

QUESTION 1

1.1       Various options are provided as possible answers to the following questions.
          Choose the answer and write only the letter (A–D) next to the question
          numbers (1.1.1 to 1.1.10) in the ANSWER BOOK, e.g. 1.1.11 D.

          1.1.1           The purpose of a bearing is to …

                          A   facilitate the power take-off shaft to turn at an angle.
                          B   manage the speed of the variable-rate technology sensor.
                          C   transfer rotation from the input shaft to the output shaft.
                          D   reduce friction between a shaft and machine component.

          1.1.2           An irrigation system that distributes pressurised water to a field
                          with the use of sprayers that apply water downwards:

                          A   Drip irrigation
                          B   Overhead irrigation
                          C   Flood irrigation
                          D   Furrow irrigation

          1.1.3           A filtering system installed in an irrigation system to filter out
                          undesirable material from the water to prevent blockages of the
                          sprayers:

                          A   Sand filter
                          B   Oil filter
                          C   Air filter
                          D   Carbon filter

          1.1.4           A special electrode is used in this type of welding process to make
                          the process easier because the welding joint 'freezes' more quickly:

                          A   Hard facing
                          B   Vertical up arc welding
                          C   Induction welding
                          D   MIG welding

          1.1.5           … is a synthetic material with a melting point of 327 °C.

                          A   Rubber
                          B   Teflon
                          C   Fibreglass
                          D   PVC

Copyright reserved                                                                    Please turn over

### Page 4

Agricultural Technology                           4                           DBE/May/June 2025
                                           SC/NSC Confidential

          1.1.6           A hard metal alloy with antimicrobial properties and resistant to
                          corrosion, chemicals, acids and alkali:

                          A   Mild steel
                          B   Stainless steel
                          C   Cast iron
                          D   Vesconite

          1.1.7           Fixed capital as an economic factor:

                          A   Land, buildings and boreholes
                          B   Parts, fuel and wages
                          C   Depreciation
                          D   Repairs, contract work and transport

          1.1.8           This adhesive will fail when used to join two materials that will be
                          used in wet conditions:

                          A   Silicon
                          B   PVA
                          C   Latex
                          D   Epoxy

          1.1.9           Black smoke indicates that the tractor's …

                          A   fuel system is dysfunctional.
                          B   water leaks into the combustion chamber.
                          C   engine uses too much oil.
                          D   diesel mixture is too rich.

          1.1.10          The … is used to supply compressed air for operating tools, such
                          as pneumatic wrenches and spray-paint tools.

                          A   inverter
                          B   fan
                          C   grease gun
                          D   compressor                                              (10 x 2)       (20)

Copyright reserved                                                                Please turn over

### Page 5

Agricultural Technology                           5                                    DBE/May/June 2025
                                           SC/NSC Confidential

1.2       Change the UNDERLINED word(s) in each of the following statements to
          make the statements TRUE. Write only the appropriate word(s) next to the
          question numbers (1.2.1 to 1.2.5) in the ANSWER BOOK, e.g. 1.2.6 Tractor.

          1.2.1           Water filtering is used in irrigation management to determine the
                          correct frequency, quantity and duration of irrigation.

          1.2.2           The French drain serves as a structure where household waste
                          material gradually gets broken down by bacterial action.

          1.2.3           The plasma-cutting process involves the use of a tungsten
                          electrode and high-pressure plasma to generate and carry an
                          electrical arc between a plastic nozzle and the work piece.

          1.2.4           Teflon is a thermoplastic material made from internally lubricated
                          polymers.

          1.2.5           An electric motor and V-belt system are installed at the base of the
                          wind turbine's blades to change the pitch of the blades to
                          compensate for different wind speeds.                        (5 x 2)               (10)

1.3       Choose a word/term from COLUMN B that matches a description
          in COLUMN A. Write only the letter (A–J) next to the question numbers
          (1.3.1 to 1.3.5) in the ANSWER BOOK, e.g. 1.3.6 K.

                      COLUMN A                                           COLUMN B
          1.3.1 A standard type of gas used to          A        stainless steel
                cut carbon steel with the
                plasma-cutting machine                  B        oxygen

          1.3.2 A type of metal that can be cut         C        fork lift
                with an oxyacetylene cutting
                set                                     D        aluminium

          1.3.3 Equipment used in the field to          E        acetylene
                move and stack large round
                bales                                   F        front-end fork lift

          1.3.4 Detects the wind speed and              G        anemometer
                direction on a wind turbine
                                                        H        ductility
          1.3.5 Refers to the ability of a metal
                to stretch without breaking      I               hardness

                                                        J        tensiometer
                                                                                                 (5 x 2)     (10)

                                                                              TOTAL SECTION A:               40

Copyright reserved                                                                        Please turn over

### Page 6

Agricultural Technology                     6                            DBE/May/June 2025
                                     SC/NSC Confidential

SECTION B

QUESTION 2: MATERIALS AND STRUCTURES

Start this question on a NEW page.

2.1       Name TWO alloy elements in stainless steel that reduce magnetism.                     (2)

2.2       Complete the table below by writing only the correct answer next to the
          question numbers (2.2.1 to 2.2.4) in the ANSWER BOOK.

             METAL ALLOY              COMPOUND                    APPLICATION
                Brass                Copper and zinc                   2.2.1
                                                                       2.2.2
                     Bronze                2.2.3                Bronze sculptures,
                                           2.2.4                  bearings, clips,
                                                               electrical connectors
                                                                   and springs                  (4)

2.3       Give THREE reasons why tin is a suitable material to use for the coating on
          food cans.                                                                            (3)

2.4       Bakelite is a synthetic material used in various applications. Name ONE
          property and ONE use of this material.                                                (2)

2.5       Give the term used for describing the inherent strength of an adhesive.               (1)

2.6       List FOUR properties that make fibreglass a suitable material to manufacture
          seed bins for planters.                                                               (4)

2.7       State THREE advantages of using Vesconite in the agricultural sector.                 (3)

2.8       Explain why Teflon is used as a surface coating in the manufacturing of
          cooking utensils.                                                                     (4)

Copyright reserved                                                           Please turn over

### Page 7

Agricultural Technology                          7                          DBE/May/June 2025
                                          SC/NSC Confidential

2.9       The pictures below show TWO types of wire tensioners used on electrical
          fences.

                                  A                                     B

                                                                   C

          2.9.1           Identify the wire tensioners in PICTURES A and B above.                 (2)

          2.9.2           Which ONE of the above tensioners is most suitable for applying
                          tension to fence wires that extend over long distances?                 (1)

          2.9.3           Arrow C in Picture B shows an isolator. Name TWO materials that
                          are used to manufacture this type of isolator.                          (2)

2.10      Name TWO types of batteries that can be used to provide power to the
          energiser of an electric fence.                                                         (2)

2.11      List THREE points to remember when placing safety signs on an electrical
          fence.                                                                                  (3)

2.12      Name a suitable material that can be used to manufacture the earth spikes
          of an electrical fence. Motivate your answer.                                           (2)
                                                                                                  [35]

Copyright reserved                                                             Please turn over

### Page 8

Agricultural Technology                          8                         DBE/May/June 2025
                                          SC/NSC Confidential

QUESTION 3: ENERGY

Start this question on a NEW page.

3.1       Study the photo of a photovoltaic solar system below and answer the
          questions that follow.

          3.1.1           State THREE methods that can be used to protect the surfaces of
                          the solar panels, shown in the photo above, from the elements of
                          nature.                                                                 (3)

          3.1.2           Name the unit used to measure the output power of the system
                          shown above.                                                            (1)

          3.1.3           Discuss FOUR aspects that have an influence on the efficiency of
                          the photovoltaic solar system.                                          (4)

          3.1.4           Name the energy source obtained from the sun rays to generate
                          electricity with a photovoltaic solar system.                           (1)

3.2       Name THREE benefits of wind turbines on a farm.                                         (3)

3.3       Describe the limitations in the exploration of a geothermal energy source.              (4)

3.4       Tabulate TWO advantages and TWO disadvantages of biofuel.                               (4)
                                                                                                  [20]

Copyright reserved                                                             Please turn over

### Page 9

Agricultural Technology                           9                           DBE/May/June 2025
                                           SC/NSC Confidential

QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

Start this question on a NEW page.

4.1       Study the scenario below and answer the questions that follow.

          A farmer needs to fix a broken gate on the farm by welding it. It is very windy
          and the farmer must use a petrol generator to generate electricity.

          4.1.1           Name the preferred welding machine that can be used under these
                          conditions and motivate your answer.                                       (3)

          4.1.2           Name THREE points that a beginner welding operator must
                          consider when welding with the welding machine named in
                          QUESTION 4.1.1.                                                            (3)

4.2       The picture below shows a MIG welding-machine component.

          4.2.1           Which part, A or B, feeds the wire through the nozzle of the torch?        (1)

          4.2.2           Name and describe the function of A.                                       (3)

          4.2.3           State TWO measures that can be incorporated in the MIG welding
                          process to prevent porosity.                                               (2)

          4.2.4           State THREE advantages of the MIG welding process.                         (3)

          4.2.5           List THREE steps that must be followed before welding starts with
                          the MIG welding machine.                                                   (3)

4.3       Controlling distortion during the welding process ensures a proper welding
          joint.

          4.3.1           Do you agree with the statement above? Motivate your answer.               (3)

          4.3.2           Name TWO methods of controlling distortion before the welding
                          process starts.                                                            (2)

Copyright reserved                                                                Please turn over

### Page 10

Agricultural Technology                            10                           DBE/May/June 2025
                                            SC/NSC Confidential

4.4       Study the image of the oxyacetylene apparatus below and answer the
          questions that follow.

          4.4.1           Name the gases that are used in cylinder A and in cylinder B.               (2)

          4.4.2           Explain why gas cylinders should be stored in an upright position.          (2)

          4.4.3           Describe the difference between the thread found on the acetylene
                          cylinder and the thread found on the CO2 gas cylinder of the
                          MIG welding machine.                                                        (3)

          4.4.4           Which ONE of the pictures below show the correct PPE that must
                          be used when cutting with the oxyacetylene apparatus? Motivate
                          your answer.

                                        A                                   B

                                                                                                      (3)

          4.4.5           Which valve on the oxyacetylene cutting torch needs to be closed
                          first at the end of the process? Motivate your answer.                      (2)
                                                                                                      [35]

Copyright reserved                                                                 Please turn over

### Page 11

Agricultural Technology                          11                           DBE/May/June 2025
                                          SC/NSC Confidential

QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT

Start this question on a NEW page.

5.1       Mass displacement plays a considerable role in the handling of heavy objects.
          Make use of the labelled image below to answer the questions that follow.
          Write only the letter (A, B or C) to answer QUESTIONS 5.1.1 to 5.1.3.

          5.1.1           Identify the normal centre of gravity point on the tractor when the
                          tractor carries no load.                                                  (1)

          5.1.2           To which point on the tractor does the centre of gravity move when
                          a bale is lifted up high?                                                 (1)

          5.1.3           To what point does the centre of gravity move when a heavy bale
                          is carried close to the ground?                                           (1)

          5.1.4           Some operators carry the bale in a higher position for improved
                          visibility. Do you think it is advisable to do so? Motivate your
                          answer.                                                                   (3)

Copyright reserved                                                               Please turn over

### Page 12

Agricultural Technology                           12                          DBE/May/June 2025
                                           SC/NSC Confidential

5.2       The picture below shows a machine that is used for cutting lucerne.

          5.2.1           Name a safety device that can be installed on this machine to alert
                          bystanders when the operator moves the machine backwards.                 (1)
          5.2.2           List FIVE points to remember when repairs are done on worn
                          cutting blades of this machine.                                           (5)
          5.2.3           What type of hydraulic cylinder must be installed to adjust the
                          height of the cutting table? Motivate your answer.                        (2)
          5.2.4           State TWO advantages of using this machine instead of manual
                          labour to cut lucerne.                                                    (2)
          5.2.5           Name a modern technological device that is used to help the
                          operator to steer this machine in a straight line when cutting
                          lucerne.                                                                  (1)
5.3       Study the picture below and answer the questions that follow.

          5.3.1           Name the device and describe its function.                                (2)
          5.3.2           Where can this device be installed?                                       (1)
          5.3.3           Identify A and explain its function.                                      (3)
5.4       Name ONE safety device that is fitted between the PTO shaft and the
          flywheel of the baling machine.                                                           (1)
5.5       State FOUR actions that must be performed on the baling machine before
          storing it.                                                                               (4)

Copyright reserved                                                               Please turn over

### Page 13

Agricultural Technology                           13                       DBE/May/June 2025
                                           SC/NSC Confidential

5.6       The picture below shows a coupling that is used on a tractor.

          5.6.1           Explain the reason for using this coupling.                             (3)

          5.6.2           State THREE advantages of this coupling.                                (3)

5.7       Study the image below and answer the questions that follow.

          5.7.1           Identify the type of gear shown above.                                  (1)

          5.7.2           Name ONE disadvantage of this type of gear.                             (1)

          5.7.3           Determine the speed ratio if the drive gear has 45 teeth and the
                          driven gear has 15 teeth. (Show ALL calculations.)                      (4)
                                                                                                  [40]

Copyright reserved                                                             Please turn over

### Page 14

Agricultural Technology                          14                             DBE/May/June 2025
                                          SC/NSC Confidential

QUESTION 6: WATER MANAGEMENT
Start this question on a NEW page.
6.1       The pictures below show two different irrigation systems.
                                  A                                         B

          6.1.1           Identify the irrigation system that can best be used on large maize
                          fields and motivate your answer.                                            (3)
          6.1.2           Name TWO methods that a farmer can use to reduce water
                          wastage during irrigation.                                                  (2)
          6.1.3           List THREE disadvantages of a centre-pivot irrigation system.               (3)
          6.1.4           Name TWO preventative measures to limit theft of copper cables
                          used in the centre-pivot irrigation system.                                 (2)

6.2       Choose the function in COLUMN B that matches the pipe fitting in
          COLUMN A. Write only the letter (A–C) next to the question numbers
          (6.2.1 to 6.2.3) in the ANSWER BOOK, e.g. 6.2.4 D.
                                  KOLOM A                          KOLOM B
                     6.2.1                                  A to shut down water
                                                              supply in order to fit a
                                                              new element in a
                                                              geyser

                     6.2.2                                  B to open and close the
                                                              sluice gate of a water
                                                              channel

                     6.2.3                                  C to prevent water from
                                                              flowing back into the
                                                              system

                                                                                         (3 x 1)      (3)
Copyright reserved                                                                 Please turn over

### Page 15

Agricultural Technology                           15                                 DBE/May/June 2025
                                           SC/NSC Confidential

6.3       A water backup system is used to provide water to a farm house when the
          main water supply from the municipality is interrupted. Study the list of items
          below that can be used for the construction of a water backup system and
          answer the questions that follow.

          •    Reservoir
          •    Ball valve
          •    Pipes
          •    Pump
          •    Valves
          •    Taps

          6.3.1           Draw a labelled sketch of a water backup system for a house.
                          Use the following criteria:

                           Items are in the correct order                                 1
                           Labelling/Inscription of inlet and outlet flow of water        2
                           Correct functioning of system                                  1                (4)

          6.3.2           Explain the working principle of the water backup system that you
                          designed.                                                                        (6)

6.4       The flow rate in a water delivery system is 400 litres per minute. It takes
          25 minutes to fill the reservoir. Determine the reservoir's capacity in litres.

          Show ALL calculations.                                                                           (4)

Copyright reserved                                                                      Please turn over

### Page 16

Agricultural Technology                  16                       DBE/May/June 2025
                                  SC/NSC Confidential

6.5       Choose the application in COLUMN B that matches the communication
          device in COLUMN A. Write only the letter (A–C) next to the question
          numbers (6.5.1 to 6.5.3) in the ANSWER BOOK, e.g. 6.5.4 D.

                          COLUMN A                       COLUMN B
                  6.5.1                                     A

                  6.5.2                                       B

                  6.5.3                                       C

                                                                          (3 x 1)     (3)
                                                                                      [30]

                                                           TOTAL SECTION B:           160
                                                              GRAND TOTAL:            200

Copyright reserved

## Related documents

- [Agricultural Technology May-June 2024 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-memorandum-english/57faf85a-afb6-414c-bf66-0e0ede28ff4b) — Agricultural Technology · Memo · 2024 · Eng
- [Agricultural Technology May-June 2023 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-afr/0a79565a-1cf4-4b59-bd47-7c7ae750b4f3) — Agricultural Technology · QP · 2023 · Afr
- [Agricultural Technology May June 2022 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-afr/ccd38003-2303-4ac6-b6d8-0c07141d8a3f) — Agricultural Technology · QP · 2022 · Afr
- [Agricultural Technology May June 2022 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-eng/8efb3673-3f48-4d22-aad9-4af8efb3c7be) — Agricultural Technology · QP · 2022 · Eng
- [Agricultural Technology May June 2021 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-afr/7ffbeef7-3f87-4cff-a5d4-5a92f3861dd1) — Agricultural Technology · QP · 2021 · Afr
- [Agricultural Technology May June 2021 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-eng/3f54a9c3-3e0a-4cf0-a219-4664361b8bd4) — Agricultural Technology · QP · 2021 · Eng

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology Nov 2025 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/69e68c35-b84c-4320-b0d8-58fcb6116f22) — Memo · 2025 · Eng
- [Agricultural Technology Nov 2025 MG Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/84499f01-76f1-43ac-8b53-d844857b9e13) — Memo · 2025 · Afr
- [Agricultural Technology Nov 2024 MG Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-eng/5735a5ce-d167-4c13-bf13-9b5b710aed67) — Memo · 2024 · Eng
- [Agricultural Technology Nov 2024 MG Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-afr/fce88f27-4539-47d4-b4b5-d7ddad4cd2a6) — Memo · 2024 · Afr
- [Agricultural Technology May-June 2023 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-afr/49b9303d-33e4-4f5e-adbe-90dbadf7c5b7) — Memo · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
