# Agricultural Technology Grade 12 NSC November 2023 Memo

> Grade 12 Agricultural Technology memorandum from the NSC November Exam 2023, 16 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/agricultural-technology-nov-2022-mg-final/2963d23d-2657-4839-bed7-da61fa157261
- Updated: 2026-10-29
- Subject: Agricultural Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2023
- Exam period: NSC November Exam
- Curriculum: CAPS
- Pages: 16

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC November 2023 Memo](https://www.hlayiso.com/library/agricultural-technology-nov-2022-mg-final/2963d23d-2657-4839-bed7-da61fa157261)

## About this document

Agricultural Technology · Grade 12 · NSC November Exam · 2023. Memorandum. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                                    GRAAD 12

                                  NATIONAL
                             SENIOR CERTIFICATE

                                    GRADE 12

                         AGRICULTURAL TECHNOLOGY

                                 NOVEMBER 2022

                              MARKING GUIDELINES

MARKS: 200

                     These marking guidelines consist of 16 pages.

Copyright reserved                                                   Please turn over

### Page 2

Downloaded from hlayiso.com
Agricultural Technology                    2                   DBE/November 2022
                              NSC  Marking Guidelines

SECTION A

QUESTION 1

1.1    1.1.1    C
       1.1.2    A
       1.1.3    A
       1.1.4    D
       1.1.5    C
       1.1.6    D
       1.1.7    B
       1.1.8    D
       1.1.9    C
       1.1.10 A/D
                                                                                (20)

1.2    1.2.1    Heat/steam/warmth/magma 
       1.2.2    moveable
       1.2.3    standardisation
       1.2.4    more
       1.2.5    Battery/Accumulator
                                                                                (10)

1.3    1.3.1    G

       1.3.2    D
       1.3.3    F
       1.3.4    B/H 
       1.3.5    A 
                                                                                (10)

                                                         TOTAL SECTION A:       40

Copyright reserved                                                Please turn over

### Page 3

Downloaded from hlayiso.com
Agricultural Technology                         3                            DBE/November 2022
                                   NSC  Marking Guidelines

SECTION B

QUESTION 2: MATERIALS AND STRUCTURES

2.1    The alloy metal that is specifically used to manufacture the products and a
       reason why the metal is used.

       2.1.1         Wine tanks

                     Stainless steel.
                      Resistant to air, water and many chemical acids and alkali.
                      Resistant against corrosion.
                      Can be welded well.                                       (Any 1)      (2)

       2.1.2         Fittings for hot-water copper pipes

                     Brass. 
                      Strength 
                      Machinability
                      Wear resistance
                      Hardness
                      Corrosion resistance                                     (Any 1)       (2)

       2.1.3         Hammers that can be used in explosive atmosphere

                     Bronze
                      Does not generate sparks
                      Low friction                                             (Any 1)       (2)

2.2    ONE example where the following materials will be used on a farm.

       2.2.1      High-tensile steel

                       Tow bar
                       Shafts
                       Gears
                       Crowbar                                                 (Any 1)       (1)

       2.2.2      Cast iron
                       Engine block
                       Differential of the tractor
                       Cast iron pots
                       Tractor weights
                       Brake drum
                       Hubs for farm equipment                                 (Any 1)       (1)

2.3    Description of the annealing process of copper.

       Heat the metal to 500550ºC. Then cool it in the air or sand.                         (2)

Copyright reserved                                                                Please turn over

### Page 4

Downloaded from hlayiso.com
Agricultural Technology                            4                           DBE/November 2022
                                      NSC  Marking Guidelines

2.4    2.4.1         The TWO most important aspects that must be considered when
                     an adhesive is chosen to repair the water trough.

                         Type of the material to be joined.
                         Conditions under which this joint will be used.                       (2)

       2.4.2         Process of preparing the water trough before the adhesive is
                     applied.

                     Clean the surface area around the crack and sand it lightly until
                     there are no more signs of dirt, clean before applying the adhesive.       (2)

       2.4.3         TWO methods used to join fibreglass parts.

                         Pop rivet
                         Bolt and nut
                         Screws                                                                (2)

       2.4.4         TWO methods of colouring a fibreglass trough.

                         Painting
                         Dying                                                                 (2)

2.5    The effect of extreme heat on the following material.

       2.5.1         Bakelite

                            No effect.
                            Will become extremely hot.
                            Will discolour.                                      (Any 1)       (1)

       2.5.2         Perspex

                            It will easily change shape when heated, because Perspex is
                             not heat resistant.
                            It will burn.
                            It will melt                                         (Any 1)       (1)

       2.5.3         Silicon

                            Silicon will melt. 
                            Will deform.                                         (Any 1)       (1)

2.6    Description of the friction ability of Vesconite.

              Low static and dynamic friction
              No friction in tough working environments whether dry or wet, lightly or
               heavily loaded.                                                                  (2)

Copyright reserved                                                                  Please turn over

### Page 5

Downloaded from hlayiso.com
Agricultural Technology                          5                             DBE/November 2022
                                    NSC  Marking Guidelines

2.7    2.7.1         THREE design requirements prescribed for warning signs on
                     electric fences.

                         The signs must be at least 100 mm x 200 mm.
                         The background color of both sides must be yellow.
                         The inscription must be black and must read 'BE AWARE–
                          ELECTRIC FENCE'.
                         The inscription must be clear, inscribed on both sides and have a
                          height of at least 25 mm.
                         At least two languages must be visible on the sign.      (Any 3)     (3)

       2.7.2         TWO situations where an electrical fence can be used on a farm.

                         Protection
                         Temporary fences
                         Dangerous animals, e.g.lions                                         (2)
                         Around the farm perimeter                                (Any 2)

       2.7.3         TWO alternative energy sources that can be used to provide
                     energy for an electrical fence.

                         Wind
                         Solar
                         Hydro electric
                         Generator
                         Battery                                                              (2)

2.8    THREE components needed to create a fire.

          Material that can burn
          Oxygen
          Any heat source (lightning / friction, matches, lighter)                            (3)

2.9    TWO reasons for using resin casting as an insulating material when
       joining THREE phase electrical wires.

          Watertight
          Non-conductor of electricity
          Toughness
          Prevents corrosion/ rust                                               (Any 2)      (2)
                                                                                                [35]

Copyright reserved                                                                 Please turn over

### Page 6

Downloaded from hlayiso.com
Agricultural Technology                         6                             DBE/November 2022
                                   NSC  Marking Guidelines

QUESTION 3: ENERGY

3.1    3.1.1         The energy source that makes use of a generator.

                     Source C                                                                 (1)

       3.1.2         Description of the working principles of energy source B.

                        Cold water passes through glass tubes where it is heated by sun
                         energy.
                        The heated water enters the geyser through a closed copper pipe
                         network that runs through the geyser.
                        The hot water inside the copper pipes heats up the cold water
                         inside the geyser.
                        The cooled water flows downwards back to the solar tubes where
                         it is reheated.                                        (Any 3)       (3)

                     Alternative geyser system.

                        The sun heats up the liquid in the glass tubes
                        That heat up the element.
                        The copper element heats up the water.

       3.1.3         The device that must be connected to energy source A to change
                     the direct current to alternating current.

                     Inverter                                                                 (1)

       3.1.4         Identify energy source C.

                     Concentrated solar/Solar plant/Sun tower                                 (1)

3.2    TWO disadvantages of a wind turbine's blades turning too fast.

          The blades could be damaged.
          The rotor experiences too much strain.
          The structure could collapse.
          Noise pollution.
          Bird strikes                                                           (Any 2)      (2)

3.3    THREE geographical challenges that may arise during a survey for a
       geothermal energy power station.

          Is the rock soft enough to drill through?
          Do the rocks deep down contain sufficient heat?
          Will this heat be sustainable for a significant amount of time?
          Is the environment fit for a power plant?
          Volcanic activities
          Accessibility/Difficult to locate
          Availability of water                                                  (Any 3)      (3)

Copyright reserved                                                                Please turn over

### Page 7

Downloaded from hlayiso.com
Agricultural Technology                      7                        DBE/November 2022
                                NSC  Marking Guidelines

3.4    3.4.1      An alternative racing fuel that can be used to supplement
                  petroleum.

                  Methanol                                                            (1)

       3.4.2      THREE materials used to manufacture the alternative fuel
                  (Methanol).

                     Woody plant fibre
                     Methane gas in landfills
                     Coal
                     Natural gas
                     Fermented waste products such as sewage and manure (Any 3)      (3)

3.5    3.5.1      THREE disadvantages associated with a hydroelectric power
                  plant.

                     Limited plant locations
                     High initial costs
                     Carbon emission
                     Flood risk
                     Susceptible to earthquakes/tremors
                     Limited water resources
                     Affects marine life
                     High costs                                         (Any 3)      (3)

       3.5.2      TWO reasons why hydroelectric power plants are limited in
                  South Africa.

                     Water scarcity
                     Inadequate water flow
                     Non-sustainable water in rivers
                     Inadequate land gradient
                     High costs                                         (Any 2)      (2)
                                                                                       [20]

Copyright reserved                                                        Please turn over

### Page 8

Downloaded from hlayiso.com
Agricultural Technology                           8                        DBE/November 2022
                                     NSC  Marking Guidelines

QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

4.1    4.1.1      Parts A and B.

                     A-    Earth clamp/Clamp
                     B-    Welding/gun/torch                                               (2)

       4.1.2      The apparatus that can be attached for welding aluminium.

                  Push Pull torch                                                          (1)

       4.1.3      TWO gases that can be used with MIG welding.

                         Argon
                         Helium
                         Mixture of Co2 and Argon                            (Any 2)      (2)

       4.1.4      THREE different metals that can successfully be welded with the
                  MIG-welding machine.

                         High alloy steel (stainless alloys) 
                         Aluminium
                         Mild steel                                                       (3)

4.2    4.2.1      The material used for part A.

                         Tungsten
                         Copper mounted hafnium
                         Zirconium                                           (Any 1)      (1)

       4.2.2      Description of the plasma cutting process.

                  The process involves using a tungsten electrode,  and high pressure
                  plasma (which is gas in an ionized state) to generate and carry an
                  electrical arc between a copper nozzle and work piece.
                  The electrical arc performs the cutting, but the pressurized plasma
                  helps to keep the cut cleared by removing the dross (metal impurities
                  generated by the cutting).                                  (Any 3)      (3)

4.3    TWO types of metals that can be cut by using the oxy-acetylene.

           Mild steel
           Cast iron
           Stainless steel
           Any ferrous metals                                                (Any 2)      (2)

Copyright reserved                                                             Please turn over

### Page 9

Downloaded from hlayiso.com
Agricultural Technology                          9                              DBE/November 2022
                                    NSC  Marking Guidelines

4.4    Description of the process of shutting down an oxy-acetylene flame and
       bleeding the system.

           Turn off the acetylene valve on the torch handle. This will extinguish the
            flame. 
           Turn off the oxygen valve on the torch handle.
           Shut/close the main cylinder valves clockwise on the top of both gas
            cylinders. 
           Now open the two valves on the torch handle to 'bleed' the system. 
           Turn both the oxygen and acetylene regulator handles counter-clockwise
            until they are loose. 
           Close both valves on the torch handle. 
           Put the handle and tips away, and return the gas cylinders and their hoses
            to their proper storage area.                                      (Any 5)          (5)

4.5    4.5.1      Description of the process of vertical up arc welding.

                       A special electrode is used for vertical welding with an arc welder,
                        makes the process easier as it 'freezes' more quickly.
                       Amperage can be reduced slightly from the normal down hand
                        setting.
                       Tip of the electrode must be pointed upwards, so that the electrode
                        forms an angle of up to 30° with the horizontal plane.
                       Arc must be kept short and the speed must be just sufficient to
                        prevent the molten metal from the puddle to run down.
                       When welding up, very little lateral movements of the electrode
                        must be made.                                                           (5)

       4.5.2      Draw THREE different types of welding runs used for vertical
                  welding.

                                                                    (Any 3 drawings) 
                                                                                                 (3)
4.6    4.6.1      Calculation of the volume of concrete needed.
                  Formula: Volume= Length x width x height

                  2 500 mm x 1 200 mm x 250 mm = 750 000 000mm³

                                                        OR

                  2,5 m x 1,2 m x 0,25 m = 0,750m³                                            (3)

                     (Allocate full marks if only the final answer is given)

Copyright reserved                                                                  Please turn over

### Page 10

Downloaded from hlayiso.com
Agricultural Technology                    10                      DBE/November 2022
                              NSC  Marking Guidelines

       4.6.2      Design and sketch of a shelter to protect the generator from
                  weather conditions. Show at least TWO measurements.

                              Roof and construction        (2)
                              Poles (Uprights)              (1)
                              Measurements                  (1)
                              Neatness                      (1)

                                                                                    (5)
                                                                                     [35]

Copyright reserved                                                     Please turn over

### Page 11

Downloaded from hlayiso.com
Agricultural Technology                           11                              DBE/November 2022
                                     NSC  Marking Guidelines

QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT

5.1    5.1.1         TWO measures the farmer can apply to ensure that the maize will
                     be harvested on time.

                         Making use of contractors.
                         Working longer hours.
                         Making use of bigger harvesting machines.
                         Harvest until the rain start.                               (Any 2)      (2)

       5.1.2         An alternative method that can be used, other than the combine
                     harvester and justification.

                     Hand harvesting/You can continue to harvest by hand whilst it is
                      raining/ Use a tractor drawn harvester.

                          Justification: Combine harvester will be stuck in the field when soil
                          is wet.
                                                                                       (Any 1)      (2)

5.2    5.2.1         THREE aspects to bear in mind when buying a new baler.

                         Price
                         Local maintenance services
                         Parts locally available
                         Driving power needed for operation
                         Type of baler
                         Ease of operation                                                        (3)
                         Type of binding technique                                  (Any 3)

       5.2.2         THREE points to consider before buying a second-hand baler.

                         Reliability of the agent.
                         Spare parts easily available.
                         Well proven model.
                         Guarantee from agent/seller.
                         General wear and tear.
                                                                                      (Any 3)       (3)

5.3    5.3.1         Less space-consuming bale.

                     A                                                                             (1)

       5.3.2         Justification for answer in QUESTION 5.3.1

                     More bales can be stacked on a truck.
                     No gaps between the bales.                                                    (1)
                     Bales are compact                                                (Any 1)

Copyright reserved                                                                     Please turn over

### Page 12

Downloaded from hlayiso.com
Agricultural Technology                          12                              DBE/November 2022
                                    NSC  Marking Guidelines

       5.3.3         The bale that can be wrapped.

                                                                                                   (1)
                     A or B

       5.3.4         A reason why baling process B can be used up until raining.

                     Water runs down the bale/ bale can be stored outside.                        (1)

       5.3.5         FIVE round-baler safety tips to young upcoming farmers.

                         Familiarise yourself with the operator's manual.
                         Adequate training must take place.
                         Ensure all safety screens are in place.
                         Be watchful when backing up as baler is bulky and reduces vision
                          to the rear.
                         Avoid sharp turning.
                         Assure no one is near the rear gate when it is being raised and
                          lowered.
                         Keep everyone clear of the rear of the baler during unloading.
                         Large round bales can roll after discharge when on hilly terrain.
                         Before servicing, cleaning, or adjusting a round baler, disengage
                          the tractor PTO.
                         Block the gate before working under it. Use the safety lock system
                          for the baler.
                         Keep the PTO properly shielded.
                         Never allow passengers to ride on the baler during operation or
                          transport.
                         Be extremely cautious when operating a baler on uneven or hilly
                          terrain.
                         Raise the pickup to clear humps and obstacles when passing over
                          uneven terrain.                                             (Any 5)     (5)

5.4    5.4.1         The type of belt best fitted on the pulley system and ONE reason
                     for identifying it.

                     V-belts
                            AND
                      Does not easily slip off.
                      Draw tighter around pulleys.
                      No lubrication needed.
                      Lasts longer.                                                 (Any 1)      (2)

       5.4.2         Changing the direction in which pulley A rotates.

                     By twisting the belts.
                     Switch the motor to the other side.
                     Change the polarity of the motor.                               (Any 1)      (1)

Copyright reserved                                                                    Please turn over

### Page 13

Downloaded from hlayiso.com
Agricultural Technology                          13                             DBE/November 2022
                                    NSC  Marking Guidelines

5.5    5.5.1         The different types of gears, A and B.

                     A- Straight cut gear/ Spur gear
                     B- Helical gear                                                             (2)

       5.5.2      Calculation and ratio of gear connection.

                  Driver gear (128 teeth)
                  Driven gear (16 teeth)

                  Driver gear
                  --------------
                  Driven gear

                  = 128÷16 
                  = 8 : 1                                                                       (3)

       5.5.3      ONE advantage and ONE disadvantage of each gearing system.

                          GEAR      ADVANTAGE            DISADVANTAGE
                                    Easy to              Noisy.
                           Spur     manufacture.        Cannot use in synchronised
                           gear     Cheaper to           gearbox.
                            (A)     manufacture.        Difficult to mash.
                                               (Any 1)   Subject to wear.       (Any 1)
                                    Lasts longer.       Subjected to side thrust.
                          Helical   Easy to mash.       More expensive to
                           gear     Less wear.          manufacture.           (Any 1)
                            (B)     More contact point
                                    of teeth. (Any 1)                                            (4)

       5.5.4      The gear system to improve speed.

                  A                                                                             (2)

5.6    5.6.1      Cylinder types.

                        A- Double (action) cylinder
                        B- Single (action) cylinder                                              (2)

       5.6.2      The cylinder best fitted on a front-end loader.

                        A- Double action cylinder                                                (1)

       5.6.3      Explanation to support answer given in QUIESTION 5.6.2.

                  It enables the operator to set the control lever in a downand upward
                  thrust position.                                                               (2)

Copyright reserved                                                                   Please turn over

### Page 14

Downloaded from hlayiso.com
Agricultural Technology                         14                             DBE/November 2022
                                   NSC  Marking Guidelines

       5.6.4      TWO reasons to justify the use of transmission oil in a tractor
                  hydraulic system.

                       Not compressible
                       Good lubrication qualities
                       Not volatile
                       Relatively cheap                                            (Any 2)      (2)
                                                                                                  [40]

QUESTION 6: WATER MANAGEMENT

6.1    Irrigation components and their function.

       6.1.1      Irrigation timer/Irrigation controller/Smart controller                        (1)

       6.1.2      An irrigation timer controls the flow of water by turning on and off.
                  Used for scheduling irrigation.                                (Any 1 )        (1)

       6.1.3      Electronic valve/ Solenoid valve/ Irrigation valve                             (1)

       6.1.4         An irrigation valve regulates the one-directional flow of water in an        (1)
                     irrigation system.

       6.1.5      Sprinkler/sprayer                                                              (1)

       6.1.6      An irrigation sprinkler drops water onto the land, mimicking the effects
                  of rain.                                                                       (1)

6.2    6.2.1      TWO reasons for determining the flow rate of the pump.

                       For correct calibrating of the sprayers.
                       Effective scheduling of irrigation.
                       To prevent the over/under utilisation of the water source.   (Any 2)      (2)

       6.2.2      Calculation of the flow rate.

                  Flow rate = Content ÷ Time
                            = 10 000÷8
                            = 1 250 Litres/minute                                                (3)

6.3    Type of device suitable to send the location.

           GPS
           Cell phone
           Tablet
           Tablet                                                                   (Any 1)      (1)

Copyright reserved                                                                   Please turn over

### Page 15

Downloaded from hlayiso.com
Agricultural Technology                       15                         DBE/November 2022
                                 NSC  Marking Guidelines

6.4    6.4.1      The irrigation system, best suitable for a land against steep
                  slopes with motivation.
                     B

                                                 AND

                     Prevents run off water.
                     Pivots mainly used on level surfaces.
                     Does not cause soil erosion.                               (Any 2)      (3)

       6.4.2      Reasons for preferring irrigation system A.

                     Not necessary to remove system.
                     Can work with implements on land.
                     Animals cannot damage system.
                     Less time consuming.
                     Less labour intensive.
                     Remote control/management.
                     Variable rate irrigation.                             ..   (Any 2)      (2)

6.5    6.5.1      The design error of the septic tank.

                  The outlet is higher than the inlet.
                  No partition wall.
                  There will be a backflow of waste water.                       (Any 2)      (2)

       6.5.2      The importance of installing a manhole in a septic tank.

                     General maintenance
                     Removing of solids
                     Inspection
                     Adding bacteria
                     Unclogging of in/outlet                                    (Any 4)      (4)

       6.5.3      Suitable drainage system to be connected to the septic tanks
                  outlet.

                  French drain
                  Pebble/stone drain
                  Drainage field                                                 (Any 1)      (1)

6.6    The main cause of blockages in a town's sewage system.

           The disposal of non-degradable materials.
           The lack of maintenance.
           Missing manhole lids.
           Root obstructions.
           Too many people using the system.                                    (Any 1)      (1)

Copyright reserved                                                                Please turn over

### Page 16

Downloaded from hlayiso.com
Agricultural Technology                         16                                DBE/November 2022
                                   NSC  Marking Guidelines

6.7    6.7.1         The type of filter to connect with a water softener.

                     A                                                                          (1)

       6.7.2         The filter that is installed to a micro irrigation system.

                     F                                                                          (1)

       6.7.3         ONE example where the filter shown in C will be used.

                     Micro irrigation
                     Swimming pool                                                   (Any 1)    (1)

       6.7.4         Correct statement.

                     Filtration always takes place from the outside to the inside of the
                     filter.                                                                     (2)
                                                                                                 [30]
                                                                      TOTAL SECTION B:           160
                                                                         GRAND TOTAL:            200

Copyright reserved

## Related documents

- [Agricultural Technology Nov 2022 MG Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2022-mg-afr/5ad9323a-6205-448b-a33a-62918ebd56aa) — Agricultural Technology · Memo · 2023 · Afr
- [Agricultural Technology Nov 2023 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2023-afr/c3b8b589-9e64-4570-b82b-604d612b5c5d) — Agricultural Technology · QP · 2023 · Afr
- [Agricultural Technology Nov 2023 Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2023-eng/86f6afe6-d48c-4deb-850f-b5ecd800d688) — Agricultural Technology · QP · 2023 · Eng
- [Agricultural Technology May-June 2023 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-afr/49b9303d-33e4-4f5e-adbe-90dbadf7c5b7) — Agricultural Technology · Memo · 2023 · Afr
- [Agricultural Technology May-June 2023 MG Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-eng/db10383d-7cc4-41f6-9140-68d351a16776) — Agricultural Technology · Memo · 2023 · Eng
- [Agricultural Technology Nov 2021 MG Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2021-mg-eng/e95c9d3e-42d8-4b28-93e1-74c3dbc81895) — Agricultural Technology · Memo · 2021 · Eng

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology May-June 2025 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2025-eng/277bcb3f-14d3-4d58-9b23-d192269c80e2) — QP · 2025 · Eng
- [Agricultural Technology Nov 2025 Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/d47614f1-1c99-4acc-87f4-eefd7c63d61e) — QP · 2025 · Eng
- [Agricultural Technology Nov 2025 Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/f45f941f-dd15-410f-97ae-f0ce8a673078) — QP · 2025 · Afr
- [Agricultural Technology Nov 2024 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-afr/f4723cfb-5760-424c-a00a-2c0e3b5e5dbb) — QP · 2024 · Afr
- [Agricultural Technology Nov 2024 Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-eng/f63c1a66-fac4-4a77-acdc-6e16d5d7293f) — QP · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
