# Agricultural Technology Grade 12 NSC November 2023 QP (Eng)

> Grade 12 Agricultural Technology question paper from the NSC November Exam 2023 (English), 18 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/agricultural-technology-nov-2023-eng/86f6afe6-d48c-4deb-850f-b5ecd800d688
- Updated: 2026-09-27
- Subject: Agricultural Technology
- Grade: Grade 12
- Document type: Question paper
- Year: 2023
- Exam period: NSC November Exam
- Curriculum: CAPS
- Pages: 18

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC November 2023 QP (Eng)](https://www.hlayiso.com/library/agricultural-technology-nov-2023-eng/86f6afe6-d48c-4deb-850f-b5ecd800d688)

## About this document

Agricultural Technology · Grade 12 · NSC November Exam · 2023. Question paper, 18 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                                 NATIONAL
                            SENIOR CERTIFICATE

                                  GRADE 12

                       AGRICULTURAL TECHNOLOGY

                                NOVEMBER 2023

MARKS: 200

TIME: 3 hours

                     This question paper consists of 18 pages.

Copyright reserved                                               Please turn over

### Page 2

Downloaded from hlayiso.com
Agricultural Technology                           2                      DBE/November 2023
                                                 NSC

INSTRUCTIONS AND INFORMATION

1.        GENERAL INSTRUCTIONS AND INFORMATION

          1.1        This question paper consists of TWO sections, namely SECTION A
                     and SECTION B.

          1.2        BOTH sections are COMPULSORY.

          1.3        Answer ALL the questions in the ANSWER BOOK.

          1.4        Number the answers correctly according to the numbering system
                     used in this question paper.

          1.5        You may use a non-programmable calculator.

          1.6        Show ALL calculations.

          1.7        Write neatly and legibly.

2.        SECTION A: SHORT QUESTIONS

          2.1        This section consists of THREE questions.

          2.2        Follow the instructions when answering the questions.

3.        SECTION B: STRUCTURED LONG QUESTIONS

          3.1        This section consists of FIVE questions.

          3.2        Start EACH question on a NEW page.

Copyright reserved                                                           Please turn over

### Page 3

Downloaded from hlayiso.com
Agricultural Technology                             3                          DBE/November 2023
                                                   NSC

SECTION A

QUESTION 1

1.1       Various options are provided as possible answers to the following questions.
          Choose the answer and write only the letter (A–D) next to the question
          numbers (1.1.1 to 1.1.10) in the ANSWER BOOK, e.g. 1.1.11 D.

          1.1.1           The … of the hammer mill facilitates the process of feeding hay
                          into the machine.

                          A    cyclone
                          B    hopper
                          C    fan
                          D    hammer

          1.1.2           The device that facilitates the power take-off shaft (PTO shaft) to
                          operate at an angle:

                          A    Universal joint
                          B    Differential
                          C    Stabilising chain
                          D    Top link

          1.1.3           A method used to change a tractor's mass displacement positively:

                          A    Increase the speed of the tractor
                          B    Decrease the wheel base of the tractor
                          C    Increase the towing load
                          D    Lower the tow bar

          1.1.4           Where can the tractor's sensitivity element be installed?

                          A    In front of the power take-off shaft (PTO shaft)
                          B    At the base where the lifting arms are connected to the tractor
                          C    In the clutch housing
                          D    At the end of the steering mechanism

          1.1.5           The material used for manufacturing the main structure of a centre-
                          pivot irrigation system:

                          A    Vesconite
                          B    Copper
                          C    PVC
                          D    Galvanised steel

Copyright reserved                                                                    Please turn over

### Page 4

Downloaded from hlayiso.com
Agricultural Technology                             4                          DBE/November 2023
                                                   NSC

          1.1.6           A device used to measure the moisture content of the soil:

                          A    Evaporation pan
                          B    Irrigation controller
                          C    Neutron probe
                          D    Thermometer

          1.1.7           Regulates the one-directional flow of water in an irrigation system:

                          A    Non-return valve
                          B    Irrigation timer
                          C    Water filter
                          D    Sprinkler

          1.1.8           A … is not a component of the oxyacetylene cutting torch.

                          A    cutting lever
                          B    blow pipe
                          C    needle valve
                          D    water trap

          1.1.9           A device that prevents a flame from shooting back into the gas
                          cylinder while working with the oxyacetylene cutting apparatus:

                          A    Flashback arrestor
                          B    Blow pipe
                          C    Needle valve
                          D    Spark preventer

         1.1.10           Personal protection equipment safeguard the welding operator
                          against … when welding.

                          A    X-rays
                          B    ultraviolet rays
                          C    gamma rays
                          D    neon rays                                               (10 x 2)       (20)

Copyright reserved                                                                 Please turn over

### Page 5

Downloaded from hlayiso.com
Agricultural Technology                         5                             DBE/November 2023
                                               NSC

1.2       Change the underlined word(s) in the following to make the statements
          TRUE. Write only the appropriate word(s) next to the question numbers
          (1.2.1 to 1.2.5) in the ANSWER BOOK, e.g. 1.2.6 Tractor.

          1.2.1      The final drive is built into the rear axle of a tractor to equalise the
                     rotation between the rear wheels.

          1.2.2      The straight gear runs at an angle across the outer circumference of
                     the gear.

          1.2.3      Bacteria, moulds, dust and viruses are examples of chemical
                     hazards.

          1.2.4      The discharged effluent from the septic tank is distributed through
                     coiled pipes into a distribution field.

          1.2.5      The gas flame melts metal when using the plasma-cutting machine.
                                                                                (5 x 2)             (10)

1.3       Choose a word/term from COLUMN B that matches a description in
          COLUMN A. Write only the letter (A–H) next to the question numbers
          (1.3.1 to 1.3.5) in the ANSWER BOOK, e.g. 1.3.6 J.

                            COLUMN A                                 COLUMN B
          1.3.1      The mechanism in the tractor's       A     alternating current
                     drive system that enables the
                     engine drive to disengage when       B     grease
                     gears are changed
                                                          C     water/moisture
          1.3.2      The device that causes speed
                     reduction and increased torque in D        clutch
                     a tractor
                                                       E        direct current
          1.3.3      A fitting used on a drive system
                     for applying lubricants           F        final drive

          1.3.4      A type of current produced by a      G     grease nipple
                     photovoltaic solar panel
                                                          H     flywheel
          1.3.5      Can cause internal arcing that
                     damages the torch of a plasma-
                     cutting machine
                                                                                      (5 x 2)       (10)

                                                                         TOTAL SECTION A:           40

Copyright reserved                                                               Please turn over

### Page 6

Downloaded from hlayiso.com
Agricultural Technology                        6                          DBE/November 2023
                                              NSC

SECTION B

QUESTION 2: MATERIALS AND STRUCTURES

Start this question on a NEW page.

2.1       The pictures below show TWO types of water troughs. Water trough A is
          made from fibreglass and B from concrete.

                              A                              B

          2.1.1      Name a synthetic material, except fibreglass, that can be used to
                     manufacture a water trough.                                                 (1)

          2.1.2      Give TWO reasons why water trough A would be preferred to water
                     trough B.                                                                   (2)

          2.1.3      Name the device that will be installed into the trough to allow water
                     to flow into the trough when the water level drops.                         (1)

2.2       The picture below shows an example of a typical adhesive.

          2.2.1      What is meant by the load capacity of an adhesive?                          (2)

          2.2.2      Explain how the adhesion properties of an adhesive can be
                     improved to strengthen the bond between two materials.                      (2)

Copyright reserved                                                            Please turn over

### Page 7

Downloaded from hlayiso.com
Agricultural Technology                      7                         DBE/November 2023
                                            NSC

2.3       The table below shows different synthetic materials. Complete the table by
          writing only the answer next to the question numbers (2.3.1 to 2.3.3) in the
          ANSWER BOOK.

                                                     PVC               TEFLON
              Distortion temperature               220 °C               2.3.1
              Effect of heat                        2.3.2              No effect
              Applications                        Water pipes           2.3.3                 (3)

2.4       Name TWO effects of nickel on stainless steel.                                      (2)

2.5       The picture below shows a brass bush.

          2.5.1      Name TWO metals that are used to manufacture brass.                      (2)

          2.5.2      State TWO permanent joining methods that incorporate heat that is
                     used to join brass.                                                      (2)

          2.5.3      Name TWO properties of a brass alloy bush that make it more
                     suitable to use in a certain application than a pure copper bush.        (2)

2.6       Give THREE reasons why a Vesconite bush is preferred to a bearing.                  (3)

Copyright reserved                                                         Please turn over

### Page 8

Downloaded from hlayiso.com
Agricultural Technology                        8                          DBE/November 2023
                                              NSC

2.7       The picture below shows an electrical fence.

          2.7.1      Name the depth to which the earth electrode must penetrate the soil
                     when a high output energiser is used.                                        (1)

          2.7.2      Name a cost-effective method that can be used to protect steel
                     posts against corrosion.                                                     (1)

          2.7.3      State THREE causes of short circuits on an electrical fence.                 (3)

          2.7.4      Explain why copper is the preferred material to manufacture the
                     earth spikes used in an electric fence.                                      (3)

2.8       A farmer needs to install an electrical fence with six strands of wire with a
          perimeter of 300 metres and with one gate.

          Use the following information and calculate the total cost of the fence:

           Four corner posts and two gate posts                 R180,00 per post
           One hundred droppers                                R13,00 per dropper
           Fence wire                                           R1,50 per metre
           Isolators                                            R5,00 per isolator                (5)
                                                                                                  [35]

Copyright reserved                                                             Please turn over

### Page 9

Downloaded from hlayiso.com
Agricultural Technology                        9                           DBE/November 2023
                                              NSC

QUESTION 3: ENERGY

Start this question on a NEW page.

3.1       Complete the table below. Write only the answer next to the question numbers
          (3.1.1 to 3.1.3) in the ANSWER BOOK.

              TYPE OF ALTERNATIVE FUEL                     SOURCE OF FUEL
                       Ethanol                                    3.1.1
                        3.1.2                            Woody plant fibre, coal or
                                                              natural gas
                          Methane gas                             3.1.3                              (3)

3.2       The illustration below shows the internal sections of a wind turbine.

                                                                 B     A
          3.2.1      Name part A.                                                                    (1)

          3.2.2      Describe the function of the gearbox labelled as part B.                        (2)

          3.2.3      Name the part that is installed on a wind turbine to measure wind
                     speed.                                                                          (1)

          3.2.4      Explain the effect that a change in the pitch of the propeller blades
                     has on the wind turbine.                                                        (2)

Copyright reserved                                                                Please turn over

### Page 10

Downloaded from hlayiso.com
Agricultural Technology                        10                         DBE/November 2023
                                              NSC

3.3       Study the picture of a solar system below and answer the questions that
          follow.

          3.3.1      Identify FOUR aspects that have a negative influence on the efficient
                     generation of electricity by the solar panel system.                        (4)

          3.3.2      Explain to a farmer why a solar electric system is preferred to
                     electricity provided by the national electricity grid.                      (3)

          3.3.3      State THREE protective measures that can be installed to protect
                     the solar system against theft and vandalism.                               (3)

3.4       State ONE precautionary measure that must be implemented to prevent
          over-cooling of a geothermal energy plant's heat source.                               (1)
                                                                                                 [20]

Copyright reserved                                                            Please turn over

### Page 11

Downloaded from hlayiso.com
Agricultural Technology                        11                        DBE/November 2023
                                              NSC

QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

Start this question on a NEW page.

4.1       Safety measures are some of the most important aspects when performing
          tasks in the workshop, as shown below.

          4.1.1      List FOUR safety equipment items that need to be present before
                     performing any task in the workshop.                                       (4)

          4.1.2      Discuss FIVE ways in which a farmer can limit risks and improve the
                     safety of workers when working with gas equipment in a workshop.           (5)

          4.1.3      Explain why it is not advisable to perform tasks when a person is
                     alone in a workshop.                                                       (2)

4.2       Pictures A and B below show two different types of welding machines.

                                A                                   B

          4.2.1      Identify the type of welding machine at A and B.                           (2)

          4.2.2      Indicate which ONE of the welding machines above would require
                     more technical skills to work with. Motivate your answer.                  (2)

          4.2.3      Explain why it is not advisable to weld with welding machine A in an
                     open area.                                                                 (2)
Copyright reserved                                                           Please turn over

### Page 12

Downloaded from hlayiso.com
Agricultural Technology                        12                         DBE/November 2023
                                              NSC

4.3       Study the picture below and answer the questions that follow.

                                                                 C

          4.3.1       The gas pressure regulator shown above must be connected to the
                      CO2 cylinder with a threaded connector (C).

                      Indicate whether the threaded connector should be clockwise or
                      anticlockwise.                                                             (1)

          4.3.2       Identify the component (A or B) that indicates the rate at which the
                      gas flows.                                                                 (1)

          4.3.3       Name a defect that will occur when the gas working pressure is
                      too low.                                                                   (1)

4.4       The table below shows common MIG welding defects. Complete the table by
          writing only the answer next to the question numbers (4.4.1 to 4.4.4) in the
          ANSWER BOOK.

                                             PROBABLE
                     DEFECT                                             SOLUTION
                                               CAUSE
                      4.4.1                Current too low                 4.4.2
                                          Root gap too small
                     Spatter            Inadequate inductance              4.4.3
                                         Rusty or primed plate
             Too much metal in                   4.4.4               Reduce wire speed
              the welding pool                                                                   (4)

Copyright reserved                                                            Please turn over

### Page 13

Downloaded from hlayiso.com
Agricultural Technology                       13                        DBE/November 2023
                                             NSC

4.5       Label parts A, B, C, D and E in the MIG welding diagram below.

                                                                                               (5)

4.6       The picture below shows an arc weld T-joint.

          4.6.1      Name the correct angle of the welding electrode in relation to the
                     work piece when welding a T-joint. Give a reason for your answer.         (2)

          4.6.2      Name TWO methods that can be used to prevent shrinking and
                     distortion when welding the two pieces of metal.                          (2)

4.7       Explain EACH of the following types of metal deterioration:

          4.7.1      Friction                                                                  (1)

          4.7.2      Metal fatigue                                                             (1)
                                                                                               [35]

Copyright reserved                                                          Please turn over

### Page 14

Downloaded from hlayiso.com
Agricultural Technology                        14                          DBE/November 2023
                                              NSC

QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT

Start this question on a NEW page.

5.1       The picture below shows an edge cutter.

          5.1.1      Name THREE items of personal protective equipment that must be
                     worn when working with an edge cutter.                                       (3)

          5.1.2      List FOUR safety tips when working with an edge cutter.                      (4)

5.2       The image below shows a hydraulic cylinder fitted on a farm implement.

          5.2.1      Identify the type of hydraulic cylinder shown in the image above.            (1)

          5.2.2      State FOUR advantages of the transmission oil that is used in the
                     hydraulic cylinder.                                                          (4)

Copyright reserved                                                             Please turn over

### Page 15

Downloaded from hlayiso.com
Agricultural Technology                        15                          DBE/November 2023
                                              NSC

5.3       The illustration below shows a belt and pulley system found on a combine
          harvester.

          5.3.1      Explain, by referring to the illustration above, why a V-belt would be
                     preferred to a flat belt.                                                    (3)

          5.3.2      Calculate the speed of pulley B if the speed of pulley A is 100 r/min.
                     The diameter of pulley A is 300 mm and the diameter of pulley B is
                     120 mm.

                     Use the following formula:

                     Na x Da = Ng x Dg

                     Na = speed of driving pulley
                     Da = diameter of driving pulley
                     Ng = speed of driven pulley
                     Dg = diameter of driven pulley                                               (4)

          5.3.3      Name pulley C and explain its function as applied in this system.            (3)

5.4       The images below show different problems associated with the hitching of an
          implement.

          Complete the table by writing the answers next to the question numbers
          (5.4.1 to 5.4.3) in the ANSWER BOOK.

                                               PROBLEM                  SOLUTION
                                            The rear end of the           5.4.1
                                           implement does not
                                            penetrate the soil.

                                          The implement works              5.4.2
                                          at an incorrect cross
                                           angle in relation to
                                               the tractor.

                                              The front of the             5.4.3
                                            tractor is lifting up.

                                                                                                  (3)
Copyright reserved                                                             Please turn over

### Page 16

Downloaded from hlayiso.com
Agricultural Technology                        16                         DBE/November 2023
                                              NSC

5.5       The illustration below shows a round baler that can be used to bale round
          bales for animal feed. Study the illustration and answer the questions that
          follow.

          5.5.1      Identify the type of round baler in the illustration above and give a
                     reason for your answer.                                                     (2)

          5.5.2      Give TWO reasons for installing a slip clutch on the power take-off
                     (PTO) shaft of the round baler.                                             (2)

          5.5.3      Explain FOUR tasks that must be completed when preparing a
                     baler for the baling season.                                                (4)

          5.5.4      Suggest what should be done to prevent bales from rolling away
                     when baling against a slope.                                                (2)

5.6       The image below shows a combine harvester used for harvesting wheat.

          5.6.1      Describe the working of the combine harvester from the moment
                     that the wheat is cut and fed into the machine until the harvested
                     wheat falls into the truck.                                                 (3)

          5.6.2      Explain the disadvantages of NOT setting a combine harvester
                     correctly before harvesting the wheat.                                      (2)
                                                                                                 [40]
Copyright reserved                                                            Please turn over

### Page 17

Downloaded from hlayiso.com
Agricultural Technology                         17                           DBE/November 2023
                                               NSC

QUESTION 6: WATER MANAGEMENT

Start this question on a NEW page.

6.1       The photograph below shows an irrigation sprinkler connected to a variable-
          rate applicator.

          6.1.1      State the advantages of this type of irrigation sprinkler.                      (3)

          6.1.2      Name TWO types of material that can block or obstruct this type of
                     irrigation sprinkler.                                                           (2)

          6.1.3      Name a device that can be installed in the irrigation system to
                     prevent blockages.                                                              (1)

          6.1.4      Name a specific device that is placed in a field to determine when
                     the centre-pivot irrigation system must switch on to apply a certain
                     amount of water to the crop according to the needs.                             (1)

6.2       The centre-pivot irrigation system below tends to get stuck in very wet clay
          soil. Suggest TWO ways in which to prevent this from happening.

                                                                                                     (2)

6.3       Give the term used to describe the correct frequency and duration of irrigation
          in a field.                                                                                (1)

Copyright reserved                                                                Please turn over

### Page 18

Downloaded from hlayiso.com
Agricultural Technology                         18                          DBE/November 2023
                                               NSC

6.4       Explain what evapotranspiration is and name a device that is used to
          measure it.                                                                           (2)

6.5       The picture below shows a septic tank that is used to treat waste water from
          the farmhouse.

          6.5.1      What is the purpose of the two round structures on top of the septic
                     tank?                                                                      (1)

          6.5.2      Name THREE types of matter that can be found in the first
                     compartment of a sewerage treatment system.                                (3)

          6.5.3      Give TWO useful tips that must be considered when maintenance is
                     done on the septic tank.                                                   (2)

          6.5.4      Explain the functions of useful bacteria found in a septic tank.           (3)

6.6       Discuss the function of the GPS device that is installed on a tractor.                (2)

6.7       Explain the role of irrigation software in crop production.                           (5)

6.8       Give the name of EACH of the following water purification systems:

          6.8.1      Remove impurities from water by a process of boiling and
                     condensing                                                                 (1)

          6.8.2      Water is sent through two different liquids separated by a permeable
                     film, which only allows water to pass through on molecular level           (1)
                                                                                                [30]

                                                                        TOTAL SECTION B:        160
                                                                           GRAND TOTAL:         200

Copyright reserved

## Related documents

- [Agricultural Technology Nov 2023 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2023-afr/c3b8b589-9e64-4570-b82b-604d612b5c5d) — Agricultural Technology · QP · 2023 · Afr
- [Agricultural Technology Nov 2022 MG Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2022-mg-afr/5ad9323a-6205-448b-a33a-62918ebd56aa) — Agricultural Technology · Memo · 2023 · Afr
- [Agricultural Technology Nov 2022 MG Final](https://www.hlayiso.com/library/agricultural-technology-nov-2022-mg-final/2963d23d-2657-4839-bed7-da61fa157261) — Agricultural Technology · Memo · 2023
- [Agricultural Technology May-June 2023 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-eng/6e72892b-deb8-4820-8758-b91c5592448a) — Agricultural Technology · QP · 2023 · Eng
- [Agricultural Technology May-June 2023 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-afr/0a79565a-1cf4-4b59-bd47-7c7ae750b4f3) — Agricultural Technology · QP · 2023 · Afr
- [Agricultural Technology Nov 2022 Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2022-eng/c3d21a49-1d99-4db4-89e1-881053003584) — Agricultural Technology · QP · 2022 · Eng

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology May-June 2025 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2025-mg-afr/5f3f1dd7-8ba2-41ba-97bd-f8a4f9dfbdd5) — Memo · 2025 · Afr
- [Agricultural Technology Nov 2025 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/69e68c35-b84c-4320-b0d8-58fcb6116f22) — Memo · 2025 · Eng
- [Agricultural Technology Nov 2025 MG Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/84499f01-76f1-43ac-8b53-d844857b9e13) — Memo · 2025 · Afr
- [Agricultural Technology Nov 2024 MG Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-eng/5735a5ce-d167-4c13-bf13-9b5b710aed67) — Memo · 2024 · Eng
- [Agricultural Technology Nov 2024 MG Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-afr/fce88f27-4539-47d4-b4b5-d7ddad4cd2a6) — Memo · 2024 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
