# Civil Technology Grade 12 Eastern Cape Mock 2021 Memo (Eng)

> Grade 12 Civil Technology memorandum from the Eastern Cape Mock Exam 2021 (English), 15 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2021-english-civil-services/80eb9860-b118-41e2-98fd-5bea1b29a026
- Updated: 2026-09-27
- Subject: Civil Technology
- Grade: Grade 12
- Language: English
- Document type: Memorandum
- Year: 2021
- Exam period: Eastern Cape Mock Exam
- Curriculum: CAPS
- Pages: 15

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Civil Technology](https://www.hlayiso.com/library/grade-12/civil-technology) › [Civil Technology Grade 12 Eastern Cape Mock 2021 Memo (Eng)](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2021-english-civil-services/80eb9860-b118-41e2-98fd-5bea1b29a026)

## About this document

Civil Technology · Grade 12 · Eastern Cape Mock Exam · 2021 · English. Memorandum, 15 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                              NATIONAL
                         SENIOR CERTIFICATE

                                  GRADE 12

                          SEPTEMBER 2021

         CIVIL TECHNOLOGY: CIVIL SERVICES
                 MARKING GUIDELINE

MARK
       200
S:

       This marking guideline consists of 15 pages, including 3 answer sheets.

### Page 2

Downloaded from hlayiso.com
2                          CIVIL TECHNOLOGY: CIVIL SERVICES                     (EC/SEPTEMBER 2021)

INSTRUCTIONS FOR THE MARKERS

1.    Markers should:

        Familiarise themselves with the question and answer before evaluating the
         responses of candidates.
        Always interpret the responses of the candidates within the context of the
         question.
        Consider any relevant and acceptable answer during pre-marking but should
         strictly adhere to the answers after finalisation of the marking guideline.
        There are two approaches to answering questions, these are (1) to describe
         and (2) to explain.
        If a candidate is required to explain e.g., a process in 4 steps, only the first 4
         responses should be considered.
        If, however a candidate is required to e.g., explain or describe how to transfer
         heights from one point to another using a transparent pipe level we need to
         consider that candidates may write a long description not necessarily well
         organised as an intellectual response may do. In this case the marker needs
         to evaluate the complete statement to judge if the candidate explained the
         required outcome satisfactorily and allocate marks on merit. The marker
         should apply his/her professional judgement with these types of questions.
        Mark what the candidate wrote and do not award marks for answers that the
         marker thinks the candidate meant with what was written.
        Indicate the tick or cross right at the position where the mark needs to be
         awarded or where the candidate made the error.
        Accept the letter corresponding with the correct answer as well as the answer
         written in full in multiple-choice questions.
        Accept incorrect spelling in one-word answers unless the spelling changes
         the meaning of the answer.

2.    For calculations:

        A mark is only awarded if the correct unit is written next to the answer.
        If TWO marks are awarded ONE mark is awarded for the answer and ONE
         mark for the correct unit.
        Where the candidate made a principle error e.g. added instead of multiplying,
         no marks will be awarded for the steps. If the answer is correct according to
         what the candidate did, the mark for the answer can be awarded for the
         application of skills.
        Where an incorrect answer could be carried over to the next step, the first
         answer will be deemed incorrect. However, should the incorrect answer be
         carried over correctly, the marker has to recalculate the values, using the
         incorrect answer from the first calculation. If correctly used, the candidate
         should receive the full marks for subsequent calculations.
        Markers should consider when and where a candidate has rounded off in a
         calculation, as well as the subsequent effect it has on the final answer
         obtained. The calculation should therefore be awarded marks on merit.
        Alternative methods of calculations must be considered, provided that the
         correct answer is obtained.

Copyright reserved                                                                 Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)                CIVIL TECHNOLOGY: CIVIL SERVICES                             3

3.    When marking drawings:

        The member for which the mark should be awarded should be drawn correctly
         in the correct position to receive a mark.
        A member incorrectly drawn but wrongfully repeated in another position will
         be awarded the mark for the repeated incorrect member provided that the
         marking guideline provide for TWO or more marks for that member (positive
         marking).
        Marks can only be awarded for a label if the label is correctly indicating the
         correct member.
        Scale drawings should always be marked using an appropriate mask.

      When a candidate drew the wrong drawing e.g.:

        A horizontal section instead of a vertical section, no marks will be allocated to
         the drawing as the candidate did not respond to the expected outcome.
        An orthographic view instead of sectional view, no marks will be allocated to
         the drawing as the candidate did not respond to the expected outcome.
        An orthographic view instead of an isometric view, no marks will be allocated
         to the drawing as the candidate did not respond to the expected outcome.
        If the incorrect drawing was drawn, the candidate can be awarded for only
         what was asked but mark/s for the correctness of the drawing will not be
         awarded e.g., if a King Post roof truss was asked in the question, and
         candidate drew SA-Howe Truss.

Copyright reserved                                                                Please turn over

### Page 4

Downloaded from hlayiso.com
4                             CIVIL TECHNOLOGY: CIVIL SERVICES                 (EC/SEPTEMBER 2021)

    QUESTION 1: SAFETY AND MATERIALS (GENERIC)

    1.1   Answer the following question regarding scaffolding.

          1.1.1      A – Guardrail (1)
                     B – Planks / Working platform (1)
                     C – Kickboard / Toe-board (1)
                     D – Brace (1)                                                             (4)

          1.1.2      228 mm (1) x 38 mm (1)                                                    (2)

          1.1.3      Provides stability to the scaffolding.                                    (1)

          1.1.4      Minimum = 900 mm (1) and maximum = 1 000 mm (1)                           (2)

    1.2   1.2.1      Placing of building rubble:
                      May not obstruct access or exits
                      Safe place
                      Regularly removed.                                   (Any 1 x 1)        (1)

          1.2.2      When materials are transported to higher surfaces:
                      Workers must maintain a safe distance
                      Overhead protection                                  (Any 1 x 1)        (1)

    1.3   Any THREE:
           Non-skid devices on the bottom
           Hooks at the upper ends
           Lashed, secure or fastened
           Held by someone                                                 (Any 3 x 1)        (3)

    1.4   Rungs                                                                                (1)

    1.5   The coating of a metal by electrolysis (1) with a thin layer of another
          metal. (1)                                                                           (2)

    1.6   To improve the metal’s corrosion resistance.                                         (1)

    1.7   Any TWO:
           Adds strength to the metal
           Galvanised metals are thicker
           Galvanised nails and screws prevents staining                   (Any 2 x 1)       (2)
                                                                                             [20]

Copyright reserved                                                                  Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)                CIVIL TECHNOLOGY: CIVIL SERVICES                             5

QUESTION 2: GRAPHICS, JOINING AND EQUIPMENT (GENERIC)

2.1    FIGURE 2.1 on ANSWER SHEET A shows a floorplan of a storeroom on
       scale 1 : 50. Draw the south elevation on scale 1 : 50 on ANSWER SHEET
       A from the given ground level, by using the following information:

           The floor level height is 200 mm above the ground level
           Wall height is 2 600 mm from the floor level to the ceiling
           Window 1 is 1 200 x 900 mm
           Door 1 is 1 100 x 2 100 mm
           Doorknob
           Roof construction pitch is 30°
           Show construction lines to determine the roof height
           Gable end at the west elevation
           Hippen end at the east elevation

Use the marks table on ANSWER SHEET A as reference.                                     (29)

2.2    A – Nut with built-in washer like a flange (1)
       B – Wing nut (1)
       C – Domed top nut (1)                                                              (3)

2.3    Any TWO:
        Resist pull-out failure
        Excellent carrying capacity
        Tolerance to a variance in the hole size                         (Any 2 x 1)     (2)

2.4    Must be set-up that the telescope (1) is placed on a comfortable
       sightline (1) to prevent a person from bending or stretching over the
       telescope and tripod (1).                                                          (3)

2.5    Any THREE:
        Wiring
        Wood
        Metal studs
        Copper pipes
        Plumbing work                                                    (Any 3 x 1)    (3)
                                                                                        [40]

                                                                 TOTAL SECTION A:         60

Copyright reserved                                                             Please turn over

### Page 6

Downloaded from hlayiso.com
6                           CIVIL TECHNOLOGY: CIVIL SERVICES              (EC/SEPTEMBER 2021)

QUESTION 3: SAFETY, MATERIAL AND CONSTRUCTION (SPECIFIC)

3.1 FIGURE 3.1 shows workers who must work in a manhole. Answer the following
    questions regarding the safety measures which must be applied.

      3.1.1    Similar answer:
                Prevents material or persons falling in.
                Identifies a danger zone.                                 (Any 1 x 1)    (1)

      3.1.2    Similar answer:
                Pipe for extractor fan or blower.
                Provides manhole workers with fresh air.                 (Any 1 x 1)     (1)

      3.1.3    When (1) dangerous fumes / gases are (2) present in the manhole /
               confined spaces.                                                           (2)

      3.1.4    Respirator                                                                 (1)

3.2 Similar answer:
        Safety net
        Catch platform
        Rails / Barriers
        Hard hat                                                         (Any 1 x 1)     (1)

3.3 Any TWO:
       Electrical tools
       Battery tools
       Fuel tools                                                         (Any 2 x 1)    (2)

3.4 3.4.1      True                                                                       (1)

      3.4.2    False                                                                      (1)

      3.4.3    True                                                                       (1)

      3.4.4    True                                                                       (1)

3.5 Scale or corrosion products (1) are removed (2) by subjecting it as an
    electrode (3) to an electrical current (4) in an electrolytic bath.                   (4)

3.6 FIGURE 3.6 on ANSWER SHEET B shows layer 1 of a T-junction in a one-brick
    wall in stretcher bond. Draw the alternate layer of the T-junction on scale 1 : 10
    on ANSWER SHEET B.                                                                    (7)

3.7 English bond                                                                          (1)

Copyright reserved                                                           Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)             CIVIL TECHNOLOGY: CIVIL SERVICES                          7

3.8 Give access to drain system / Cleaning of drain system                               (1)

3.9 Make a neat section sketch in good ratio to illustrate a manhole construction
    with benching. Show the following parts and indicate it with labels:
        Concrete base
        Brick walls
        Pipe channel
        Benching
        Cover frame and cover

             COVER                                             FRAME

                                                     PIPE CHANNEL
                                                          BENCHING
       BRICK WALL

        CONCRETE
        BASE
                                                                                         (5)
                                                                                        [30]

Copyright reserved                                                          Please turn over

### Page 8

Downloaded from hlayiso.com
8                            CIVIL TECHNOLOGY: CIVIL SERVICES               (EC/SEPTEMBER 2021)

QUESTION 4: COLD-WATER SUPPLY, HOT-WATER SUPPLY AND
            EQUIPMENT (SPECIFIC)

4.1   Any THREE properties of water
       Colourless
       Free from suspended matter
       Free from harmful bacteria
       Pleasant to taste
       Moderately hard                                                    (Any 3 x 1)     (3)

4.2   Prevents water from leaking from the spindle.                                        (1)

4.3   It reduces splashing / water noise.                                                  (1)

4.4   Answer the following questions regarding the valve in FIGURE 4.4.

      4.4.1    Non-return valve                                                            (1)

      4.4.2    B                                                                           (1)

      4.4.3    Open                                                                        (1)

      4.4.4    Where water flows only in one direction.                                    (1)

4.5   Answer the following questions regarding FIGURE 4.4.
      4.5.1    S-trap                                                                      (1)

      4.5.2    (1) Keeps water back to (2) prevent odours passing to the inside.           (2)

      4.5.3    Inspection eye                                                              (1)

      4.5.4    Cleaning of trap                                                            (1)

4.6   Wastewater – water contaminated by human waste / pollutants.
      Soil water – water from the sink / basin / bath / shower.                            (2)

4.7   Describe TWO advantages of electronic taps.
         It only allows water to flow through when the sensor is triggered / saves
          water.
         You do not need to touch the tap.                                     (2 x 1)    (2)

4.8   (1) Polluted water harms (2) mechanisms of valves and tap washers.                   (2)

4.9   4.9.1    Expansion-control vessel                                                    (1)

      4.9.2    Mixer                                                                       (1)

      4.9.3    Non-return valve                                                            (1)

      4.9.4    Float valve                                                                 (1)

      4.9.5    Pressure-control valve                                                      (1)

Copyright reserved                                                             Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)               CIVIL TECHNOLOGY: CIVIL SERVICES                            9

4.10 Make neat sketches of the following symbols for hot water systems.

      4.10.1 Pressure-reducing valve                                                        (2)

      4.10.2 Vacuum-relieve valve                                                           (2)

4.11 (1) It occurs when a pipe bursts / faulty plumbing (2) traps air in a high point.
     (3) The air blocks the (4) flow of water.                                              (4)

4.12 4.12.1 True                                                                            (1)

      4.12.2 True                                                                           (1)

      4.12.3 True                                                                           (1)

4.13 Loose clothing can get caught in the moving parts.                                     (1)

4.14 Name TWO tools which are used for cleaning blockages in drains.
       Drain-cleaning rods
       Drain-cleaning or jetting machine                                        (2 x 1)    (2)

4.15 Water pressure testing pump                                                            (1)
                                                                                           [40]

Copyright reserved                                                              Please turn over

### Page 10

Downloaded from hlayiso.com
10                          CIVIL TECHNOLOGY: CIVIL SERVICES                  (EC/SEPTEMBER 2021)

QUESTION 5: DRAINAGE AND QUANTITIES (SPECIFIC)

5.1   Describe the following requirements for an efficient drainage system.

      5.1.1    Smooth finishing                                                              (1)

      5.1.2    100 mm                                                                        (1)

      5.1.3          Where 2 or more pipes meet
                     At the main pipeline junction
                     Every 25 metres                                                        (3)

5.2   (1) Where ground movement occur and (2) leakages must be prevented.                    (2)

5.3   Name TWO properties of earthenware drainpipes.
       Brittle
       Durable                                                                  (2 x 1)     (2)

5.4   Make a neat section sketch of a coupling socket joint for drainpipes.

                                                                                            (3)
5.5   Name TWO positions in a drainage system where gullies must be installed.
        Wastewater connection at drain from the kitchen.
        Wastewater connection at drain from the bathroom.                 (2 x 1)           (2)

5.6   Choose the correct description regarding a septic tank.

      5.6.1         Sewerage
                    Water closet                                                            (2)

      5.6.2    Sink to the bottom of the chamber                                             (1)

      5.6.3         Bacteria
                    Liquid                                                                  (2)

      5.6.4    Sludge                                                                        (1)

5.7   Give the colour coding for the following drainage fittings:

      5.7.1    Brown                                                                         (1)

      5.7.2    Blue                                                                          (1)

      5.7.3    Black                                                                         (1)

Copyright reserved                                                               Please turn over

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)                 CIVIL TECHNOLOGY: CIVIL SERVICES                 11

5.8   Identify the following abbreviations for drainage fittings:

      5.8.1    IR – Inspection room                                                 (1)

      5.8.2    ST – Septic tank                                                     (1)

      5.8.3    CE – Cleaning eye                                                    (1)

5.9   Test if drains are airtight / watertight.                                     (1)

5.10 The side of a cubic water supply tank is 1 800 mm.
     Determine the following of the tank.
     (Show all calculations and formulas.)

      5.10.1 Volume = S3
                    = 1,8 x 1,8 x 1,8
                    = 5,83 m3                                                       (3)

      5.10.2 Volume water = 5,83 m3 x 1 000 ℓ/ m3
                          = 5 830 ℓ                                                 (2)

5.11 FIGURE 5.11 shows the pictorial view of a part of the layout for a drainage
     system. Answer the following questions regarding the system.

      5.11.1 A – Stop end
             B – 90° Single T-junction
             C – Waste pipe
             D – Waste bent                                                         (4)

      5.11.2 Ø 110 mm                                                               (1)

      5.11.3 Ø 50 mm                                                                (1)

      5.11.4 PVC                                                                    (1)

      5.11.5 620 mm (10 mm tolerance)                                               (1)
                                                                                   [40]

Copyright reserved                                                      Please turn over

### Page 12

Downloaded from hlayiso.com
12                         CIVIL TECHNOLOGY: CIVIL SERVICES                (EC/SEPTEMBER 2021)

QUESTION 6: GRAPHIC COMMUNICATION, ROOF WORK, STORMWATER AND
            JOINING (SPECIFIC)

6.1     FIGURE 6.1 on ANSWER SHEET C shows the top and front view of a
        cylindrical pipe.
        Draw the development of the cylindrical pipe on ANSWER SHEET C. Show all
        construction lines.                                                      (12)

6.2     Indicate if the following statements are TRUE or FALSE. Write only ‘true’ or
        ‘false’ next to the question number in the ANSWER BOOK.

        6.2.1 True                                                                         (1)

        6.2.2 True                                                                         (1)

        6.2.3 False                                                                        (1)

        6.2.4 True                                                                         (1)

6.3     Join gutters                                                                       (1)

6.4     Bottom of a downpipe                                                               (1)

6.5     Discuss the following regulations which are applicable to stormwater disposal.

        6.5.1 (1) It must be drained away from the building (2) to prevent damage to
              property.                                                                    (2)

        6.5.2 (1) At least 5 m away from any building (2) to prevent any accumulation
              of dampness.                                                                 (2)

6.6     Name THREE negative consequences of storm water constructions which do
        not comply to the requirements.
        Any THREE:
         Discomfort of occupants
         Loss of life
         Damage to property
         Pollution of the environment
         Negative environmental impact                              (Any 3 x 1)           (3)

6.7     (1) Assists in cleaning the material / prevents oxidation (2) and promotes the
        flow of solder.                                                                    (2)

6.8     Resin                                                                              (1)

6.9     1 – Pop rivet
        2 – Lap joint with cover strip                                                     (2)
                                                                                          [30]

                                                                               TOTAL: 200

Copyright reserved                                                            Please turn over

### Page 13

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)                 CIVIL TECHNOLOGY: CIVIL SERVICES                        13

                             CIVIL TECHNOLOGY          NAME:
 ANSWER SHEET           A         GENERIC

2.1 FIGURE 2.1 shows the floor plan of a storeroom on scale 1 : 50.
    Draw the south elevation on scale 1 : 50 on ANSWER SHEET A from the
    given ground level.                                                                  (29)

                            4 200

                            3 640

                                                        2 740   3 300

       SCALE 1:50

                                                                        Floor level    2
                                                                        Wall           3
                                         Pitch                          Window         3
                                                                        Windowsill     1
                                                                        Door           4
                                                      Height
                                                                        Stairs         1
                                                                        Ramp           1
                                                                        Fascia board   2
                                                                        Gutter         1
                                                                        Down pipe      1
                                                                        Gable ent      4
                                                                        Hipped ent     3
                                                                        Roof height    3
                                                                NGL           TOTAL:   29

Copyright reserved                                                             Please turn over

### Page 14

Downloaded from hlayiso.com
14                         CIVIL TECHNOLOGY: CIVIL SERVICES                 (EC/SEPTEMBER 2021)

                             CIVIL TECHNOLOGY          NAME:
ANSWER SHEET           B       CIVIL SERVICES

3.6   FIGURE 3.6 on ANSWER SHEET B shows layer 1 of a T-junction in a one-
      brick wall in stretcher bond. Draw the alternate layer of the T-junction on scale
      1 : 10 on ANSWER SHEET B.                                                            (7)

                                                                 SCALE:

                                                     Brickwork                     6
                                                     Application of scale          1
                                                                       TOTAL:      7

Copyright reserved                                                             Please turn over

### Page 15

Downloaded from hlayiso.com
    (EC/SEPTEMBER 2021)                     CIVIL TECHNOLOGY: CIVIL SERVICES                        15

                                    CIVIL TECHNOLOGY               NAME:
    ANSWER SHEET            C         CIVIL SERVICES

    6.1    FIGURE 6.1 on ANSWER SHEET C shows the top and front view of a
           cylindrical pipe.
           Draw the development of the cylindrical pipe on ANSWER SHEET C. Show
           all construction lines.                                                               (12)

                                C                                                                         D

                                0   1          2    3     4    5     6     7   8   9    10     11    12
                                A                                                                         B
      FRONT VIEW                        1
                                               2
                                                    3
                                                         4
                                                               5
              3                                                      6
      4              2                                                     7
                                                                               8
5                          1                                                       9
                                                                                       10
                                                                                              11          E
                            0                                                                        12
6
                           12

7                          11
                                            Dividing lines 0–12 on top view                6
      8              10
              9                             Base line A–B                                  1
                                            Dividing lines AE                              2
          TOP VIEW                          Vertical construction lines 0–12               2
                                            Seam lines A–C and B–D                         1
                                                                                   TOTAL: 12

    Copyright reserved                                                                 Please turn over

## Related documents

- [CIV TECH GR12 QP SEPT2021 English Construction](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2021-english-construction/551ab3e9-47c5-4ab0-a0cf-bc66dda5a956) — Civil Technology · QP · 2021 · Eng
- [CIV TECH GR12 MEMO SEPT2022 Woodworking English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2022-woodworking-english/62d9cbb1-1077-4edb-86c4-7a21fd6749a9) — Civil Technology · Memo · 2022 · Eng
- [CIV TECH GR12 MEMO SEPT2022 Civil Services English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2022-civil-services-english/896ddb1f-2144-4bfc-a35a-3a71507d7637) — Civil Technology · Memo · 2022 · Eng
- [CIVIL TECH GR12 MEMO GR12 SEPT2017 English](https://www.hlayiso.com/library/civil-tech-gr12-memo-gr12-sept2017-english/fcb77566-a1ac-4dff-af72-678e70ccfbc4) — Civil Technology · Memo · 2017 · Eng
- [CIV TECH GR12 QP SEPT 2023 Construction English](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept-2023-construction-english/4163a632-f091-41bf-8a36-993d566fb2cc) — Civil Technology · QP · 2023 · Eng
- [CIV TECH GR12 QP SEPT2022 Woodworking English](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2022-woodworking-english/c3b4a7c0-761a-45aa-a578-9b98afc86830) — Civil Technology · QP · 2022 · Eng

## More from Grade 12 Civil Technology

- [CVLT Woodworking Eng watermark](https://www.hlayiso.com/library/cvlt-woodworking-eng-watermark/8e178c6e-fa7b-40f4-8a2c-936e0bee3b38) — QP · 2025 · Eng
- [Civil Technology Nov 2025 (Woodworking) Afr](https://www.hlayiso.com/library/grade-12-civil-technology-2025-nsc-november-exam-question-paper/05a95faf-5891-4d88-9e5e-7d13c1d21648) — QP · 2025 · Afr
- [CIV TECH GR12 QP SEPT2024 Construction English](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2024-construction-english/12643629-87af-4230-a48a-002beb7f6cd7) — QP · 2024 · Eng
- [Civil Technology Nov 2024 (Woodworking) Afr](https://www.hlayiso.com/library/civil-technology-nov-2024-woodworking-afr/eefaae29-fe93-4b75-8223-87bf4f3fc14c) — QP · 2024 · Afr
- [Civil Technology Nov 2024 (Civil Services) Afr](https://www.hlayiso.com/library/civil-technology-nov-2024-civil-services-afr/307147a5-3280-4a11-a82e-cf3e33388eb0) — QP · 2024 · Afr
- [Civil Technology Nov 2023 (Construction) Eng](https://www.hlayiso.com/library/civil-technology-nov-2023-construction-eng/e6743728-8140-42ae-838d-282654a975a5) — QP · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
