# Civil Technology Grade 12 NSC June 2022 Question Paper (Eng)

> Grade 12 Civil Technology question paper from the NSC June Exam 2022 (English), 27 pages. Read online or get the free PDF download, memo linked when available.

- Page: https://www.hlayiso.com/library/civil-technology-may-june-2022-woodworking-eng/6bfe9199-25cf-4c12-8dc6-817a01e3c184
- Updated: 2026-09-27
- Subject: Civil Technology
- Grade: Grade 12
- Document type: Question paper
- Year: 2022
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 27

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Civil Technology](https://www.hlayiso.com/library/grade-12/civil-technology) › [Civil Technology Grade 12 NSC June 2022 Question Paper (Eng)](https://www.hlayiso.com/library/civil-technology-may-june-2022-woodworking-eng/6bfe9199-25cf-4c12-8dc6-817a01e3c184)

## About this document

Civil Technology · Grade 12 · NSC June Exam · 2022. Question paper, 27 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

basic education

Department:
Basic Education
REPUBLIC OF SOUTH AFRICA

SENIOR CERTIFICATE EXAMINATIONS/
NATIONAL SENIOR CERTIFICATE EXAMINATIONS

CIVIL TECHNOLOGY: WOODWORKING
2022

MARKS: 200

TIME: 3 hours

This question paper consists of 16 pages and 10 answer sheets.

Please turn over

Copyright reserved

### Page 2

Downloaded from hlayiso.com

Civil Technology: Woodworking 2 DBE/2022
SC/NSC

REQUIREMENTS:

1. Drawing instruments

2. A non-programmable calculator

3. ANSWER BOOK

INSTRUCTIONS AND INFORMATION
1. This question paper consists of SIX questions.
Answer ALL the questions.

Read all the questions carefully.

k YS N

Answer each question as a whole. Do NOT separate subsections of
questions.

a

Number the answers correctly according to the numbering system used in this
question paper.

Start the answer to EACH question on a NEW page.
Do NOT write in the margins of the ANSWER BOOK.

You may use sketches to illustrate your answers.

o @ N ®

Write ALL calculations and answers in the ANSWER BOOK or on the
attached ANSWER SHEETS.

10. Use the mark allocation as a guide to the length of your answers.

11. Make drawings and sketches in pencil, fully dimensioned and neatly finished
off with descriptive titles and notes to conform to the SANS/SABS Code of
Practice for Building Drawings.

12. For the purpose of this question paper, the size of a brick should be taken as
220 mm x 110 mm x 75 mm.

413. Use your own discretion where dimensions and/or details have been omitted.

14. Answer QUESTIONS 2, 3.4, 3.5, 4.5, 4.6, 5.3, 5.4, 6.5, 6.6 and 6.7 on the
attached ANSWER SHEETS using drawing instruments where necessary.

15. Write your CENTRE NUMBER and EXAMINATION NUMBER on every
ANSWER SHEET and hand them in with your ANSWER BOOK, whether you
have used them or not.

16. Drawings in the question paper are NOT to scale due to electronic transfer.
17. Google Images were used as the source of all photographs and pictures.

18. Write neatly and legibly.

Copyright reserved Please turn over

### Page 3

Civil Technology: Woodworking

QUESTION 1:

Downloaded from hlayiso.com

3
SC/NSC

DBE/2022

OHSA, MATERIALS, TOOLS, EQUIPMENT AND JOINING

(GENERIC)

Start this question on a NEW page.

1.1 Give ONE word/term for each of the following descriptions. Write only the
word/term next to the question numbers (1.1.1 to 1.1.5) in the ANSWER
BOOK, e.g. 1.1.6 preservative.

1.1.1 Can be melted again because no chemical process is involved

1.1.2 The coating of a metal by using the process of electrolysis

1.1.3 The process of keeping freshly cast concrete moist/damp for a
specific period

1.1.4 Available in a matt and gloss finish

1.1.5 A process used to coat steel with a layer of zinc

1.2 FIGURE 1.2 below shows a ladder that is used on a construction site.
FIGURE 1.2

1.2.1 Why should non-skid material be fitted to the bottom end of the
stiles of a ladder?

1.2.2 Explain why it is better to use a wooden ladder when working near
electrical cables.

1.2.3 Explain why you would prefer to use an aluminium ladder instead
of a wooden ladder.

1.2.4 Name TWO methods that can be used to treat wooden ladders.

Copyright reserved

Please turn over

(1)
(1)

(1)
(1)
(1)

(1)

(1)

(1)
(2)

### Page 4

Downloaded from hlayiso.com

Civil Technology: Woodworking 4 DBE/2022
SC/NSC

1.3 Describe TWO safety regulations that a scaffold platform must adhere to. (2)
1.4 Name TWO places on a building site where safety nets should be erected to

ensure the safety of the workers. (2)
1.5 FIGURE 1.5 below shows a joining fixture.

FIGURE 1.5
1.5.1 Identify the joining fixture. (1)

1.5.2 Explain the first THREE steps you would follow to attach a bracket
to a brick wall by using the fixture above after the position of the
hole has been marked. (3)

1.6 Complete in your ANSWER BOOK the information in the table below by
indicating ONE use and ONE way to care for the tool.

NAME OF TOOL USE WAY TO CARE
Dumpy level To determine ... Protect the dumpy level by ...

(2)
[20]

QUESTION 2: GRAPHICS AS MEANS OF COMMUNICATION (GENERIC)

FIGURE A and FIGURE B on the next page show drawings that appear on a building
pian. Analyse the drawings and complete the table on ANSWER SHEET 2.

Copyright reserved Please turn over

### Page 5

Downloaded from hlayiso.com

Civil Technology: Woodworking

5
SC/NSC

DBE/2022

26 000

PLOT 53

| “SWIMMING
POOL

4000

30.000

EXISTING
DWELLING

NEW
| DWELLING

Cit

4.3 000

PLOT 71 )

PLOT 69

WIDE

1.500

Lo

MAPLE STREET

—

=

FIGURE A

PLOT 55

1

—|

ROOMA

“Hh

__|| 220

4000 |

SP ven

DINING ROOM

110 |
4.

4000

110 |

5 000

BEDROOM 1

BEDROOM 2

+

10 |

——=
1
4000

|
220) 110
j

10
6000

|
+
FIGURE B

6 000

110 §

NOTES:

Contractors must verify all dimensions
and levels on site before commencing
work. Architects must be notified of
any discrepancies immediately.

Wall thickness: External = 220 mm
Internal = 110 mm

Architect's signature ......... ce

Client’s signature 0000.0... ieee

Precast concrete fencing must be
erected on the boundary of the new
dwelling.

REVISION: | DATE:
1 18/04/2022

DESCRIPTION:
WINDOW IN ROOM A

PRINTED BY:
TEXON PRINTERS

DATE OF PRINT:
24/04/2022

DRAWING TITLE:
SITE AND FLOOR PLAN PLOT 71

PROJECT:
PROPOSED DWELLING ON PLOT 71,
JEFFREYS BAY

PROJECT NO.:
GR 339-670

DRAWING NO.:
443P8

DATE:
12/02/2022

DRAWN:
JP COX

CHECKED:
CLEE

SITE PLAN SCALE: 1: 500

FLOOR PLAN SCALE 1: 100

REFERENCE CODE
QP 4- 2022

[40]

Copyright reserved

Please turn over

### Page 6

Downloaded from hlayiso.com

Civil Technology: Woodworking 6 DBE/2022
SC/NSC

QUESTION 3: CUPBOARDS, CASEMENTS, WALL-PANELLING AND QUANTITIES
(SPECIFIC)

Start this question on a NEW page.

3.1 Give ONE word/term for each of the following descriptions by choosing a

word/term from the list below. Write only the word/term next to the question
numbers (3.1.1 to 3.1.5) in the ANSWER BOOK, e.g. 3.1.6 window.

top rail; transom; window pane; mullion; drip groove; casement:
fanlight; sill; glazing bars; frame stile; frame head

3.1.1 The bottom horizontal member of the casement frame, fixed to the
wall by means of horns on both ends (1)
3.1.2 The middle vertical member between the casement stiles (1)
3.1.3 The outer vertical member of the frame (1)
3.1.4 The horizontal member that separates the casement and the
fanlight (1)
3.1.5 The horizontal members between the rails of a casement (1)

3.2 Draw, in your ANSWER BOOK, a neat freehand sketch of the sectional view
of only the top rail of a casement. (3)

Copyright reserved Please turn over

### Page 7

Downloaded from hlayiso.com

Civil Technology: Woodworking 7

SC/NSC

DBE/2022

3.3 FIGURE 3.3 below shows the front elevation of a built-in cupboard without

doors.
A
D D
B
c
FIGURE 3.3
3.3.1 Identify parts A to C.
3.3.2 Describe the purpose of a hanging rail in a cupboard.
3.3.3 Draw, in your ANSWER BOOK, a neat freehand sketch of

section D-D.

3.4 Use ANSWER SHEET 3.4 and draw, in good proportion, a vertical sectional
view of the middle part of a wall panel made of tongue and groove boards.

Copyright reserved

Please turn over

(3)
(1)

(4)

(4)

### Page 8

Downloaded from hlayiso.com

Civil Technology: Woodworking 8 DBE/2022
SC/NSC
3.5 FIGURE 3.5 below shows a sectional view of a building with a lean-to roof.

Study the figure and answer the questions that follow. Give your answers
in metres (m).

[enn n nnn e ne eee eee ene e eee 4
| fs t
1 1
i '
i Nt
a lig g
i x} ©
1 t
' 1
8 560
>)
300 ||! _ 3
9 000
FIGURE 3.5

Use the following specification:

e The construction of the lean-to roof consists of EIGHT rafters and FOUR
purlins.

Use the dimension sheet on ANSWER SHEET 3.5, ignore the slope of the
toof and calculate the following:

3.5.1 The total length of the rafters needed if the length of the rafter

is 5 600 mm (3)
3.5.2 The total length of the purlins needed if the length of the purlin
is 9600 mm (3)
3.5.3 The total area of underlay needed if the underlay ends on the
outside walls (4)
[30]

Copyright reserved Please turn over

### Page 9

Downloaded from hlayiso.com

Civil Technology: Woodworking

DBE/2022

SC/NSC

QUESTION 4: ROOFS, CEILINGS, TOOLS, EQUIPMENT AND MATERIALS

(SPECIFIC)

Start this question on a NEW page.

4.1 Choose a description from COLUMN B that matches an item in COLUMN A.
Write only the letter (A-L) next to the question numbers (4.1.1 to 4.1.8) in the

ANSWER BOOK, e.g. 4.1.9 M.

COLUMN A

COLUMN B

4.1.1 Jig saw

4.1.2 Orbital'sander
4.1.3 Morticing machine
4.1.4 Radial arm saw
4.1.5 Spindle moulder
4.1.6 Lathe

4.1.7 Router

4.1.8 Bandsaw

sanding can be done in any direction

ensure that the cutting tool rests on the
tool rest

apply wax to the sole so that the
machine glides easily across the work
piece

always lock the tool rest 200 mm from
the stock

always check the tension of the blade
before cutting commences

tension applied to the sanding belt
should not exceed its strength

avoid shaping pieces of timber shorter
than 250 mm

do not force material onto the chisel or
drill bit

do not force material onto the sanding
belt

to cut out circles, first drill a hole to
insert the blade

avoid making adjustments while the
blade is rotating

lock the table at one height for all work
to be done

Copyright reserved

(8x1)

Please turn over

(8)

### Page 10

Downloaded from hlayiso.com

Civil Technology: Woodworking 10 DBE/2022
SC/NSC

4.2 Name and describe TWO methods that are used to grade timber. (4)

4.3 State ONE preservative that can be used on wood. (1)

4.4 FIGURE 4.4 below shows a roof construction.

A
B
D
Cc
FIGURE 4.4
Identify parts A to E. (5)

4.5 Use ANSWER SHEET 4.5 and draw, in good proportion, a detailed vertical
sectional view of the foot of the roof, showing the details of the open eaves,
roof covering and rainwater system of a roof. Label any TWO parts with
dimensions. (14)

4.6 Use ANSWER SHEET 4.6 and draw, in good proportion, the vertical sectional

view of the construction of a conventional trapdoor. (8)
[40]

Copyright reserved Please turn over

### Page 11

Downloaded from hlayiso.com

Civil Technology: Woodworking 11 DBE/2022
SC/NSC

QUESTION 5: CENTERING, FORMWORK, SHORING AND GRAPHICS AS
MEANS OF COMMUNICATION (SPECIFIC)

Start this question on a NEW page.

5.1 FIGURE 5.1 below shows a part of an incomplete shoring.
(eer eas
A
< wi a
| (ee A eA Se Re aad
N
B
c
[EE ae yn.
FIGURE 5.1
5.1.4 Identify the type of shoring shown in FIGURE 5.1. (1)
6.1.2 Name parts A to C. (3)

Copyright reserved Please turn over

### Page 12

Downloaded from hlayiso.com

Civil Technology: Woodworking 12 DBE/2022
SC/NSC

5.2 FIGURE 5.2 below shows the timber laggings used in centering.

TS |S Ses5

A B
FIGURE 5.2
5.2.1 Identify the types of laggings in A and B respectively. (2)
5.2.2 Identify TWO mistakes in the centerings. (2)
5.2.3 Describe how you will rectify the mistakes. (2)
5.2.4 Name ONE other material that can be used for C. (1)

5.3 Use ANSWER SHEET 5.3 and draw, in good proportion, the front view of a
lean-to roof truss. The bearing and parapet walls should be shown. Label any
TWO members and add dimensions. (8)

5.4 ANSWER SHEET 5.4 shows the incomplete sectional view of the formwork of
a concrete beam with an attached floor on both sides.

Use ANSWER SHEET 5.4 and draw the parts below the bearer/head tree to
show the completed formwork. Label any TWO of the parts that you have
added. (11)

[30]

Copyright reserved Please turn over

### Page 13

Downloaded from hlayiso.com

Civil Technology: Woodworking 13 DBE/2022
SC/NSC
QUESTION 6: SUSPENDED FLOORS, STAIRCASES, IRONMONGERY, DOORS

AND JOINING (SPECIFIC)

Start this question on a NEW page.

6.1 Various options are given as possible answers to the following questions.
Choose the answer and write only the letter (A-D) next to the question

numbers (6.1.1 to 6.1.5) in the ANSWER BOOK, e.g. 6.1.6 C.

6.1.1

6.1.5

Copyright reserved

A wall plate can be secured to a wall by means of ...

0NOUrF F DVOWPY

steel nails.
a bolt.
screws.
wire.

.. iS used to secure a roof truss to the wall plate.

galvanised hoop-iron strap
gang nail

truss hanger

All the above-mentioned

Roof tiles are ... to the batten.

A
B
Cc
D

bolted

tied with wire

strapped with hoop-iron straps
nailed

Adjacent members of a roof truss are joined together by means
of...

A
B
Cc
D

storm clips.

hoop iron (metal strips).

gang nails.

None of the above-mentioned

You will use ... to fix brandering to a tie beam.

A
B
Cc
D

straps
bolts
gang nails
nails

Please turn over

(1)

(1)

(1)

(1)

(1)

### Page 14

Downloaded from hlayiso.com

Civil Technology: Woodworking 14 DBE/2022
SC/NSC
6.2 The various uses or placement of different locks and latches are described
below.

Name the lock or latch that:

6.2.1 Is mounted onto the internal surface of the door, while the keepers
are screwed onto the door jamb (1)
6.2.2 Is fitted into a recess on the internal surface of the cupboard door (1)
6.2.3 Can be used on its own, but is commonly used with another locking
device for extra security (1)
6.2.4 Is ideal for front and back doors, internal doors and panel doors (1)

6.3 FIGURE 6.3 below shows two methods of joining floor joists to a wall.

WA Y
A B
FIGURE 6.3

6.3.1 Describe the joining methods used to join the floor joist to the wail

in A and B respectively. (2)
6.3.2 Explain why you would prefer method A. (2)

6.4 The figures below are different drawings of staircases with landings.
A B

6.4.1 Identify the different types of landings in A and B. (2)
6.4.2 Explain TWO reasons for installing a landing. (2)

Copyright reserved Please turn over

### Page 15

Downloaded from hlayiso.com

Civil Technology: Woodworking 15 DBE/2022
SC/NSC

6.5 Use ANSWER SHEET 6.5 and draw, in good proportion, a neat isometric
view of part B for an open double/twin mortice and tenon joint.

ae

FIGURE 6.5 6)

6.6 ANSWER SHEET 6.6 shows an incomplete sectional view of a suspended
timber floor with tongue and groove floor boards.

Draw the complete drawing to indicate the following:

The external wall to accommodate a suspended timber floor

Plaster on both sides of the wall

Air brick

Ant guard

Damp-proof course (DPC)

Foundation (8)

Copyright reserved Please turn over

### Page 16

Downloaded from hlayiso.com

Civil Technology: Woodworking 16 DBE/2022
SC/NSC
6.7 FIGURE 6.7 below shows the front elevation of an entrance door with a glass

panel on top and a raised and fielded panel at the bottom.

a FRAME HEAD
+“
TOP RAIL

Zo GLASS PANEL

DOOR STILE

i LOW MIDDLE/LOCK RAIL

RAISED AND FIELDED PANEL

<—— FRAME STILE

BOTTOM RAIL

FIGURE 6.7
Use ANSWER SHEET 6.7 and draw, in good proportion, a vertical sectional
view on A~A. (9)
[40]

TOTAL: 200

Copyright reserved

### Page 17

Downloaded from hlayiso.com

Civil Technology: Woodworking DBE/2022
SC/NSC
| CENTRE NUMBER: [| L 1 J
[EXAMINATIONNUMBER: | | | | | | | | | | | | | 4
ANSWER SHEET 2
NO. QUESTIONS ANSWERS MARKS
Identify the scale that was used for the
1. site plan and the floor pian 2
respectively.
2 Who is responsible for checking the 1
. building plan?
What type of fencing does the
3. architect recommend for the new 1
dwelling?
4 Name the town where the new 1
. dwelling will be erected.
5. What was done as revision 1? 1
6. Identify number 1. 4
7 Identify number 3 by giving the
abbreviation.
8. Identify number 4. 1
9. Identify number 5. 4
10. | Identify number 9. 1
11. | Identify number 11. 1
12. | Identify number 12. 1
13 Identify the number that indicates the 1
*__| boundary line.
14. | Describe the purpose of number 2. 1
15 Deduce the plot number of the existing 1
“| dwelling from FIGURE A.
16 What is omitted in Maple Street with 1
“| reference to number 6?

Copyright reserved

### Page 18

Downloaded from hlayiso.com

Civil Technology: Woodworking DBE/2022
SC/NSC

17 What leisure feature is located on the 4
*_| site plan?
418 Draw the north symbol to show that the 3
* | driveway side is facing east.
19 What is the purpose of the north
: 1
symbol on a house plan?
20 Which feature indicates that this is a 1
* | double-storey building?
21. | Deduce THREE faults from bedroom 2. 3
22, | Draw the symbol for a wash tub. 2
23. | Draw the symbol for a bath. 2
24. | Draw the symbol for a water meter. 2
Describe TWO reasons why the local
25. | municipality would not approve 2
FIGURE A.
Calculate the length of the house. 6
26. | Give your answer in m.
Show ALL calculations.
TOTAL: | 40

Copyright reserved

### Page 19

Downloaded from hlayiso.com

Civil Technology: Woodworking DBE/2022
SC/NSC

| CENTRE NUMBER: | | [| [ [ [ ]

[EXAMINATIONNUMBER: | | [| | | [| | | | [ | | J |

ANSWER SHEET 3.4

WALL

ASSESSMENT CRITERIA MARK] CM
Correctness of drawing 4
TOTAL: 4

Copyright reserved

### Page 20

Downloaded from hlayiso.com

Civil Technology: Woodworking DBE/2022
SC/NSC

| CENTRE NUMBER: LTT [ 7 7 7 Tt 4

[EXAMINATIONNUMBER: | | | | | | | | | | [| [ { 4

ANSWER SHEET 3.5
A Bc D
3.5.1
(3)
3.5.2
(3)
3.5.3
(4)

Copyright reserved

### Page 21

Downloaded from hlayiso.com

Civil Technology: Woodworking DBE/2022
SC/NSC

| CENTRE NUMBER: LTT TT tT 7 J

[EXAMINATIONNUMBER: | | | | | | | | | [| | [| J 4

ANSWER SHEET 4.5

ASSESSMENT CRITERIA MARK} CM
Correctness of drawing 10
Any TWO labels with dimensions 4

TOTAL: | 14

Copyright reserved

### Page 22

Downloaded from hlayiso.com

DBE/2022

Civil Technology: Woodworking
SC/NSC

[CENTRENUMBER: | | | | | | | |
[EXAMINATIONNUMBER: | | | | | | | | | |

ANSWER SHEET 4.6

ASSESSMENT CRITERIA MARK| CM

Correctness of drawing 8

TOTAL:| 8

Copyright reserved

### Page 23

Downloaded from hlayiso.com

DBE/2022

Civil Technology: Woodworking
SC/NSC
| CENTRE NUMBER: L |] J | J J
[EXAMINATIONNUMBER: | | | | | | | |
ANSWER SHEET 5.3
ASSESSMENT CRITERIA MARK cM
Correctness of drawing 4
Any TWO labels with dimensions 4
TOTAL: 8

Copyright reserved

### Page 24

Downloaded from hlayiso.com

Civil Technology: Woodworking DBE/2022
SC/NSC
| CENTRE NUMBER: LTT TTT TT
EXAMINATIONNUMBER: | | | | | | | | | | | | [|
ANSWER SHEET 5.4
aS >

‘ Cy ) > |
ASSESSMENT CRITERIA MARK cM
Correctness of drawing 9
Any TWO labels 2

TOTAL: 11

Copyright reserved

### Page 25

Downloaded from hlayiso.com

Civil Technology: Woodworking

SC/NSC

| CENTRE NUMBER: | | |

DBE/2022

[EXAMINATION NUMBER: | | |

ANSWER SHEET 6.5

ASSESSMENT CRITERIA MARK CM
Correctness of drawing 6
TOTAL: 6

Copyright reserved

### Page 26

Downloaded from hlayiso.com

Civil Technology: Woodworking DBE/2022
SC/NSC
[ CENTRE NUMBER: [TT TT TTT 4
[EXAMINATIONNUMBER: | | [| | | | | | [| | J J
ANSWER SHEET 6.6

DIRECTION OF GRAIN ————-
TONGUE AND GROOVE
FLOOR BOARDS

j=— SKIRTING
N QUADRANT
l

)) » Yj t JOIST

~—_—____|__ BEARER

ANT GUARD

WALL PLATE |
|__ DPC

~

BRICK
PIER

~a— NGL

FOUNDATION
ASSESSMENT CRITERIA MARK CM
Correctness of drawing 8
TOTAL: 8

Copyright reserved

### Page 27

Downloaded from hlayiso.com

Civil Technology: Woodworking

SC/NSC

| CENTRE NUMBER: TT I

DBE/2022

[EXAMINATION NUMBER: | |_|

ANSWER SHEET 6.7
ASSESSMENT CRITERIA MARK CM
Correctness of drawing 9
TOTAL: 9

Copyright reserved

## Related documents

- [Civil Technology May June 2022 (Civil Services) Afr](https://www.hlayiso.com/library/civil-technology-may-june-2022-civil-services-afr/a141cdd2-0859-4ede-bb4e-499b3261db3d) — Civil Technology · QP · 2022 · Afr
- [Civil Technology May June 2022 (Woodworking) Afr](https://www.hlayiso.com/library/civil-technology-may-june-2022-woodworking-afr/b7830db2-93f0-405b-b704-e06c38ed8339) — Civil Technology · QP · 2022 · Afr
- [Civil Technology May June 2022 (Civil Services) Eng](https://www.hlayiso.com/library/civil-technology-may-june-2022-civil-services-eng/97927c67-c7a8-40fb-af20-ad306ca6284c) — Civil Technology · QP · 2022 · Eng
- [Civil Technology May June 2022 (Construction) Afr](https://www.hlayiso.com/library/civil-technology-may-june-2022-construction-afr/c4a7cdae-7306-4e0c-a474-e8856468ab9d) — Civil Technology · QP · 2022 · Afr
- [CIV TECH GR12 QP SEPT2022 Woodworking Afrikaans](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2022-woodworking-afrikaans/c4790570-dabd-463c-94fa-aa1715b1a542) — Civil Technology · QP · 2022 · Afr
- [CIV TECH GR12 QP SEPT2022 Woodworking English](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2022-woodworking-english/c3b4a7c0-761a-45aa-a578-9b98afc86830) — Civil Technology · QP · 2022 · Eng

## More from Grade 12 Civil Technology

- [Civil Technology (Woodworking) (Afrikaans) June 2025 Possible Answers](https://www.hlayiso.com/library/civil-technology-woodworking-afrikaans-june-2025-possible-answers/c0a65d19-28ca-4ac3-8c61-d4627d2a3133) — Memo · 2025 · Afr
- [Civil Technology Nov 2025 (Construction) MG Eng](https://www.hlayiso.com/library/grade-12-civil-technology-2025-nsc-november-exam-memorandum/0e265899-dc44-4809-aabf-8f374f1af392) — Memo · 2025 · Eng
- [CIV TECH GR12 MEMO SEPT2024 Construction Afrikaans](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-construction-afrikaans/162bcc65-80ad-4384-b293-36da22468b06) — Memo · 2024 · Afr
- [CIV TECH GR12 MEMO SEPT2024 Civil Services English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-civil-services-english/c1f2441d-22ba-4ae6-9e56-137cc442080c) — Memo · 2024 · Eng
- [CIV TECH GR12 MEMO SEPT2024 Construction English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-construction-english/4d9c54ef-f526-46ad-82d4-8dd419eafb50) — Memo · 2024 · Eng
- [CIV TECH GR12 MEMO SEPT2024 Woodworking English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-woodworking-english/6e7f4be5-4ffb-4654-b98b-b4cc4dfc4cc7) — Memo · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.