# Civil Technology Grade 12 NSC November 2019 QP (Eng)

> Grade 12 Civil Technology question paper from the NSC November Exam 2019 (English), 23 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/civil-technology-nov-2019-construction-eng/458d41f9-0623-462b-8426-cd816ccb2b5a
- Updated: 2026-09-27
- Subject: Civil Technology
- Grade: Grade 12
- Document type: Question paper
- Year: 2019
- Exam period: NSC November Exam
- Curriculum: CAPS
- Pages: 23

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Civil Technology](https://www.hlayiso.com/library/grade-12/civil-technology) › [Civil Technology Grade 12 NSC November 2019 QP (Eng)](https://www.hlayiso.com/library/civil-technology-nov-2019-construction-eng/458d41f9-0623-462b-8426-cd816ccb2b5a)

## About this document

Civil Technology · Grade 12 · NSC November Exam · 2019. Question paper, 23 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

acti eeeeintee meme nenemnneenres
eneneeeerenee seten renee

Xe basic education

\ Department:
Ky Basic Education

We
SW REPUBLIC OF SOUTH AFRICA

NATIONAL
SENIOR CERTIFICATE
GRADE 12

an CIVIL TECHNOLOGY: CONSTRUCTION. :

" NOVEMBER 2019 "

PPE TTTTTTTerrerrerrerrrrrrrrrerrrrrerrerrrirrri
MARKS: 200 |
TIME: 3 hours

This question paper consists of 13 pages and 8 answer sheets.

| Copyright reserved Please turn over

### Page 2

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC

REQUIREMENTS:

1. Drawing instruments

2. A non-programmable calculator

3. ANSWER BOOK

INSTRUCTIONS AND INFORMATION

1. This question paper consists of SIX questions.

2. Answer ALL the questions.

3. Answer each question as a whole. Do NOT separate subsections of
questions.

4. Start the answer to EACH question on a NEW page.

5. Do NOT write in the margins of the ANSWER BOOK.

6. You may use sketches to illustrate your answers.

7. Write ALL calculations and answers in the ANSWER BOOK or on the
attached ANSWER SHEETS.

8. Use the mark allocation as a guide to the length of your answers.

9. Make drawings and sketches in pencil, fully dimensioned and neatly finished

off with descriptive titles and notes to conform to the SANS/SABS Code of
Practice for Building Drawings.

10. For the purpose of this question paper, the size of a brick should be taken as
220 mm x 110 mm x 75 mm.

11. Use your own discretion where dimensions and/or details have been omitted.

12. Answer QUESTIONS 2, 3.4, 3.5, 4.7, 5.6, 5.7, 6.6 and 6.7 on the attached
ANSWER SHEETS using drawing instruments where necessary.

13. Write your CENTRE NUMBER and EXAMINATION NUMBER on every
ANSWER SHEET and hand them in with your ANSWER BOOK, whether you
have used them or not.

14. Drawings in the question paper are NOT to scale due to electronic transfer.

15. Google Images was used as the source of all photographs and pictures.

Copyright reserved Please turn over

### Page 3

Downloaded from hlayiso.com

Civil Technology: Construction 3 DBE/November 2019
NSC

QUESTION 1: OHSA, SAFETY, MATERIALS, TOOLS, EQUIPMENT AND JOINING
(GENERIC)

Start this question on a NEW page.

4.1 Choose a description from COLUMN B that matches an item in COLUMN A.

Write only the fetter (A-K) next to the question numbers (1.1.1 to 1.1.8) in the
ANSWER BOOK, e.g. 1.1.9 L.

COLUMN A COLUMN B

1.1.1 PVA paint A _— method of finishing metal exposed to
heavy wear and tear conditions

1.1.2 Guard rail

B can be applied to walls
1.1.3. Powder coating

C keeps rungs free from oil and grease
1.1.4 Builder's hoist

D light material used in the
1.1.5 Ladder manufacturing of door and window

frames
1.1.6 Diagonal brace

. E used as a means to dispose of waste
1.1.7 Galvanising material and debris from elevated

areas in the fastest possible way
1.1.8 Chute

keeps scaffolds stable when erected

G __ transports workers, materials and
equipment between ground and
upper levels

H gates should always be kept shut
when the device is being used

1 prevents people from falling off the
scaffolds

J zine coating applied to the base of
metal

K__used to delay the drying time of paint
(8 x 1)

1.2 Explain TWO advantages of electroplating.

1.3 Name the process when freshly cast concrete is kept moist for a specific
period of time.

Copyright reserved Please turn over

(8)
(2)

(1)

### Page 4

Downloaded from hlayiso.com

Civil Technology: Construction 4 DBE/November 2019
NSC

1.4 Explain the purpose of keeping freshly cast concrete moist for a certain period

of time after the concrete has been cast. (1)
1.5 You are transporting material on a construction site from one place to

another. Describe TWO safety precautions that you will adhere to while

transporting the material. (2)
1.6 Describe ONE safety factor that must be considered when using scaffold

planks to erect a scaffold platform. (1)
17 FIGURE 1.7 below shows a surveying tool used on a building site.

FIGURE 1.7

1.7.1 Identify the tool above. (1)

1.7.2 Predict ONE consequence if the instrument is NOT set level. (1)
1.8 FIGURE 1.8 below shows a joining fixture that is used on building sites and in

workshops.

if

4
¥-

FIGURE 1.8
1.8.1 Identify the joining fixture above. (1)
1.8.2 Name the fixing agent that should be used with this joining fixture. (1)

1.8.3 Explain ONE use of this joining fixture. (1)
[20}

Copyright reserved Please turn over

### Page 5

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC

QUESTION 2: GRAPHICS AS MEANS OF COMMUNICATION (GENERICS)
Start this question on a NEW page.

FIGURE 2 on the next page shows different drawings that appear on a building plan.
Analyse the drawings and complete the table on ANSWER SHEET 2.

Copyright reserved Please turn over

### Page 6

Downloaded from hlayiso.com

Civil Technology: Construction 6

NSC

DBE/November 2019

K
7 \
On Lk) — PK
© T
TT GE ©
FIGURE A

SCALE 1 : 100

NOTE:

Contractors must verify all
dimensions and levels on site before
commencing work. Architects must
be notified of any discrepancies
immediately.

Wall thickness: External = 220 mm
Internal = 110 mm

ARCHITECT'S SIGNATURE
CLIENT'S SIGNATURE

The following electrical installation
should be installed in the kitchen:

Ww

The following symbol! shows the type
of brick finishing that will be used for
the building:

REVISION | DATE | DESCRIPTION
F 2600 ___y __3.400 _ y PRINTED BY: DATE OF PRINT:
KF + DLAMINIPRINTERS — 2019/04/01
w2 w1 DRAWING TITLE:
_s) a SITE PLAN STAND 502
* o o
e J oO [2 PROJECT:
PROPOSED DWELLING ON STAND 502,
ol BATHROOM @) ® DEO PARK
2 °
“ KITCHEN PROJECT NO. DRAWING NR.
GR 228-201 339P9
@) =
S DATE | DRAWN | CHECKED |SCALE
16/4/2019 | JP MBALI | P CARTER |1: 100
®) REFERENCE CODE
ol LOUNGE QP 2-2019
oO
a = WINDOW 4 WINDOW 2
BEDROOM
@[Q | 2000
aN e. = 900.
—*- Os ,
Wa wi a r, a RT
S| |. RB S| [N
FIGURE B bea F; , Ny
SCALE 1: 100 eS “ N
FIGURE 2 [40]

Copyright reserved

Please turn over

### Page 7

Civil Technology: Construction

Downloaded from hlayiso.com

DBE/November 2019
NSC

QUESTION 3: ROOFS, STAIRCASES AND JOINING (SPECIFIC)

Start this question on a NEW page.

3.1

3.2

3.3

3.4

3.5

Give ONE word/term for each of the following descriptions by choosing
a word/term from the list below. Write only the word/term next to
the question numbers (3.1.1 to 3.1.3) in the ANSWER BOOK, e.g.
3.1.4 50 mm round poles.

15°; 800mm; 36mm round poles; 10°; 38mm round poles;
650 mm; 45°; 550mm; 40 mm round poles

3.1.1 What is the minimum pitch of a roof when Class B fibre-cement
tiles are used to cover a roof?

3.1.2 What is the maximum distance of the spacing between roof trusses
for concrete roof tiles?

3.1.3 What are the dimensions of a purlin for thatch roofs?
Recommend ONE method of fixing balusters to the landing of a staircase.

Recommend ONE type of fastener one will use to fix galvanised steel straps
to roof trusses.

Use ANSWER SHEET 3.4 and draw a neat line diagram of the sectional front
view of a staircase with a landing.

Use the assessment criteria on the ANSWER SHEET as a guide.

Use ANSWER SHEET 3.5 and draw to scale 1 : 20 a close-coupled roof truss
with a pitch of 30° and a span of 3 metres resting on two supporting walls.
The eaves overhang is 400 mm.

Use the assessment criteria on the ANSWER SHEET as a guide.

Copyright reserved Please turn over

(1)

(1)
oo)
(1)

(1)

(10)

(15)
[30]

### Page 8

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC

QUESTION 4: EXCAVATIONS, FORMWORK, TOOLS, EQUIPMENT AND
MATERIALS (SPECIFIC)

Start this question on a NEW page.

41 The excavation of soil on a building site is necessary to establish a firm
foundation.
4.1.1 What is the minimum distance that excavated soil can be stored
from the trench? (1)
4.1.2 What is a safe distance for heavy machinery to move around
a deep excavation? (1)
4.1.3 Describe TWO reasons why an excavation can collapse. (2)
4.1.4 What is the maximum depth of a trench in which workers can work
without the sides of the trench being braced? (1)
4.1.5 What can help to prevent the sides of excavations from collapsing? (1)

4.2 FIGURE 4.2 below shows two types of shuttering used in excavations.
Study FIGURE 4.2 below and answer the questions that follow.

FIGURE 4.2
4.2.1 State where shuttering A and B will be used respectively. (2)
4.2.2 Name C and D. (2)

4.2.3 Compare FIGURE A with FIGURE B and state the difference
between the types of shuttering. (2)

Copyright reserved Please turn over

### Page 9

Downloaded from hlayiso.com

Civil Technology: Construction 9 DBE/November 2019
NSC
4.3 FIGURE 4.3 below shows a construction machine that is used on a building

site. Study FIGURE 4.3 and answer the questions that follow.

FIGURE 4.3

4.3.1 Identify the construction machine. (1)

4.3.2 Describe TWO methods that can be used to take care of this
construction machine. (2)

4.3.3 Describe TWO safety aspects that must be checked before using
the construction machine. (2)

44 What should be the minimum compressive strength of high-strength concrete
after 28 days if all conditions have been met? (1)
4.5 Name the THREE outcomes of the slump test. (3)
46 Which water-retaining material can be used to keep fresh concrete moist? (1)

47 Use ANSWER SHEET 4.7 and complete the drawing of a vertical section of
the formwork for a concrete beam with the floor slab in good proportion.

Use the assessment criteria on the ANSWER SHEET as a guide. (18)
[40]

Copyright reserved Please turn over

### Page 10

Downloaded from hlayiso.com

Civil Technology: Construction 1 DBE/November 2019
NSC

QUESTION 5: PLASTER AND SCREED, BRICKWORK AND GRAPHICS AS
MEANS OF COMMUNICATION (SPECIFIC)

Start this question on a NEW page.

5.1 Name ONE type of plaster finish that can be applied to brick walls. (1)
5.2 State the first step before plastering an internal wall two weeks after it has

been built. (1)
5.3 State ONE property of good plaster. (1)
5.4 State the average thickness of screed. (1)

5.5 FIGURE 5.5 below shows a vertical sectional view through paving.
Study FIGURE 5.5 and answer the questions that follow.

A
a -——— B
. .
_ oe pe D
FIGURE 5.5
5.5.1 Name A to D. (4)
6.5.2 Give ONE reason why construction failure can occur in paved

areas. (1)

5.6 ANSWER SHEET 5.6 shows the outlines of the top view of a cavity wall with
a dead end.

Use ANSWER SHEET 5.6 and draw ONE brick course of the cavity wall with
a wall tie. (7)

5.7 Use ANSWER SHEET 5.7 and draw to scale 1 : 5 a horizontal sectional view
through a face brick wall to show how a timber window frame stile is built into
a wall.

Use the assessment criteria on the ANSWER SHEET as a guide. (14)
[30]

Copyright reserved Please turn over

### Page 11

Downloaded from hlayiso.com

Civil Technology: Construction 11 DBE/November 2019
NSC

QUESTION 6: REINFORCEMENT IN CONCRETE, FOUNDATIONS, CONCRETE
FLOORS AND QUANTITIES (SPECIFIC)

Start this question on a NEW page.

6.1 Various options are given as possible answers to the following questions.
Choose the answer and write only the letter (A-D) next to the question
numbers (6.1.1 to 6.1.5) in the ANSWER BOOK, e.g. 6.1.6 C.

6.1.1 The striking of formwork for a deck depends on the ...

A average temperature.

B __ thickness of the concrete.
C properties of the concrete.
D_ All the above-mentioned

6.1.2 The minimum thickness of a suspended reinforced concrete floor
is ...
A 100 mm.
B 150 mm.
Cc 160 mm.
D 140 mm.

6.1.3 What type of foundation will be used where the site is NOT level?

A __ Strip foundation
B_ Floating foundation
C_ Step foundation
D_ Raft foundation
6.1.4 The internal walls that support a suspended concrete floor must

be...

A _ vertically in line with the external walls.

B__ one brick course below the floor.

C horizontally in line with the external walls.
D__ one brick course above the floor.

6.1.5 The minimum cover depth for concrete with reinforcement exposed
to soft unpolluted air is ...

A 60mm.
B 40mm.
C 30mm.
D 20mm.

6.2 Give TWO reasons for using pile foundations.

6.3 Recommend THREE types of equipment that can be used to install precast
concrete piles.

Copyright reserved Please turn over

(1)

(1)

(1)

(1)

(1)
(2)

(3)

### Page 12

Downloaded from hlayiso.com

Civil Technology: Construction 12 DBE/November 2019
NSC
6.4 Differentiate between the installation methods of steel-tube caisson piles and
precast concrete piles. (2)

6.5 FIGURE 6.5 below shows a part of a floor construction. Study FIGURE 6.5
and answer the questions that follow.

=e N
A Se @

$ -a}-a
FIGURE 6.5
6.5.1 Name the type of floor construction. (1)
6.5.2 Describe THREE factors that should be considered after casting
the concrete for the floor construction. (3)
6.5.3 What type of concrete is used for this type of floor? (1)
6.5.4 What will determine the spacing between parts A? (1)

6.5.5 Predict what will happen if the floor is subjected to a lot of
movement before the concrete has reached its maximum strength. (1)

6.6 ANSWER SHEET 6.6 shows a wall and an incomplete reinforced concrete
beam.

Use ANSWER SHEET 6.6 and draw, in good proportion, the reinforcement
that should be placed in the beam that is resting on the wall.

Use the assessment criteria on the ANSWER SHEET as a guide. (11)

Copyright reserved Please turn over

### Page 13

Downloaded from hlayiso.com

Civil Technology: Construction 13 DBE/November 2019
NSC

6.7 FIGURE 6.7 below shows the floor plan of a building with a gable roof.

The external measurements are 9 000 mm x 4 000 mm.

4 000

9 000 150

+~—

FIGURE 6.7

Use the following specifications:

e The walls are 220 mm thick.
e The centre-to-centre spacing of the roof trusses are 1 070 mm.

Use the dimension paper in ANSWER SHEET 6.7 and calculate the quantities
of the following materials:

6.7.1 Total length of wall plate needed in metres

6.7.2 Number of roof trusses needed

TOTAL:

Copyright reserved

(5)

(5)
[40]

200

### Page 14

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC
| CENTRE NUMBER: ee ee |
[EXAMINATION NUMBER: | | LJ [|] TT TT Tl
ANSWER SHEET 2
NO. QUESTION ANSWER MARKS
1 Identify the elevation in FIGURE A. 1
2 Identify the type of roof that is used on 1
the building in FIGURE A.
3 Identify number 1. 1
4 Identify number 4. 1
5 Identify number 5. 1
6 Identify number 7. 1
7 Identify number 8. 1
8 Identify number 12. 1
9 Identify number 13. 41
10 Identify number 15. 1
Identify the company that printed the
1 oan 1
building plan.
Name a suitable material that can
12 be used for the manufacturing of 41
number 2.
Name the drawing symbol in the
13 column for the notes in FIGURE 2 that 1
must be installed in the kitchen.
Name the drawing symbol in the
14 column for the notes in FIGURE 2 that 1
indicates the type of bricks for the
building.
Name a material that should NOT be
15 used to manufacture the frame of 1
number 9 for coastal areas.

Copyright reserved

### Page 15

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC

Name a material that can be used to
16 manufacture the sanitary fitting
indicated by number 11.

17 | Who checked the building plan?

18 How many types of windows are used
in FIGURE B?

What does the abbreviation NGL at

19 number 6 stand for?

20 Give the reference code for this plan.

21 Which room will electrical symbol 16
serve?

22 Describe the purpose of number 3.

Explain what the curved lines
23 between the electrical installations in
FIGURE B indicate.

Explain why the light switch is
24 mounted on the outside of the
bathroom.

Identify in FIGURE 2 which elevation

25 does NOT have windows.

26 Identify the thickness of the internal
wall in FIGURE 2.

Differentiate between symbols 13 and

27 15 in terms of their purpose.

Justify why FIGURE B is a ground

28 floor plan.

Copyright reserved

### Page 16

Downloaded from hlayiso.com

Civil Technology: Construction

NSC

DBE/November 2019

29

Predict what will happen if number 10
is NOT installed.

30

Redraw the staircase in FIGURE B in
the adjacent column and indicate the
direction of the flight with arrows.

31

Calculate the total length of the wall
on the eastern side of the building.
Show ALL calculations.

TOTAL:

40

Copyright reserved

### Page 17

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC

[ CENTRE NUMBER: TT tT tT tT tT TT]

| EXAMINATION NUMBER: [| TT I | | 7 |

ANSWER SHEET 3.4

ASSESSMENT CRITERIA MARK | CANDIDATE'S
MARK

Wall

Landing

Baluster

Handrails

THREE treads
Concrete

Any TWO labels
Correctness of drawing

Slel|N/s]4/y)a)3)/=

TOTAL:

Copyright reserved

### Page 18

Iso.com

SL

TWLOL

} = yoeuoour 4AI4 uey) Slop
@ =JoalOoul YNOS 40 AAYHL

€=  yoavoou!l OML JO INO
rayeos yo uoneayddy

ueds ou} JO UOISUSWIG

sjeqe| SAH. Auy

Downloaded from hlay

weag aif

weoq abply

siayey

pavesal yysuAdoy

s'€ LASHS YAMSNV

sayeld |e

| ?Y3E1NNN NOILVNIAVXG |

QUAN Nee

SIIEM

YvIA
S.ALVGIGNVO

YVIN

VIdSLIdD LNSAWSSSSSV

6102 JequisAoN/agq

OSN

TUASINNN SYN |

uononsjsuog :ABojouYde | |IAID.

### Page 19

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC
| CENTRE NUMBER: LT | [| |] [| [ 7 J 4]
[EXAMINATION NUMBER: |__| [TT TT] | |
ANSWER SHEET 4.7
aS
[ ic |
°o
3]
oo
a 0
FIGURE 4.7
ASSESSMENT CRITERIA MARK | CANDIDATE'S
MARK
Shuttering board sides 2
Cleats 2
Fixing plates 2
Wedges 2
Braces/Struts 4
Bearer 1
Any THREE labels 3
Correctness of drawing 2
TOTAL: 18

Copyright reserved

### Page 20

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC

[CENTRE NUMBER: TTT TTT TT

[EXAMINATIONNUMBER: | | | | | | | | | [| | | | 4

ANSWER SHEET 5.6

FIGURE 5.6

ASSESSMENT CRITERIA MARK | CANDIDATE'S
MARK

Correctness of drawing
Dead end

Inner skin of cavity wall
Outer skin of cavity wail
Wall tie

N]}s/—3/s p/p

TOTAL:

Copyright reserved

### Page 21

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC

[ CENTRE NUMBER: TTT TT TT TT

[EXAMINATIONNUMBER: | | | | | | | | | | | | JI id

ANSWER SHEET 5.7

ASSESSMENT CRITERIA MARK | CANDIDATE'S
MARK

Frame stile: 105 mm x 70 mm

Window stile/Casement stile: 60 mm x 45 mm
Frame tie/lug: 25 mm wide
Glass: 3 mm thick

Putty

Internal window sill
External window sill

DPC

Any ONE label

Application of scale:

ONE or TWO incorrect
THREE or FOUR incorrect
More than FIVE incorrect

a }o3)o3}/3] 4) 4)/-.)/po|p

touou

3
2
1

TOTAL: 14

Copyright reserved

### Page 22

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC

[CENTRENUMBER: | | | | | | | | 4

[EXAMINATION NUMBER: | [| | | | | [|] [ 7 TT 4]

ANSWER SHEET 6.6

FIGURE 6.6

ASSESSMENT CRITERIA MARK | CANDIDATE'S
MARK
Anchor bar 2
Shear bar 2
Stirrups/Binders 2
Main bar 2 |
Minimum concrete cover 1
Any ONE label 1
Correctness of drawing 1
TOTAL: 11

Copyright reserved

### Page 23

Downloaded from hlayiso.com

Civil Technology: Construction DBE/November 2019
NSC

[ CENTRE NUMBER: TTT TTT TT 4)

[EXAMINATIONNUMBER: | | | | | | [| | | | | [| [4

ANSWER SHEET 6.7

A B c D

(10)

Copyright reserved

## Related documents

- [Civil Technology Nov 2019 (Woodworking) Eng](https://www.hlayiso.com/library/civil-technology-nov-2019-woodworking-eng/b6e1822a-1416-45e5-97a8-13da0db177cd) — Civil Technology · QP · 2019 · Eng
- [Civil Technology Nov 2019 (Civil Services) Eng](https://www.hlayiso.com/library/civil-technology-nov-2019-civil-services-eng/52c5e936-0c5c-4ea4-8929-a76fdaa48f02) — Civil Technology · QP · 2019 · Eng
- [Civil Technology Nov 2019 (Civil Services) Afr](https://www.hlayiso.com/library/civil-technology-nov-2019-civil-services-afr/560716c2-e3ed-412e-90e8-42d36162ee0d) — Civil Technology · QP · 2019 · Afr
- [Civil Technology Nov 2019 (Woodworking) Afr](https://www.hlayiso.com/library/civil-technology-nov-2019-woodworking-afr/1a837a2b-2575-4096-939a-dd10f12a0bf9) — Civil Technology · QP · 2019 · Afr
- [Civil Technology Nov 2019 (Civil Services) Memo Afr](https://www.hlayiso.com/library/civil-technology-nov-2019-civil-services-memo-afr/13c03cd5-cfa4-42cf-9a7c-5d7b0e1069f0) — Civil Technology · Memo · 2019 · Afr
- [Civil Technology Nov 2019 (Civil Services) Memo Eng](https://www.hlayiso.com/library/civil-technology-nov-2019-civil-services-memo-eng/53bd979c-a0bb-411f-960b-1f8755cd4874) — Civil Technology · Memo · 2019 · Eng

## More from Grade 12 Civil Technology

- [Civil Technology (Woodworking) (Afrikaans) June 2025 Possible Answers](https://www.hlayiso.com/library/civil-technology-woodworking-afrikaans-june-2025-possible-answers/c0a65d19-28ca-4ac3-8c61-d4627d2a3133) — Memo · 2025 · Afr
- [Civil Technology Nov 2025 (Construction) MG Eng](https://www.hlayiso.com/library/grade-12-civil-technology-2025-nsc-november-exam-memorandum/0e265899-dc44-4809-aabf-8f374f1af392) — Memo · 2025 · Eng
- [CIV TECH GR12 MEMO SEPT2024 Construction Afrikaans](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-construction-afrikaans/162bcc65-80ad-4384-b293-36da22468b06) — Memo · 2024 · Afr
- [CIV TECH GR12 MEMO SEPT2024 Civil Services English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-civil-services-english/c1f2441d-22ba-4ae6-9e56-137cc442080c) — Memo · 2024 · Eng
- [CIV TECH GR12 MEMO SEPT2024 Construction English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-construction-english/4d9c54ef-f526-46ad-82d4-8dd419eafb50) — Memo · 2024 · Eng
- [CIV TECH GR12 MEMO SEPT2024 Woodworking English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-woodworking-english/6e7f4be5-4ffb-4654-b98b-b4cc4dfc4cc7) — Memo · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
