# Civil Technology Grade 12 Gauteng June 2025 QP (Afr)

> Grade 12 Civil Technology question paper from the Gauteng June Exam 2025 (Afrikaans), 47 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/civil-technology-woodwork-english-and-afrikaans-june-2025-question-paper/c8edd459-5237-48e0-8588-69d7ecd7f8e5
- Updated: 2026-09-27
- Subject: Civil Technology
- Grade: Grade 12
- Language: Afrikaans
- Document type: Question paper
- Year: 2025
- Exam period: Gauteng June Exam
- Curriculum: CAPS
- Pages: 47

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Civil Technology](https://www.hlayiso.com/library/grade-12/civil-technology) › [Civil Technology Grade 12 Gauteng June 2025 QP (Afr)](https://www.hlayiso.com/library/civil-technology-woodwork-english-and-afrikaans-june-2025-question-paper/c8edd459-5237-48e0-8588-69d7ecd7f8e5)

## About this document

Civil Technology · Grade 12 · Gauteng June Exam · 2025 · Afrikaans. Question paper, 47 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

JUNE EXAMINATION
 JUNIE EKSAMEN
GRADE / GRAAD 12
       2025

   CIVIL TECHNOLOGY:
  SIVIELE TEGNOLOGIE:
     WOODWORKING
    HOUTBEWERKING

              TIME/TYD:     3 hours/uur
              MARKS/PUNTE: 200
              18 pages + 4 answer sheets
              18 bladsye + 4 antwoordblaaie

                                        Please turn over
                                       Blaai om asseblief

### Page 2

CIVIL TECHNOLOGY: WOODWORKING                         2
                                                              GR12 0625

REQUIREMENTS:

1.    Drawing instruments
2.    A non-programmable calculator

INSTRUCTIONS AND INFORMATION

1.    This question paper consists of SIX questions.

2.    Answer ALL the questions.

3.    Number the answers correctly according to the numbering system used in this question
      paper.

4.    Start the answer to EACH question on a NEW page.

5.    Do NOT write in the margin of the ANSWER BOOK.

6.    You may use sketches to illustrate your answers.

7.    Write ALL calculations and answers in the ANSWER BOOK or on the attached
      ANSWER SHEETS.

8.    Use the mark allocation as a guide to the length of your answers.

9.    Make drawings and sketches in pencil, fully dimensioned and neatly finished off with
      descriptive titles and notes to conform to the SANS/SABS Code of Practice for Building
      Drawings.

10.   For the purpose of this question paper, the size of a brick should be taken as
      220 mm x 110 mm x 75 mm.

11.   Use your own discretion where dimensions and/or details have been omitted.

12.   Answer QUESTIONS 2; 3.5; 5.6 and 6.1 on the attached ANSWER SHEETS as
      prescribed in each question.

13.   Drawings in the question paper are NOT according to scale due to electronic transfer.

14.   Write neatly and legibly.

                                                                                   Please turn over

### Page 3

SIVIELE TEGNOLOGIE: HOUTBEWERKING                      2
                                                               GR12 0625

BENODIGDHEDE:

1.    Tekeninstrumente
2.    ŉ Nie-programmeerbare sakrekenaar

INSTRUKSIES EN INLIGTING

1.    Hierdie vraestel bestaan uit SES vrae.

2.    Beantwoord AL die vrae.

3.    Nommer die antwoorde korrek volgens die nommeringstelsel wat in hierdie vraestel
      gebruik word.

4.    Begin die antwoord op ELKE vraag op ŉ NUWE bladsy.

5.    MOENIE in die kantlyne van die ANTWOORDBOEK skryf NIE.

6.    Jy mag sketse gebruik om jou antwoorde te illustreer.

7.    Skryf ALLE berekeninge en antwoorde in die ANTWOORDBOEK of op die aangehegte
      ANTWOORDBLAAIE.

8.    Gebruik die puntetoekenning as ŉ riglyn vir die lengte van jou antwoorde.

9.    Maak tekeninge en sketse in potlood, volledig gemaatskryf en netjies met beskrywende
      opskrifte en aantekeninge afgerond, in ooreenstemming met dieSANS/SABS se
      Gebruikskode vir Boutekenepraktyk.

10.   Vir die doel van hierdie vraestel moet die grootte van 'n baksteen as
      220 mm x 110 mm x 75 mm geneem word.

11.   Gebruik jou eie oordeel waar afmetings en/of inligting ontbreek.

12.   Beantwoord VRAAG 2; 3.5; 5.6 en 6.1 op die aangehegte ANTWOORDBLAAIE soos
      aangedui in elke vraag.

13.   Tekeninge in die vraestel is NIE volgens skaal NIE as gevolg van elektroniese oordrag.

14.   Skryf netjies en leesbaar.

                                                                                  Blaai om asseblief

### Page 4

CIVIL TECHNOLOGY: WOODWORKING                      3
                                                              GR12 0625

QUESTION 1: OHS, SAFETY, MATERIALS, TOOLS, EQUIPMENT AND JOINING
            (GENERIC)

Start this question on a NEW page.

1.1   Choose a description from COLUMN B that matches an item in COLUMN A. Write
      only the letter (A – N) next to the question numbers (1.1.1 to 1.1.10) in the
      ANSWER BOOK, e.g. 1.1.11 O.

              COLUMN A                              COLUMN B
       1.1.1 Conveyor belt             A Process takes 38 days
       1.1.2 Builder’s hoist           B Has rungs
       1.1.3 Ladder                    C Based on visual inspections and visible
       1.1.4 Curing                        features
       1.1.5 Powder coating            D Expensive
       1.1.6 Painting                  E Strength usually refers to bending
       1.1.7 Galvanising                   strength
       1.1.8 Mechanically graded       F Gates must be shut when in use
              timber                   G Loose material must never be dropped
       1.1.9 Visually graded timber        from elevated areas
       1.1.10 Linseed oil              H Improves the durability of concrete by
                                           reducing cracks
                                       I   Changes the surface properties of a
                                           metal
                                       J Suitable for hardwood furniture
                                       K Apply using a compressor and a spray
                                           gun
                                       L To be used by 2 or more people
                                       M To cover iron/steel with a layer of zinc
                                           to prevent it from rusting
                                       N Enhances the appearance of surfaces
                                                                             (10 x 1) (10)

                                                                                Please turn over

### Page 5

SIVIELE TEGNOLOGIE: HOUTBEWERKING                      3
                                                             GR12 0625

VRAAG 1: WGBV, VEILIGHEID, MATERIAAL, GEREEDSKAP EN TOERUSTING
        (GENERIES)

Begin hierdie vraag op ŉ NUWE bladsy.

1.1   Kies ŉ beskrywing uit KOLOM B wat by ŉ item in KOLOM A pas. Skryf slegs die
      letter (A – N) langs die vraagnommers (1.1.1 tot 1.1.10) in die ANTWOORDBOEK
      neer, bv. 1.1.11 O.

               KOLOM A                                KOLOM B
       1.1.1 Vevoerband                 A Proses vat 38 dae
       1.1.2 Bouershyser                B Het laaiers
       1.1.3 Leer                       C Gebaseer op visuele inspeksies en
       1.1.4 Nabehandeling                  visuele kenmerke
       1.1.5 Poeierbestryking           D Duur
       1.1.6 Verf                       E Sterkte verwys na buigsterkte
       1.1.7 Galvanisering              F Hekke moet toe wees tydens gebruik
       1.1.8 Meganies gegradeerde       G Los materiaal moet nooit laat val word
             hout                           van hoë stellasies af nie
       1.1.9 Visueel gegradeerde        H Verbeter duursaamheid van beton
             hout                           deur krake te verminder
       1.1.10 Lynolie                   I   Verander die oppervlakeienskappe
                                            van in metaal
                                        J Geskik vir hardehoutmeubels
                                        K Dien toe met ŉ kompressor en 'n
                                            spuitpistool
                                        L om deur twee of meer mense gebruik
                                            te word
                                        M Om basismetaal met ŉ sinklaag te
                                            bedek om korrosie te voorkom
                                        N Verbeter die voorkoms van
                                            oppervlaktes
                                                                               (10 x 1) (10)

                                                                                Blaai om asseblief

### Page 6

CIVIL TECHNOLOGY: WOODWORKING                        4
                                                            GR12 0625

1.2   Various options are provided as possible answers to the following questions.
      Choose the answer and write only the letter (A – D) next to the question
      numbers (1.2.1 to 1.2.5) in the ANSWER BOOK, e.g. 1.2.6 E.

      1.2.1 Electroplating is the process of …

             A     applying a plastic coating on metal using electrolysis.
             B     coating metal with another metal using electrolysis.
             C     applying paint to a metal by means of magnetism.
             D     applying liquid zinc to a metal using pressure.                          (1)

      1.2.2 Why would you coat a metal with a layer of paint?

             A     To resist extreme temperatures
             B     To prevent corrosion
             C     To prevent warping
             D     Only A and B                                                             (1)

      1.2.3 When using a scaffold, it must be inspected to ensure that …

             A     the scaffold is not attached to the building.
             B     the scaffold platform is supported every 4 metres.
             C     the scaffold is free from any defects.
             D     All the above-mentioned.                                                 (1)

      1.2.4 … of scaffolds should be secured vertically.

             A     Transoms
             B     Diagonal braces
             C     Standards
             D     Base plates                                                              (1)

      1.2.5 The employer must ensure that the rungs of wooden ladders are …

             A     not painted.
             B     free from grease.
             C     not cracked.
             D     All of the above-mentioned.                                              (1)

                                                                                Please turn over

### Page 7

SIVIELE TEGNOLOGIE: HOUTBEWERKING                      4
                                                             GR12 0625

1.2   Verskeie opsies word as moonlike antwoorde op die volgende vrae gegee. Kies
      die antwoord en skryf slegs die letter (A – D) langs die vraagnommers
      (1.2.1 tot 1.2.5) in die ANTWOORDBOEK neer, bv. 1.2.6 E.

      1.2.1 Elektroplatering is die proses om …

            A      ŉ plastieklaag op metaal aan te bring deur elektrolise te gebruik.
            B      een metaal met ŉ ander metaal te bedek deur elektrolise te
                   gebruik.
            C      verf op ’n metaal aan te bring deur magnetisme te gebruik.
            D      vloeibare sink op ŉ metaal toe te pas deur druk te gebruik.                (1)

      1.2.2 Waarom sal jy ’n metaal met n laag verf bedek?

            A      Om uiterste temperature te weerstaan
            B      Om korrosie te voorkom
            C      Om kromtrekking te voorkom
            D      Slegs A en B                                                               (1)

      1.2.3 Wanneer ŉ steier gebruik word, moet dit geȉnspekteer word om te
            verseker dat ...

            A      die steier nie aan die gebou vasgemaak is nie.
            B      die steierplatform elke 4 meter ondersteun is.
            C      die steier vry is van enige defekte.
            D      Al die bogenoemde.                                                         (1)

      1.2.4 … van steiers moet vertikaal vasgeheg wees.

            A      Kalfrelings
            B      Diagonale stutte
            C      Staanders
            D      Basisplate                                                                 (1)

      1.2.5 Die werkgewer moet verseker dat die sporte van houtlere …

            A      nie geverf is nie.
            B      vry van ghries is.
            C      nie gekraak is nie.
            D      Al die bogenoemde.                                                         (1)

                                                                                Blaai om asseblief

### Page 8

CIVIL TECHNOLOGY: WOODWORKING                      5
                                                             GR12 0625

1.3   FIGURE 1.3 below shows a tool that is used in the building industry.

                                       FIGURE 1.3

      1.3.1 Identify the tool shown above.                                              (1)

      1.3.2 Explain the use of the tool in FIGURE 1.3.                                  (1)

1.4   Explain what could happen if the ends of scaffold planks exceed 230 mm
      beyond the last support.                                                          (1)

1.5   Explain the safety purpose of the following members of a scaffold:

      1.5.1 Guardrail                                                                   (1)

      1.5.2 Toe-board/Kickboard                                                        (1)
                                                                                      [20]

                                                                               Please turn over

### Page 9

SIVIELE TEGNOLOGIE: HOUTBEWERKING                    5
                                                               GR12 0625

1.3   FIGUUR 1.3 hieronder toon ŉ gereedskapstuk wat in die boubedryf gebruik
      word.

                                        FIGUUR 1.3

      1.3.1 Identifiseer die gereedskapstuk hierbo.                                        (1)

      1.3.2 Verduidelik die gebruik van die gereedskapstuk in FIGUUR 1.3.                  (1)

1.4   Verduidelik wat kan gebeur indien die ente van steierplanke die laaste stut met
      meer as 230 mm oorskry.                                                              (1)

1,5   Verduidelik die veiligheidsdoel van die volgende lede van ŉ steier:

      1.5.1 Skutreling                                                                     (1)

      1.5.2 Skopplaat                                                                     (1)
                                                                                         [20]

                                                                                Blaai om asseblief

### Page 10

CIVIL TECHNOLOGY: WOODWORKING                               6
                                                              GR12 0625

QUESTION 2:      GRAPHICS AS MEANS OF COMMUNICATION (GENERIC)

Start this question on a NEW page.
FIGURE 2 below shows drawings that appear on a building plan. Analyse the drawings and
complete the table on ANSWER SHEET 2.

                                                      NOTE:
                                                      Contractors must verify all dimensions and levels
                                                      on site before commencing work. Architects must
                                                      be notified immediately of any discrepancies.

                                                      ARCHITECT'S SIGNATURE ………………

                                                      CLIENT'S SIGNATURE …………….……

                                                      The following must be placed in the front of the
                                                      sliding door:

                                                      Access to the first floor must be by means of a:

                       FIGURE A
                                                      REVISION        DATE           DESCRIPTION

                                                      PRINTED BY:                DATE OF PRINT:
                                                      NKOSI PRINTERS                2018/10/02

                                                      DRAWING TITLE:
                                                      SITE PLAN STAND: 1843
               BATHROOM
                                                      PROJECT:
                            LOUNGE
                                                      PROPOSED DWELLING ON STAND 1843,
                                                      DIEPRIVIER

                                                      PROJECT NO.                 DRAWING NO.
                                                      GR 557-102                  5597P9

              OFFICE                                     DATE:            DRAWN:           CHECKED:
                                                       25/04/2018         JP MALOI          P. BRITZ

                                                      REFERENCE CODE:             SCALE:
                                                      QP 1- 2018                  1: 100

                                                         WINDOW 2                    WINDOW 3

                       FIGURE B
                                      FIGURE 2                                                       [40]

                                                                                       Please turn over

### Page 11

SIVIELE TEGNOLOGIE: HOUTBEWERKING                             6
                                                             GR12 0625

VRAAG 2: GRAFIKA AS KOMMUNIKASIEMIDDEL (GENERIES)
Begin hierdie vraag op 'n NUWE bladsy.
FIGUUR 2 hieronder toon tekeninge wat op 'n bouplan verskyn. Ontleed die tekeninge en
voltooi die tabel op ANTWOORDBLAD 2.

                                                      LET WEL:
                                                      Kontrakteurs moet alle afmetings en vlakke op
                                                      die terrein verifieer voordat hulle met werk begin.
                                                      Argitekte moet onmiddellik van enige
                                                      teenstrydighede in kennis gestel word.

                                                      ARGITEK SE HANDTEKENING ………………

                                                      KLIËNT SE HANDTEKENING …………………

                                                      Die volgende moet voor die glydeur geplaas
                                                      word:

                                                      Toegang tot die eerste verdieping moet deur
                                                      middel van ŉ:

                     FIGUUR A
                                                        HERSIE-         DATU
                                                                                      BESKRYWING
                                                         NING            M

                                                      GEDRUK DEUR:               DATUM VAN DRUK:
                                                      NKOSI-DRUKKERS                2018/10/02

                                                      TEKENTITEL:
                                                      TERREINPLAN STAANPLEK 1843
               BADKAMER
                                                      PROJEK:
                            SITKAMER                  VOORGESTELDE WONING OP ERF 1843,
                                                      DIEPRIVIER

                                                      PROJEK NR.                   TEKENING NR.
                                                      GR 557-102                   5597P9

             KANTOOR                                    DATUM:           GETEKEN:          NAGEGAAN:
                                                       25/04/2018        JP MALOI           P. BRITZ

                                                      VERWYSINGSKODE:              SKAAL:
                                                      QP 1- 2018                   1: 100

                                                         VENSTER 2                  VENSTER 3

                     FIGUUR B

                                       FIGUUR 2                                                      [40]

                                                                                      Blaai om asseblief

### Page 12

CIVIL TECHNOLOGY: WOODWORKING                       7
                                                              GR12 0625

QUESTION 3: QUANTITIES AND JOINING

Start this question on a NEW page.

3.1   Write a description that illustrates the method of fastening a Rawl bolt into a
      brick wall for each of the illustrations shown in COLUMN A. Write only the
      question numbers (3.1.1 to 3.1.5) as indicated in COLUMN B in your ANSWER
      BOOK, followed by the explanation, e.g. 3.1.6 Mark the hole for the Rawl bolt.

                 COLUMN A                                COLUMN B
                                          3.1.1

                                          3.1.2

                                          3.1.3

                                          3.1.4

                                          3.1.5

                                                                                             (5)

                                                                                 Please turn over

### Page 13

SIVIELE TEGNOLOGIE: HOUTBEWERKING               7
                                                            GR12 0625

VRAAG 3: HOEVEELHEDE EN VERBINDING

Begin hierdie vraag op ŉ NUWE bladsy.

3.1   Skryf ŉ beskrywing wat die hegging van ŉ Rawlbout in ŉ baksteen muur in
      KOLOM A illustreer. Skryf slegs die vraagnommers (3.1.1 tot 3.1.5) soos
      aangetoon in KOLOM B in jou ANTWOORDBOEK, bv. 3.1.6 Merk die gat vir die
      Rawlbout.

                 KOLOM A                            KOLOM B
                                        3.1.1

                                        3.1.2

                                        3.1.3

                                        3.1.4

                                        3.1.5

                                                                                      (5)

                                                                        Blaai om asseblief

### Page 14

CIVIL TECHNOLOGY: WOODWORKING                        8
                                                              GR12 0625

3.2   FIGURE 3.2 below shows fasteners.

                                         FIGURE 3.2

      3.2.1   Identify the fasteners shown above.                                             (1)

      3.2.2   Explain the THREE steps you would follow to attach a feature utilising
              the above fastener to a brick wall, if the hole has been marked.                (3)

3.3   FIGURES A and B below show woodworking joints.

                    FIGURE A                           FIGURE B

      3.3.1   Identify the woodworking joints illustrated above.                              (2)

      3.3.2   State where each type of joint can be used.                                     (2)

                                                                                  Please turn over

### Page 15

SIVIELE TEGNOLOGIE: HOUTBEWERKING                     8
                                                               GR12 0625

3.2   Figuur 3.2 hieronder toon hegstukke.

                                         FIGUUR 3.2

      3.2.1   Identifiseer die hegstukke hierbo.                                               (1)

      3.2.2   Verduidelik die DRIE stappe wat jy sal volg om ŉ voorwerp aan ŉ
              baksteenmuur te heg met behulp van die hegstuk, as die gat klaar
              gemerk is.                                                                       (3)

3.3   FIGUUR A en B hieronder toon houtwerk voeë.

                 FIGUUR A                             FIGUUR B

      3.3.1   Identifiseer die houtwerk voeë wat hierbo geïllustreer is.                       (2)

      3.3.2   Noem waar elke tipe voeë gebruik kan word.                                       (2)

                                                                                 Blaai om asseblief

### Page 16

CIVIL TECHNOLOGY: WOODWORKING              9
                                                              GR12 0625

3.4   FIGURE 3.4 shows the attachment of a ceiling boqard to battens.

                                       FIGURE 3.4

      3.4.1   Identify E, G and H.                                                  (3)

      3.4.2   Explain the purpose of D and F.                                       (2)

                                                                        Please turn over

### Page 17

SIVIELE TEGNOLOGIE: HOUTBEWERKING         9
                                                                  GR12 0625

3.4   FIGUUR 3.4 toon die vashegting van ’n plafonbord aan latwerk.

      3.4.1   Identifiseer E, G en H.                                                 (3)

      3.4.2   Veduidelik die doel van D en F.                                         (2)

                                                                        Blaai om asseblief

### Page 18

CIVIL TECHNOLOGY: WOODWORKING                     10
                                                                GR12 0625

3.5   FIGURE 3.5 below shows the floor plan of a building with a gable roof. Study the
      figure and answer the questions that follow. Show ALL calculations.

                                          FIGURE 3.5

      Use the following specifications:

             The walls are 220 mm thick.
             The length of the rafter is 3 600 mm.
             The centre-to-centre spacing between purlins is 900 mm.
             The overhang of the roof at the fascia board ends is 150 mm.

      Use ANSWER SHEET 3.5 and calculate the following:

      3.5.1     The internal measurements                                                     (2)

      3.5.2     The length of the wall plates                                                 (3)

      3.5.3     The number of purlins needed                                                  (3)

      3.5.4     The area of roof underlay needed                                           (4)
                                                                                          [30]

                                                                                 Please turn over

### Page 19

SIVIELE TEGNOLOGIE: HOUTBEWERKING                10
                                                               GR12 0625

3.5   FIGUUR 3.5 hieronder toon die vloerplan van ŉ gebou met ŉ geweldak.
      Bestudeer die figuur en beantwoord die vrae wat volg. Toon ALLE berekeninge.

                                        FIGUUR 3.5

      Gebruik die volgende spesifikasies:

             Die mure is 220 mm dik.
             Die lengte van die dakspar is 3 600 mm.
             Die hartafstand spasieëring tussen kaplatte is 900 mm.
             Die oorhang van die dak by die fassieplankente is 150 mm.
      Gebruik ANTWOORDBLAD 3.5 en bereken die volgende:

      3.5.1    Die binne-afmetings                                                         (2)

      3.5.2    Die lengte van die muurplate                                                (3)

      3.5.3    Die aantal kaplatte benodig                                                 (3)

      3.5.4    Die oppervlakte van dakonderlegsel benodig                               (4)
                                                                                       [30]

                                                                            Blaai om asseblief

### Page 20

CIVIL TECHNOLOGY: WOODWORKING                           11
                                                              GR12 0625

QUESTION 4: CASEMENTS, DOORS AND WALL-PANELLING

Start this question on a NEW page.

4.1   Give ONE word/term for each of the following descriptions by choosing a
      word/term from the list below. Write only the word/term next to the question
      numbers (4.1.1 to 4.1.5) in the ANSWER BOOK, e.g. 4.1.6 paint.

             cornice; quadrant; window sill; mullion; glazing bar; front rail;
       mortice and tenon; tongue and groove boards; putty; skirting; glue; PVC;
                            capping; paint; top rail; varnish

      4.1.1   The moulding between the wall and the floor                                         (1)

      4.1.2   The member that separates the main parts of a double casement
              vertically                                                                          (1)

      4.1.3   Used to keep the windowpane in place                                                (1)

      4.1.4   The joint used to join the strip boards used in wall panels                         (1)

      4.1.5   The horizontal member of the casement locatred directly below the
              transom                                                                             (1)

4.2   Name the THREE main parts of a double casement with fanlights.                              (3)

                                                                                     Please turn over

### Page 21

SIVIELE TEGNOLOGIE: HOUTBEWERKING                     11
                                                              GR12 0625

VRAAG 4: SWAAIRAME, DEURE EN MUURPANELE

Begin hierdie vraag op ŉ NUWE bladsy.

4.1   Gee EEN woord/term vir elk van die volgende beskrywings deur ŉ woord/term
      uit die lys hieronder te kies. Skryf slegs die woord/term langs die vraagnommers
      (4.1.1 tot 4.1.5) in die ANTWOORDBOEK neer, bv. 4.1.6 vloerlys.

          kroonlys, kwartrondte, vensterbank, tussenstyl, ruitbalkie, voorste reling,
       tap-en-gat, tong-en-groefborde, stopverf, vloerlys, gom, PVC, dekstrook, verf,
                                      bo-reling, vernis

      4.1.1   Die lys tussen die muur en die vloer.                                            (1)

      4.1.2   Die onderdeel wat die hoofdele van ŉ dubbelswaairaam vertikaal
              verdeel                                                                          (1)

      4.1.3   Word gebruik om die vensterruit in posisie te hou                                (1)

      4.1.4   Die voeg wat gebruik word om die strookplanke wat by die muurpanele
              gebruik word te heg                                                              (1)

      4.1.5   Die horisontale onderdeel van die swaairaam wat direk onder die
              kalfreling voorkom                                                               (1)

4.2   Noem die DRIE hoofdele van ŉ dubbelswaairaam met boligte.                                (3)

                                                                                Blaai om asseblief

### Page 22

CIVIL TECHNOLOGY: WOODWORKING                          12
                                                             GR12 0625

4.3   FIGURE 4.3 below shows an external elevation of an incomplete casement. The
      casement can be extended by placing a new part on top of the existing one.
      Study the figure and answer the questions that follow.

                                      FIGURE 4.3

      4.3.1   Name the missing part that can be placed on top of the casement to
              complete it.                                                                      (1)

      4.3.2   Explain ONE advantage of the part that can be placed on top of the
              casement.                                                                         (1)

      4.3.3   Describe the purpose of a transom in a casement.                                  (1)

      4.3.4   Name TWO parts of a swing frame that keeps the glass in place.                    (2)

                                                                                   Please turn over

### Page 23

SIVIELE TEGNOLOGIE: HOUTBEWERKING                 12
                                                              GR12 0625

4.3   FIGUUR 4.3 hieronder toon ŉ buite-aansig van ŉ onvoltooide swaairaam. Die
      swaairaam kan veleng word deur ŉ nuwe deel bo-op die bestaande swaairaam
      te plaas. Bestudeer die figuur en beantwoord die vrae wat volg.

                                       FIGUUR 4.3

      4.3.1   Noem die ontbrekende deel wat bo-op die swaairaam geplaas kan word
              om dit te voltooi.                                                           (1)

      4.3.2   Verduidelik EEN voordeel van die deel wat bo-op die swaairaam geplaas
              kan word.                                                                    (1)

      4.3.3   Beskryf die doel van ŉ kalfreling in ŉ swaairaam.                            (1)

      4.3.4   Noem TWEE dele van ŉ swaairaam wat die glas in plek hou.                     (2)

                                                                            Blaai om asseblief

### Page 24

CIVIL TECHNOLOGY: WOODWORKING                        13
                                                             GR12 0625

4.4   FIGURE 4.4 below depicts a vertical section through the transom, bottom rail of
      a fanlight and top rail of a casement.

                                        FIGURE 4.4

      4.4.1   Identify the members A – E.                                                     (5)

      4.4.2   Describe the purpose of part B.                                                 (1)

                                                                                 Please turn over

### Page 25

SIVIELE TEGNOLOGIE: HOUTBEWERKING                    13
                                                               GR12 0625

4.4   FIGUUR 4.4 hieronder toon ŉ vertikale snit deur die kalfreling, onderreling van
      die bolig en boreling van ŉ swaairaam.

                                         FIGUUR 4.4

      4.4.1   Identifiseer dele A – E.                                                         (5)

      4.4.2   Beskryf die doel van onderdeel B.                                                (1)

                                                                                Blaai om asseblief

### Page 26

CIVIL TECHNOLOGY: WOODWORKING                      14
                                                                GR12 0625

4.5   FIGURE 4.5 below shows a vertical section through the bottom of a panelled
      door. Study the drawing and answer the questions that follow.

                                           FIGURE 4.5

      4.5.1   Label parts A ̶ C.                                                               (3)

      4.5.2   Explain ONE purpose of part C.                                                   (1)

      4.5.3   State the thickness of part A.                                                   (1)

      4.5.4   Identify the joint used to join part A to the stile of a door.                   (2)

      4.5.5   Make a neat, freehand sketch of the front and top view of a raised panel.        (3)

                                                                                  Please turn over

### Page 27

SIVIELE TEGNOLOGIE: HOUTBEWERKING                      14
                                                              GR12 0625

4.5   Figuur 4.5 hieronder toon ŉ vertikale snit deur die onderkant van ŉ paneeldeur.
      Bestudeer die skets en beantwoord die vrae wat volg.

                                        FIGUUR 4.5

      4.5.1   Benoem onderdele A – C.                                                           (3)

      4.5.2   Verduidelik EEN doel van deel C.                                                  (1)

      4.5.3   Benoem die dikte van deel A.                                                      (1)

      4.5.4   Identifiseer die hegging wat gebruik is om deel A aan die styl van die
              deur te verbind.                                                                  (2)

      4.5.5   Maak ŉ netjiese vryhandskets van ŉ voor- en bo-aansig van ŉ verhewe
              paneel.                                                                           (3)

                                                                                 Blaai om asseblief

### Page 28

CIVIL TECHNOLOGY: WOODWORKING                          15
                                                             GR12 0625

4.6   FIGURE 4.6 below shows a vertical sectional view through the top of a wall
      panel.

                                        FIGURE 4.6

      4.6.1   Identify the members labelled A ̶ D.                                              (4)

      4.6.2   Describe the purposes of members C and D, respectively.                           (2)

      4.6.3   Explain why the length of the tongue is shorter than the depth of the
              groove.                                                                           (2)

                                                                                   Please turn over

### Page 29

SIVIELE TEGNOLOGIE: HOUTBEWERKING                     15
                                                              GR12 0625

4.6   FIGUUR 4.6 hieronder toon ŉ vertikale deursnee-aansig deur die bokant van ŉ
      muurpaneel.

                                        FIGUUR 4.6

      4.6.1   Identifiseer die dele gemerk A ̶ D.                                              (4)

      4.6.2   Beskryf die doele van dele C en D, onderskeidelik.                               (2)

      4.6.3   Verduidelik hoekom die lengte van die tong korter is as die diepte van
              die groef.                                                                       (2)

                                                                                Blaai om asseblief

### Page 30

CIVIL TECHNOLOGY: WOODWORKING                         16
                                                                   GR12 0625

    4.7   Figure 4.7 below shows a joint used in a three-panel door.

                                              FIGURE 4.7

          Predict the ratio of the thickness of part C.                                              (1)

    4.8   Describe what you understand by the term muntin in a door.                              (2)
                                                                                                 [40]

    QUESTION 5: ROOFS, CEILINGS, TOOLS, EQUIPMENT AND MATERIALS
                (SPECIFIC)

    Start this question on a NEW page.

    5.1   FIGURE 5.1 below shows an electrical hand tool. Study the picture and answer
          the questions that follow.

                                              FIGURE 5.1

          5.1.1   Identify the tool.                                                                 (1)

          5.1.2   Predict what could happen if no personal safety equipment is worn while
                  using this tool.                                                                   (2)

          5.1.3   Briefly explain why this hand tool should be stored in a safe, dry place.          (1)
,

                                                                                        Please turn over

### Page 31

SIVIELE TEGNOLOGIE: HOUTBEWERKING                     16
                                                              GR12 0625

4.7   FIGUUR 4.7 hieronder toon ŉ voeg wat in ŉ driepaneeldeur gebruik word.

                                        FIGUUR 4.7

      Voorspel die verhouding van die in dikte van deel C.                                     (1)

4.8   Beskryf wat jy verstaan onder die term muntin in ŉ deur.                              (2)
                                                                                           [40]

VRAAG 5: DAKKE, PLAFONNE, GEREEDSKAP EN MATERIAAL (SPESIFIEK)

Begin hierdiedie vraag op ŉ NUWE bladsy.

5.1   FIGUUR 5.1 hieronder toon ŉ elektriese handgereedskapstuk. Bestudeer die
      prent en beantwooord die vrae wat volg.

                                        FIGUUR 5.1

      5.1.1   Identifiseer die gereedskapstuk.                                                 (1)

      5.1.2   Voorspel wat kan gebeur as geen persoonlike beskermende toerusting
              gedra word terwyl hierdie gereeddskap gebruik word nie.                          (2)

      5.1.3   Verduidelik kortliks hoekom hierdie gereedskapstuk in ’n velige, droë
              plek gebȇre moet word.                                                           (1)

                                                                                Blaai om asseblief

### Page 32

CIVIL TECHNOLOGY: WOODWORKING                      17
                                                              GR12 0625

5.2   FIGURE 5.2 below shows a woodworking machine. Study the picture and
      answer the questions that follow.

                                        FIGURE 5.2

      5.2.1   Identify the woodworking machine.                                              (1)

      5.2.2   Give TWO reasons why you should not adjust the height of the machine
              while it is operating.                                                         (2)

      5.2.3   Explain TWO precautionary methods that can be taken to protect the
              blade of the machine.                                                          (2)

      5.2.4   Explain TWO reasons why it is necessary to check the timber for loose
              knots and nails before using this machine.                                     (2)

5.3   Name TWO different types of trapdoors that can be fitted to a ceiling.                 (2)

5.4   Differentiate between the uses of a purlin and a batten.                               (2)

5.5   Name the appropriate roof underlays for EACH of the following roofs:

      5.5.1   Tiled roof                                                                     (1)

      5.5.2   Thatch roof                                                                    (1)

      5.5.3   IBR roof sheeting                                                              (1)

                                                                                Please turn over

### Page 33

SIVIELE TEGNOLOGIE: HOUTBEWERKING                  17
                                                               GR12 0625

5.2   FIGUUR 5.2 hieronder toon ŉ houtwerkmasjien. Bestudeer die prent en
      beantwoord die vrae wat volg.

                                        FIGUUR 5.2

      5.2.1   Identifiseer die houtwerkmasjien.                                              (1)

      5.2.2   Gee TWEE redes waarom jy nie die hoogte van die masjien moet
              verstel terwyl dit werk nie.                                                   (2)

      5.2.3   Verduidelik TWEE vorgsorgmaatreës wat geneem kan word om die lem
              van die masjien te beskerm.                                                    (2)

      5.2.4   Gee TWEE redes hoekom dit nodig is om die hout vir los knope en
              spykers na te gaan voordat hierdie masjien gebruik word.                       (2)

5.3   Noem TWEE verskillende tipes valdeure wat op ŉ plafon geȉnstalleer kan word.           (2)

5.4   Onderskei tussen die gebruike van ’n kaplat (daklat) en ’n plafonlat.                  (2)

5.5   Noem die verskillende dakonderlaag vir ELK van die volgende dakbedekkings:

      5.5.1   Teëldak                                                                        (1)

      5.5.2   Grasdak                                                                        (1)

      5.5.3   IBR-dakbedekking                                                               (1)

                                                                              Blaai om asseblief

### Page 34

CIVIL TECHNOLOGY: WOODWORKING                        18
                                                              GR12 0625

5.6   Use ANSWERSHEET 5.6 and complete the vertical section through the foot of a
      roof truss by drawing the closed eave to scale 1 : 10.

      Show the following on your drawing:

         Facia board: 230 mm x 38 mm
         Hanger: 38 mm x 38 mm
         Bearer: 38 mm x 38 mm
         6 mm fibre cement board
         TWO quarter round mouldings below the fibre cement board                             (7)

5.7   Explain the term eaves of a roof.                                                        (1)

5.8   List TWO different roof trusses used to build a roof.                                    (2)

5.9   Differentiate between open and closed eaves                                           (2)
                                                                                           [30]

QUESTION 6: GRAPHICS AS MEANS OF COMMUNICATION (SPECIFIC)

Start this question on a NEW page.

6.1   ANSWER SHEET 6.1 shows the front view of a freestanding cupboard, with an
      oval hanging rail and a drawer, without a door.

      Project the detail of the freestanding cupboard and draw a sectional left view on
      cutting plane A-A.

      Use the following specifications:

          The cupboard is made of 16 mm melamine.
          The drawer bottom is made of 3 mm hardboard.
          The cupboard back is made of 3 mm hardboard.                                    (12)

6.2   Draw, in your ANSWER BOOK, a neat two-dimensional sketch of the vertical
      sectional view of ONE half of the CORRECT constructional detail of the
      conventional trap door. Label any TWO parts.                                             (8)

6.3   Differentiate, by means of TWO line diagrams, between a king post roof truss
      and a SA(Howe) roof truss. Draw ONLY the trusses with overhangs in your
      ANSWER BOOK.                                                                         (12)

6.4   Sketch in your ANSWER BOOK, in good proportion, the isometric view of ONLY
      the top rail with the tenon for a haunched mortice-and-tenon joint.                   (8)
                                                                                           [40]

                                                                               TOTAL:      200

                                                                                           END

### Page 35

SIVIELE TEGNOLOGIE: HOUTBEWERKING                 18
                                                              GR12 0625

5.6   Gebruik ANTWOORDBLAD 5.6 en voltooi die vertikale deursneeaansig deur die
      voet van ŉ dakkap deur die geslote dakrand volgens skaal 1 : 10 te teken.

      Toon die volgende op jou skets:

         Fassieplank: 230 mm x 38 mm
         Hanger: 38 mm x 38 mm
         Draer: 38 mm x 38 mm
         6 mm veselsementbordfibre
         TWEE kwartrondlyste onder die veselsementbord                                    (7)

5.7   Verduidelik die term dakrand van ŉ dak.                                              (1)

5.8   Noem TWEE verskillende dakkappe wat gebruik word om ‘n dak te bou.                   (2)

5.9   Onderskei tussen oop en geslote dakrande.                                         (2)
                                                                                       [30]

VRAAG 6: GRAFIKA AS KOMUNIKASIEMIDDEL (SPESIFIEK)

Begin hierdie vraag op ŉ NUWE bladsy.

6.1   ANTWOORDBLAD 6.1 toon die vooraansig van ŉ vrystaande kas, met ŉ ovaal
      hangreling en ŉ laai, sonder ŉ deur.

      Projekteer die detail van die vrystaande kas en teken ŉ deursnee-linkeraansig
      op snyvlak A-A.

      Gebruik die volgende spesifikasies:

          Die kas is van 16 mm melamienborde gemaak.
          Die onderkant van die laai is van 3 mm hardebord gemaak.
          Die agterkant van die kas is van 3 mm hardebord gemaak.                     (12)

6.2   Teken, in jou ANTWOORDBOEK, ŉ netjiese tweedimensionele skets van die
      vertikale deursnee-aansig van EEN helfte van die KORREKTE
      konstruksiebesonderhede van die konvensionele valdeur. Benoem enige TWEE
      onderdele.                                                                           (8)

6.3   Onderskei, met behulp van TWEE lyndiagramme, tussen ŉ hoofstyldakkap en ŉ
      SA(Howe)-dakkap. Teken SLEGS die dakkappe met oorhange in jou
      ANTWOORDBOEK.                                                                    (12)

6.4   Skets in jou ANTWOORDBOEK, in goeie verhouding, die isometriese aansig
      van SLEGS die bo-reling met die tap vir ŉ borstapvoeg.                            (8)
                                                                                       [40]

                                                                           TOTAAL:     200

                                                                                      EINDE

### Page 36

CIVIL TECHNOLOGY: WOODWORKING           1
                                                               GR12 0625

NAME AND SURNAME:

ANSWWER SHEET 2

NO.                  QUESTION                               ANSWER      MARKS

       Name the drawing depicted in
 2.1                                                                         1
       FIGURE B.

 2.2   Deduce the scale of the drawing.                                      1

 2.3   Identify number 4.                                                    1

 2.4   Identify number 12.                                                   1

 2.5   Identify number 11.                                                   1

 2.6   Identify number 8.                                                    1

 2.7   Identify number 7.                                                    1

 2.8   Identify number 14.                                                   1

 2.9   Identify number 5.                                                    1

       Identify the number that indicates the
2.10                                                                         1
       ELECTRICITY METER in FIGURE B.

     Recommend TWO suitable scales for
2.11 floor plans other than the one listed in                                2
     the notes.

                                                   2.12.1
       Give the abbreviations for the following:
2.12                                               2.12.2                    2
       2.12.1 Water closet
       2.12.2 Bath

     Name the feature that must be placed
2.13 in front of the sliding door as specified                               1
     in the notes.

2.14 Who checked the drawing?                                                1

                                                                      Please turn over

### Page 37

SIVIELE TEGNOLOGIE: HOUTBEWERKING         1
                                                                  GR12 0625

 NAAM EN VAN:

ANTWOORDBLAD 2

NR.                  VRAE                           ANTWOORDE                 PUNTE

       Benoem die tekening uitgebeeld
2.1                                                                               1
       in FIGUUR B.

2.2    Lei die skaal van die tekening af.                                         1

2.3    Identifiseer nommer 4.                                                     1

2.4    Identifiseer nommer 12.                                                    1

2.5    Identifiseer nommer 11.                                                    1

2.6    Identifiseer nommer 8.                                                     1

2.7    Identifiseer nommer 7.                                                     1

2.8    Identifiseer nommer 14.                                                    1

2.9    Identifiseer nommer 5.                                                     1

     Identifiseer die nommer wat die
2.10 elektisiteitsmeter in FIGUUR A                                               1
     aantoon.

     Beveel TWEE geskikte skale aan
2.11 vir vloerplanne anders as dié wat                                            2
     in die aantekeinge getoon word.
                                            12.1
       Gee die afkortings vir die
       volgende:
2.12                                                                              2
       12.1   Spoelkloset                   12.2
       12.2   Stort

     Noem die eienskap wat voor die
     skuifdeur geplaas moet word
2.13                                                                              1
     soos in die aantekeninge
     gespesifiseer.

2.14 Wie het die tekening nagegaan?                                               1

                                                                        Blaai om asseblief

### Page 38

CIVIL TECHNOLOGY: WOODWORKING           2
                                                                GR12 0625

NAME AND SURNAME:

       Describe what is indicated by
2.15                                                                          1
       number 3.

       Differentiate between the light installed
2.16                                                                          2
       in the lounge and that in the office.

       Provide the drawing number from the
2.17                                                                          1
       building plan.

     Who must be notified when a
2.18 contractor sets out levels on a site and                                 1
     there are variances?

       Identify ONE important feature that is
2.19                                                                          1
       omitted from the plan.

     What should be installed for balancing
2.20 and support as you go up the                                             1
     staircase?

       Deduce the height of window 2 from
2.21                                                                          1
       the window schedule.

2.22 Draw the symbol for a shower.                                            1

       Draw the electrical symbol for a wall
2.23                                                                          2
       mounted light.

       Deduce the width of window 3 from the
2.24                                                                          1
       window schedule.

                                                                       Please turn over

### Page 39

SIVIELE TEGNOLOGIE: HOUTBEWERKING         2
                                                                   GR12 0625

 NAAM EN VAN:

2.15 Beskryf wat deur nommer 3                                                     1
     getoon word.

     Verduidelik die verskil tussen die
2.16 lig wat in die sitkamer en in die                                             2
     kombuis geȉnstalleer is.

2.17 Wat is die tekeningnommer van                                                 1
     die bouplan?

     Wie moet ingelig word wanneer
2.18 die kontrakteur die vlakke                                                    1
     uiteensit op ‘n bouterrein opstel
     en daar variansies is?

     Identifiseer EEN belangrike
2.19 aspek wat is op die plan                                                      1
     weggelaat is.

     Wat moet geïnstalleer word vir
2.20 balans en ondersteuning as jy die                                             1
     trappe opgaan?

2.21 Lei die hoogte van venster 2 af uit                                           1
     die venster-skedule.

2.22 Teken die simbool vir ŉ stort.                                                1

2.23 Teken die elektriese simbool vir ŉ                                            1
     muur-gemonteerde lig.

       Lei die wydte van venster 3 uit
2.24                                                                               1
       die venster-skedule af.

                                                                         Blaai om asseblief

### Page 40

CIVIL TECHNOLOGY: WOODWORKING              3
                                                                 GR12 0625

NAME AND SURNAME:

       Recommend a suitable floor covering
2.25                                                                              1
       for the bathroom.

       Explain what is meant by 1:10, as
2.26                                                                              1
       indicated on the symbol in the notes.

       Identify the type of roof that is used
2.27                                                                              1
       for the building in FIGURE A.

     Prove, by means of a control test, that
     the total vertical dimensions on the
2.28                                                                              6
     left and right of the plan in FIGURE B
     are equal.

     Calculate the area of the bathroom.
     Show ALL calculations. Give your
2.29                                                                              3
     answer in m². Round-off your answer
     to TWO decimal places.

                                                                  TOTAL:         40

                                                                           Please turn over

### Page 41

SIVIELE TEGNOLOGIE: HOUTBEWERKING         3
                                                                 GR12 0625

 NAAM EN VAN:

2.25 Beveel ŉ geskikte vloerbedekking                                            1
     vir die badkamer aan.

       Verduidelik wat bedoel word met
2.26                                                                             1
       1 : 10 soos aangedui op die
       simbool in die aantekeninge.

     Identifiseer die tipe dak wat vir
2.27 die gebou in FIGUUR A gebruik                                               1
     word.

     Bewys, deur ŉ kontroletoets te
     doen, dat die totale vertikale
2.28 afmetings aan die linkerkant en                                             7
     regterkant van die plan in
     FIGUUR B gelyk is.

     Bereken die area van die
     badkamer. Toon ALLE
2.29 berekeninge en gee jou antwoord                                             3
     in m². Rond jou antwoord af na
     TWEE desimale plekke.

                                                                 TOTAAL:        40

                                                                       Blaai om asseblief

### Page 42

CIVIL TECHNOLOGY: WOODWORKING                 4
                                                       GR12 0625

NAME AND SURNAME:

ANSWER SHEET 3.5

  A       B        C                             D
3.5.1                       Internal measurements:
                            =__________________________________
                            =__________________________________
                                                                      (2)
3.5.2                       Length of wall plates needed:
_____   ______ __________

                                                                      (3)
3.5.3                       Number of purlins needed:
                            =
                            ____________________________________
                            =
                            ____________________________________
                            =__________________________________
                                                                      (3)
3.5.4                       Area of roof underlay needed:
_____   ______
        ______ __________

                                                                      (4)

                                                                   Please turn over

Text truncated here. Open the document page to read the rest.

## Related documents

- [Civil Technology (Woodworking) (Afrikaans) June 2025 Possible Answers](https://www.hlayiso.com/library/civil-technology-woodworking-afrikaans-june-2025-possible-answers/c0a65d19-28ca-4ac3-8c61-d4627d2a3133) — Civil Technology · Memo · 2025 · Afr
- [CIV TECH GR12 QP SEPT 2023 Construction Afrikaans](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept-2023-construction-afrikaans/97f8938d-02eb-46a4-a681-ef07b440e38f) — Civil Technology · QP · 2023 · Afr
- [CIV TECH GR12 QP SEPT2023 Civil Afrikaans](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2023-civil-afrikaans/3d971330-fbba-4185-b58b-8e57fbcde1cc) — Civil Technology · QP · 2023 · Afr
- [CIV TECH GR12 QP SEPT2023 Woodworking Afrikaans](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2023-woodworking-afrikaans/3e001b9e-95a3-4e0c-ad76-9bcfe29c6fff) — Civil Technology · QP · 2023 · Afr
- [CIV TECH GR12 QP SEPT2022 Woodworking Afrikaans](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2022-woodworking-afrikaans/c4790570-dabd-463c-94fa-aa1715b1a542) — Civil Technology · QP · 2022 · Afr
- [CIV TECH GR12 QP SEPT2021 Afrikaans Construction](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2021-afrikaans-construction/19e5865a-d8a9-4741-b562-b0158255fd68) — Civil Technology · QP · 2021 · Afr

## More from Grade 12 Civil Technology

- [Civil Technology Nov 2025 (Construction) MG Eng](https://www.hlayiso.com/library/grade-12-civil-technology-2025-nsc-november-exam-memorandum/0e265899-dc44-4809-aabf-8f374f1af392) — Memo · 2025 · Eng
- [CIV TECH GR12 MEMO SEPT2024 Construction Afrikaans](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-construction-afrikaans/162bcc65-80ad-4384-b293-36da22468b06) — Memo · 2024 · Afr
- [Civil Technology Nov 2022 (Civil Services) MG Afr](https://www.hlayiso.com/library/civil-technology-nov-2022-civil-services-mg-afr/42b5315c-825c-40e3-b394-85e0253fc0fb) — Memo · 2023 · Afr
- [Civil Technology Nov 2023 (Construction) Eng](https://www.hlayiso.com/library/civil-technology-nov-2023-construction-eng/e6743728-8140-42ae-838d-282654a975a5) — QP · 2023 · Eng
- [Civil Technology Nov 2023 (Civil Services) Afr](https://www.hlayiso.com/library/civil-technology-nov-2023-civil-services-afr/b820ac91-947c-4aed-821f-256aa13aabe1) — QP · 2023 · Afr
- [Civil Technology Nov 2023 (Woodworking) Afr](https://www.hlayiso.com/library/civil-technology-nov-2023-woodworking-afr/f6f7ac38-fb55-4d61-bc66-5441e4cbcee0) — QP · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
