# Design Grade 12 P2 NSC November 2018 Question Paper (Eng)

> Grade 12 Design Paper 2 question paper from the NSC November Exam 2018 (English), 23 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/design-p2-nov-2018-eng/b58900a6-4981-498f-b576-e1e45d42bc96
- Updated: 2026-09-27
- Subject: Design
- Grade: Grade 12
- Document type: Question paper
- Year: 2018
- Exam period: NSC November Exam
- Paper: 2
- Curriculum: CAPS
- Pages: 23

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Design](https://www.hlayiso.com/library/grade-12/design) › [Design Grade 12 P2 NSC November 2018 Question Paper (Eng)](https://www.hlayiso.com/library/design-p2-nov-2018-eng/b58900a6-4981-498f-b576-e1e45d42bc96)

## About this document

Design · Grade 12 · NSC November Exam · 2018. Question paper, 23 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                                   NATIONAL
                              SENIOR CERTIFICATE

                                      GRADE 12

                                     DESIGN P2

                                    (PRACTICAL)

                            20 JULY–19 OCTOBER 2018

MARKS: 100

TIME: TOPIC 1:        Practical process/preparation at school and/or at home during
                      the 3rd term [50]
         TOPIC 2:     Practical product done under controlled conditions ONLY at
                      school: a minimum of 12 hours and a maximum of 24 hours after
                      TOPIC 1 has been completed [50]

              This question paper consists of 22 pages and 1 addendum.
                  This question paper must be printed in full colour.

Copyright reserved                                                    Please turn over

### Page 2

Downloaded from hlayiso.com
Design/P2                                     2                         DBE/November 2018
                                             NSC

INSTRUCTIONS AND INFORMATION

1.          This question paper consists of TWO sections:

            TOPIC 1:   The examination sourcebook/workbook       (50 marks)
            TOPIC 2:   The final practical examination product   (50 marks)

            TOTAL: 100 marks

2.          The question paper has TWO briefs/themes. Choose ONE or COMBINE
            THE TWO OPTIONS.

Copyright reserved                                                            Please turn over

### Page 3

Downloaded from hlayiso.com
Design/P2                         3           DBE/November 2018
                                 NSC

BRIEF/THEME 1: PLANET EARTH

         PLANET EARTH

Copyright reserved                                 Please turn over

### Page 4

Downloaded from hlayiso.com
Design/P2                                    4                            DBE/November 2018
                                            NSC

            The one thing we all share is PLANET EARTH. – Wendell Berry

We are greeted by Mother Earth's unique and magnificent beauty every day.

The planet Earth no longer appears as a mysterious and unexplored system. Over
millions of years humanity has slowly exploited and plundered the planet of its natural
resources. Much of our planet now suffers from a wide range of environmental issues.

The rapid rate of change on the planet Earth is forcing us to take a new look at the
world and our place within it. The millennials (children born in the early 2000s) of today
yearn for a pre-industrial, pre-technological world.

Key issues need to be addressed urgently.

We need to help the next generation of scientists, biologists and designers to find
solutions to the issues confronting our planet.

Copyright reserved                                                            Please turn over

### Page 5

Downloaded from hlayiso.com
Design/P2                                  5                          DBE/November 2018
                                          NSC

The illustrations above emphasise man in partnership with the planet rather than being
in charge. Humankind should respect their place in this symbiotic, biodiverse
ecosystem so that it remains habitable for future humanity.

Stephan Hawking, world-renowned theoretical physicist, believed the following:

Within the next thousand years or so, man will make the planet Earth uninhabitable
and in a billion years from now the Earth will be a very hot, dry and uninhabitable
planet. One way or another, our planet will likely become uninhabitable for mankind in
the future. We need to start thinking seriously about how we will free ourselves from
the constraints of this dying planet.

Copyright reserved                                                        Please turn over

### Page 6

Downloaded from hlayiso.com
Design/P2                                   6                           DBE/November 2018
                                           NSC

THE BRIEF/THEME:

Create an original environmental and/or social design solution based on PLANET
EARTH that creates an awareness of the vulnerable beauty that surrounds us.

Use one or more of the design categories below for your design solution.

•   VISUAL COMMUNICATION/INFORMATION DESIGN AND/OR DIGITAL DESIGN

    Create awareness of our efforts to save/destroy the planet Earth. Use a billboard,
    poster, website design, brochure, sticker, book illustration, animation, packaging
    design, graffiti, etc.

•   SURFACE DESIGN AND TWO-DIMENSIONAL CRAFT DESIGN

    Interpret the theme Planet Earth by focusing on inside and outside surfaces, such
    as upholstery, mosaic designs, wallpaper, carpets and wall finishes. Your design
    solutions should focus on creating an awareness of the vulnerable beauty that
    surrounds us.

•   PRODUCT DESIGN AND THREE-DIMENSIONAL CRAFT DESIGN

    Products should be designed to inform people about sustainability and the use of
    environmentally friendly materials: lights, chairs, shelving, cushions, shoes,
    furniture, crockery, jewellery, clothing, etc. They can also be a celebration of the
    beauty of the Earth.

•   ENVIRONMENTAL DESIGN

    To help the next generation of scientists and biologists restore the world, we need
    to reduce our carbon footprint and create designs that do not pollute or negatively
    affect the ecosystem or our health. For example, design an eco-friendly
    environmental model that deals with health: a hospital, a retreat; education: an
    eco-school; interactive museum and/or green architectural spaces: a green wall or
    turf-roof building, penthouse gardens, etc.

DO NOT copy the examples provided.

Copyright reserved                                                          Please turn over

### Page 7

Downloaded from hlayiso.com
Design/P2                         7                 DBE/November 2018
                                 NSC

VISUAL COMMUNICATION/INFORMATION DESIGN AND/OR DIGITAL DESIGN

Copyright reserved                                     Please turn over

### Page 8

Downloaded from hlayiso.com
Design/P2                         8               DBE/November 2018
                                 NSC

SURFACE DESIGN AND TWO-DIMENSIONAL CRAFT DESIGN

Copyright reserved                                   Please turn over

### Page 9

Downloaded from hlayiso.com
Design/P2                         9                 DBE/November 2018
                                 NSC

PRODUCT DESIGN AND THREE-DIMENSIONAL CRAFT DESIGN

Copyright reserved                                     Please turn over

### Page 10

Downloaded from hlayiso.com
Design/P2                         10          DBE/November 2018
                                 NSC

ENVIRONMENTAL DESIGN

Copyright reserved                                 Please turn over

### Page 11

Downloaded from hlayiso.com
Design/P2                            11           DBE/November 2018
                                    NSC

BRIEF/THEME 2: UNCONVENTIONAL DESIGN

  UN                        UN
    CONVENTIONAL
     DESIGN  UN DESIGN
CONVENTIONAL DESIGN
   UN CONVENTIONAL
DESIGN UN CONVENTIONAL DESIGN UN
UN CONVENTIONAL DESIGN
                 UN CONVENTIONAL                  DESIGN
UN                         CONVENTIONAL DESIGN         UN
CONVENTIONAL DESIGN

UN CONVENTIONAL DESIGN        UN CONVENTIONAL
DESIGN                UN     UN CONVENTIONAL
DESIGN UN CONVENTIONAL DESIGN                     UNCON

    UN CON            VENTIONAL DESIGN                          UN
CON                  VENTIONAL DESIGN UN CONVENTIONAL

VENTIONAL                     UN CONVENTIONAL   DESIGN
Copyright reserved                                   Please turn over

### Page 12

Downloaded from hlayiso.com
Design/P2                                 12                         DBE/November 2018
                                         NSC

Restraints caused by the economic recession and environmental crisis have
contributed to the rethinking of design, design products and processes. Perhaps now,
at a time of deep economic anxiety and trouble, we should embrace
UNCONVENTIONAL DESIGN trends as they bring life, creativity, entrepreneurship
and beauty through the use of alternative, unconventional materials.

From a business perspective the use of unconventional, recyclable and upcycled
materials and construction methods can produce possibilities to create and develop
new, innovative, exciting design products and offer more entrepreneurial
opportunities.

Copyright reserved                                                       Please turn over

### Page 13

Downloaded from hlayiso.com
Design/P2                                  13                         DBE/November 2018
                                          NSC

Unconventional design encourages recycling and upcycling, which are common
creative solutions used in impoverished areas.

Note the innovative use of cardboard boxes, plastic crates, plastic and glass bottles,
and wooden pallets in the images below.

Copyright reserved                                                        Please turn over

### Page 14

Downloaded from hlayiso.com
Design/P2                                   14                         DBE/November 2018
                                           NSC

THE BRIEF/THEME:

Create a design in one or more of the design categories below that interpret the theme
UNCONVENTIONAL DESIGN in an original and creative manner.

Use one or more of the design categories below for your design solution.

•   VISUAL COMMUNICATION/INFORMATION DESIGN AND/OR DIGITAL DESIGN

    The focus could be on the branding for an unconventional shop/business, e.g.
    a logo, letterhead, posters, website design, brochure and promotional items;
    unconventional or avant-garde ways of communicating a message through the use
    of original typography, innovative processes, materials and images in presenting
    creative design solutions.

•   SURFACE DESIGN AND TWO-DIMENSIONAL CRAFT DESIGN

    You can choose to create wallpaper, textiles, mosaics, upholstery, curtaining and
    cladding of floors, ceilings and walls with unconventional materials or techniques.

•   PRODUCT DESIGN AND THREE-DIMENSIONAL CRAFT DESIGN

    Design any unconventional product, e.g. unusual or eccentric cushions, lights,
    chairs, shelving, shoes, furniture, crockery, jewellery, lamps, clothing, handbags
    and accessories. Carefully consider your choice of materials.

•   ENVIRONMENTAL DESIGN

    You may consider creating an actual pop-up shop or display space. Think about
    the use of natural and/or artificial light to highlight your exhibition space and
    products. Be innovative with the use of materials, consider the use of recycled and
    upcycled materials, such as cardboard, plastic, tin, wooden pallets and second-
    hand shipping containers. Do not underestimate the creative possibilities of
    flat-packed cardboard boxes as building material. You can create a model for an
    unusual public space, e.g. a park, a piazza, an airport and waterfront.

DO NOT copy the examples provided.

Copyright reserved                                                         Please turn over

### Page 15

Downloaded from hlayiso.com
Design/P2                         15                DBE/November 2018
                                 NSC

VISUAL COMMUNICATION/INFORMATION DESIGN AND/OR DIGITAL DESIGN

Copyright reserved                                     Please turn over

### Page 16

Downloaded from hlayiso.com
Design/P2                         16              DBE/November 2018
                                 NSC

SURFACE DESIGN AND TWO-DIMENSIONAL CRAFT DESIGN

Copyright reserved                                   Please turn over

### Page 17

Downloaded from hlayiso.com
Design/P2                         17                DBE/November 2018
                                 NSC

PRODUCT DESIGN AND THREE-DIMENSIONAL CRAFT DESIGN

Copyright reserved                                     Please turn over

### Page 18

Downloaded from hlayiso.com
Design/P2                         18          DBE/November 2018
                                 NSC

ENVIRONMENTAL DESIGN

Copyright reserved                                 Please turn over

### Page 19

Downloaded from hlayiso.com
Design/P2                                       19                          DBE/November 2018
                                               NSC

REQUIREMENTS

SECTION A

TOPIC 1: THE DESIGN PROCESS [50]

1.          All processIpreparatory work for your design must be shown in a
            sourcebook/workbook.

2.          This will involve the processes from conceptualisation to realisation.

3.          Thorough investigation of problems posed by the design brief should be
            shown.

4.          The sourcebook/workbook must be presented in the form of an album (that is
            in book form).

5.          It must open easily and have pages that turn easily.

6.          The sourcebook/workbook must be made of a light material to facilitate
            transport where work is moderated at a central venue.

7.          Ensure that the sourcebook/workbook is presented professionally.

NOTE:

•    As TOPIC 1 (preparation) has the same mark allocation as TOPIC 2 (the final
     product), it should be given enough time to acknowledge its importance.
•    Your teacher may be involved in this preliminary preparatory session only
     (TOPIC 1).
•    You may work at home.

CRITERIA FOR THE DESIGN PROCESS (TOPIC 1)

You should present the following (refer to the NSC Design Examination Guidelines):

•    Expression of intention and rationale                                                         (10)
•    Evidence of research, experimentation and reflection                                          (10)
•    Evidence of detailed planning and presentation related to the final concept                   (30)
                                                                                                   [50]

Copyright reserved                                                              Please turn over

### Page 20

Downloaded from hlayiso.com
Design/P2                                   20                          DBE/November 2018
                                           NSC

SECTION B

TOPIC 2: THE FINAL PRODUCT [50]

Although it is recommended that a two-dimensional design should NOT be larger than
A2 in size, candidates' work is not restricted regarding size.

The size of a three-dimensional design will depend on the function of the object being
made. Take into account that the final product might have to be transported to a central
marking venue.

NOTE:

•   Your teacher may NOT assist you in any way during the final production of the
    design.
•   ALL work must be done under the teacher's and the appointed invigilator's
    supervision at your school.
•   Any form of direct copying/plagiarism or work that is not your original work will be
    strictly penalised.
•   A declaration of authenticity (ADDENDUM A) must be completed by yourself, the
    chief invigilator and the teacher.
•   Work must be done on a continuous basis, e.g. on three consecutive days under
    controlled circumstances.

CRITERIA FOR THE DESIGN PRODUCT (TOPIC 2)

You should use the following criteria (refer to the NSC Design Examination
Guidelines):

•   Creativity/Originality/Interpretation in terms of the concept and solutions that are
    relevant to the brief                                                                      (10)
•   Evidence of design involvement: the appropriate use of design elements and
    principles                                                                                 (10)
•   Technique/Craftsmanship/Method                                                             (10)
•   The design solution with evidence of at least 12 hours', but not more than
    24 hours' work under controlled circumstances                                              (10)
•   Professional presentation and functionality of the design solution                         (10)
                                                                                               [50]

                                                 TOTAL: TOPIC 1 (50) + TOPIC 2 (50)            100

Copyright reserved                                                          Please turn over

### Page 21

Downloaded from hlayiso.com
Design/P2                                   21                         DBE/November 2018
                                           NSC

INSTRUCTIONS TO THE TEACHER

PRACTICAL EXAMINATION TOPIC 1 (50 MARKS) AND TOPIC 2 (50 MARKS) –
TASK 7

1.      This practical examination consists of ONE question paper. This question paper
        comprises TWO parts: TOPIC 1 (the examination sourcebookIworkbook and
        TOPIC 2 (the final practical examination product).

2.      This practical question paper should be given to the candidates on Friday
        20 July 2018. The final submission date will be Friday 19 October 2018.

3.      TOPIC 1 (design process) has the same weighting as TOPIC 2 (the final
        product) and it should therefore be given enough time to acknowledge its
        importance.

4.      Consequently, candidates should have enough time to do their TOPIC 1 (design
        process). The teacher may only be involved in this preliminary preparatory
        session and NOT in TOPIC 2. Due to the preparatory nature of TOPIC 1,
        candidates are allowed to work at home.

5.      Candidates must use the TOPIC 1 sourcebookIworkbook as a point of reference
        during their TOPIC 2 examination. Both TOPIC 1 and TOPIC 2 examination
        work must be submitted to the teacher/invigilator immediately after the TOPIC 2
        examination has been completed.

6.      The teacher may NOT assist the candidate in any way during the final
        production of the design product (TOPIC 2).

7.      Any form of direct copying/plagiarism or work that is not the candidate's
        original work will be strictly penalised.

8.      TOPIC 2 must be done on a continuous basis during contact time, e.g. on three
        consecutive days under controlled circumstances.

9.      TOPIC 2 must be done at the candidate's examination centre, under the
        supervision of the teacher/invigilator. TOPIC 2 work may NOT be done at home.

10.     TOPIC 2 work must NOT be removed from the examination centre under any
        circumstances.

11.     Each province will determine the marking process of TOPIC 1 (sourcebookI
        workbook) and TOPIC 2 (final product). Schools will be notified by the provinces
        regarding the date, time and venue for the submission of work to the
        examination centres, where applicable.

12.     The examination TOPIC 1 should           be professionally presented       in   a
        sourcebookIworkbook in album format.

13.     The sourcebook/workbook and final product must be labelled neatly and clearly.

14.     ADDENDUM A must be completed in full and the school stamp should appear in
        the appropriate space. Attach ADDENDUM A securely to the final examination
        work (sourcebook/workbook and/or final product).
Copyright reserved                                                         Please turn over

### Page 22

Downloaded from hlayiso.com
Design/P2                                                             22                             DBE/November 2018
                                                                     NSC

ASSESSMENT GUIDELINES

                             OUTCOMES                            REQUIREMENTS                     WEIGHTING MARKS
                                                                                                      %

SOURCEBOOK/WORKBOOK
                               TOPIC 1                       Expression of intention and             10
                          The Design Process                          rationale

                          The candidate is able to
                       understand the design process
                                                               Evidence of research,                 10
                         from conceptualisation to
                                realisation.
                                                            experimentation and reflection                      50

                                                          Evidence of detailed planning and          30
                                                           presentation related to the final
                                                                      concept

                               TOPIC 2                    Creativity/Originality/Interpretation      10
                           Design Production                 in terms of the concept and
                                                            solutions that are relevant to
                      The candidate is able to produce                  the brief
                      and present a body of work in the
                      chosen discipline(s) which shows
                      an understanding of design skills
                         and production processes.        Evidence of design involvement:            10

THE FINAL PRODUCT
                                                           the appropriate use of design
                                                              elements and principles

                                                                                                                50
                                                          Technique/Craftsmanship/Method             10

                                                          The design solution with evidence          10
                                                          of at least 12 hours', but not more
                                                              than 24 hours' work under
                                                               controlled circumstances

                                                            Professional presentation and            10
                                                          functionality of the design solution

                                 TOTAL                                                                          100

NOTE:                    Teachers and markers must refer to the NSC Design Examination Guidelines
                         and the PAT Guidelines for detailed assessment criteria.

Copyright reserved

### Page 23

Downloaded from hlayiso.com
Design/P2                                                             DBE/November 2018
                                          NSC

ADDENDUM A

This addendum must be detached, copied, completed, signed and attached to the
final examination work (workbook/sourcebook and/or final product).

NOVEMBER 2018 SOURCEBOOK/WORKBOOK

1.      Name of subject        DESIGN
2.      Code of subject        DSGN

                            DECLARATION OF AUTHENTICITY
This work was done under supervision and without any help. This is to certify that all work
submitted is the original and own work of the candidate.

Centre number
Examination number
District/Circuit
                                       Signature and date                School stamp
Candidate
Principal
Chief Invigilator/Teacher

NOVEMBER 2018 FINAL PRODUCT

1.      Name of subject        DESIGN
2.      Code of subject        DSGN

                            DECLARATION OF AUTHENTICITY
This work was done under supervision and without any help. This is to certify that all work
submitted is the original and own work of the candidate.

Centre number
Examination number
District/Circuit
                                       Signature and date                School stamp
Candidate
Principal
Chief Invigilator/Teacher

Copyright reserved

## Related documents

- [Design P2 Nov 2018 Afr](https://www.hlayiso.com/library/design-p2-nov-2018-afr/8a201594-168b-42d0-961c-4e691d059a18) — Design · QP · 2018 · Afr
- [Design P1 Nov 2018 Afr](https://www.hlayiso.com/library/design-p1-nov-2018-afr/169b2964-39b3-4515-b57f-66898ced700e) — Design · QP · 2018 · Afr
- [Design P1 Nov 2018 Eng](https://www.hlayiso.com/library/design-p1-nov-2018-eng/0b1b788b-b2c9-49d9-8650-eb8fe7721c37) — Design · QP · 2018 · Eng
- [Design P2 Nov 2023 Afr](https://www.hlayiso.com/library/design-p2-nov-2023-afr/5cc4f4cc-3644-4b70-b21a-dbe6de6bd8f8) — Design · QP · 2023 · Afr
- [Design P2 Nov 2023 Eng](https://www.hlayiso.com/library/design-p2-nov-2023-eng/d2ba454b-0791-4d1a-b363-b39394810293) — Design · QP · 2023 · Eng
- [Design P2 Nov 2021 Afr](https://www.hlayiso.com/library/design-p2-nov-2021-afr/c7602bb4-9de0-4fcf-9f32-2de77bf6fc5f) — Design · QP · 2021 · Afr

## More from Grade 12 Design

- [Gr 12 Des ATP 2023-24](https://www.hlayiso.com/library/gr-12-des-atp-2023-24/0fd522c6-2d5a-4c5b-9e0b-06e7b199eb25) — ATP
- [Design P1 May-June 2025 MG Afr](https://www.hlayiso.com/library/design-p1-may-june-2025-mg-afr/ccc80683-987a-4611-994f-f9eff5587a50) — Memo · 2025 · Afr
- [Design P1 Nov 2025 MG Eng](https://www.hlayiso.com/library/grade-12-design-2025-nsc-november-exam-memorandum-paper-1/79defddf-f99d-45c8-840b-73877abd8f11) — Memo · 2025 · Eng
- [Design P1 Nov 2025 MG Afr](https://www.hlayiso.com/library/grade-12-design-2025-nsc-november-exam-memorandum-paper-1/a85d8220-5a26-4f17-990e-081cb336014f) — Memo · 2025 · Afr
- [Design P1 Nov 2025 MG Afr](https://www.hlayiso.com/library/grade-12-design-2025-nsc-november-exam-memorandum-paper-1-afrikaans/5cf24f22-37cf-4c83-99d1-522c23cb4496) — Memo · 2025 · Afr
- [Design P2 Nov 2024 Eng](https://www.hlayiso.com/library/design-p2-nov-2024-eng/e3c099fa-b074-4932-aa7e-cbc7e78a1e3e) — QP · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
