# Engineering Graphics and Design Grade 11 P2 2014 QP

> Grade 11 Engineering Graphics and Design Paper 2 question paper from the Eastern Cape November 2014, 6 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/egd-gr11-2014-p2/322e4b9f-00c2-4de6-a35a-69dbfdeef5ff
- Updated: 2026-09-27
- Subject: Engineering Graphics and Design
- Grade: Grade 11
- Document type: Question paper
- Year: 2014
- Exam period: Eastern Cape November
- Paper: 2
- Curriculum: CAPS
- Pages: 6

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 11](https://www.hlayiso.com/library/grade-11) › [Engineering Graphics and Design](https://www.hlayiso.com/library/grade-11/engineering-graphic-and-design) › [Engineering Graphics and Design Grade 11 P2 2014 QP](https://www.hlayiso.com/library/egd-gr11-2014-p2/322e4b9f-00c2-4de6-a35a-69dbfdeef5ff)

## About this document

Engineering Graphic And Design · Grade 11 · Eastern Cape November · 2014. Question paper, 6 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

*IGRDDM2*

### Page 2

Engineering Graphics and Design/P2

Downloaded from hlayiso.com

EC DBE/November 2014

QUESTION 1: ANALYTICAL (MECHANICAL)

Given:
Four views of a steering bracket with a title block and a table of
questions.

Instructions:
Complete the table below by neatly answering the questions, which

+ all refer to the accompanying drawings and title block.
a Show all calculations. [29]
1 | On what date was the drawing first checked? 1
WA 2. | From what material is the steering bracket manufactured? 1
i 3. | Which drawing method was used to create these drawings? 1
VIEW 2 _-(6|_ i a
~ 4 How many threaded holes are there in this drawing? 1
5 | How many sets of drawings are there? 1
“ 2s 2328 6 | What is the tolerance allowed on the dimensions? 1
He 7 | How deep must the M10 thread be? 1
/PoD.110 & L 8 | What is feature A called? 1
9 [Determine the dimension at B? 2
DRILL 5 THR -
M10x7 DEEP 10 | What is feature C called? 1
2x45" aaa 11 | Whats the size of angle D? 1
a 12 | What is the size of the hole marked E? 2
— al
4 13 | What is the size of the arc marked F? 2
as 7 1 ~ 14 | Determine the dimension at G? 1
=== 15 | What type of section is shown on VIEW 2? 1
16 | What type of section is shown on VIEW 4? 1
17 | What do the letters P.C.D. stand for? 1
18 | How many 010 holes need to be drilled in the bracket? 1
19 | What would VIEW 3 be called? 1
99 | Draw the cutting plane located on VIEW 1, forthe sectional VIEW 3
4, and label it A-A,
VIEW 1 VIEW 4 94 |n the box below (ANSWER 21), draw, in neat freehand, the 4
symbol for the projection system used.
TOTAL 29
1
ALL DIMENSIONS ARE IN MILLIMETRES. DATE CHANGED BY REVISION DESCRIPTION No
UNLESS OTHERWISE DRAWN BY: JP. DRAWING SET NO. 2 OF 6 MATERIAL: CAST IRON ANSWER 21
SPECIFIED, TOLERANCES ’
Suse ee DATE; 20/12/2013 FILE NAME: SB-48-2013 HEAT TREATMENT: NONE
£0.25 CHECKED BY: SvR WEST STREET
PROCAST MATATIELE -
ALL UNSPECIFIED RADII DATE: 15/01/2014 MANUFACTURING 4730
ARE R2 www. procast.co.za
APPROVED BY: DE EXAMINATION NUMBER
DATE: 17/02/2014
DRAWING PROGRAM
‘AUTOCAD 2014 SCALE 1.2 STEERING BRACKET SYMBOL EXAMINATION NUMBER [2

Copyright reserve

Please tum over

### Page 3

Engineering Graphics and Design/P2

Downloaded from hlayiso.com —

QUESTION 2: LOCI (CAMS)

Given:

* The shaft and follower detail of an industrial cam
with follower shown at its lowest position. The
minimum cam radius is 15 mm.

The specifications for the movement is as follows:
The cam shaft rotates clockwise at uniform velocity.
Over the first 60°, the follower rises 14 mm,

Over the next 30°, the follower rises a further 14 mm,
There is a dwell period for the next 60°.

Over the next 60°, the follower rises 26 mm

Over the next 30°, the follower falls 18 mm.

There is a dwell period for the next 30°.

Over the next 30°, the follower falls a further 18 mm.
There is a dwell period for the next 30°.

Over the final 30°, the follower returns to its original
position,

ee

Instructions:

2.1. Draw, to scale 1:1, a displacement graph with a scale
of 30° equal to 8 mm and a follower displacement
scale of 1:1 for the given motion. Also, determine the
displacement at the following degrees: 75°, 225°,
285° and 345°. Indicate the degrees at the bottom of
the graph. Label the graph.

2.2. Project and draw the cam profile that would generate
the given motion. Use the extra degrees (75°, 225°,
285° and 345°) plotted on the graph to obtain a more
accurate curve. Indicate the degrees on the cam
profile. The arrow indicating the direction of rotation
must be shown.

* Show ALL necessary construction. [38]

SHAFT 20

ASSESSMENT CRITERIA

1 GRAPH + LABEL 12

2 ARROW + SHAFT + MIN

RADIUS +DEGREE+CL | ©

3 CONSTRUCTION 6

4 CAM POINTS %

5 CURVE + QUALITY 4b

TOTAL | 38

EXAMINATION NUMBER

EXAMINATION NUMBER [3

Copyright reserve

Please tum over

### Page 4

Engineering Graphics and Design/P2

Downloaded from hlayiso.com —

QUESTION 3: ISOMETRIC DRAWING

Given:
The front view, top view and right view of a model
© The position of point B on the drawing sheet.

Instructions:
Convert the orthographic views of the model into a
scale 1: 1 isometric drawing.

* Make corner B the lowest point of the drawing.
* Show ALL necessary circle and other construction.
* NO hidden detail is required. [39]

84

50.

ASSESSMENT CRITERIA

1. AUX. VIEW+PLACING | 3

2. BASE 113
3. HEXAGON 133,
4, WEB 2
5. ISOMETRIC CIRCLES 4
6. CIRCLE CONSTRUCTION | 23
7. CENTRE LINES a

TOTAL | 39

EXAMINATION NUMBER

EXAMINATION NUMBER [4

Copyright reserve

Please tum over

### Page 5

Engineering Graphics and Design/P2

Downloaded from hlayiso.com

EC DBE/November 2014

40

R12

34
26

DATE: 25/02/2014

108. | 180
ALL DIMENSIONS ARE | DRAWN BY: BASE
T ,
INMILIMETRES DATE: (6 BUFFALO STREET
x EVERY SHAFT MTHATHA
ALLUNSPECIFIED | CHECKED BY: 1c 6001 EASTERN CAPE
RADII ARE R3. Sovaor MANUFACTURING www.everyshatt.co.za DEPARTMENT BASIC EDUCATION
DATE: 20/01/2014 NT BASIC!
APPROVED BY: cw | ™ NOVEMBER 2014
DRAWING PROGRAM:
CAD 2014 SHAFT SUPPORT

e ‘ARTS LIST
gt PART QUANTITY | MATERIAL
125 | 1. BASE 1 CAST IRON
| 2. SHAFT 1 Mo sree
3g = = = =" gy 3. HOUSING 1 CAST IRON
= 4, BUSH 1 BRONZE
5. GREASE
NIPPLE 1 CAST IRON
6. PIN 1 MILD STEEL
SHAFT 7. WASHER 1 MILD STEEL
932) | 24
| | Ay 8, NUT 1 MILD STEEL
a OF
7 eet A 2 o24
e —H | 8 /
8 a el J fi ns | (A L\
Ai LU  fireta gy Tr ES
1} 1 ‘\ of a eY/
4 arr | | ‘
SJ at “M10
238 oe Ra
j__46
HOUSING GREASE NIPPLE PIN WASHER M10 NUT
on 90
038 226 |
32

QUESTION 4: MECHANICAL ASSEMBLY

Given:

* The exploded isometric drawing of the parts of a shaft
support assembly, showing the position of each part
relative to all the others.

© Orthographic views of each of the parts of the shaft
support assembly.

* Point S as a reference point on page 6.

Instructions:

* Answer this question on page 6.

* Draw, to scale 1: 1 and in third-angle orthographic
projection, the following views of the assembled parts of
the shaft support assembly:

**  Asectional front view, on cutting plane A-A, as
seen from the direction of the arrow shown on the
exploded isometric drawing. The cutting plane is
shown on the left view of the base (part 1),

«2 The left view.

* ALL drawings must comply with the guidelines contained
in the SABS 0111.

NOTE:

« Show three sides of the nut in the sectional front view.
« Show all the constructions for the nut.

* No hidden detail is required.

Insert the following detail to the drawing
The cutting plane A-A
* Label the sectional view: SECTION A-A

SCALE 1:1

[94]

Copyright reserve

Please tun over

### Page 6

Engineering Graphics and Design/P2

EC DBE/November 2014

Downloaded from hlayiso.com

ASSESSMENT CRITERIA

LEFT VIEW + GENERAL

1. BASE 12

2, HOUSING 43

3, SECTION AA 3

ACENTERLINES | 5

LABEL 3
HATCHING. 12
ASSEMBLY 7

SUBTOTAL | 463

SECTIONAL FRONT VIEW

1, BASE 6
2, HOUSING 14
3. BUSH 3
4. GREASE 6
NIPPLE
5, SHAFT 7
6, PIN 1
7. WASHER 2
8, NUT 8
SUBTOTAL | 47}
SUBTOTAL | 46}
TOTAL | 94
EXAMINATION NUMBER
EXAMINATION NUMBER [6

Copyright reserve

## Related documents

- [EGD P2 Memo](https://www.hlayiso.com/library/egd-p2-memo/1650e54a-d35c-4f99-91bf-2299df4439f9) — Engineering Graphic and Design · Memo · 2014
- [EGD Gr11 2014 V2 AFR](https://www.hlayiso.com/library/egd-gr11-2014-v2-afr/f82b7770-6670-40ce-b7af-169e40712c55) — Engineering Graphic and Design · QP · 2014 · Afr
- [EGD P1 GR11 NOV2014 ENG](https://www.hlayiso.com/library/egd-p1-gr11-nov2014-eng/9abc6289-59aa-4a92-860e-6fc8fe94b2fd) — Engineering Graphic and Design · QP · 2014 · Eng
- [EGD P1 GR11 NOV2014 AFR](https://www.hlayiso.com/library/egd-p1-gr11-nov2014-afr/dd4a4928-eaa9-4f7d-b1cc-0cc4cf7d1592) — Engineering Graphic and Design · QP · 2014 · Afr
- [GR11 EGD P2 NOV 2020 QUESTIONPAPER](https://www.hlayiso.com/library/gr11-egd-p2-nov-2020-questionpaper/a88d243b-6377-4536-845b-80709134cf5e) — Engineering Graphic and Design · QP · 2020
- [EGD P2 Gr11 Nov 2019 AFR D](https://www.hlayiso.com/library/egd-p2-gr11-nov-2019-afr-d/450ae1e9-e7cc-4593-ad59-e30291f56347) — Engineering Graphic and Design · QP · 2019 · Afr

## More from Grade 11 Engineering Graphics and Design

- [Gr 11 EngGraph Des ATP 2023-24](https://www.hlayiso.com/library/gr-11-enggraph-des-atp-2023-24/6fbec59e-8df9-49dc-9042-1e84389c22fa) — ATP
- [EGD P1 GR11 MEMO NOV2022 Afr+Engl](https://www.hlayiso.com/library/egd-p1-gr11-memo-nov2022-afr-engl/dc8a6861-4564-49b7-9da7-af10cd3460f8) — Memo · 2022 · Afr
- [EGD P2 GR11 MEMO NOV2022 Afrikaans](https://www.hlayiso.com/library/egd-p2-gr11-memo-nov2022-afrikaans/085022c0-c1e2-44e3-8f13-b13c4d9661fd) — Memo · 2022 · Afr
- [EGD P2 GR11 MEMO NOV2022 English](https://www.hlayiso.com/library/egd-p2-gr11-memo-nov2022-english/50c4e044-b732-4d91-bcb3-e98c1bc8bfc1) — Memo · 2022 · Eng
- [EGD P1 GR11 MEMO NOV2022 Afr+Engl](https://www.hlayiso.com/library/grade-11-engineering-graphic-and-design-2022-exemplar-november-exam-memorandum-paper-1-english/9926f9cd-76bc-4eff-a287-c1394b665aaf) — Memo · 2022 · Eng
- [EGD P2 GR11 MEMO NOV2022 Afrikaans](https://www.hlayiso.com/library/grade-11-engineering-graphic-and-design-2022-exemplar-november-exam-memorandum-paper-2-afrikaans/964722fb-b9df-42a0-a525-cbab4bbad105) — Memo · 2022 · Afr

## Collection

- [Grade 11 past papers](https://www.hlayiso.com/grade-11/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.