# Engineering Graphics and Design Grade 11 P2 2017 QP (Eng)

> Grade 11 Engineering Graphics and Design Paper 2 question paper from the Eastern Cape November 2017 (English), 6 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/egd-gr11-p2-2017-eng/5e26d778-a653-4d03-a1b0-1cb55bba4968
- Updated: 2026-09-27
- Subject: Engineering Graphics and Design
- Grade: Grade 11
- Document type: Question paper
- Year: 2017
- Exam period: Eastern Cape November
- Paper: 2
- Curriculum: CAPS
- Pages: 6

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 11](https://www.hlayiso.com/library/grade-11) › [Engineering Graphics and Design](https://www.hlayiso.com/library/grade-11/engineering-graphic-and-design) › [Engineering Graphics and Design Grade 11 P2 2017 QP (Eng)](https://www.hlayiso.com/library/egd-gr11-p2-2017-eng/5e26d778-a653-4d03-a1b0-1cb55bba4968)

## About this document

Engineering Graphic And Design · Grade 11 · Eastern Cape November · 2017. Question paper, 6 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

 *IGRDSE2*

### Page 2

Downloaded from hlayiso.com

Engineering Graphics and Design/P2

Nsc.

EC DBE/November 2017

QUESTION 1: ANALYTICAL (MECHANICAL)

Given:
Hoy 25 Parts of a pulley tensioner with a title block and a table of questions
= Instructions:
T Complete the table below by neatly answering the questions, which all
--4 M10 NUT refer to the accompanying drawings and title block.
t Show all calculations. [30]
What is the indicated scale of the drawing?
BEARING BUSH BASE ‘ g ‘
2. | From what material is the spring manufactured? 1
5 3 | Which drawing programme was used to create these drawings? 1
om i | 8p 4. | What is the drawing file name? 1
5 | What is the website address of the company? 1
KA IA\ 6 | What is the tolerance allowed on the dimensions? 1
vi } 7 | Why was the drawing revised? 1
ll 8 | At what angle is feature A drawn? 1
9 | What is feature B called? 1
10 | What is feature C called? 1
PULLEY ARM 11 | What is feature D called? 1
18) 12 | Whatis the radius of the arc at D? 1
13 | Identify the line type at point E. 1
14 | What does the double arrows at F indicate? 1
15 | Determine the dimension at G 2
4g | Ifa standard size M10 nut was used, calculate the thickness of
6 2
I the nut at H.
08 40
\ 17 | What type of section is shown at the BEARING? 1
18 | What does A/F mean at the M10 nut? 1
Qn 49 | Inthe box below (ANSWER 19), draw, in neat freehand, the 6
SANS convention for a BEARING
SPACER SPRING (A) | 99 | Inthe box below (ANSWER 20), draw, in neat freehand, the 4
Ss symbol for the projection system used
24/03/17 SANJAY CHANGE SPRING SPECIFICATION 1 {B) TOTAL 30
ALL DIMENSIONS ARE IN MILLIMETRES. DATE CHANGED BY REVISION DESCRIPTION No
(IES GR ERIS DRAWN BY: Keith DRAWING SET NO. 1 OF 3 MATERIAL: VARIOUS PARTS LIST ANSWER 19 ANSWER 20
ae DATE: 15/02/2017 FILE NAME: TEN-53-2017 HEAT TREATMENT: NONE PART QUANTITY | MATERIAL PART QUANTITY | MATERIAL
£0,36. CHECKED BY: Ann WM PULLEY VAN NIEKERK STREET 1. BASE 1 CASTIRON | 6. SPRING 1 SPRING STEEL
ALL UNSPECIFIED RADII DATE: 18/03/2017 MANUFACTURING Moe pURS 2. ARM 1 CAST IRON 7. SPACER 1 MILD STEEL CONVENTION FOR BEARING SYMBOL
eek J www.pulley.co.za 3. PULLEY 1 CASTIRON | 8. SHAFT 1 MILD STEEL
APPROVED BY: Peter
NAME
DATE: 28/03/2017 4, BUSH 1 MILD STEEL 9. BEARING 4 MILD STEEL
DRAWING PROGRAM

Copyright reserved

Please tum over

### Page 3

Engineering Graphics and Design/P2

Downloaded from hlayiso.com —

42

QUESTION 2: LOCI (CAMS)

Given:

* The shaft and follower detail of an industrial cam
with follower shown at its lowest position. The
minimum cam radius is 16 mm.

The specifications for the movement is as follows:
The cam shaft rotates clockwise at uniform velocity.
Over the first 30°, the follower is at rest;

Over the next 60°, the follower rises 60 mm;

There is a dwell period for the next 30°;

Over the next 60°, the follower falls 35 mm;

There is a dwell period for the next 30°;

Over the next 45°, the follower rises 25 mm.

There is a dwell period for the next 30°.

Over the final 75°, the follower returns to its original
position.

Instructions:

2.1. Draw, to scale 1:1, a displacement graph with a scale
of 30° equal to 8 mm and a follower displacement
scale of 1:1 for the given motion. Indicate the
degrees below the graph. Label the graph.

2.2. Project and draw the cam profile that would generate
the given motion. Indicate the degrees on the cam
profile. The arrow indicating the direction of rotation
must be shown.

© Show ALL necessary construction.
© Donot show the cam follower [38]

SHAFT @22

@)

R16

ASSESSMENT CRITERIA

4. GRAPH + LABEL 1

2. ARROW + SHAFT + MIN
RADIUS + DEGREE + CL

3. CONSTRUCTION 7

4, CAM POINTS: 8

5. CURVE + QUALITY 6

TOTAL | 38

NAME:

NAME [3

Copyright reserved

Please tun over

### Page 4

Downloaded from hlayiso.com

Engineering Graphics and Design/P2

Nsc

EC DBE/November 2017

a

42

QUESTION 3: ISOMETRIC DRAWING

Given:

© The front view, top view and left view of a si
guide

© The position of point B on the drawing sheet.

Instructions:
Convert the orthographic views of the sliding guide into
ascale 1: 1 isometric drawing.

* Make corner B the lowest point of the drawing
* Show ALL necessary circle and other construction.
* NO hidden detail is required. [42]

40

10 30 40 15,
eee

15,

55.
tT
|

ha ha

95.

ASSESSMENT CRITERIA

1, AUX, VIEW + PLACING 3

2. ISO'&NONISOLINES | 243

3. HEXAGON 6

4. ISO’ CIRCLES + CL 8

TOTAL | 42

NAME

NAME, [4

Copyright reserved

Please turn over

### Page 5

Engineering Graphics and Design/P2

ownloaded from

+ +
BASE (1)
uo
7 7
ore ' I FY
| oe
g [jf
i i Fe
I I
R35 20
Ht
Lit {| NZ ' 48
—
L25_[as |
24 56 60
BEARING CAP (2)
H H
i i
i tla a
if | > *|
I I
I I
240 230 230
BUSH (3) SHAFT (4)

patsy

ay 5
sth
M16 STUD (6)

932 o16

{

of

WASHER (6)

hlayiso.com ——

QUESTION 4

Given:

* The exploded isometric drawing of the parts of a bearing housing,
showing the position of each part relative to all the others

‘* Orthographic views of each of the parts of the bearing assembly

Instructions:
4 + Answer this question on page 6.
2 * Draw, to scale 1:1 and in third-angle orthographic projection, the following
v= views
Of 4.1. The sectional front view on cutting plane A-A, as seen from the
M16 NUT (7) direction of the arrow shown on the exploded isometric drawing

The cutting plane passes through the vertical centre line of the
assembly, is shown on the top view of the base (part 1).
4.2. The top view without hidden detail
4.3. The sectional left view on cutting plane B-B.
NOTE:
* Show THREE faces of the M16 nut and ALL necessary construction
‘* Insert the two cutting planes on the relevant view.
* NO hidden detail is required [90]

PARTS LIST
PART QUANTITY MATERIAL
1. BASE 1 CAST IRON
2. BEARING CAP 1 CAST IRON
3. BUSH 1 MILD STEEL
4. SHAFT 1 MILD STEEL
5. STUD 1 MILD STEEL
6. WASHER 1 MILD STEEL
ALL DIMENSIONS ARE | DRAWN BY: «eir7r 7. M16 NUT 1 MILD STEEL
IN MILLIMETRES. DATE: 20/01/2017 VAN NIEKERK STREET
ALL UNSPECIFIED Mw MANUFACTURING 5900 EASTERN CAPE
RADII ARE R3. DATE: 27/02/2017 www bearing.co.za DEPARTMENT BASIC EDUCATION
alana GRADE 11
Poee | TRE NOVEMBER 2017
APPROVED BY: FETE
DRAWING PROGRAM:
me raperan: [erro BEARING HOUSING |} E| i

Copyright reserved

Please turn over

### Page 6

Downloaded from hlayiso.com

Engineering Graphics and Design/P2

Nsc

EC DBE/November 2017

ASSESSMENT CRITERIA
SECTIONAL LEFT VIEW
1, BASE 8
2. BEARING CAP 4
3. BEARING 4
4. SHAFT 5
ASSEMBLY 6
3rd ANGLE PROJ 2
SUBTOTAL | 24
TOP VIEW
1. BASE 1g
2. BEARING CAP 23
3. SHAFT 5
4, M16 NUT & STUD 6
5. WASHER, 1
6. CUTTING PLANE 7
SUB TOTAL | 234
SECTIONAL FRONT VIEW
1. BASE, 13,
2. BEARING CAP 6
3. BUSH & SHAFT 23
4, M16 NUT 7
5. WASHER, 2
6. STUD 12
SUB TOTAL | 424
TOTAL | 90
NAME,
NAME 6

Copyright reserved

## Related documents

- [EGD Gr11 P2 2017 Afr](https://www.hlayiso.com/library/egd-gr11-p2-2017-afr/a11a597c-aaa0-42f0-97ad-7ac5e6682ecd) — Engineering Graphic and Design · QP · 2017 · Afr
- [EGD Gr11 P2 2017 MEMO](https://www.hlayiso.com/library/egd-gr11-p2-2017-memo/0131c250-b6cf-4e45-8c7c-7a8655597dda) — Engineering Graphic and Design · Memo · 2017
- [EGD GR 11 NOV 2017 P1 AFR](https://www.hlayiso.com/library/egd-gr-11-nov-2017-p1-afr/9957c091-a3bb-48e3-93be-3323bdd99f48) — Engineering Graphic and Design · QP · 2017 · Afr
- [EGD GR 11 NOV 2017 P1 ENG](https://www.hlayiso.com/library/egd-gr-11-nov-2017-p1-eng/f3a2cb2f-9b1d-4724-bb43-bde55ea9044a) — Engineering Graphic and Design · QP · 2017 · Eng
- [GR11 EGD P2 NOV 2020 QUESTIONPAPER](https://www.hlayiso.com/library/gr11-egd-p2-nov-2020-questionpaper/a88d243b-6377-4536-845b-80709134cf5e) — Engineering Graphic and Design · QP · 2020
- [EGD P2 Gr11 Nov 2019 AFR D](https://www.hlayiso.com/library/egd-p2-gr11-nov-2019-afr-d/450ae1e9-e7cc-4593-ad59-e30291f56347) — Engineering Graphic and Design · QP · 2019 · Afr

## More from Grade 11 Engineering Graphics and Design

- [Gr 11 EngGraph Des ATP 2023-24](https://www.hlayiso.com/library/gr-11-enggraph-des-atp-2023-24/6fbec59e-8df9-49dc-9042-1e84389c22fa) — ATP
- [EGD P1 GR11 MEMO NOV2022 Afr+Engl](https://www.hlayiso.com/library/egd-p1-gr11-memo-nov2022-afr-engl/dc8a6861-4564-49b7-9da7-af10cd3460f8) — Memo · 2022 · Afr
- [EGD P2 GR11 MEMO NOV2022 Afrikaans](https://www.hlayiso.com/library/egd-p2-gr11-memo-nov2022-afrikaans/085022c0-c1e2-44e3-8f13-b13c4d9661fd) — Memo · 2022 · Afr
- [EGD P2 GR11 MEMO NOV2022 English](https://www.hlayiso.com/library/egd-p2-gr11-memo-nov2022-english/50c4e044-b732-4d91-bcb3-e98c1bc8bfc1) — Memo · 2022 · Eng
- [EGD P1 GR11 MEMO NOV2022 Afr+Engl](https://www.hlayiso.com/library/grade-11-engineering-graphic-and-design-2022-exemplar-november-exam-memorandum-paper-1-english/9926f9cd-76bc-4eff-a287-c1394b665aaf) — Memo · 2022 · Eng
- [EGD P2 GR11 MEMO NOV2022 Afrikaans](https://www.hlayiso.com/library/grade-11-engineering-graphic-and-design-2022-exemplar-november-exam-memorandum-paper-2-afrikaans/964722fb-b9df-42a0-a525-cbab4bbad105) — Memo · 2022 · Afr

## Collection

- [Grade 11 past papers](https://www.hlayiso.com/grade-11/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.