# Engineering Graphics and Design Grade 12 P1 2018 Memo

> Grade 12 Engineering Graphics and Design Paper 1 memorandum from the Eastern Cape Mock Exam 2018, 7 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/egd-p1-gr-12-sept-memo-ea/98991191-ca71-4de5-87f4-dab0ebb30bde
- Updated: 2026-09-27
- Subject: Engineering Graphics and Design
- Grade: Grade 12
- Document type: Memorandum
- Year: 2018
- Exam period: Eastern Cape Mock Exam
- Paper: 1
- Curriculum: CAPS
- Pages: 7

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Engineering Graphics and Design](https://www.hlayiso.com/library/grade-12/engineering-graphic-and-design) › [Engineering Graphics and Design Grade 12 P1 2018 Memo](https://www.hlayiso.com/library/egd-p1-gr-12-sept-memo-ea/98991191-ca71-4de5-87f4-dab0ebb30bde)

## About this document

Engineering Graphic And Design · Grade 12 · Eastern Cape Mock Exam · 2018. Memorandum, 7 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                    ISEBE LEMFUNDO LEMPUMA KOLONI
                  EASTERN CAPE EDUCATION DEPARTMENT
                    OOS-KAAP ONDERWYSDEPARTEMENT

                 NATIONAL SENIOR CERTIFICATE
                NASIONALE SENIOR SERTIFIKAAT

                                      GRADE 12
                                      GRAAD 12

               ENGINEERING GRAPHICS AND DESIGN P1
                INGENIEURSGRAFIKA EN -ONTWERP V1

                         SEPTEMBER 2018
                 MARKING GUIDELINE / NASIENRIGLYN

MARKS / PUNTE: 200

TIME / TYD: 3 hours / uur

This memorandum consists of 7 pages.
Hierdie memorandum bestaan uit 7 bladsye.

Copyright reserved / Kopiereg voorbehou

### Page 2

Downloaded from hlayiso.com
Engineering graphichs and design/P1                            NCS                                               EC /September 2018

                   ANSWERS                                                              ANTWOORDE
       1    SITE -2018                                     1                 1        SITE -2018                                1

       2    REBECCA                                        1                 2        REBECCA                                   1

       3    2018 - 09 - 01                                 1                 3        2018 - 09 - 01                            1

            INDICATE THE TYPE OF FENCING                                              DUI DIE TIPE HEINING AAN
       4    USED
                                                           1                 4                                                  1

       5    Mr. M. MULLER                                  1                 5        Mnr. M. MULLER                            1

       6    RAILWAY LINE                                   2                 6        SPOORLYN                                  2

       7    2400 mm (2.4m = 21 mark)                       1                 7        2400 mm (2.4m = 21 punt)                  1

       8    RODDING EYE                                    1                 8        STEEKOOG                                  1

       9    ELECTRICAL WATT METER                          1                 9        ELEKTRIESE WATT METER                     1

      10    ONE                                            1                10        EEN                                       1

      11    MAN HOLE                                       1                11        MANGAT                                    1

      12    ELECTRICAL FENCE                               1                12        ELEKTRIESE HEINING                        1

      13    RED                                            1                13        ROOI                                      1

      14    BLACK                                          1                14        SWART                                     1

                                           TOTAL         25                                                  TOTAAL            25

    ANTWOORD / QUESTION 17
                                                                    ANTWOORD / QUESTION 15
             Vryhand 1                                             Toon alle berekeninge / Show all calculations
             Freehand                                                             1
                                                                                                   optel berekening
                                              calculation: add                              1

                     1
                                              correct values           45,8 + 84 + 46 + 87         korrekte waardes
                                              correct answer                 1
                                                                                                   korrekte antwoord
                                 1            correct unit             =262,8 m 1                  korrekte eenheid
                                                                                                                         [2]
                                                                   ANTWOORD / QUESTION 16
               1
                         1
                                                                   Toon alle berekeninge /Show all calculations
                                            calculation (X), (-)                      1      optel berekening (X), (-)
                                                                            1
                                            correct values           15,2 x 9,5 = 144,4 korrekte waardes
                                            correct answer                                   korrekte antwoord
                                                                     12,6 x1 6,2 = 78,12 korrekte eenheid en
               1
                                            correct unit and                          1

                                            conversion to m                                  omskakeling na m
                                                                                       9 m² 1
                                                                     144,4 -1 78,12 =66,28
                     1
                             1

                                     [4]                                                                                 [4]
                                                                                                                                    2
Copyright reserved                                                                                                     Please turn over

### Page 3

Downloaded from hlayiso.com
Ingenieursgrafika en -ontwerp/V1                                                NSS                                                        EC / September 2018

                                                                                2                                       2

                                                                                                                                                 92 = 6
                                   3
                                                                                2
                                                                                                                                                  = 6
                                                                                                                                                  2
                                                       2
                                                                       3            92
                                                                                             92

                                                                           2                 92                 2
                                                       3
                                                                                                           2

                                                                                             92
                                                                   2
                                                                                    92                                                       2

                                                                                             92
  ASSESSMENT CRITERIA                                                                                  2

       TOP VIEW &
  1 CENTRE LINES              7                                                      2

  2 FRONT VIEW                12
                                                                                                           2

  3 CONSTRUCTION              2
   4 DEVELOPMENT              11
                                               3
  PENALTIES (-)

                      TOTAL   32

                                                                                                   1
                                                                                                                                    1

                                                                           1

                                                                                                                X           1
                                           1                   1

                                                   1
                                                                           1
                                                                                                                    1
                                                                                                                                1
                                                                                                       1

                                               1           1

                                                                           1

                                                                                                                                         ASSESSERINGSKRITERIA
                                   CUTTING EDGE
                                                                                                                                          BOAANSIG &
                                                                                                                                        1 HARTLYNE          7
                                       4
                                                                                    94 = 7                                              2 VOORAANSIG        12
                  4
                                                                                     = 4
                                                                                         4
                                                                                                                                        3 KONSTRUKSIE       2
                                                                       4                                                                4 ONTWIKKELING      11
                                                                                         4

                                                                                                   4
                                                                                                                                        PENALISERING (-)
  A
                                                                                                                    4
                                                                                                                                                 TOTAAL    32

   94                    94                                94                  94             94           94           94

                                                                                                                                                            3
           4                                                                                       4

   B

Kopiereg voorbehou                                                                                                                                Blaai om asb.

### Page 4

Downloaded from hlayiso.com
Engineering graphichs and design/P1                                                                                            NCS                                                                               EC / September 2018

                                                                                                                                                             4
                                                                                                                                                Mu
                                                                                                                                                    ur
                                                                                                                                                    A
                                                                                                                                                                 4

                                                                                                       1
                     PP

                                                                                                                                                                                                                                                                 1
                                          1

                                                                                                           1

                                                                                                                                                                                                                                                 4

                                                                                                                                                                                                                                 4
                                      1
                                                                                                                                                                                                                                                             1           1
                     HL                                   1

                                  LVP                                                                                                                                                                                                                                RVP

                     GL

                                                                                              SP
                                                                                                                                   ASSESSMENT CRITERIA                                                   ASSESSERINGSKRITERIA

                                                                                                                   1 CONSTRUCTION + VPs                                                  4               1 KONSTRUKSIE & VPte                                        4

                                                                                                                   2 BRAAI & SEAT                                                        23              2 BRAAI & BANKIE                                            23

                                                                                                                   3 WALLS & ROOF SLAB                                                   13              3 MURE & DAKKIE                                             13

                                                                                                                   4 CIRCLE                                                              5               4 SIRKEL                                                    5

                                                                                                                                                                         TOTAL           45                                      TOTAAL                              45

                                                                                               2                   2

                                                                                          2            2
                              3                                                                                                         2
                                      3
                                                                              3

                                  3       3
                                                                                                                                                                                                                              = 5
                          3                           3
                                                                          3                                                                                                                                                                  4
                                              3
                                  3                                                                                                                                                                          3
                                                                      3                        3                   3

                                                                                                                                                                 3                                                           4
                                                                                                                                                                                                 3
                                                                                                                                                                                                                         4
                                                                                          2            2                                2

                                                                                               2                       2
                                                                                                                                                          = 23     2
                                                                                                                                                                                                                                 4
                                                                                                                                                                                                                                             4

                                          3       3           3                       2
                                                                                                   2                                        2

                                                                                                                       2                                                                                                                             4
                                                                                                                                                                                                                                     4

  LVP                                                                                 2
                                                                                                                                                                                     3
                                                                                                                       2

                                                                                                                                    2           2
                                                                                                   2
                                                                                                                                                         2                                                                               3               3
                                                                                                               2                            2

                                                                              2       2                                    2
                                                                                                                                                                         2                       2
                                                                                                                           2                                                             2
                                                                                                                                                                         2                           2
                                                                                                                                                                                 2                       2
                                                                                                                                                                                                                                                  = 13
                                                                                                                                                                                                 2
                                                                                                                                        2       2                                                                                                            3
                                                                                                   2                                                                     2
                                                                                                                               2
                                                                                                                                                                                             2       2               3
                                                                                                                                            2
                                                                                                                                                     2
                                                                  2               2
                                                                                               2
                                              3                                                                                                                                                                  3

                                                                      3

                                                                                                                                            SP                                                                                                                       4
Copyright reserved                                                                                                                                                                                                               Please turn over

### Page 5

Downloaded from hlayiso.com
Engineering graphichs and design/P1                                                  NCS                                                   EC / September 2018

                                             A

                                                                                                        3           3
                     3                                           3
                                                                                 2            3                 3
                                                             3       3                                                 3

                                       2
                                                                                                                2

                     BADKAMER                                                                                                     KITCHEN 5
                                             A                                                              2 x 40 W
                       TEELS                                                                                    2                   TILES 5
                     3
                                  2                              2                                                                KOMBUIS
                             3
                                                                             2
                                                                                                                                   TEELS
                         3
                                 BATHROOM 5                                                        2

                                   TILES 5                                                                                     COUNTER TOP
                                                         2
                                                                                                                                TOONBANK
                                                 2                                   2

                                                     2
                         2

                                                                                                                           2

                                             2

                                                                                               2
                                           BEDROOM 5                                                       LIVING AREA 5
                                            CARPET 5                                                   LAMINATED FLOORING 5
                                           SLAAPKAMER                                                      LEEFAREA
                                               MAT                                                     GELAMINEERDE VLOER

                                                                                                                                      2
                                                                                                            2

                                                                             2

  Arsering: Alles gearseer             9
            Korrekte tipe              9
                                                                                                                                  FLOOR PLAN
            Met instrumente            9                                                                                          SCALE 1 : 50
                                                                                         2

  Hathing:    All hatched     9                                                                                                    VLOERPLAN
             Correct type    9
                                                                                                                                   SKAAL 1 : 50
             Instruments used 9

                                      ASSESSMENT CRITERIA                                    ASSESSERINGSKRITERIA
                                                                                                                                                  5 X VENSTERS
                                             FLOOR PLAN                                                                                           5 X WINDOWS
                                                                                                        VLOERPLAN
                             1
                                      1 DOORS +
                                        WINDOWS
                                                                     11 21
                                                                                             1 DEURE &
                                                                                                                                   11 21
                                                                                                                                              1
                                                                                                                                                         1

                                                                                               VENSTERS                                                  1

                                                                                                                                                   5 X 1,5 = 7.5
                             2        2 ELECTRICAL                    10
                                                                                             2 ELEKTRIES                           10

                             3        3 FIXTURES                         6                   3 TOEBEHORE                            6                1

                                                                                                                                                         4 X DOORS
                             4
                                      4 HATCHING                         3                   4 ARSERING                             3                    4 X DEURE
                                                                                                                                                             1

                             5
                                      5 LABELS                           4                   5 BYSKRIFTE                            4                    4X1=4

                                        SUBTOTAL                     34 21                    SUBTOTAAL                           34 21

                                                                                                                                                                   5
Copyright reserved                                                                                                                                  Please turn over

### Page 6

Downloaded from hlayiso.com
Engineering graphichs and design/P1                                                         NCS                                                       EC / September 2018

                                                                                            1

                                                                                            1

                             1                                                                                                                    1

                                                                                                1

                                                                           1                                 1

                                                                           1                                 1
                                         1                                                                                                1
  1                                                                                                                                                                          1
                         1                                                                                                                                    1
                                                               1                                                          1
                                 1                                                          2                                                         1
                                         3                                                                                                    3

                                                                                            3
      1
                             3                                                                                                    3

                             3                                                                                                    3

                                                                                                                              3       3                   3
                     3       3           3                 3                                                                      3
                                                                                                         2       2
                                                                       2       2
                                                                                        3
                                                                                                    3
          1                  3                                                                                                    3
              2                                                                                                                                                    2

                                               3                                                                                              3

                                         3
                                                                                                                                      3

                                                   4
                                             FFL
                                                                                            2
                                                       2
          1
                                                                                                2

 NGL 2                                                             2                                                  2
                                                                                                                                                                           NGL 4
                                     2

                                                                           NOORD ELEVASIE 4
                                                                             SKAAL 1 : 50 4
                                                                           NORTH ELEVATION
                                                                             SCALE 1 : 50

                                     ASSESSMENT CRITERIA                                                 ASSESSERINGSKRITERIA

                                         NORTH ELEVATION                                                             NOORD ELEVASIE

                         1 FACIA,
                           ROOF, GUTTER,
                                  BADGE BOARD                                       11                  1 DAK, GEUT, FASSIE,
                                                                                                          WINDVEER
                                                                                                                                                      11

                         2 STEPS
                           WALLS, GULLEY &
                                                                                    7                   2        MURE, SYFERPUT &
                                                                                                                 TRAPPE
                                                                                                                                                      7

                         3 DOORS + WINDOWS                                         11 21                3        DEURS +
                                                                                                                 VENSTERS
                                                                                                                                                  11 21

                         4 LABELS                                                   2                   4 BYSKRIFTE                                   2

                                         SUBTOTAL                                  31 21                         SUBTOTAAL                        31 21

                                                                                                                                                                                 6
Copyright reserved                                                                                                                                                Please turn over

### Page 7

Downloaded from hlayiso.com
Engineering graphichs and design/P1                                                        NCS                                                    EC / September 2018
                                                                                                                 1. DAK BESONDERHEDE PUNTE       1. ROOF DETAIL MARK ALLOCATION
                                                                                                                         TOEKENNING

                                                                                                               1.1   DAKHELLING              1   1.1   ROOF ANGLE                1

                                                                                                                                             1                                   1
                                                                                                               1.2   DAKPLAAT                2   1.2   ROOF SHEET                2

                                                                                                               1.3   DAKLAT & SPASIE         2   1.3   PURLIN & SPACING          2

                                                                                                               1.4   DAKKAP                  1   1.4   TRUSS                     1

                                                                                                               1.5   PLAFONLAT + SPASIE      2   1.5   BRANDERNG & SPACING       2

                                                                                                                                             1                                   1
                                                                                                               1.6   PLAFONBORD              2   1.6   CEILING BOARD             2

                                                                                                               1.7   MUURPLAAT               1   1.7   WALL PLATE                1

                                                                                                               1.8   FASSIEBORD              1   1.8   FACIA BOARD               1

                                                                                                               1.9   GEUT                    1   1.9   GUTTER                    1

                                                                                                                                  TOTAAL    10                       TOTAL       10
                                                                                       2
                                                       4

                                                                       2
                                                                               4
                                                                                                                4
                                                                                           2

                                                                           4

                                                                       3               3
                                                                                                   8 x 50 = 400
                     2                                                                             400
                                                                   3                               20 = 20

     2                                   18 x 50 = 900
                                         900
                                          20 = 45
                                                                       3           3
                                                                                                                                          ASSESSERINGSKRITERIA
                                                                                                                                             DEURSNEE-AANSIG

                                                                           3                   3
                                                                                                                                       1 DAKBESONDERHEDE                  10
                                                                                               DPC 5
                2            2
                                                                                                                                       2 FONDASIES
                                                                                                                                         VLOER
                                                                                                                                                   + MURE +
                                                                                                                                                                             9

                                                                   2                       2                                           3 STORT
                                                                                                                                         VERSTERBANK +
                                                                                                                                               + LATEIE
                                                                                                                                                                             4
                     4

                                                                           4                                                           4 ARSERING                            7

                                                                                                                                       5 BYSKRIFTE                           2

                                                                                                                                            SUBTOTAAL                     32
           5

          FFL
                                                   3
                                                                                                           5                               ASSESSMENT CRITERIA
                                 4
                                                           4                               DPC
                                     2                                     2

                         4
                                                   2
                                                                                   2
                                                                                                                                             DETAILED SECTION
                                                           2

                                                                   2                       2
                                                                                                                                       1 ROOF DETAIL                      10
                         4

                                               2                           4                       2           NGL
                                                                                                                     5
                                                                                                                                       2 FOUNDATIONS
                                                                                                                                         WALLS + SLAB
                                                                                                                                                      +
                                                                                                                                                                             9

                                                               4                                       4
                                                                                                                                       3 SILL + WINDOW +
                                                                                                                                         SHOWER + LINTELS
                                                                                                                                                                             4
                                                                               4

                                                                                                                                       4 HATCHING                            7
                                                               STARTING POINT FOR
                                                                DETAILED SECTION                                                       5 LABELS                              2

                     GEDETAILEERDE SNIT A-A                                                                                                 SUBTOTAL                      32
                          SKAAL 1 : 20
                                                                                                                                                                                 7
Copyright reserved

## Related documents

- [EGD P1 Memo](https://www.hlayiso.com/library/egd-p1-memo/a7fd72cb-4b04-4221-95f6-d1c2a47b8045) — Engineering Graphic and Design · Memo · 2017
- [EGD P1 MEMO EA](https://www.hlayiso.com/library/egd-p1-memo-ea/8cc4d7e1-de42-4f0c-8b76-33e12b34de79) — Engineering Graphic and Design · Memo · 2015
- [EGD P1 EA Memo](https://www.hlayiso.com/library/egd-p1-ea-memo/93c3de46-0b35-4216-b07a-dceba0b00c50) — Engineering Graphic and Design · Memo · 2014
- [Front Page Memo](https://www.hlayiso.com/library/front-page-memo/bb4f6657-d7c4-4838-9da2-0dfa13d626d3) — Engineering Graphic and Design · Memo · 2012
- [EGD P2 Question 4 ERRATA](https://www.hlayiso.com/library/egd-p2-question-4-errata/8f736c0e-30e2-45ed-9e30-389aac501cc3) — Engineering Graphic and Design · Errata · 2018
- [EGD P2 Sept 2018 Eng](https://www.hlayiso.com/library/egd-p2-sept-2018-eng/4cc7b8c4-8834-44cc-9771-1d853e6493e2) — Engineering Graphic and Design · QP · 2018 · Eng

## More from Grade 12 Engineering Graphics and Design

- [Engineering Graphics & Design P1 May-June 2025 Afr](https://www.hlayiso.com/library/engineering-graphics-design-p1-may-june-2025-afr/bdb1c7cf-1e83-49ee-b598-eeb5026e5c71) — QP · 2025 · Afr
- [Engineering Graphics & Design P2 May-June 2025 Afr](https://www.hlayiso.com/library/engineering-graphics-design-p2-may-june-2025-afr-1/55d6af85-d3ce-4134-b1cb-91d1b25d8820) — QP · 2025 · Afr
- [EGD P1 SEP AFR QP](https://www.hlayiso.com/library/egd-p1-sep-afr-qp/7d047bec-7cce-4511-a669-aa644aa52d01) — QP · 2024 · Afr
- [EGD P2 SEP AFR QP D](https://www.hlayiso.com/library/egd-p2-sep-afr-qp-d/801f2051-294e-4c42-84bb-3e2fcf153206) — QP · 2024 · Afr
- [Engineering Graphics & Design P1 Nov 2024 Afr](https://www.hlayiso.com/library/engineering-graphics-design-p1-nov-2024-afr/9e12f86e-1027-404b-a851-90f9217639a4) — QP · 2024 · Afr
- [Gr 12 EDG P2 (English) June 2024 Question Paper](https://www.hlayiso.com/library/gr-12-edg-p2-english-june-2024-question-paper/5258bc0e-6828-4661-a7e7-9553fbae9844) — QP · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
