# Engineering Graphics and Design Grade 11 P2 2018 QP (Eng)

> Grade 11 Engineering Graphics and Design Paper 2 question paper from the Eastern Cape November 2018 (English), 6 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/egd-p2-gr11-nov-2018-eng/5045e89d-e662-4312-9c05-154177649b7d
- Updated: 2026-09-27
- Subject: Engineering Graphics and Design
- Grade: Grade 11
- Document type: Question paper
- Year: 2018
- Exam period: Eastern Cape November
- Paper: 2
- Curriculum: CAPS
- Pages: 6

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 11](https://www.hlayiso.com/library/grade-11) › [Engineering Graphics and Design](https://www.hlayiso.com/library/grade-11/engineering-graphic-and-design) › [Engineering Graphics and Design Grade 11 P2 2018 QP (Eng)](https://www.hlayiso.com/library/egd-p2-gr11-nov-2018-eng/5045e89d-e662-4312-9c05-154177649b7d)

## About this document

Engineering Graphic And Design · Grade 11 · Eastern Cape November · 2018. Question paper, 6 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

ISEBE LEMFUNDO LEMPUMA KOLONI
EASTERN CAPE EDUCATION DEPARTMENT
OOS-KAAP ONDERWYSDEPARTEMENT

NATIONAL
SENIOR CERTIFICATE

ENGINEERING GRAPHICS AND DESIGN P2

NOVEMBER 2018

EXAMINATIONS

MARKS: 200

TIME: 3 hours

This question paper consists of 6 pages.

Copyright reserved

INSTRUCTIONS AND INFORMATION

The paper consists of FOUR questions
Answer ALL the questions.

All drawings must be drawn to scale 1 : 1, unless otherwise stated.

The questions must be answered on the answer sheets provided.

All the answers sheets must be re-stapled in numerical sequence and
handed in irrespective of whether the question was attempted or not.
Careful time management is essential in order to complete all the questions.
Print your name in the block provided on every answer sheet.

All answers must be drawn accurately and neatly.

Any details or dimensions not given must be estimated in good proportion.

geen

DONO

FOR OFFICIAL USE ONLY

na

1 |
2 |
3 |
4 |
TOTAL |
2/0/0]|

FINAL CONVERTED CHECKED BY

MARK

100

COMPLETE THE FOLLOWING:
NAME

NAME
EXAMINATION CENTRE

EXAMINATION CENTRE

Please turn over 1

### Page 2

Downloaded from hlayiso.com

Engineering Graphics and Design/P2 Nsc ECiNovember 2018

Pg QUESTION 1: ANALYTICAL (MECHANICAL)
Ce QUESTION 15 ]
mR Given:
1 A Multiple views of a pulley assembly, a title block and a table of questions. The
- ‘eS I; drawings have not been prepared to the indicated scale
3 Ces Instructions:
- = Complete the table below by neatly answering the questions, which all refer
4 to the accompanying drawings and the title block. [30]
pent
- A!
{B
7 /
8
« QUESTIONS ANSWERS
9 1 | On what date was the drawing checked? 1
10 2. | What is the name of the engineering firm? 1
3. | What indicated scale has been used? 1
4 | What treatment must the assembly undergo? 1
VIEW 2
5 | On what date was the bracket hole revised? 1
6 | What is the drawing number? 1
§8) 7 | What would view 1 be called? 1
/ 8 | What would view 2 be called? 1
9 | What roughness value is required on the machined surfaces? 1
10 | What type of section is shown at A? 1
11 | Atwhat angle is the hatching done? 1
12 | Name the feature at B 1
13 | Name the feature at C. 1
14 | Ifa dimension reads 18 on the drawing, what would be the true 2
size?
45 | Complete the given table, for question 15, by inserting the part names for each of the numbered | |
parts in View 1
16 | In the box below, draw, in neat freehand, the symbol for the projection system used. 4
TOTAL 30
VIEW 1 -
TITLE
PULLEY ASSEMBLY ALLDMENGONS ARE NMLLMETRES. | SOALETS ANSWER T6
72 CHURCH STREET | PROGRAMME: AUTOCAD 2008 MATERIAL: CAST IRON | 1. BRACKET HOLE 2018/05/13
REINSTEEL GRAAFF-REINET
6280 FILE NAME: T-SA FS AXLE.dwg QUANTITY: 9500 UNITS REVISIONS DATE
ENGINEERING www.aqua.co.za_ = =
‘B 049 898 2345 DRAWING No. RS 501 E TREATMENT: HARDEN DRAWN: REINCH 2018/04/10 EXAMINATION NUMBER
ALL DIMENSIONS ARE] ALL UNSPECIFIED. FINISH: REMOVE ALL BURRS 0,25 TURNED | CHECKED: KEITH 2018/05/15
IN MILLIMETRES. RADII ARE R3. AND SHARP EDGES APPROVED: SAULS 2018/05/22 SYMBOL EXAMINATION NUMBER I 2

Copyright reserved Please tum over

### Page 3

Downloaded from hlayiso.com

Engineering Graphics and Design/P2 Nsc ECiNovember 2018

DP QUESTION 2: LOCI (CAMS)

Given:

* The shaft and follower detail of a cam with the
follower shown at its lowest position

* The vertical centre line of the cam shaft as reference
on the drawing sheet

The specifications for the movement are as follows:

* The cam shaft rotates clockwise at uniform velocity

© — Over the first 60° the follower rises 20 mm

* There is a dwell period for the next 30°

© — Over the next 30° the follower rises a further 20 mm

© — Over the next 60° the follower rises a further 20 mm

* There is a dwell period for the next 45°

* Over the next 45° the follower falls 50% of the
displacement
There is a dwell period for the next 30°

* Over the final 60° the follower returns to its original

position

Instructions:

2.1. Draw, to scale 1 : 1, the given view of the cam shaft
and follower using the vertical centre line as
reference. The arrow indicating the direction of
rotation must be shown

2.2. Drawa displacement graph with a rotational scale of
30° equal 8 mm and a follower displacement scale
of 1: 1 for the given motion. Label the graph

2.3 Project and draw the cam profile that would generate
the given motion.

* Show ALL necessary construction. [33]
ASSESSMENT CRITERIA
1 GRAPH 4
= 2 FOLLOWER + SHAFT + 5
f 2 ARROW
O12, f 3 CONSTRUCTION 4
4 CAM POINTS: 7
‘CAM SHAFT AND FOLLOWER DETAIL.
5 CURVE + QUALITY 6
TOTAL 33

EXAMINATION NUMBER

EXAMINATION NUMBER 3
Copyright reserved Please tum over

### Page 4

Downloaded from hlayiso.com

Engineering Graphics and Design/P2

Nsc

ECiNovember 2018

Oe

QUESTION

: ISOMETRIC DRAWING

Given:
© The front view, top view and right view of a bracket
* The position of point S on the drawing sheet

Instructions:
Using scale 1 : 1, convert the orthographic views of the
bracket to an isometric drawing.

* Make S the lowest point of the drawing.
* Show ALL necessary construction.

* NO stencils may be used.

* NO hidden detail is required. [42]

T
1
i
|
80

64,

40

ASSESSMENT CRITERIA
PLACEMENT 2
2. BASE 185
3. HEXAGONAL PRISM 173
4. CIRCLE + CL 4
TOTAL 42

EXAMINATION NUMBER

EXAMINATION NUMBER [4

Copyright reserved

Please tum over

### Page 5

Downloaded from hlayiso.com

Engineering Graphics and Design/P2

Nsc

ECiNovember 2018

| 401

34,

EXPLODED ISOMETRIC DRAWING

[42]
34

PULLEY [5]

R3, | 95
SHAFT [1] s
/ 210
160" —
a2 —
224) BRACKET [2]
1 16
{tet 158
nay
b= 24 42 Ho > aie “e \

WASHER [6]

24

SPACER [3]

M24 NUT [7]

M24

QUESTION 4: MECHANICAL ASSEMBLY

Given:

* The exploded isometric drawing of the parts of a pulley
assembly, showing the position of each part relative to
all the others

* Orthographic views of each of the parts of the pulley
assembly

Instructions:

* Answer this question on page 6.

© Draw, to scale 1:1 and in third-angle orthographic
projection, the following views of the assembled parts
of the pulley assembly:

4.1 A sectional front view on cutting plane A-A, as
seen from the direction of the arrow shown on the
exploded isometric drawing. The cutting plane,
which passes through the vertical centre line of the
assembly, is shown on the right view of the bracket
(part 2). Use point Z as a reference point to start
the drawing

4.2 The right view

* ALL drawings must comply with the guidelines

contained in the SANS 10111.

NOTE:

* Show THREE faces of the M24 nut and ALL necessary
construction.

* NO hidden detail is required

Add the following features to the drawing:
* The cutting plane A-A

e Label the sectional view SECTION A-A. [95]
PARTS LIST
PART ‘QUANTITY MATERIAL
1. SHAFT 1 MILD STEEL
4. BUSH 1 BRONZE
™* PULLEY ASSEMBLY
ENGINEERING ‘www.aqua.co.za_
‘B 049 898 2345
ALL DIMENSIONS ARE ALL UNSPECIFIED

IN MILLIMETRES.

RADII ARE R3,

© Sg

Copyright reserved

Please tum over

### Page 6

Downloaded from hlayiso.com

Engineering Graphics and Design/P2 NSC EC/November 2018
ASSESSMENT CRITERIA
SECTIONAL FRONT VIEW
SHAET 113
BRACKET 14
SPACER 3
aust! 3
PULLEY 20
susrora, | 69
RIGHT VIEW
PULLEY 7
BRACKET 8
SUBTOTAL 26
TOTAL 95

EXAMINATION NUMBER

EXAMINATION NUMBER

Copyright reserved

## Related documents

- [EGD P2 Gr11 Nov 2018 Afr D](https://www.hlayiso.com/library/egd-p2-gr11-nov-2018-afr-d/4934112c-a2af-4f09-9162-a3f64da2ee1d) — Engineering Graphic and Design · QP · 2018 · Afr
- [EGD P2 Gr11 Nov 2018 Eng D](https://www.hlayiso.com/library/egd-p2-gr11-nov-2018-eng-d/814a3e75-6b77-4761-aae3-376c8bc07244) — Engineering Graphic and Design · QP · 2018 · Eng
- [EGD P2 Gr11 Nov 2018 Afr](https://www.hlayiso.com/library/egd-p2-gr11-nov-2018-afr/7852c88b-7c8e-48a4-8eef-af29a09405ee) — Engineering Graphic and Design · QP · 2018 · Afr
- [GR11 EGD P2 NOV 2020 QUESTIONPAPER](https://www.hlayiso.com/library/gr11-egd-p2-nov-2020-questionpaper/a88d243b-6377-4536-845b-80709134cf5e) — Engineering Graphic and Design · QP · 2020
- [EGD P2 Gr11 Nov 2019 AFR D](https://www.hlayiso.com/library/egd-p2-gr11-nov-2019-afr-d/450ae1e9-e7cc-4593-ad59-e30291f56347) — Engineering Graphic and Design · QP · 2019 · Afr
- [EGD P2 Gr11 Nov 2019 ENG D](https://www.hlayiso.com/library/egd-p2-gr11-nov-2019-eng-d/1323a954-d206-4372-8afa-44cfa741ea9f) — Engineering Graphic and Design · QP · 2019 · Eng

## More from Grade 11 Engineering Graphics and Design

- [Gr 11 EngGraph Des ATP 2023-24](https://www.hlayiso.com/library/gr-11-enggraph-des-atp-2023-24/6fbec59e-8df9-49dc-9042-1e84389c22fa) — ATP
- [EGD P1 GR11 MEMO NOV2022 Afr+Engl](https://www.hlayiso.com/library/egd-p1-gr11-memo-nov2022-afr-engl/dc8a6861-4564-49b7-9da7-af10cd3460f8) — Memo · 2022 · Afr
- [EGD P2 GR11 MEMO NOV2022 Afrikaans](https://www.hlayiso.com/library/egd-p2-gr11-memo-nov2022-afrikaans/085022c0-c1e2-44e3-8f13-b13c4d9661fd) — Memo · 2022 · Afr
- [EGD P2 GR11 MEMO NOV2022 English](https://www.hlayiso.com/library/egd-p2-gr11-memo-nov2022-english/50c4e044-b732-4d91-bcb3-e98c1bc8bfc1) — Memo · 2022 · Eng
- [EGD P1 GR11 MEMO NOV2022 Afr+Engl](https://www.hlayiso.com/library/grade-11-engineering-graphic-and-design-2022-exemplar-november-exam-memorandum-paper-1-english/9926f9cd-76bc-4eff-a287-c1394b665aaf) — Memo · 2022 · Eng
- [EGD P2 GR11 MEMO NOV2022 Afrikaans](https://www.hlayiso.com/library/grade-11-engineering-graphic-and-design-2022-exemplar-november-exam-memorandum-paper-2-afrikaans/964722fb-b9df-42a0-a525-cbab4bbad105) — Memo · 2022 · Afr

## Collection

- [Grade 11 past papers](https://www.hlayiso.com/grade-11/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.