# Engineering Graphics and Design Grade 11 P2 2019 QP (Eng)

> Grade 11 Engineering Graphics and Design Paper 2 question paper from the Eastern Cape November 2019 (English), 6 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/egd-p2-gr11-nov-2019-eng-d/1323a954-d206-4372-8afa-44cfa741ea9f
- Updated: 2026-09-27
- Subject: Engineering Graphics and Design
- Grade: Grade 11
- Document type: Question paper
- Year: 2019
- Exam period: Eastern Cape November
- Paper: 2
- Curriculum: CAPS
- Pages: 6

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 11](https://www.hlayiso.com/library/grade-11) › [Engineering Graphics and Design](https://www.hlayiso.com/library/grade-11/engineering-graphic-and-design) › [Engineering Graphics and Design Grade 11 P2 2019 QP (Eng)](https://www.hlayiso.com/library/egd-p2-gr11-nov-2019-eng-d/1323a954-d206-4372-8afa-44cfa741ea9f)

## About this document

Engineering Graphic And Design · Grade 11 · Eastern Cape November · 2019. Question paper, 6 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

*IGRDSE2*

### Page 2

conten Downloaded from hlayiso.com —

La y QUESTION 1: ANALYTICAL (MECHANICAL)
Oe
“
° 22 C'BORE Given:
/, 40x25 DEEP A detailed drawing of a seal bracket, a title block and a table of questions. The drawings have not been prepared to the

indicated scale.

R)
Instructions:
Rta Complete the table below by neatly answering the questions, which all refer to the accompanying drawings and the title
block. [28]
3 QUESTIONS ANSWERS
1 | On what date was the drawing approved? 1
2 | Who was the draughsman? 1
a 3. | What is the name of the engineering firm? 1
a/ x
af &
f 4 | Which indicated scale has been used? 1
L 6 HOLES M12~“
5 | How many seal brackets must be produced? 1
VIEW 2
SECTION R 6 | On what date was the size of the tapped holes revised? 1
110 7 | Whatis the file name? 1
8 | What is VIEW 1 called? 1
9 | What is the depth of the thread on a standard M12 nut? 2
y 10 | How many threaded holes are there on the seal bracket? 1
THT \ |
s Wt | | 11 | What type of section is Section R and T? 2
| * Wid | | 2
Hy Ww eS cey 12 | Name the feature at 1. 1
Ti eine, te
| t H S t H 13 |Name the feature at 2. 1
at !
paren . tl ih 14 | Name the feature at 3. 1
@ A
120 15 | Determine the total height of the seal bracket. 2
VIEW 1 16 | Determine the complete dimensions: A- B- Cc D- 4
a 17 | Determine the complete dimension at E 2
+
« 8 18 | In the box below, draw, in neat freehand, the symbol for the projection system used. 4
ALL UNDIMENSIONED RADII ARE R 6. Nx
ALL DIMENSIONS ARE IN MILLIMETRES. | SCALE: 1:5 -L [uta TOTAL | 28
PROGRAMME: AUTOCAD 2019 MATERIAL: CAST IRON ANSWER 18
FILE NAME: bi SECTION T
racket13.dwg QUANTITY: 9500 UNITS
DRAWING No. JM-08 TREATMENT: NONE
MILLING 2. ENLARGE TAPPED HOLES 2019/03/21 - -
DESIGNED FOR KM FOUNDRIES 15;
1. INSERT SUPPORTS. 2019/03/19
IG MA R 10 PETER STREET REVISIONS DATE
EAST LONDON
‘B® 431 123 9876 CHECKED: TINI 2019/04/16
‘SURNAME & INITIAL
TITLE s EAL B RAC KET APPROVED: THEO 2019/04/25
SURNAME & INITIAL 2

Copyright reserved Please tum over

### Page 3

Engineering Graphics and Design/P2

Downloaded from hlayiso.com —

QUESTION 2: LOCI
NOTE: Answer QUESTIONS 2.1 and 2.2.

2.1 AUGER
Given:

The incomplete front view and incomplete left view of an
auger.

Specifications:

© The outer diameter of the auger is 290 mm

© Pitch = 72 mm

© Direction: left-hand

* Starting point: left bottom as indicated by A

Instructions:

Using scale 1:1

* Copy and complete the given left view.

* Draw ONE AND A HALF turns of the auger around the
given shaft.

* Show ALL necessary construction [25]

—_ ASSESSMENT CRITERIA

1 | LEFT VIEW + CONSTRUCTION | 12

2 | AUGER + SHAFT 13

SUBTOTAL | 25

2.2 CAMS:

The specifications for the movement are as follows:
The cam rotates at uniform velocity

Over the first 60° the follower rises for 24 mm

There is a dwell period for the next 30°

Over the next 30° the follower rises a further 27 mm

Over the next 60° the follower rises a further 34 mm
There is a dwell period for the next 45°

Over the next 60° the follower decends 50% of the
displacement

There is a dwell period for the next 15°

Over the final 60° the follower retums to its original
position

Instructions:

* Draw, to scale 1 : 1, a displacement graph with a
rotational scale of 360° equal to 100 mm and a follower
displacement scale of 1 : 1 for the given motion.

* Label the graph

Show ALL necessary construction. [14]
ASSESSMENT CRITERIA
1 | CONSTRUCTION 3
2 | GRAPH + LABEL 11

SUBTOTAL 2.2| 14

SUBTOTAL 2.1| 25

TOTAL | 39
SURNAME & INITIAL

SURNAME & INITIAL 3

Copyright reserved

Please tum over

### Page 4

Engineering Graphics and Design/P2

Downloaded from hlayiso.com —

QUESTION 3: ISOMETRIC DRAWING

Given:
© The front view, top view and left view of a wall plate
The position of point A on the drawing sheet

Instructions:
Convert the orthographic views of the wall plate into an
isometric drawing.

* Make corner A the lowest point of the drawing.
* Show ALL necessary circle and other constructions.
* NO hidden detail is required [38]

80

64
TT
a) | & ‘|
L 4 Jo) LL __ | joa
8 zt
Lt
[1 5
[aj 44 | 18 AY
ASSESSMENT CRITERIA
1 | CONSTR’ + PLACEMENT 3
we 2. | ISOMETRIC LINES 7
3 | RIB 44
4 | HEXAGON 6
5 | CIRCLE 7
TOTAL| 38
‘SURNAME & INITIAL
SURNAME & INITIAL 4

Copyright reserved

Please tum over

### Page 5

Engineering Graphics and Design/P2

m EC/NOVEMBER 2019

ut |

Downloaded f

(Fel

rom hlayiso.co

100

On

100

Loe
“st x =
8 f=} T Os os
# ot ons
& 8
ai , ,
PIN min
M16 BOLT itis tu
[23] jaf 7
32
Pe TOP PLATE
@26

&
QD

WASHER

LI
20 |

EXPLODED ISOMETRIC DRAWING

al

GUIDE BLOCK

16

CAM LEVER

SLIDE BLOCK

joj 74

SECTION L-L

6,

Le

COVER PLATE

QUESTION 4: MECHANICAL ASSEMBLY

Given:

© The exploded isometric drawing of the parts of a drill jig
assembly, showing the position of each part relative to all
the others.

© Orthographic views of each of the parts of the drill jig
assembly.

* Starting point S on page 6.

Instructions:

* Answer this question on page 6.

© Draw, to scale 1:1 and in third-angle orthographic
projection, the following views of the assembled parts of
the drill jig assembly:

4.1 The sectional front view of the drill jig assembly, on
cutting plane T-T as seen from the direction of the
arrow shown on the exploded isometric drawing. The
cutting plane, that runs vertically through the centre of
the assembly, is shown on the top view of the base
(part 7)

4.2 A top view without any hidden detail.

* ALL drawings must comply with the guidelines contained

in the SANS 10111.

NOTE:

* Use point S as reference to position the parts.

© Planning of the layout of the views is important.

© Show, in the sectional front view, THREE faces of the
M16 bolt and ALL constructions.

* NO hidden detail is required.

Add the following features to the drawing:

* The cutting plane T-T. [95]
PARTS LIST
PARTS: (QUANTITY MATERIAL
1.PIN 2 MILD STEEL
2.16 BOLT 1 MILD STEEL
3. WASHER 1 MILD STEEL
4. GUIDE BUSH 1 MILD STEEL
5. TOP PLATE 1 CAST IRON
6. GUIDE BLOCK 1 CAST IRON
7. BASE 1 CAST IRON
8. CAM LEVER 1 CAST IRON
9. SLIDE BLOCK 1 CAST IRON
10. COVER PLATE 1 MILD STEEL
_ DRILL JIG
10 PETER STREET
JIG MAKERS EAST LONDON
ENGINEERING WORKS ane
FR 431 123 9876
ALLDIMENSIONS ARE| ALL UNSPECIFIED © e
IN MILLIMETRES. RADII ARE R3 EI

Copyright reserved

Please tum over

### Page 6

Engineering Graphics and Design/P2

EC/NOVEMBER 2019

Downloaded from hlayiso.com

ASSESSMENT CRITERIA
TOP VIEW
PIN 4
M16 BOLT + WASHER 53
GUIDE BUSH 2
TOP PLATE, 1
BASE 2
CAM LEVER 95
SLIDE BLOCK 3
COVER PLATE 2
CUTTING PLANE T-T 3
SUBTOTAL | 32
ASSESSMENT CRITERIA
SECTIONAL FRONT VIEW
M16 BOLT + WASHER 133
GUIDE BUSH 43
TOP PLATE 5
GUIDE BLOCK 2
BASE 6
CAM LEVER 103
SLIDE BLOCK 8
COVER PLATE 5
ASSEMBLY (9 parts) 8
SUBTOTAL | 63
TOTAL | 95

SURNAME & INITIAL

SURNAME & INITIAL [6

Copyright reserved

## Related documents

- [EGD P2 Gr11 Nov 2019 AFR D](https://www.hlayiso.com/library/egd-p2-gr11-nov-2019-afr-d/450ae1e9-e7cc-4593-ad59-e30291f56347) — Engineering Graphic and Design · QP · 2019 · Afr
- [EGD P2 Gr11 Nov 2019 Memo D](https://www.hlayiso.com/library/egd-p2-gr11-nov-2019-memo-d/e38d69fe-5265-484d-b6b4-ee574839480d) — Engineering Graphic and Design · Memo · 2019
- [EGD P1 GR 11 AFR QP D](https://www.hlayiso.com/library/egd-p1-gr-11-afr-qp-d/e9ec42ab-8882-4396-ac35-db3b33ac1526) — Engineering Graphic and Design · QP · 2019 · Afr
- [EGD P1 GR 11 ENG QP D](https://www.hlayiso.com/library/egd-p1-gr-11-eng-qp-d/8a128a62-efcd-4ce3-bd0a-0156883050db) — Engineering Graphic and Design · QP · 2019 · Eng
- [GR11 EGD P2 NOV 2020 QUESTIONPAPER](https://www.hlayiso.com/library/gr11-egd-p2-nov-2020-questionpaper/a88d243b-6377-4536-845b-80709134cf5e) — Engineering Graphic and Design · QP · 2020
- [EGD P2 Gr11 Nov 2018 Afr D](https://www.hlayiso.com/library/egd-p2-gr11-nov-2018-afr-d/4934112c-a2af-4f09-9162-a3f64da2ee1d) — Engineering Graphic and Design · QP · 2018 · Afr

## More from Grade 11 Engineering Graphics and Design

- [Gr 11 EngGraph Des ATP 2023-24](https://www.hlayiso.com/library/gr-11-enggraph-des-atp-2023-24/6fbec59e-8df9-49dc-9042-1e84389c22fa) — ATP
- [EGD P1 GR11 MEMO NOV2022 Afr+Engl](https://www.hlayiso.com/library/egd-p1-gr11-memo-nov2022-afr-engl/dc8a6861-4564-49b7-9da7-af10cd3460f8) — Memo · 2022 · Afr
- [EGD P2 GR11 MEMO NOV2022 Afrikaans](https://www.hlayiso.com/library/egd-p2-gr11-memo-nov2022-afrikaans/085022c0-c1e2-44e3-8f13-b13c4d9661fd) — Memo · 2022 · Afr
- [EGD P2 GR11 MEMO NOV2022 English](https://www.hlayiso.com/library/egd-p2-gr11-memo-nov2022-english/50c4e044-b732-4d91-bcb3-e98c1bc8bfc1) — Memo · 2022 · Eng
- [EGD P1 GR11 MEMO NOV2022 Afr+Engl](https://www.hlayiso.com/library/grade-11-engineering-graphic-and-design-2022-exemplar-november-exam-memorandum-paper-1-english/9926f9cd-76bc-4eff-a287-c1394b665aaf) — Memo · 2022 · Eng
- [EGD P2 GR11 MEMO NOV2022 Afrikaans](https://www.hlayiso.com/library/grade-11-engineering-graphic-and-design-2022-exemplar-november-exam-memorandum-paper-2-afrikaans/964722fb-b9df-42a0-a525-cbab4bbad105) — Memo · 2022 · Afr

## Collection

- [Grade 11 past papers](https://www.hlayiso.com/grade-11/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.