# Electrical Technology Grade 12 Eastern Cape Mock 2022 Memo

> Grade 12 Electrical Technology memorandum from the Eastern Cape Mock Exam 2022 (English), 13 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2022-digital-english/d9f4d172-a252-4eb9-b51b-6936353fe4e6
- Updated: 2026-09-27
- Subject: Electrical Technology
- Grade: Grade 12
- Language: English
- Document type: Memorandum
- Year: 2022
- Exam period: Eastern Cape Mock Exam
- Curriculum: CAPS
- Pages: 13

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Electrical Technology](https://www.hlayiso.com/library/grade-12/electrical-technology) › [Electrical Technology Grade 12 Eastern Cape Mock 2022 Memo](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2022-digital-english/d9f4d172-a252-4eb9-b51b-6936353fe4e6)

## About this document

Electrical Technology · Grade 12 · Eastern Cape Mock Exam · 2022 · English. Memorandum, 13 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                            NATIONAL
                       SENIOR CERTIFICATE

                                  GRADE 12

                        SEPTEMBER 2022

ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS
             MARKING GUIDELINE

MARKS:   200

                 This marking guideline consists of 13 pages.

### Page 2

Downloaded from hlayiso.com
2                    ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS                 EC/SEPTEMBER 2022)

 INSTRUCTIONS TO MARKERS

 1.    All questions with multiple answers imply that any relevant, acceptable answer
       should be considered.

 2.    Calculations

       2.1     All calculations must show the formulae.

       2.2     Substitution of values must be done correctly.

       2.3     All answers MUST contain the correct unit to be considered.

       2.4     Alternative methods must be considered, provided that the correct
               answer is obtained.

       2.5     Where an incorrect answer could be carried over to the next step, the first
               answer will be deemed incorrect. However, should the incorrect answer
               be carried over correctly, the marker has to re- calculate the values, using
               the incorrect answer from the first calculation. If correctly used, the
               candidate should receive the full marks for subsequent calculations.

       2.6     Markers should consider that candidates' answers may deviate slightly
               from the marking a guideline depending on how and where in the
               calculation rounding off was used.

 3.    These marking guidelines are only a guide with model answers.

 4.    Alternative interpretations must be considered and marked on merit. However,
       this principle should be applied consistently throughout the marking session at
       ALL marking centres.

Copyright reserved                                                                  Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2022)       ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS                          3

 QUESTION 1: MULTIPLE-CHOICE QUESTIONS

 1.1      A✓                                                                                (1)
 1.2      B✓                                                                                (1)
 1.3      A✓                                                                                (1)
 1.4      D✓                                                                                (1)
 1.5      C✓                                                                                (1)
 1.6      C✓                                                                                (1)
 1.7      A✓                                                                                (1)
 1.8      D✓                                                                                (1)
 1.9      B✓                                                                                (1)
 1.10     C✓                                                                                (1)
 1.11     D✓                                                                                (1)
 1.12     A✓                                                                                (1)
 1.13     D✓                                                                                (1)
 1.14     B✓                                                                                (1)
 1.15     A✓                                                                                 (1)
                                                                                            [15]

 QUESTION 2: OCCUPATIONAL HEALTH AND SAFETY

 2.1    An occurrence of catastrophic proportions, ✓resulting from the use of
        machinery, or activities at work. ✓                                                   (2)

 2.2    The learner does not know safe practices. ✓
        The learner knows better but intentionally conducts the act.                          (1)

 2.3    2.3.1    Running could cause you to trip or collide with another learner. ✓
                 This could result in you injuring yourself with nearby equipment or
                 machinery. ✓                                                                 (2)

        2.3.2    This could cause the outlet to exceed its rated current ✓ and could
                 lead to short circuits, fires or damaged appliances. ✓                       (2)

 2.4    First, I would define all the various threats to safety in the workshop. ✓
        Secondly, I would determine the extent of all the vulnerabilities in the
        workshop. ✓
        Finally, I would devise countermeasures should a risk occur. ✓                        (3)
                                                                                            [10]

Copyright reserved                                                               Please turn over

### Page 4

Downloaded from hlayiso.com
4                    ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS             EC/SEPTEMBER 2022)

QUESTION 3: SWITCHING CIRCUITS

3.1    3.1.1    • Two external inputs ✓
                • Two stable states ✓                                                        (2)

       3.1.2    The LED will be destroyed. ✓                                                 (1)

       3.1.3    The current flowing through the LED will not be limited. ✓ This will
                cause the LED to draw more current than what it is able to handle. ✓         (2)

       3.1.4    Pressing the SET button will pull Pin 2 ‘low’ ✓ and cause the IC output
                to switch to ‘high’. ✓ As Pin 6 is deliberately held ‘low’ the IC cannot
                reset itself thus staying ‘high’. ✓                                          (3)

       3.1.5    These resistors are known as ‘pull up’ resistors. ✓ When both SET and
                RESET buttons are open, the pull up resistors keep the voltage on the
                input high. ✓                                                                (2)

3.2

                                     RF ✓

                                   +15 V
                                 - ✓

                                 +
                                     -15 V                         R1✓
                                                                               V OUT ✓
                C✓

                                                                   R2 ✓

                                                                                             (6)

3.3    The feedback resistor is connected from the output ✓ of the op amp to the
       inverting input. ✓
       This allows a part of the output to flow back to the inverting input. ✓               (3)

3.4    It is used to eliminate switch bounce. ✓                                              (1)

Copyright reserved                                                              Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2022)          ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS                       5

3.5    • A light dependent resistor (LDR) and a 100 kΩ resistor is connected in
         series. This forms a voltage divider. ✓
       • The voltage divider feeds the non-inverting input of the op-amp. ✓
       • The inverting input is fed by a 100 kΩ variable resistor. ✓
       • Less light on the LDR the resistance rises and in turn the voltage on the
         non-inverting also rises. ✓
       • When the voltage level increases to a level higher than the level set by the
         variable resistor, op amp output will go high immediately. ✓
       • This will switch the transistor on, and the alarm will be energised. ✓              (6)

3.6                                                VOUT✓

                                                                +10 V✓

                                 -1 V✓                            VIN✓
                                                              +1 V✓

                               -10 V✓
                                                                                             (6)

3.7
                                           ✓                   ✓

                                  ✓                   ✓
                                                                                             (4)

3.8    3.8.1    A summing amplifier is used to add two or more different input
                signals ✓ to create one amplified output signal. ✓                           (2)

       3.8.2          VOUT = − (V1 + V2 + V3 ) ✓
                           = −(0,5 + 1,2 + 0,9) ✓
                           = − 2,6 V ✓

                                                              OR

                                 𝑅        𝑅           𝑅
                𝑉𝑂𝑈𝑇 = − (𝑉1 𝑅𝐹 + 𝑉2 𝑅𝐹 + 𝑉3 𝑅𝐹) 𝑉 ✓
                                     1        2           3
                                 20 000           20 000       20 000
                𝑉𝑂𝑈𝑇 = − (0,5 20 000 + 1,2 20 000 + 0,9 20 000 𝑉 ✓
                𝑉𝑂𝑈𝑇 = − 2,6 𝑉 ✓                                                             (3)

       3.8.3                     𝑅        𝑅           𝑅
                𝑉𝑂𝑈𝑇 = − (𝑉1 𝑅𝐹 + 𝑉2 𝑅𝐹 + 𝑉3 𝑅𝐹) 𝑉 ✓
                                     1        2           3
                                 40 000           40 000       40 000
                𝑉𝑂𝑈𝑇 = − (0,5 5 000 + 1,2 10 000 + 0,9 20 000 𝑉 ✓
                𝑉𝑂𝑈𝑇 = − 10,6 𝑉 ✓                                                            (3)

Copyright reserved                                                               Please turn over

### Page 6

Downloaded from hlayiso.com
6                    ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS             EC/SEPTEMBER 2022)

         3.8.4                            𝑅        𝑅           𝑅
                     𝑉𝑂𝑈𝑇 = − (𝑉1 𝑅𝐹 + 𝑉2 𝑅𝐹 + 𝑉3 𝑅𝐹) 𝑉 ✓
                                              1        2           3
                             −𝑉𝑂𝑈𝑇
                     𝑅𝐹 = 𝑉1      𝑉  𝑉
                                 + 2+ 3
                            𝑅1    𝑅2 𝑅3
                                    −10,4
                     𝑅𝐹 =     0,5    1,2    0,9    ✓
                                  +      +
                            20 000 20 000 20 000
                     𝑅𝐹 = 80 𝑘Ω ✓

                                                                       OR

                            𝑅𝐹
                     𝐴𝑉 = −
                            𝑅𝐼𝑁
                     𝑅𝐹 = 𝐴𝑉 × 𝑅𝐼𝑁 Ω
                     𝑅𝐹 = 4 × 20 000 Ω
                     𝑅𝐹 = 80 000 Ω
                     𝑅𝐹 = 80 𝑘Ω                                                              (3)

         3.8.5                V     
                     A V = −  OUT 
                               VIN 
                                   VOUT     
                         = −                           ✓
                               V1 + V2 + V3 
                                   5,2       
                         = −                 
                             0,5 + 1,2 + 0,9  ✓
                         =− 2
                                                ✓                                            (3)
                                                                                            [50]

Copyright reserved                                                             Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2022)           ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS                          7

 QUESTION 4: SEMICONDUCTOR DEVICES

 4.1      •    Infinite gain ✓
          •    Infinite input impedance ✓
          •    Zero output impedance ✓
          •    Infinite Bandwidth ✓
          •    Infinite common mode rejection ratio
          •    Unconditional stability                                          (Any 4 x 1)       (4)

 4.2      4.2.1                𝑅𝐹
                      𝐴𝑉 = 1 +     ✓
                               𝑅𝐼𝑁
                               50 000
                      𝐴𝑉 = 1 +        ✓
                               10 000
                      𝐴𝑉 = 6 ✓                                                                    (3)

          4.2.2                         𝑅𝐹
                      𝑉𝑂𝑈𝑇 = 𝑉𝐼𝑁 × (1 +     ) 𝑉✓
                                        𝑅𝐼𝑁
                                        50 000
                      𝑉𝑂𝑈𝑇 = 1,5 × (1 +        ) 𝑉✓
                                        10 000
                      𝑉𝑂𝑈𝑇 = 9 𝑉 ✓                                                                (3)

          4.2.3       If the value of the feedback resistor is decreased the gain of the
                      amplifier will decrease ✓ causing the output voltage to decrease.
                      ✓                                                                           (2)

  4.3     4.3.1       This pin sets the voltage at which the 555 IC will trigger. It is used
                      to maintain ✓ the voltage across the timing capacitor ✓ which is
                      discharged through pin 7. ✓                                                 (3)

          4.3.2       The 555 IC can operate from power supply voltages of between
                      +5 V ✓ and +18 V. ✓                                                         (2)

          4.3.3       In this mode the 555 timer is astable ('free running'), therefore its
                      output will continuously toggle between HIGH and LOW ✓ thus
                      generating a continuous train of square-wave pulses. ✓                      (2)

          4.3.4       The pin closest to the dot. ✓
                      The pin to the left of the notch.                         (Any 1 x 1)      (1)
                                                                                                [20]

Copyright reserved                                                                   Please turn over

### Page 8

Downloaded from hlayiso.com
8                     ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS        EC/SEPTEMBER 2022)

 QUESTION 5: DIGITAL AND SEQUENTIAL DEVICES

 5.1      • Liquid crystal display (LCD) ✓
          • Light emitting diode (LED) ✓                                                (2)

 5.2      Current sinking ✓ digital output ✓                                            (2)

 5.3      5.3.1         Decoder ✓                                                       (1)

          5.3.2
                            INPUTS                 OUTPUTS
                           A         B     0       1       2       3
                           0         0     1       0       0       0
                           0         1     0       1       0     0
                           1         0     0       0       1       0 
                           1         1     0       0       0       1                  (3)

 5.4
             CIN
                                                                   SUM

               A
                                                                   CO
               B

                  CIN
                                          =1                       SUM

                  A
                                           &                       CO
                  B            =𝟏                           ≥1

                               &
                                                                                         (8)

Copyright reserved                                                         Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2022)          ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS                           9

 5.5

                                      S

                                            1       1        0        0

                                           0         1       1        0
                                     R
                                     Q

                                            ✓        ✓       ✓         ✓

                                     ̅
                                     𝑸

                                                                                                (4)

 5.6      5.6.1       D-Type Latch ✓
                      D Flip-Flop                                                               (1)

          5.6.2       In this circuit the R input has been replaced by the compliment
                      (inversion) of the S input. ✓ The S input has been renamed to D
                      input. ✓ If the clock input is low, the D-Latch will not respond to
                      an input signal. ✓ Once the clock input goes high the output will
                      follow the D input. As the second input is always the inverse of
                      the D input there will thus never be an illegal state. ✓                  (4)

          5.6.3       • Shift Registers ✓
                      • Storage Registers ✓                                                     (2)

 5.7      5.7.1       •   The Q output of each flip-flop serves as an output sensing
                          point. ✓
                      •   If sensed together, these three points produce a binary
                          code ✓ of the circuit’s count sequence ✓ and this converts
                          directly into the decimal equivalent. ✓
                      •   J and K inputs of all three flip-flops are connected to a
                          permanent high to ensure the sensing together. ✓
                      •   The clock pulse fed into the first flip-flop will be transferred
                          to the next flip-flop via the 𝑄̅ output. ✓
                      •   Due to the clock pulse for the next flip-flop been fed from the
                          𝑄̅ output of the previous flip-flop, there will be a delay in the
                          output pulses. ✓
                      •   This is called propagation delay. ✓                                   (8)

Copyright reserved                                                                   Please turn over

### Page 10

Downloaded from hlayiso.com
10                   ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS                  EC/SEPTEMBER 2022)

       5.7.2    These are called asynchronous as they are not triggered at the same
                time ✓ therefore, the outputs will not change at the same time. ✓               (2)

       5.7.3    1 + 2 + 4 = 7 ✓✓✓                                                               (3)

       5.7.4    The 𝑄̅ output of the first flip-flop ✓ feeds the clock pulse input of the
                next flip-flop. ✓                                                               (2)

5.8    5.8.1    A – Serial data in ✓
                B – Clock ✓                                                                     (2)

       5.8.2    The bits are loaded into the register one bit at a time ✓ usually from the
                left, ✓ moving the data from one flip-flop to the next flip flop ✓ for every
                clock pulse. ✓ This register will require 4 clock pulses to shift four bits
                in and 4 clock pulses to shift four bits out of the register. ✓

                For example, a four-bit number such as 1111 will need four clock pulses
                to be loaded into the register and another four clock pulses for the
                number to move out in a serial manner.                                          (5)

5.9    Combinational logic circuits use AND, OR and NOT gates (logic gates) ✓ as
       their basic elements.
       Sequential logic circuits rely on the flip-flop ✓ as its basic building elements         (2)

5.10 Serial-in: Parallel-out shift register (SIPO) ✓
     Parallel-in: Serial-out shift Register (PISO) ✓
     Parallel-in: Parallel-out shift Register (PIPO)                                            (2)

5.11 Truncated counter will stop ✓ before reaching its maximum count. ✓                         (2)
                                                                                               [55]

Copyright reserved                                                                 Please turn over

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2022)           ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS                    11

QUESTION 6: MICROCONTROLLERS

6.1     6.1.1    Microcontroller ✓                                                           (1)

        6.1.2    RAM (Random Access memory) ✓                                                (1)

        6.1.3    Read Only Memory ✓                                                          (1)

        6.1.4    This is a fast, temporary memory that allows information to be stored
                 ✓ and retrieved by the system as it operates. ✓                             (2)

6.2     6.2.1    Discrete logic consists of a single processor ✓ with many separate
                 logic chips. ✓                                                              (2)

        6.2.2    Integrated logic consists of the entire processor ✓ on a single chip. ✓     (2)

6.3     6.3.1        •    Memory Address Register (MAR) ✓
                     •    Memory Data Register (MDR)
                     •    Current Instruction Register (CIR)
                     •    Program counter                                     (Any 1 x 1)    (1)

        6.3.2    The accumulator stores data ✓ that is needed for any arithmetic
                 operation. ✓                                                                (2)

6.4     6.4.1    It is used to pass information, data and instructions ✓ between the
                 respective parts of the microcontroller ✓ as well as to communicate
                 with the outside world through input and output ports. ✓                    (3)

        6.4.2        •    Control bus ✓
                     •    Data bus ✓
                     •    Address bus ✓                                                      (3)

        6.4.3        •    Supports a higher data transfer rate. ✓
                     •    The sender and the receiver use the same clock pulse. ✓            (2)

        6.4.4        •    Requires more communication lines. ✓
                     •    Requires more space. ✓
                     •    Requires larger connections.                                       (2)

6.5     6.5.1    -200 V = 1 ✓
                 200 mV = 0 ✓                                                                (2)

        6.5.2    •       To connect the following to the main frame:
                 •       Point of sale terminals ✓
                 •       Metering instruments ✓
                 •       Large special automated machines ✓                                  (3)

        6.5.3    Simplex data communication is where all data and information travels
                 in only one direction ✓ from transmitter to receiver. ✓
                 Half duplex communication is where the two devices take turn in
                 communicating, ✓ one after the other. ✓                                     (4)

Copyright reserved                                                              Please turn over

### Page 12

Downloaded from hlayiso.com
12                   ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS               EC/SEPTEMBER 2022)

6.6     6.6.1    An algorithm is a detailed step by step set of instructions ✓ to complete
                 a task, ✓ where a program is a sequence of instructions ✓ that tell a
                 computer how to complete a task. ✓                                          (4)

        6.6.2    Looping allows for a task ✓ to be repeated over and over. ✓                 (2)

6.7      6.7.1   This symbol indicates the decision point ✓ between two paths in a
                 flow chart. ✓                                                               (2)

         6.7.2   A terminator symbol will be used in the start or end of a flow chart. ✓     (1)

Copyright reserved                                                              Please turn over

### Page 13

Downloaded from hlayiso.com
(EC/SEPTEMBER 2022)      ELECTRICAL TECHNOLOGY: DIGITAL ELECTRONICS                     13

  6.8
                                 START

                                          SWITCH
                             ✓                ✓
                                  LED
                                 ON/OFF
                                              NO
                                    YES
                                              CHOOSE THE TIME
                                 LONG/          FOR LED ON
                                 SHORT
                                          ✓

                                                                 LED ON
                                     LED ON                     POSITION 2

                                 HIGH D       ✓          HIGH D
                                                                      ✓

                                 WAIT 5       ✓          WAIT 2       ✓

                                     LED OFF
                                                  ✓
                                 OUTPUT

                                 LOW B
                                              ✓

                       YES                ✓
                                 REPEAT

                             NO

                                  STOP
                                                                                          (10)
                                                                                          [50]

                                                                             TOTAL:       200

Copyright reserved                                                           Please turn over

## Related documents

- [ELEC TECH GR12 MEMO SEPT2022 Power English](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2022-power-english-1/1304f4fd-377a-40b4-8abd-4e3860f4fd0d) — Electrical Technology · Memo · 2022 · Eng
- [ELEC TECH GR12 MEMO SEPT2022 Electronics English](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2022-electronics-english/8e5f2a9b-1a0d-480e-8c17-93268b5cebfe) — Electrical Technology · Memo · 2022 · Eng
- [ELEC TECH GR12 QP SEPT2022 Power English](https://www.hlayiso.com/library/elec-tech-gr12-qp-sept2022-power-english/5dde0506-b8db-4a28-a65d-02c30160901e) — Electrical Technology · QP · 2022 · Eng
- [ELEC TECH GR12 QP SEPT2022 Digital English](https://www.hlayiso.com/library/elec-tech-gr12-qp-sept2022-digital-english/924ce4d5-b0c3-4149-a3f9-e96ddcf13df1) — Electrical Technology · QP · 2022 · Eng
- [ELEC TECH MEMO SEPT2023 Digital English](https://www.hlayiso.com/library/elec-tech-memo-sept2023-digital-english/1d2b04e7-c486-4f4e-9494-b0ccbcaf2ebb) — Electrical Technology · Memo · 2023 · Eng
- [ELEC TECH MEMO SEPT2023 Electronics English](https://www.hlayiso.com/library/elec-tech-memo-sept2023-electronics-english/5630ca3e-e352-4f96-81d0-64ec0103c0e9) — Electrical Technology · Memo · 2023 · Eng

## More from Grade 12 Electrical Technology

- [Gr 12 Dig Elec ATP 2023-24](https://www.hlayiso.com/library/gr-12-dig-elec-atp-2023-24/8d3b2ee7-1d14-498d-a86b-d9fc34674531) — ATP
- [Electrical Technology (Power Systems) (English) June 2025 Question Paper](https://www.hlayiso.com/library/electrical-technology-power-systems-english-june-2025-question-paper/5422e67a-03a4-4202-ba9b-1b9ec9872537) — QP · 2025 · Eng
- [ELEC TECH GR12 QP SEPT2024 Digital English](https://www.hlayiso.com/library/elec-tech-gr12-qp-sept2024-digital-english/9fcfef2b-6d5e-4601-853a-24a2a3993617) — QP · 2024 · Eng
- [Electrical Technology Nov 2024 (Electronics) Eng](https://www.hlayiso.com/library/electrical-technology-nov-2024-electronics-eng/870e3d22-85e9-42bd-890f-3ef1fd3333cf) — QP · 2024 · Eng
- [Electrical Technology Nov 2024 (Electronics) Afr](https://www.hlayiso.com/library/electrical-technology-nov-2024-electronics-afr/98972424-ba56-4bbc-a319-fdfc1fec40f8) — QP · 2024 · Afr
- [Electrical Technology Nov 2024 (Power Systems) Afr](https://www.hlayiso.com/library/electrical-technology-nov-2024-power-systems-afr/5f2b4850-fffb-4024-8f24-d74bd8677a25) — QP · 2024 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
