# Electrical Technology Grade 12 Eastern Cape Prelim 2024 Memo

> Grade 12 Electrical Technology memorandum from the Eastern Cape Prelim Exam 2024 (English), 13 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2024-electronics-english/c80784c8-a9c8-49f8-b740-a29558fe2de9
- Updated: 2026-09-27
- Subject: Electrical Technology
- Grade: Grade 12
- Language: English
- Document type: Memorandum
- Year: 2024
- Exam period: Eastern Cape Prelim Exam
- Curriculum: CAPS
- Pages: 13

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Electrical Technology](https://www.hlayiso.com/library/grade-12/electrical-technology) › [Electrical Technology Grade 12 Eastern Cape Prelim 2024 Memo](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2024-electronics-english/c80784c8-a9c8-49f8-b740-a29558fe2de9)

## About this document

Electrical Technology · Grade 12 · Eastern Cape Prelim Exam · 2024 · English. Memorandum, 13 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                           NATIONAL
                      SENIOR CERTIFICATE

                              GRADE 12

                       SEPTEMBER 2024

    ELECTRICAL TECHNOLOGY: ELECTRONICS
             MARKING GUIDELINE

MARKS:   200

                 This marking guideline consists of 13 pages.

                     Hosted by www.ecexams.co.za.

### Page 2

Downloaded from hlayiso.com
 2                       ELECTRICAL TECHNOLOGY: ELECTRONICS                (EC/SEPTEMBER 2024)

 INSTRUCTIONS TO MARKERS

 1.     All calculations with multiple answers imply that any relevant, acceptable
        answer should be considered.

 2.     Calculations:

        2.1     All calculations must show the formulae.

        2.2     Substitution of values must be done correctly.

        2.3     All answers MUST contain the correct unit to be considered.

        2.4     Alternative methods must be considered, provided that the correct
                answer is obtained.

        2.5     Where an incorrect answer could be carried over to the next step,
                the first answer will be deemed incorrect. However, should the
                incorrect answer be carried over correctly, the marker has to re-
                calculate the values, using the incorrect answer from the first
                calculation. If correctly used, the candidate should receive the full
                marks for subsequent calculations.

        2.6     Markers should consider that learners answers may deviate slightly
                from the marking guideline depending on how and where in the
                calculation rounding off was used.

 3.     These marking guidelines are only a guide with model answers.

 4.     Alternative interpretations must be considered and marked on merit.
        However, this principle should be applied consistently throughout the
        marking session at ALL marking centres.

Copyright reserved                                                              Please turn over

                            Hosted by www.ecexams.co.za.

### Page 3

Downloaded from hlayiso.com
 (EC/SEPTEMBER 2024)   ELECTRICAL TECHNOLOGY: ELECTRONICS                3

 QUESTION 1: MULTIPLE-CHOICE QUESTIONS

 1.1      A✓                                                           (1)

 1.2      C✓                                                           (1)

 1.3      C✓                                                           (1)

 1.4      B✓                                                           (1)

 1.5      A✓                                                           (1)

 1.6      C✓                                                           (1)

 1.7      B✓                                                           (1)

 1.8      A✓                                                           (1)

 1.9      C✓                                                           (1)

 1.10     C✓                                                           (1)

 1.11     B✓                                                           (1)

 1.12     D✓                                                           (1)

 1.13     C✓                                                           (1)

 1.14     A✓                                                           (1)

 1.15     B✓                                                           (1)
                                                                      [15]

Copyright reserved                                          Please turn over

                         Hosted by www.ecexams.co.za.

### Page 4

Downloaded from hlayiso.com
 4                       ELECTRICAL TECHNOLOGY: ELECTRONICS                (EC/SEPTEMBER 2024)

 QUESTION 2: OCCUPATIONAL HEALTH AND SAFETY

 2.1    Teamwork helps a team to meet its goals and deliver quality work. ✓
        Employees who are good in teamwork, respect their peers and help where
        they can, making collaborations go smoother. ✓                                     (2)

 2.2    When a learner is involved in horseplay in a workshop, the learner is
        intentionally conducting an unsafe act, ✓ which could lead to the injury or
        death of someone, as well as the possibility of damage to machinery and/or
        equipment. ✓                                                                       (2)

 2.3    •    Poor ventilation. ✓
        •    Poor lighting.
        •    Faulty tools or equipment.
        •    Poor housekeeping.                                          (Any 1 x 1)       (1)

 2.4     •   Your right to earn a living wage. ✓
         •   Your right to work reasonable hours.
         •   Your right to fair labour practices.
         •   Your right to belong to a trade union.
         •   Your right not to be discriminated against because of your sex, religion
             language, disability, or race.                              (Any 1 x 1)       (1)

 2.5     •   The use (or misuse) of power tools. ✓
         •   The incorrect use and handling of hand tools. ✓
         •   The etching of printed circuit boards.                      (Any 2 x 1)       (2)

 2.6    In quantitative risk analysis, an attempt is made to numerically determine
        the probabilities of various adverse events ✓ and the likely extent of the
        losses if a particular event takes place. ✓                                        (2)
                                                                                          [10]

Copyright reserved                                                              Please turn over

                           Hosted by www.ecexams.co.za.

### Page 5

Downloaded from hlayiso.com
 (EC/SEPTEMBER 2024)          ELECTRICAL TECHNOLOGY: ELECTRONICS                            5

 QUESTION 3: RLC CIRCUITS
 3.1   3.1.1    The shift in phase between the supply voltage and the circuit current
                ✓ within a complex circuit with reactances and resistances.✓                (2)
       3.1.2    The increase in amplitude of an oscillation in a mechanical or
                electrical system, ✓ under the influence of an external periodic
                impulse of similar frequency to the original vibration. ✓                   (2)
 3.2    •   The frequency. ✓
        •   The capacitance of the capacitor. ✓                                             (2)
 3.3   The resistance will remain constant ✓, therefore the current and voltage will
       remain in phase, regardless of the change of frequency. ✓                            (2)
 3.4   XL = XC. ✓
       IT is at a maximum. ✓
       Z = R. ✓
       Phase angle is 0˚.                                                                   (3)
 3.5   3.5.1                 1
                𝑓𝑟 = 2×π×√L×C          Hz ✓

                                       1
                𝑓𝑟 =                                   Hz ✓
                        2 × π × √80×10−3 × 33 × 10−6

                     ƒr = 97,95 Hz ✓                                                        (3)
       3.5.2    I = VT       (Z = R at resonance) ✓
                     Z

                I = 120 A ✓
                     30
                I=4A ✓                                                                      (3)
       3.5.3    VL = I x X L x V ✓
                VL = 4 x 49,24 V ✓
                VL = 196,94 V ✓                                                             (3)
 3.6   3.6.1    XL = VS Ω ✓
                     IL
                     100
                XL = 2 Ω ✓

                XL = 50 Ω ✓                                                                 (3)
       3.6.2    XC = VS Ω ✓
                     IC
                      100
                XC = 6 Ω ✓
                XC = 16,67 Ω ✓                                                              (3)
       3.6.3
                IT = √IR 2 + (IC − IL )2 A ✓
                IT = √52 + (6 − 2)2 A ✓
                IT = 6,4 A ✓                                                                (3)

Copyright reserved                                                             Please turn over

                                 Hosted by www.ecexams.co.za.

### Page 6

Downloaded from hlayiso.com
 6                        ELECTRICAL TECHNOLOGY: ELECTRONICS   (EC/SEPTEMBER 2024)

 3.7   3.7.1
                IT = √IR 2 + (IC − IL )2 A ✓
                IT = √62 + (3 − 4)2 A ✓
                IT = 6,083 A ✓                                                 (3)

       3.7.2    Cos θ = IR ✓
                          IT
                θ = Cos IR
                        -1

                             IT
                θ = Cos -1 __6__    ✓
                            6,083

                θ = 9,59° ✓                                                   (3)
                                                                             [35]

Copyright reserved                                                 Please turn over

                              Hosted by www.ecexams.co.za.

### Page 7

Downloaded from hlayiso.com
 (EC/SEPTEMBER 2024)          ELECTRICAL TECHNOLOGY: ELECTRONICS                             7

 QUESTION 4: SEMICONDUCTOR DEVICES

 4.1    Field Effect Transistor ✓                                                          (1)

 4.2    For its operation it makes use of only one charge carrier at a time, ✓ either
        electrons or holes, but not both. ✓                                                (2)

 4.3    4.3.1    Source ✓                                                                  (1)

        4.3.2    Gate ✓                                                                    (1)

        4.3.3    Output ✓                                                                  (1)

        4.3.4    Channel ✓                                                                 (1)

 4.4    MOSFET ✓                                                                           (1)

 4.5    An op-amp requires both a positive as well as a negative supply voltage to
        operate. ✓ A split power supply, or double-polarity voltage supply, provides
        a positive supply ✓ and a negative supply ✓ with relation to 0 V. ✓                (4)

 4.6                    𝑅
         Vout = Vin (– 𝑅 𝑓 ) V ✓
                         𝑖𝑛
                         𝑓    𝑅
        8,5 = 10 mV (– 180𝛺 )✓

        Rƒ = 153 kΩ ✓

        NOTE: The negative sign can be omitted as it is resistance.                        (3)

  4.7   4.7.1    Non-inverting op-amp. ✓                                                   (1)

        4.7.2                        𝑅
                 Vout = Vin (1 + 𝑅 𝑓 ) V✓
                                     𝑖𝑛
                                            33 𝑘Ω
                 4,275 V = 150 mV(1 + 𝑅            )✓
                                              𝑖𝑛

                     Rin = 1k2 ✓                                                           (3)

 4.8     •   The output of an op-amp is proportional to the difference of the
             inputs. ✓
         •   When the inputs are identical the output voltage is zero. ✓
         •   This is known as a common-mode signal. ✓
         •   The ability of an op-amp to suppress these signals are known as its
             common-mode rejection ratio. ✓                                                (4)

 4.9     •   The output is fed back 100% to the inverting input. ✓
         •   This cancels out all the gain of the op-amp and leaves it with a gain of
             1 (unit). ✓
         •   This makes this circuit ideal to be used as a coupling stage (buffer)
             between two unevenly matched stages, without them been directly
             connected to each other. ✓                                                   (3)

Copyright reserved                                                              Please turn over

                                  Hosted by www.ecexams.co.za.

### Page 8

Downloaded from hlayiso.com
 8                       ELECTRICAL TECHNOLOGY: ELECTRONICS                 (EC/SEPTEMBER 2024)

 4.10    • It is an active low trigger. ✓
                                                  1
         • When the voltage on Pin 2 is less than 3 of the supply voltage, the
           output goes high. ✓
                                                    2
         • When the voltage on Pin 2 is larger than 3 of the supply voltage, the
           output will immediately go low. ✓                                                  (3)

 4.11    • This circuit compares the voltages at its inputs. ✓
         • Depending on the difference between the input voltages, the output will
           either go high or low. ✓
         • If the non-inverting (+) terminal voltage is higher, the output will remain
           high. ✓
         • If the inverting (-) terminal voltage is higher, the output will change to
           low.✓                                                                              (4)

 4.12    • The three 5 kΩ resistors form a voltage divider network between the
           supply pin and ground. ✓
                                                               2
         • The first 5 kΩ resistor will give a voltage drop of 3 of the supply voltage
           to the first comparator ✓, which compares this input to the threshold
                                                                              2
           voltage and to trigger the 555 as the charging voltage reaches 3 of the
           supply. ✓
         • The lower voltage is compared against the trigger voltage by the second
           comparator. ✓                                                                      (4)

 4.13 •     When the unijunction transistor is connected to a voltage supply, a
            voltage drop will develop across the length of the component. ✓
        •   Two voltage drops are distinguished, namely the voltage drop across
            base 1 and the emitter, and the voltage drop across the emitter and
            base 2. ✓
        •   The voltage drops across the emitter and base 2 is known as the
            specific voltage. ✓
        •   When an external voltage that exceeds the specific voltage is applied to
            the component's emitter. ✓
        •   The internal resistance of the component will drop very quickly. ✓
        •   The component will start conducting between base 1 and base 2. ✓
        •   When the emitter voltage is removed, the internal resistance of the
            component will increase very quickly. ✓
        •   The component will react like an open switch. ✓                                  (8)
                                                                                            [45]

Copyright reserved                                                               Please turn over

                            Hosted by www.ecexams.co.za.

### Page 9

Downloaded from hlayiso.com
 (EC/SEPTEMBER 2024)        ELECTRICAL TECHNOLOGY: ELECTRONICS                                  9

 QUESTION 5: SWITCHING CIRCUITS

 5.1    5.1.1    It has TWO ✓ external inputs and TWO ✓ stable states.                              (2)

        5.1.2    It has ONE ✓ external input and ONE ✓ stable state.                                (2)

        5.1.3    It has NO ✓ external inputs and NO ✓ stable states.                                (2)

 5.2    It is used to eliminate switch bounce. ✓                                                    (1)

 5.3    When a switch is closed, the contacts never simply connect cleanly. ✓
        Instead, it will be gently springing up and down until it finally settles. ✓                (2)

 5.4    It will be a continuous train of square waves. ✓                                            (1)

 5.5    The time lag ✓ between cause and effect. ✓                                                  (2)

 5.6     •   It is widely used in the first stages of radio receivers ✓, where it is used to
             ‘clean up’ a signal which was distorted during transmission. ✓
         •   It is used in digital circuitry, ✓where noise is often introduced to the circuit
             by switch bounce which can cause a number of unwanted voltage spikes,
             to eliminate these spikes. ✓
         •   It is used to change the input waveform, ✓ for instance, a sine wave can
             be changed to a square or rectangular wave. ✓
         •   It is used to recover severely distorted signals ✓ and in the process
             eliminate high level spikes. ✓                                                         (8)

 5.7    5.7.1    Inverting summing amplifier. ✓
                 Marker’s Note: If learner only writes summing amplifier, 1 point is also
                 awarded.                                                                           (1)

        5.7.2    By adding an additional resistor in parallel to the current resistors. ✓           (1)

        5.7.3                  𝑅          𝑅       𝑅
                 Vout ═ − (𝑉1 𝑅𝑓 + 𝑉2 𝑅𝑓 + 𝑉3 𝑅𝑓 ) V ✓
                                   1          2       3
                                       100 𝑘Ω             100 𝑘Ω    100 𝑘Ω
                 Vout ═ − (50 𝑚𝑉 5 𝑘Ω + 150 𝑚𝑉 10 𝑘Ω + 300 𝑚𝑉 15 𝑘Ω ) V ✓
                 Vout ═ − (1 + 1,5 + 2) V
                 Vout ═ − 4,5 V ✓                                                                   (3)

        5.7.4    •     The input resistors are connected to the negative input terminal of
                       the op-amp. ✓
                 •     This is the inverting input and will render a negative answer. ✓             (2)

Copyright reserved                                                                 Please turn over

                              Hosted by www.ecexams.co.za.

### Page 10

Downloaded from hlayiso.com
 10                     ELECTRICAL TECHNOLOGY: ELECTRONICS               (EC/SEPTEMBER 2024)

 5.8
                                                     ✓

                                ✓

                                     ✓

                                                     ✓

        Marker’s Note:
        One mark for Feedback resistor.
        One mark for input capacitor on correct input.
        One mark for op-amp symbol correct.
        One mark for both supply voltages correct and connected correctly.                     (4)

 5.9

                                                 ✓

                                                                                               (8)

 5.10   Change the value of the timing resistor. ✓
        Change the value of the timing capacitor. ✓
        Change the value of both, the timing resistor and the timing capacitor. ✓              (3)

Copyright reserved                                                            Please turn over

                          Hosted by www.ecexams.co.za.

### Page 11

Downloaded from hlayiso.com
 (EC/SEPTEMBER 2024)     ELECTRICAL TECHNOLOGY: ELECTRONICS                                 11

 5.11    •   A light dependant resistor (LDR) ✓ is connected in series with a 100
             kΩ resistor. ✓
         •   This forms a voltage divider feeding the non-inverting input of the
         •   op-amp. ✓
         •   The inverting input is fed by a 100 kΩ variable resistor. ✓
         •   As the intensity of the light lowers, the LDR resistance increases. ✓
         •   This will cause the voltage on the non-inverting input also to rise. ✓
         •   When the voltage on the non-inverting input rises to a level set higher
             than the reference voltage on the inverting input by the 100 kΩ
             variable
         •   resistor, ✓ the op-amp output immediately goes high, activating the
             transistor which then energises the alarm. ✓                                   (8)
                                                                                           [50]

 QUESTION 6: AMPLIFIERS

 6.1    6.1.1    • Q point Class A amplifier – the Q point is in the middle of the DC
                   load line. ✓
                 • Q point Class B amplifier – the Q point is on the cut-off of the
                   DC load line. ✓                                                          (2)

        6.1.2    • Efficiency Class A amplifier – it has low efficiency, therefore, it
                   has less output power. ✓
                 • Class A amplifier – 25%.
                 • Class B amplifier – it has higher efficiency, therefore, produces
                   more output power. ✓
                 • Class B amplifier – 50%.                                                 (2)

 6.2     •   Increases the input and output impedances of the circuit. ✓
         •   Improves the gain stability of the circuit. ✓
         •   Reduces noise and distortion of the output wave. ✓
         •   Increases the bandwidth of the circuit.                     (Any 3 x 1)        (3)

 6.3     •   A small signal amplifier is used to enlarge a very low level of signal
             voltage or current to a more manageable size. ✓
         •   This amplification must be done without introducing ✓ any distortion or
             noise into the circuit. ✓
         •   This is managed by only amplifying the signal small amounts at a
             time. ✓                                                                        (4)

 6.4    A transistor is said to be biased when its surrounding circuit sets up the
        correct, ✓ pre-chosen voltages at its terminals ✓ which in turn causes
        controlled and selected currents to flow through the circuit. ✓                     (3)

 6.5     •   Cut off region. ✓
         •   Saturation region. ✓
         •   Active operating region. ✓                                                     (3)

 6.6    Transistors are classified based on the position of their Q point on the load
        line. ✓                                                                             (1)

Copyright reserved                                                               Please turn over

                            Hosted by www.ecexams.co.za.

### Page 12

Downloaded from hlayiso.com
 12                              ELECTRICAL TECHNOLOGY: ELECTRONICS        (EC/SEPTEMBER 2024)

 6.7    6.7.1                       𝑉
                     ICmax = 𝑅𝑐𝑐 A ✓
                                        𝑐
                                    12
                     ICmax = 470 𝑘 ✓
                     ICmax = 25,53 𝜇𝐴 ✓                                                          (3)

        6.7.2        When IC = 0 A
                     VCE = VCC ✓
                     VCE = 12 V ✓                                                                (2)

        6.7.3               𝑉𝐶𝐶 −𝑉𝐵𝐸
                     IB =                    A✓
                               𝑅𝐵
                            12 𝑉−0,7 𝑉
                     IB = 120 𝑘 A ✓
                     IB = 94,17 𝜇𝐴 ✓                                                             (3)

        6.7.4
                                 ✓

                                                                  ✓

                                                                           ✓

                                                                                                 (3)

 6.8                    𝑉
        AV = 20 log 𝑉𝑜𝑢𝑡 dB ✓ ✓
                            𝑖𝑛

                            3,5 𝑉
        AV = 20 log 250 𝑚𝑉 dB ✓

        AV = 22,932 dB ✓                                                                         (4)

 6.9     •   At the point of transmission, the signal was immediately amplified to
             make it large enough to carry down the transmission lines for the greatest
             distance. ✓
         •   As the signal travels down the lines, it would be attenuated (reduced in
             size) by the natural resistance of the transmission lines itself. ✓
         •   To overcome this problem, the signal was amplified along the lines
             several times. ✓
         •   To calculate the total gain of the signal in a linear numeric method would
             produce very large and unwieldy values. ✓                                           (4)

Copyright reserved                                                             Please turn over

                                            Hosted by www.ecexams.co.za.

### Page 13

Downloaded from hlayiso.com
 (EC/SEPTEMBER 2024)     ELECTRICAL TECHNOLOGY: ELECTRONICS                                 13

 6.10    •   When an AC voltage is applied to the input of the first amplifier
             stage, ✓ an alternating current will flow in the collector circuit of
             transistor (Q1). ✓
         •   An alternating voltage ✓ will develop across the collector resistor
             (RC1). ✓
         •   The alternating voltage across the RC1 will be transferred through
             capacitor C2 ✓ to the base of the transistor (Q2) in the amplifiers
             second stage. ✓
         •   The proses will be repeated ✓ and the amplified output can be
             measured between C3 and 0 V. ✓                                                 (8)
                                                                                           [45]

                                                                             TOTAL:        200

Copyright reserved                                                               Please turn over

                           Hosted by www.ecexams.co.za.

## Related documents

- [ELEC TECH GR12 QP SEPT2024 Digital English](https://www.hlayiso.com/library/elec-tech-gr12-qp-sept2024-digital-english/9fcfef2b-6d5e-4601-853a-24a2a3993617) — Electrical Technology · QP · 2024 · Eng
- [Electrical Technology May-June 2024 (Power Systems) Eng](https://www.hlayiso.com/library/grade-12-electrical-technology-2024-nsc-june-exam-question-paper-english/0d8d71f4-5725-40ea-9e29-a19e1c8a7867) — Electrical Technology · QP · 2024 · Eng
- [Electrical Technology May-June 2024 (Digital) Eng](https://www.hlayiso.com/library/grade-12-electrical-technology-2024-nsc-june-exam-question-paper-english/2b227e9b-0513-468e-8b1a-d4df808071cd) — Electrical Technology · QP · 2024 · Eng
- [ELEC TECH MEMO SEPT2023 Electronics English](https://www.hlayiso.com/library/elec-tech-memo-sept2023-electronics-english/5630ca3e-e352-4f96-81d0-64ec0103c0e9) — Electrical Technology · Memo · 2023 · Eng
- [ELEC TECH GR12 MEMO SEPT2022 Power English](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2022-power-english-1/1304f4fd-377a-40b4-8abd-4e3860f4fd0d) — Electrical Technology · Memo · 2022 · Eng
- [ELEC TECH GR12 MEMO SEPT2022 Digital English](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2022-digital-english/d9f4d172-a252-4eb9-b51b-6936353fe4e6) — Electrical Technology · Memo · 2022 · Eng

## More from Grade 12 Electrical Technology

- [Gr 12 Dig Elec ATP 2023-24](https://www.hlayiso.com/library/gr-12-dig-elec-atp-2023-24/8d3b2ee7-1d14-498d-a86b-d9fc34674531) — ATP
- [Electrical Technology (Power Systems) (English) June 2025 Question Paper](https://www.hlayiso.com/library/electrical-technology-power-systems-english-june-2025-question-paper/5422e67a-03a4-4202-ba9b-1b9ec9872537) — QP · 2025 · Eng
- [Electrical Technology Nov 2024 (Electronics) Eng](https://www.hlayiso.com/library/electrical-technology-nov-2024-electronics-eng/870e3d22-85e9-42bd-890f-3ef1fd3333cf) — QP · 2024 · Eng
- [Electrical Technology Nov 2024 (Electronics) Afr](https://www.hlayiso.com/library/electrical-technology-nov-2024-electronics-afr/98972424-ba56-4bbc-a319-fdfc1fec40f8) — QP · 2024 · Afr
- [Electrical Technology Nov 2024 (Power Systems) Afr](https://www.hlayiso.com/library/electrical-technology-nov-2024-power-systems-afr/5f2b4850-fffb-4024-8f24-d74bd8677a25) — QP · 2024 · Afr
- [ELEC TECH QP SEPT2023 Electronics English](https://www.hlayiso.com/library/elec-tech-qp-sept2023-electronics-english/867c1cd7-df12-484d-93b7-8812de59d0db) — QP · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
