# Electrical Technology Grade 12 Eastern Cape Mock 2014 QP

> Grade 12 Electrical Technology question paper from the Eastern Cape Mock Exam 2014, 18 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/electrical-tech-qp-gr12-sept-2014-ea/45f3d544-332f-4a5e-9743-b4ea4e3f3d13
- Updated: 2026-09-27
- Subject: Electrical Technology
- Grade: Grade 12
- Document type: Question paper
- Year: 2014
- Exam period: Eastern Cape Mock Exam
- Curriculum: CAPS
- Pages: 18

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Electrical Technology](https://www.hlayiso.com/library/grade-12/electrical-technology) › [Electrical Technology Grade 12 Eastern Cape Mock 2014 QP](https://www.hlayiso.com/library/electrical-tech-qp-gr12-sept-2014-ea/45f3d544-332f-4a5e-9743-b4ea4e3f3d13)

## About this document

Electrical Technology · Grade 12 · Eastern Cape Mock Exam · 2014. Question paper, 18 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                             NATIONAL
                        SENIOR CERTIFICATE

                               GRADE 12

                         SEPTEMBER 2014

                ELECTRICAL TECHNOLOGY

MARKS:   200

TIME:    3 hours

                          *elctdm*

         This question paper consists of 9 pages, including a formula sheet.

### Page 2

Downloaded from hlayiso.com
2                             ELECTRICAL TECHNOLOGY                         (SEPTEMBER 2014)

 INSTRUCTIONS AND INFORMATION

 1.    Answer ALL the questions.

 2.    Sketches and diagrams must be large, neat and fully labelled.

 3.    ALL calculations must be shown, and correct to two decimal places.

 4.    Answers must be clearly numbered.

 5.    A formula sheet is provided at the end of the paper.

 6.    Non-programmable calculators may be used.

Copyright reserved                                                             Please turn over

### Page 3

Downloaded from hlayiso.com
(SEPTEMBER 2014)               ELECTRICAL TECHNOLOGY                                        3

 QUESTION 1: OCCUPATIONAL HEALTH AND SAFETY

 1.1    According to the Occupational Health and Safety Act, how is an accident
        described?                                                                        (3)

 1.2    An employer suspects that a certain employee is using prohibited
        substances in the workplace. Has the employer the right to place CCTV
        cameras in the toilets? Justify your answer.                                      (2)

 1.3    A fellow learner in the workshop has cut him/herself with a carpet knife.
        Describe, in detail, what should be done by a first aider to control the
        bleeding.                                                                         (5)
                                                                                         [10]

 QUESTION 2: THREE-PHASE AC GENERATION

 2.1    Name TWO methods of ac power generation used in South Africa that are
        environmentally friendly.                                                         (2)

 2.2    No electrical machine is 100% efficient. There are mechanical and
        electrical losses. List THREE basic losses.                                       (3)

 2.3    The advantages of three-phase over single phase are divided into three
        categories, namely the generation process, the transmission and
        distribution process, and the load. Select and explain ONE advantage from
        EACH category.                                                                    (6)

 2.4    An ac star-connected alternator generates 15 kVA at a power factor of 0,87
        lagging. The phase voltage is 240 V.

        Calculate:

        2.4.1      The line voltage                                                       (3)

        2.4.2      The line current                                                       (3)

        2.4.3      The active power                                                       (3)
                                                                                         [20]

 QUESTION 3: THREE-PHASE TRANSFORMERS

 3.1    Three-phase transformers are actually three separate single-phase
        transformers which are connected in a certain way. Once they have been
        connected and put inside a special container, the unit is called a three-
        phase transformer. It is of vital importance that the three transformers
        used are identically matched in all regards. State THREE characteristics
        that the three transformers must have.                                            (3)

Copyright reserved                                                             Please turn over

### Page 4

Downloaded from hlayiso.com
4                              ELECTRICAL TECHNOLOGY                              (SEPTEMBER 2014)

 3.2    A 300 kW delta-connected load with a power factor of 0,87 is connected to a
        delta/star transformer. The primary and secondary line voltages of the
        transformer are 6 kV and 400 V respectively. Assume that the transformer
        is 100% efficient.
        Calculate:
        3.2.1    The line current of the load                                                   (3)

        3.2.2    The phase-current of the load                                                  (3)

        3.2.3    The apparent power                                                             (3)

        3.2.4    The primary line current of the transformer                                    (3)

        3.2.5    The primary phase-current of the transformer.                                  (3)

 3.3    Name TWO cooling methods used to cool transformers                                     (2)
                                                                                              [20]
 QUESTION 4: THREE-PHASE MOTORS AND STARTERS
 4.1    Name the THREE main parts of a three-phase induction motor.                             (3)

 4.2    Explain the operation of the ‘squirrel cage’ induction motor.                           (6)

 4.3    How is the direction of rotation changed in a three-phase induction motor?              (1)

 4.4    What is the purpose of the Zero-Volt Coil (NVC)?                                        (2)

 4.5    What is the purpose of the holding in contacts in a motor stater? (Retaining
        circuit)                                                                                (4)

 4.6    Mention TWO electrical inspections that must be carried out on a three-
        phase induction motor after it is installed, and after it is installed , and before
        it is put into operation.                                                               (2)

 4.7    A 90 kW three-phase electrical motor has 12 poles in total and has a rated
        lagging power factor of 0,85. It is connected to a 400 V/50 Hz supply.
        Calculate:
        4.7.1    The apparent power                                                             (3)

        4.7.2    The line current                                                               (3)

        4.7.3    The phase angle                                                                (3)

        4.7.4    The synchronous speed of the motor                                             (4)

        4.7.5    The slip if the shaft speed of the rotor is 1 400 RPM                          (3)

 4.8    Draw a fully labelled wiring diagram of the control circuit of a DOL starter.          (6)
                                                                                              [40]

Copyright reserved                                                                    Please turn over

### Page 5

Downloaded from hlayiso.com
(SEPTEMBER 2014)                ELECTRICAL TECHNOLOGY                                     5

 QUESTION 5: RCL CIRCUITS

 5.1    How does an increase in frequency affect the following?

        5.1.1      Inductive reactance                                                    (1)

        5.1.2      Capacitive reactance                                                   (1)

 5.2    Mention TWO characteristics of a series RCL circuit at resonance.                 (2)

 5.3    A parallel RCL circuit consists of a 50 Ω resistor, an inductor having an
        inductive reactance of 31,42 Ω, and a capacitor of unknown capacitance.
        The parallel circuit is connected to a 100 V/50 Hz supply. The parallel
        circuit draws 4,6 A from the supply.

        Calculate:

        5.3.1      The current through the resistor                                       (3)

        5.3.2      The current through the inductor                                       (3)

        5.3.3      The current through the capacitor                                      (4)

        5.3.4      The value of the unknown capacitor in farads.                         (6)
                                                                                        [20]

 QUESTION 6: LOGIC

 6.1    Name the main components of a simple PLC.                                         (4)

 6.2    Draw THREE ladder logic symbols used in ladder logic programming and
        state what each symbol represents.                                                (6)

 6.3    Give TWO main advantages of using the PLC over hard-wired logic relays.           (2)

 6.4    Draw a labelled block diagram of a PLC scan cycle and explain the THREE
        basic steps in that scan cycle.                                                   (8)

Copyright reserved                                                           Please turn over

### Page 6

Downloaded from hlayiso.com
6                                   ELECTRICAL TECHNOLOGY                          (SEPTEMBER 2014)

 6.5    Scenario

        A fruit-packing plant has a conveyer belt with three position sensing devices.
        Each sensing device produces an output of ‘1’ when a box of fruit is sensed
        in that position. The boxes of fruit must be loaded onto another conveyer belt
        only when two or more of the sensing devices are producing signals of ‘1’.

        What you must do:

        You are required to design a logic system that will perform the given task
        mentioned in the scenario. Write a ladder logic program that will perform this
        function. Your design MUST include the following:

        6.5.1        Truth table                                                                 (4)

        6.5.2        Boolean expression                                                          (2)

        6.5.3        Karnaugh map                                                                (6)

        6.5.4        Gate network                                                                (4)

        6.5.5        Ladder diagram                                                              (4)
                                                                                                [40]

 QUESTION 7: AMPLIFIERS

 7.1    State THREE characteristics of an ideal operational amplifier.                           (3)

 7.2    With reference to operational amplifiers:

        7.2.1    Explain the term ‘open loop gain’                                               (2)

        7.2.2    Explain what is meant by common mode rejection                                  (3)

 7.3    Draw a neat, fully labelled circuit diagram of a differential amplifier.                 (7)

 7.4    Briefly explain the term negative feedback.                                              (2)

 7.5    State THREE advantages of negative feedback.                                             (3)

Copyright reserved                                                                    Please turn over

### Page 7

Downloaded from hlayiso.com
(SEPTEMBER 2014)                ELECTRICAL TECHNOLOGY                                           7

 7.6

        7.6.1      Identify the above circuit.                                                  (1)

        7.6.2      Give ONE application of the above circuit.                                   (1)

        7.6.3      If V1 has an amplitude of 0,2 volts, V2 0,3 volts, and V3 0,5 volts, all
                   at the same frequency, calculate the output voltage and draw the
                   output signal.                                                               (5)

 7.7    7.7.1      Identify the circuit shown below:

                                                                                                (1)

        7.7.2      If the two coils in the circuit shown in QUESTION 7.7.1 each have
                   an inductance of 10 mH and the capacitor has a capacitance of 220
                   nF, calculate the resonant frequency of the circuit.                         (3)

Copyright reserved                                                                 Please turn over

### Page 8

Downloaded from hlayiso.com
8                              ELECTRICAL TECHNOLOGY                            (SEPTEMBER 2014)

 7.8    7.8.1    Draw a fully labelled circuit diagram of an op-amp differentiator.           (5)

        7.8.2    Give ONE application of an op-amp differentiator.                            (2)

        7.8.3    Draw the input and output waveforms for the op-amp differentiator.           (2)

 7.9    7.9.1    Draw a neat, fully labelled circuit diagram of an op-amp Schmitt
                 trigger.                                                                     (5)

        7.9.2    State THREE characteristics of a Schmitt trigger.                            (3)

        7.9.3    Name TWO electronic test instruments that make use of Schmitt
                 triggers.                                                                    (2)
                                                                                             [50]

                                                                              TOTAL:         200

Copyright reserved                                                                    Please turn over

### Page 9

Downloaded from hlayiso.com
(SEPTEMBER 2014)          ELECTRICAL TECHNOLOGY                                 9

 ELECTRICAL TECHNOLOGY/ELEKTRIESE TEGNOLOGIE

 FORMULA SHEET/FORMULEBLAD

                                                  Single phase/Enkel-fase

                               √
      √

      √
                                                  Three-phase/Drie-fase
                               √
      √

                               √
       √

                                                     Delta

                               √

                                √
                                                    Star/Ster

           √                       √

                                = RF (       )

                                END/EINDE

Copyright reserved                                                 Please turn over

### Page 10

(SEPTEMBER 2014)          ELEKTRIESE TEGNOLOGIE                                  9
 ELECTRICAL TECHNOLOGY/ELEKTRIESE TEGNOLOGIE
 FORMULA SHEET/FORMULEBLAD
                                                  Single phase/Enkel-fase
                               √
      √
      √
                                                  Three-phase/Drie-fase
                               √
      √
                               √
       √
                                                     Delta
                               √
                                √
                                                    Star/Ster
           √                       √
                               = RF (         )
                                END/EINDE
Kopiereg voorbehou                                                Blaai om asseblief
                     Downloaded from hlayiso.com

### Page 11

8                              ELEKTRIESE TEGNOLOGIE                           (SEPTEMBER 2014)
 7.8   7.8.1    Teken ŉ volledige benoemde kringdiagram van ŉ operasionele
                versterker-differensieerder.                                                  (5)
       7.8.2    Noem EEN gebruik van ŉ operasionele versterker-differensieerder.              (2)
       7.8.3    Teken die insetgolf en uitsetgolf van die differensieerder.                   (2)
 7.9   7.9.1    Teken ŉ netjiese volledige benoemde kringdiagram van ŉ Schmitt-
                sneller.                                                                      (5)
       7.9.2    Noem DRIE eienskappe van ŉ Schmitt-sneller.                                   (3)
       7.9.3    Noem TWEE elektroniese toetsinstrumente wat van Schmitt-
                snellers gebruik maak.                                                       (2)
                                                                                            [50]
                                                                              TOTAAL:       200
Kopiereg voorbehou                                                             Blaai om asseblief
                     Downloaded from hlayiso.com

### Page 12

(SEPTEMBER 2014)                ELEKTRIESE TEGNOLOGIE                                          7
 7.6
        7.6.1      Identifiseer die kring wat hierbo vertoon word.                             (1)
        7.6.2      Noem EEN gebruik van die bostaande kring.                                   (1)
        7.6.3      As V1 ŉ amplitude van 0,2 volts het, V2 0,3 volts, en V3 0,5 volts,
                   almal teen dieselfde frekwensie, bereken die amplitude van die
                   uitsetgolf. Teken die uitsetsein.                                           (5)
 7.7    7.7.1      Identifiseer die stroombaan wat onder vertoon is:
                                                                                               (1)
        7.7.2      Met verwysing na die stroombaan in VRAAG 7.7.1, bereken die
                   resonante frekwensie as die twee spoele elk ŉ induktansie van 10
                   mH het en die kapasitansie van die kapasitor 220 nF is.                     (3)
Kopiereg voorbehou                                                              Blaai om asseblief
                     Downloaded from hlayiso.com

### Page 13

6                              ELEKTRIESE TEGNOLOGIE                       (SEPTEMBER 2014)
 6.5    Scenario
        ŉ Vrugteverpakkingsaanleg het ŉ voerband met drieposisie-sensor
        toestelle. Elke sensor bring ŉ afvoer van “1” voort wanneer ŉ boks vrugte
        in daardie posisie aangevoel word. Die bokse vrugte moet op ŉ ander
        voerband gelaai word slegs wanneer twee of meer van die
        aanvoelingstoestelle seine van “1” voortbring.
        Wat jy moet doen:
        Daar word van jou vereis om ŉ logikastelsel te ontwerp wat bovermelde
        taak sal uitvoer. Skryf ŉ leerlogiese program wat hierdie funksie kan
        uitvoer. Jou ontwerp MOET die volgende insluit:
        6.5.1    Waarheidstabel                                                         (4)
        6.5.2    Boole-uitdrukking                                                      (2)
        6.5.3    Karnaugh-kaart                                                         (6)
        6.5.4    Die heknetwerk                                                         (4)
        6.5.5    Leerdiagram                                                            (4)
                                                                                       [40]
 VRAAG 7: VERSTERKERS
 7.1    Skryf DRIE eienskappe van ŉ ideale operasionele versterker neer.                (3)
 7.2    Met verwysing na operasionele versterkers:
        7.2.1   Verduidelik kortliks die term ‘oneindige oop lus wins’                  (2)
        7.2.2   Verduidelik wat bedoel word met ‘oneindige gemeenskaplike
                modusverwerpingsverhouding’                                             (3)
 7.3    Teken ŉ netjiese volledige benoemde kringdiagram van ŉ differensiële
        versterker.                                                                     (7)
 7.4    Verduidelik kortliks die uitdrukking “negatiewe terugkoppeling”.                (2)
 7.5    Noem DRIE voordele van negatiewe terugkoppeling.                                (3)
Kopiereg voorbehou                                                         Blaai om asseblief
                     Downloaded from hlayiso.com

### Page 14

(SEPTEMBER 2014)                ELEKTRIESE TEGNOLOGIE                                    5
 VRAAG 5: RCL-STROOMBANE
 5.1    Hoe word die volgende met ŉ styging in frekwensie beïnvloed?
        5.1.1      Induktiewe reaktansie                                               (1)
        5.1.2      Kapasitiewe reaktansie                                              (1)
 5.2    Noem TWEE eienskappe van ŉ serie RCL-stroombaan by resonansie.                 (2)
 5.3    ŉ Parallel RCL-kring bestaan uit ŉ 50 Ω weerstand, ŉ induktor met ŉ
        induktiewe reaktansie van 31,42 Ω, en ŉ kapasitor van onbekende
        kapasitansie. Die parallele-kring word aan ŉ 100 V/50-Hz toevoer verbind.
        Die parallele kring trek 4,6 A van die toevoer.
        Bereken:
        5.3.1      Die stroom deur die weerstand                                       (3)
        5.3.2      Die stroom deur die induktor                                        (3)
        5.3.3      Die stroom deur die kapasitor                                       (4)
        5.3.4      Die waarde (in farads) van die onbekende kapasitor                  (6)
                                                                                      [20]
 VRAAG 6: LOGIKA
 6.1    Noem die hoofkomponente van ŉ eenvoudige PLB.                                  (4)
 6.2    Teken DRIE leerlogika-simbole wat in leerlogika-programmering gebruik
        word en dui aan wat elke simbool verteenwoordig.                               (6)
 6.3    Noem TWEE hoofvoordele vir die gebruik van die PLB in vergelyking met
        hardbedrade logiese relês.                                                     (2)
 6.4    Teken ŉ volledige benoemde blokdiagram van die PLB-skanderingsiklus
        en verduidelik die DRIE basiese stappe van die skanderingsiklus.               (8)
Kopiereg voorbehou                                                        Blaai om asseblief
                     Downloaded from hlayiso.com

### Page 15

4                               ELEKTRIESE TEGNOLOGIE                        (SEPTEMBER 2014)
 3.2    ŉ 300 kW deltaverbinde las met ŉ arbeidsfaktor van 0,87 word aan ŉ delta-
        ster transformator verbind. Die primêre en sekondêre lynspannings is 6 kV
        en 400 V onderskeidelik. Gestel die rendement van die transformator is
        100%.
        Bereken:
        3.2.1   Die lynstroom van die las                                                 (3)
        3.2.2   Die fasestroom van die las                                                (3)
        3.2.3   Die skyndrywing                                                           (3)
        3.2.4   Die primêre lynstroom van die transformator                               (3)
        3.2.5   Die primêre fasestroom van die transformator                              (3)
 3.3    Noem TWEE metodes wat gebruik word om transformators te verkoel.                  (3)
                                                                                         [20]
 VRAAG 4: DRIE-FASE MOTORE EN AANSITTERS
 4.1    Noem die DRIE hoofdele van ŉ drie-fase induksiemotor.                             (3)
 4.2    Verduidelik die werking van ŉ drie-fase kourotormotor.                            (6)
 4.3    Hoe word die rigting van rotasie in ŉ drie-fase induksiemotor verander?           (1)
 4.4    Wat is die doel van die nul-spanning spoel (NSS) met verwysing na ŉ
        motoraansitter?                                                                   (2)
 4.5    Wat is die doel van die inhoukontakte of grendelkontak in ŉ motor-
        aansitter?                                                                        (4)
 4.6    Noem TWEE elektriese inspeksies wat uitgevoer moet word op ŉ drie-fase
        induksiemotor nadat dit geïnstalleer is, en voordat dit aangesit word.            (2)
 4.7    ŉ 90 kW drie-fase elektriese motor het altesame 12 pole, en het ŉ
        nalopende arbeidsfaktor van 0,85. Dit word aan ŉ 400 V/50 Hz-toevoer
        verbind.
        Bereken:
        4.7.1   Die skyndrywing                                                           (3)
        4.7.2   Die lynstroom                                                             (3)
        4.7.3   Die fasehoek                                                              (3)
        4.7.4   Die sinkrone spoed van die motor                                          (4)
        4.7.5   Die glip indien die asspoed van die motor 1 400 OPM is                    (3)
 4.8    Teken ŉ volledige benoemde kontrolediagram van ŉ DOL-aansitter.                   (6)
                                                                                         [40]
Kopiereg voorbehou                                                           Blaai om asseblief
                     Downloaded from hlayiso.com

### Page 16

(SEPTEMBER 2014)               ELEKTRIESE TEGNOLOGIE                                      3
 VRAAG 1: BEROEPSGESONDHEID EN -VEILIGHEID
 1.1    Wat is ŉ ongeluk volgens die Wet op Beroepsgesondheid en -Veiligheid?           (3)
 1.2    ŉ Werkgewer vermoed dat ŉ sekere werker verbode dwelmmiddels in die
        werksplek misbruik. Het die werkgewer die reg om CCTV-kameras in die
        toilette te plaas? Regverdig jou antwoord.                                      (2)
 1.3    ŉ Medestudent in die werkswinkel het hom/haar met ŉ tapytmes gesny.
        Beskryf, in detail, wat ŉ noodhulp-lid moet doen om die bloeding te beheer.     (5)
                                                                                       [10]
 VRAAG 2: DRIE-FASE WS-OPWEKKING
 2.1    Noem TWEE omgewingsvriendelike kragopwekkingsmetodes wat in
        Suid-Afrika gebruik word.                                                       (2)
 2.2    Geen elektriese masjien is 100% doeltreffend nie. Daar bestaan
        elektriese en meganiese verliese. Noem DRIE basiese verliese.                   (3)
 2.3    Die voordele van drie-fase in vergelyking met enkelfase word in drie
        kategorieë opgedeel, naamlik die opwekkingsproses, die transmissie-en-
        verspreidingsproses, en die las. Selekteer en verduidelik EEN voordeel
        van ELKE kategorie.                                                             (6)
 2.4    ŉ WS-sterverbinde alternator wek 15 kVA op teen ŉ arbeidsfaktor van 0,87
        nalopend. Die fasespanning is 240 V.
        Bereken:
        2.4.1      Die lynspanning                                                      (3)
        2.4.2      Die lynstroom                                                        (3)
        2.4.3      Die aktiewe drywing                                                  (3)
                                                                                       [20]
 VRAAG 3: DRIE-FASE TRANSFORMATORS
 3.1    Drie-fase transformators is eintlik drie afsonderlike enkelfase
        transformators wat op ŉ sekere manier aanmekaar verbind is. Sodra hulle
        verbind is, en in ŉ spesiale houer geplaas word, word dit ŉ drie-fase
        transformator genoem. Dit is van wesenlike belang dat die drie
        transformators wat gebruik word om ŉ drie-fasetransformator te vorm, in
        alle opsigte identiese eienskappe moet hê. Gee DRIE eienskappe van die
        drie transformators.                                                            (3)
Kopiereg voorbehou                                                         Blaai om asseblief
                     Downloaded from hlayiso.com

### Page 17

2                             ELEKTRIESE TEGNOLOGIE                       (SEPTEMBER 2014)
INSTRUKSIES EN INLIGTING
1.     Beantwoord AL die vrae.
2.     Sketse en diagramme moet groot en netjies wees, met volle byskrifte.
3.     ALLE berekeninge moet korrek tot twee desimale plekke getoon word.
4.     Antwoorde moet duidelik genommer wees.
5.     ŉ Formuleblad is aan die einde van hierdie vraestel aangeheg.
6.     Nieprogrammeerbare sakrekenaars mag gebruik word.
Kopiereg voorbehou                                                        Blaai om asseblief
                     Downloaded from hlayiso.com

### Page 18

NASIONALE
                       SENIOR SERTIFIKAAT
                              GRAAD 12
                        SEPTEMBER 2014
                 ELEKTRIESE TEGNOLOGIE
PUNTE:   200
TYD:     3 uur
                                   *elctdm*
           Hierdie vraestel bestaan uit 9 bladsye, insluitend ŉ formuleblad.
               Downloaded from hlayiso.com

## Related documents

- [ELETRICAL TECH GR12 SEPT 2014 MEMO EA](https://www.hlayiso.com/library/eletrical-tech-gr12-sept-2014-memo-ea/fb5435ba-7bab-49cf-8a35-a35556c4e79d) — Electrical Technology · Memo · 2014
- [Electrical Technology Nov 2014 Eng](https://www.hlayiso.com/library/electrical-technology-nov-2014-eng/1527bbc6-bcc8-4c67-811c-929c2e79491e) — Electrical Technology · QP · 2014 · Eng
- [ELEC TECH QP SEPT2023 Power Afrikaans](https://www.hlayiso.com/library/elec-tech-qp-sept2023-power-afrikaans/f439f817-47a3-42b4-8762-e49f2c6ca1f2) — Electrical Technology · QP · 2023 · Afr
- [ELEC TECH QP SEPT2023 Electronics Afrikaans](https://www.hlayiso.com/library/elec-tech-qp-sept2023-electronics-afrikaans/f94a8c28-7fd6-4556-9263-d3c58461df27) — Electrical Technology · QP · 2023 · Afr
- [ELEC TECH QP SEPT2023 Digital Afrikaans](https://www.hlayiso.com/library/elec-tech-qp-sept2023-digital-afrikaans/70991b22-194b-42c5-a61f-97cf808eb68d) — Electrical Technology · QP · 2023 · Afr
- [ELEC TECH QP SEPT2023 Electronics English](https://www.hlayiso.com/library/elec-tech-qp-sept2023-electronics-english/867c1cd7-df12-484d-93b7-8812de59d0db) — Electrical Technology · QP · 2023 · Eng

## More from Grade 12 Electrical Technology

- [Gr 12 Dig Elec ATP 2023-24](https://www.hlayiso.com/library/gr-12-dig-elec-atp-2023-24/8d3b2ee7-1d14-498d-a86b-d9fc34674531) — ATP
- [ELECTRIC TECH (Digital) MEMO GR12 SEPT 2025 ENG watermark](https://www.hlayiso.com/library/electric-tech-digital-memo-gr12-sept-2025-eng-watermark/0a867070-2654-43cf-8e48-5037555e0c3d) — Memo · 2025 · Eng
- [Electrical Technology P1 (Electronics) (English) June 2025 Possible Answers](https://www.hlayiso.com/library/electrical-technology-p1-electronics-english-june-2025-possible-answers/4302563e-89b7-4f54-8a21-63b2020e985f) — Memo · 2025 · Eng
- [Electrical Technology Nov 2025 (Digital) MG Afr](https://www.hlayiso.com/library/grade-12-electrical-technology-2025-nsc-november-exam-memorandum/3b862a0c-6a87-4296-b5b6-09b072c7d1e9) — Memo · 2025 · Afr
- [ELEC TECH GR12 MEMO SEPT2024 Power Systems Afrikaans](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2024-power-systems-afrikaans/1a395c97-b838-42e6-9bd6-30a85a714b11) — Memo · 2024 · Afr
- [ELEC TECH GR12 MEMO SEPT2024 Power Systems English](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2024-power-systems-english/bea78337-b137-406a-9b4a-c6e631a84c9d) — Memo · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
