# Electrical Technology Grade 12 Eastern Cape Mock 2015 QP

> Grade 12 Electrical Technology question paper from the Eastern Cape Mock Exam 2015 (English), 11 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/electrical-tech-qp-gr12-sept-2015-eng/99a2d092-ff3c-43fc-bd7c-e9b98e76f768
- Updated: 2026-09-27
- Subject: Electrical Technology
- Grade: Grade 12
- Document type: Question paper
- Year: 2015
- Exam period: Eastern Cape Mock Exam
- Curriculum: CAPS
- Pages: 11

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Electrical Technology](https://www.hlayiso.com/library/grade-12/electrical-technology) › [Electrical Technology Grade 12 Eastern Cape Mock 2015 QP](https://www.hlayiso.com/library/electrical-tech-qp-gr12-sept-2015-eng/99a2d092-ff3c-43fc-bd7c-e9b98e76f768)

## About this document

Electrical Technology · Grade 12 · Eastern Cape Mock Exam · 2015. Question paper, 11 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                               NATIONAL
                          SENIOR CERTIFICATE

                               GRADE 12

                        SEPTEMBER 2015

               ELECTRICAL TECHNOLOGY

MARKS:   200

TIME:    3 hours

                                 *ELCTDM*

         This question paper consists of 11 pages, including formula sheets.

### Page 2

Downloaded from hlayiso.com
2                              ELECTRICAL TECHNOLOGY                   (EC/SEPTEMBER 2015)

INSTRUCTIONS AND INFORMATION

1.     The question paper consists of SEVEN questions.

2.     Answer ALL the questions.

3.     Sketches and diagrams must be large, neat and fully labelled.

4.     ALL calculations must be shown, and correct to TWO decimal places.

5.     Number the answers correctly according to the numbering system used in
       this question paper.

6.     A formula sheet is provided at the end of the paper.

7.     You may use a non-programmable calculator.

8.     Show the units for all answers of calculations.

9.     Write neatly and legibly.

Copyright reserved                                                           Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2015)          ELECTRICAL TECHNOLOGY                                           3

 QUESTION 1: OCCUPATIONAL HEALTH AND SAFETY

 1.1    Dangerous practices most commonly refer to processes that have some
        form of risk or hazard when performed. State TWO activities or tasks that
        can be referred to as dangerous practices performed in an electrical
        workshop.                                                                          (2)

 1.2    An employer has the right to monitor communication within the workplace as
        long as the employee is aware of the monitoring before it takes place. Name
        ONE such form of communication that an employer may monitor.                       (1)

 1.3    Good work ethics require certain character traits or characteristics. Name
        THREE characteristics that contribute to good work ethics.                         (3)

 1.4    It is important that employees work as a team. Describe TWO
        characteristics that contribute to effective teamwork.                             (2)

 1.5    As a first-aider, you are the first on the scene of an accident. Before giving
        first aid, what is the first action that must be taken?                            (2)
                                                                                          [10]

 QUESTION 2: THREE-PHASE AC GENERATION

 2.1    Draw a phasor diagram showing the three voltages in a three-phase
        system.                                                                            (3)

 2.2    List THREE advantages that three-phase systems have over single
        phase systems.                                                                     (3)

 2.3    A delta-connected alternator generates 220 V per phase. Each phase in
        this balanced system has an impedance of 44 Ω. Calculate the line
        voltage, line current and phase current.                                           (8)

 2.4    Explain the difference between active power (also called real or true power)
        and reactive power.                                                                (2)

 2.5    Although three-phase alternators can deliver power to balanced and
        unbalanced loads, why is it important that each phase of the alternators be
        balanced?
        Justify your answer.                                                               (4)
                                                                                          [20]

Copyright reserved                                                              Please turn over

### Page 4

Downloaded from hlayiso.com
4                              ELECTRICAL TECHNOLOGY                        (EC/SEPTEMBER 2015)

 QUESTION 3: THREE-PHASE TRANSFORMERS

 3.1     State whether the following statements are TRUE or FALSE.

         3.1.1   The generators in the power stations produce electricity at 22 kV.         (1)

         3.1.2   This 22 kV is increased by transformers before it is sent out at 275
                 kV, 400 kV or even 765 kV onto the transmission grid.                      (1)

         3.1.3   11 kV is fed into our homes for domestic use.                              (1)

         3.1.4   Eskom is the first utility in the world to successfully operate
                 transmission lines at 765 kV at high altitudes above sea level.            (1)

         3.1.5   380 V and 240 V are available for domestic use.                            (1)

         3.1.6   High voltage overhead conductors are nearly always made of
                 aluminium alloy.                                                           (1)

 3.2     A farmer uses a three-phase delta-star transformer with a transformation
         ratio of 150 : 3 to reduce a line voltage from 11 kV. He uses both single
         and three-phase motors on his farm.

         3.2.1   Determine the voltage across each phase of the three-phase motor
                 if it is star-connected.                                                   (4)

         3.2.2   This three-phase motor has a rating of 12 kW at a power factor of
                 0,8 lagging. Calculate the line current supplied from the secondary
                 of the transformer.                                                        (6)

 3.3     3.3.1   Does the size of the transformer affect the methods of cooling?            (1)

         3.3.2   Name THREE methods or ways in which transformers are cooled.               (3)
                                                                                           [20]

Copyright reserved                                                                 Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2015)                 ELECTRICAL TECHNOLOGY                                      5

 QUESTION 4: THREE-PHASE MOTORS AND STARTERS

 4.1     State THREE advantages that three-phase induction motors have over
         single-phase motors.                                                                 (3)

 4.2     Name the THREE main parts of a three-phase induction motor.                          (3)

 4.3     Draw TWO sketches of a three-phase terminal block showing how the
         terminals are connected for:

         4.3.1       Star                                                                     (3)

         4.3.2       Delta                                                                    (3)

         Label the terminals

 4.4     A 50 kW three-phase induction motor has 12 poles in total and a rated
         laggingpower factor of 0,9. It is connected to a 380 V / 50 Hz supply.

         Calculate the:

         4.4.1       Apparent power (s)                                                       (3)

         4.4.2       Line current                                                             (3)

         4.4.3       Synchronous speed of the motor                                           (4)

         4.4.4       Slip if the shaft speed is 1 400 rpm                                     (3)

         4.4.5       Efficiency of the motor if the power on the shaft is 45 kW               (3)

 4.5     Draw a fully labelled circuit diagram of the control circuit of an automatic
         star-delta motor starter.                                                           (12)
                                                                                             [40]

Copyright reserved                                                                Please turn over

### Page 6

Downloaded from hlayiso.com
6                                ELECTRICAL TECHNOLOGY                        (EC/SEPTEMBER 2015)

 QUESTION 5: RLC CIRCUITS

 5.1    In a series or parallel circuit, describe the effect that the frequency has on:

        5.1.1    Resistance                                                                   (1)

        5.1.2    Inductive reactance                                                          (1)

        5.1.3    Capacitive reactance                                                         (1)

 5.2    Define the term impedance.                                                            (3)

 5.3    A parallel RLC consists of a 47 Ω resistor, an inductor with an inductive
        reactance of 70 Ω, and a capacitor with a capacitive reactance of 80 Ω. The
        parallel circuit is connected to a 110 V / 60 Hz supply.

        Calculate the :

        5.3.1    Total current drawn from the supply                                          (8)

        5.3.2    Impedance of the circuit                                                     (2)

 5.4    In a radio tuned circuit where it is desired to draw the least current, contrast
        series and parallel RLC circuits. Decide which would be the better one to
        use. Justify your choice.                                                            (4)
                                                                                            [20]

 QUESTION 6: LOGIC

 6.1    What does the abbreviation PLC stand for?                                             (1)

 6.2    Give TWO examples of the following with reference to PLC’s:

        6.2.1    Inputs                                                                       (2)

        6.2.2    Outputs                                                                      (2)

 6.3    Name ONE industry where PLC’s are used.                                               (1)

 6.4    Draw the ladder diagram symbols for the following:

        6.4.1    Normally open contact (input)                                                (1)

        6.4.2    Normally closed contact (input)                                              (1)

        6.4.3    Output (coil)                                                                (1)

Copyright reserved                                                                  Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2015)                ELECTRICAL TECHNOLOGY                                     7

 6.5     A PLC program is a set of instructions within a specific programming
         language for a PLC to perform a specific function. The execution of each
         instruction requires THREE basic steps. Describe these steps.                           (3)

 6.6     Simplify the following Boolean expression using a Karnaugh map.

                      ̅        ̅    ̅ ̅                                                          (8)

 6.7     Draw the ladder diagram for a sequence starter without a timer. Refer to the
         following wiring diagram.

                                                                                                 (8)

 6.8     Refer to the following truth table.

                 A                  B             SUM            CARRY
                 0                  0              0               0
                 0                  1              1               0
                 1                  0              1               0
                 1                  1              0               1

         6.8.1       Write the Boolean expressions for the given truth table.                    (4)

         6.8.2       Design and draw the gate network for the expressions in QUESTION
                     6.8.1.                                                                   (8)
                                                                                             [40]

Copyright reserved                                                              Please turn over

### Page 8

Downloaded from hlayiso.com
8                                ELECTRICAL TECHNOLOGY                       (EC/SEPTEMBER 2015)

 QUESTION 7: AMPLIFIERS

 7.1     Draw a neat sketch showing the layout of the dual-in-line IC package of an
         LM 741 op-amp. Show especially the inputs, the output and the supply
         voltage.                                                                             (5)

 7.2     With reference to an ideal op-amp, what is meant by infinite bandwidth?              (2)

 7.3     State THREE advantages of negative feedback.                                         (3)

 7.4     Name TWO applications of the op-amp as a comparator.                                 (2)

 7.5     An inverting op-amp using open loop gain and a 5 V reference voltage on the
         non-inverting input is joined to a supply voltage of (+) and (–) 15 volts. What
         would the output voltage be if:

         7.5.1       5 V were placed on the inverting input?                                  (1)

         7.5.2       3 V were placed on the inverting input?                                  (1)

         7.5.3       6 V were placed on the inverting input?                                  (1)

 7.6     Draw the circuit diagram of a non-inverting operational amplifier. Label the
         components and show input and output waveforms.                                      (8)

 7.7     The feedback resistor used in a non-inverting amplifier is 100 kΩ and the
         input resistor is 10 kΩ. Calculate the amplitude of the output signal if the
         amplitude of the input signal is 3 V.                                                (3)

 7.8     Draw a fully labelled circuit diagram of an op-amp integrator circuit.               (5)

 7.9     Draw the input and output waveforms of the op-amp integrator and explain
         the mathematical function that the circuit performs.                                 (4)

 7.10

                                            FIGURE 7.10

         7.10.1      Identify the circuit in FIGURE 7.10.                                     (1)

         7.10.2      Name TWO applications for the circuit in QUESTION 7.10.1.                (2)

Copyright reserved                                                                 Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2015)              ELECTRICAL TECHNOLOGY                                         9

 7.11    7.11.1       What is a mono-stable multivibrator?                                      (2)

         7.11.2       Draw fully labelled waveforms of the input pulse and the output of a
                      mono-stable multivibrator. Draw at least TWO cycles of these
                      waveforms.                                                                (6)

 7.12

                                             FIGURE 7.12

         7.12.1       Identify the circuit in FIGURE 7.12.                                      (1)

         7.12.2       Calculate the oscillating frequency for an RC oscillator making use
                      of three RC networks. Assume all resistor values are the same and
                      all capacitor values are the same. The value of each resistor is 10
                      kΩ and that of each capacitor 250 pF.                                    (3)
                                                                                              [50]

                                                                                  TOTAL:       200

Copyright reserved                                                                Please turn over

### Page 10

Downloaded from hlayiso.com
10                           ELECTRICAL TECHNOLOGY            (EC/SEPTEMBER 2015)

FORMULA SHEET

THREE-PHASE AC GENERATION               RLC CIRCUITS

Star                                    XL = 2πfL
VL = √
                                        Xc =
IL =
                                        Series
Delta                                   IT = I R = I C = IL
IL = √
                                        Z= √
VL =
                                        VL = I XL
S= √                                    VC = I XC
Q=√          VL IL Sin θ
                                        VT = I Z
Cosθ =
                                        VT = √
Two wattmeter method
PT = P1 + P2

                                        IT =
THREE-PHASE TRANSFORMERS
                                        Cosθ =
Star
VL = √ VPH
IL = IPH                                Cosθ =

Delta
                                        Parallel
IL = √       IPH                        VT = VR = VC = VL
VL = VPH
                                        IR =
P=√      VL IL Cos θ
                                        IC =
S=√      VL IL

Q=√          VL IL Sin θ                IL =

Cosθ =                                  IT = √

         =         =                    Cosθ =

Copyright reserved                                                  Please turn over

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2015)        ELECTRICAL TECHNOLOGY                                    11

THREE-PHASE MOTORS AND                  AMPLIFIERS
STARTERS
                                        Gain AV =    =   [       ]
Star
VL = √
                                        Gain AV =    =       [       ]
IL =

Delta
                                          =
IL = √                                           √
VL =
                                         =
                                                 √
Power
                                        APPARENT POWER
P=       √   VL IL Cos θ
S=       √   VL I L                     PAPP =
Q=       √   VL IL Sin θ

Efficiency (η)=

Speed

ns =

Slip =

Copyright reserved                                                       Please turn over

## Related documents

- [ELECTRICAL TECH QP GR12 SEPT 2015 AFR](https://www.hlayiso.com/library/electrical-tech-qp-gr12-sept-2015-afr/ed9c04e1-50e9-4374-a904-f40d3e782008) — Electrical Technology · QP · 2015 · Afr
- [ELECTRICAL TECH MEMO GR12 SEPT 2015 AFR](https://www.hlayiso.com/library/electrical-tech-memo-gr12-sept-2015-afr/c82cb312-fc62-431f-bf1a-f9c9076667d4) — Electrical Technology · Memo · 2015 · Afr
- [Electrical Technology Nov 2015 Eng](https://www.hlayiso.com/library/electrical-technology-nov-2015-eng/b768fd98-bf39-401b-871e-8e1ca7fc28fb) — Electrical Technology · QP · 2015 · Eng
- [Electrical Technology Feb March 2015 Afr](https://www.hlayiso.com/library/electrical-technology-feb-march-2015-afr/b4d4d7fa-3617-4699-ab83-d3ab5e2709f3) — Electrical Technology · QP · 2015 · Afr
- [Electrical Technology Feb March 2015 Eng](https://www.hlayiso.com/library/electrical-technology-feb-march-2015-eng/8a1c46a9-1b52-4b3d-affc-f3ef767f118c) — Electrical Technology · QP · 2015 · Eng
- [ELEC TECH QP SEPT2023 Power Afrikaans](https://www.hlayiso.com/library/elec-tech-qp-sept2023-power-afrikaans/f439f817-47a3-42b4-8762-e49f2c6ca1f2) — Electrical Technology · QP · 2023 · Afr

## More from Grade 12 Electrical Technology

- [Gr 12 Dig Elec ATP 2023-24](https://www.hlayiso.com/library/gr-12-dig-elec-atp-2023-24/8d3b2ee7-1d14-498d-a86b-d9fc34674531) — ATP
- [ELECTRIC TECH (Digital) MEMO GR12 SEPT 2025 ENG watermark](https://www.hlayiso.com/library/electric-tech-digital-memo-gr12-sept-2025-eng-watermark/0a867070-2654-43cf-8e48-5037555e0c3d) — Memo · 2025 · Eng
- [Electrical Technology P1 (Electronics) (English) June 2025 Possible Answers](https://www.hlayiso.com/library/electrical-technology-p1-electronics-english-june-2025-possible-answers/4302563e-89b7-4f54-8a21-63b2020e985f) — Memo · 2025 · Eng
- [Electrical Technology Nov 2025 (Digital) MG Afr](https://www.hlayiso.com/library/grade-12-electrical-technology-2025-nsc-november-exam-memorandum/3b862a0c-6a87-4296-b5b6-09b072c7d1e9) — Memo · 2025 · Afr
- [ELEC TECH GR12 MEMO SEPT2024 Power Systems Afrikaans](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2024-power-systems-afrikaans/1a395c97-b838-42e6-9bd6-30a85a714b11) — Memo · 2024 · Afr
- [ELEC TECH GR12 MEMO SEPT2024 Power Systems English](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2024-power-systems-english/bea78337-b137-406a-9b4a-c6e631a84c9d) — Memo · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
