# Electrical Technology Grade 12 November 2024 NSC Memo (Eng)

> Grade 12 Electrical Technology memorandum from the November 2024 NSC (English), 16 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/electrical-technology-nov-2024-power-systems-mg-eng/e6952389-402d-4994-afb2-bf1b136c8bf5
- Updated: 2026-10-29
- Subject: Electrical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2024
- Exam period: November 2024 NSC
- Curriculum: CAPS
- Pages: 16

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Electrical Technology](https://www.hlayiso.com/library/grade-12/electrical-technology) › [Electrical Technology Grade 12 November 2024 NSC Memo (Eng)](https://www.hlayiso.com/library/electrical-technology-nov-2024-power-systems-mg-eng/e6952389-402d-4994-afb2-bf1b136c8bf5)

## About this document

Electrical Technology · Grade 12 · November 2024 NSC · 2024. Memorandum. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

NATIONAL
                                 SENIOR CERTIFICATE

                                        GRADE 12

                     ELECTRICAL TECHNOLOGY: POWER SYSTEMS

                                     NOVEMBER 2024

                                 MARKING GUIDELINES

MARKS: 200

                       These marking guidelines consist of 16 pages.

Copyright reserved                                                     Please turn over

### Page 2

Electrical Technology: Power Systems              2                        DBE/November 2024
                                       NSC – Marking Guidelines

INSTRUCTIONS TO THE MARKERS

1.        All questions with multiple answers imply that any relevant, acceptable
          answer should be considered.

2.        Calculations:

          2.1         All calculations must show the formulae.

          2.2         Substitution of values must be done correctly.

          2.3         All answers MUST contain the correct unit to be considered.

          2.4         Alternative methods must be considered, provided that the correct
                      answer is obtained.

          2.5         Where an incorrect answer could be carried over to the next step,
                      the first answer will be deemed incorrect. However, should the
                      incorrect answer be carried over correctly, the marker has to re-
                      calculate the values, using the incorrect answer from the first
                      calculation. If correctly used, the candidate should receive the full
                      marks for subsequent calculations.

3.        This memorandum is only a guide with model answers. Alternative
          interpretations must be considered and marked on merit. However, this
          principle should be applied consistently throughout the marking session at
          ALL marking centres.

Copyright reserved                                                             Please turn over

### Page 3

Electrical Technology: Power Systems              3               DBE/November 2024
                                       NSC – Marking Guidelines

QUESTION 1: MULTIPLE-CHOICE QUESTIONS

1.1       B✓                                                                            (1)

1.2       A✓                                                                            (1)

1.3       B✓                                                                            (1)

1.4       A✓                                                                            (1)

1.5       C✓                                                                            (1)

1.6       B✓                                                                            (1)

1.7       D✓                                                                            (1)

1.8       D✓                                                                            (1)

1.9       C✓                                                                            (1)

1.10      B✓                                                                            (1)

1.11      D✓                                                                            (1)

1.12      A✓                                                                            (1)

1.13      B✓                                                                            (1)

1.14      D✓                                                                            (1)

1.15      C✓                                                                            (1)
                                                                                        [15]

Copyright reserved                                                   Please turn over

### Page 4

Electrical Technology: Power Systems              4                       DBE/November 2024
                                       NSC – Marking Guidelines

QUESTION 2: OCCUPATIONAL HEALTH AND SAFETY

2.1       Workplace means any premises or place where a person performs work ✓ in
          the course of employment. ✓                                                             (2)

2.2       Your right to fair labour practices. ✓
          Your right to work reasonable hours. ✓
          Your right to belong to a trade union.
          Your right to earn a living wage.
          Your right not to be discriminated against.
          Your right to work in a safe environment.                                               (2)

2.3       Poor ventilation reduces the correct amount of oxygen ✓ which might lead
          to drowsiness. ✓
          NOTE: If reference is made to other effects that relates to poor ventilation like
          drowsiness, accidents etc. the answer will be accepted on merit.                        (2)

2.4       • To dismiss an employee without due process. 
          • To reduce the rate of remuneration without due process. 
          • Alter the terms of conditions of his/her employment to terms of conditions
            that is less favourable to him/herself.
          • Harassment and verbal abuse.
          • Alter position relative to other people.
          • Treat employees unfair because of race.

          NOTE: If a learner only mentions an infringement of rights only 1 mark will be
          awarded. Duplicate mentioning of rights will not be awarded.                            (2)

2.5       Equipment may be damaged making it unsafe  endangering the life of other
          users  which might lead to an accident/injury.                                         (2)
                                                                                                  [10]

Copyright reserved                                                             Please turn over

### Page 5

Electrical Technology: Power Systems              5                       DBE/November 2024
                                       NSC – Marking Guidelines

QUESTION 3: RLC CIRCUITS
3.1       3.1.1       Inductive reactance is the opposition to the flow of current ✓ when
                      an inductor is connected to an ac supply. ✓
                      Inductive reactance is the opposition offered to the flow of
                      alternating current by an inductor.                                        (2)
          3.1.2       Bandwidth is the range of frequencies ✓ for which the circuit output
                      voltage (or) current value equals 70,7 % or more of its maximum
                      amplitude. ✓
                      NOTE: A band of frequencies centred around the resonant
                      frequency without mentioning 70,7% of the amplitude will be
                      awarded 1 mark.
                      The bandwidth of an RLC circuit refers to the range of frequencies
                      over which an RLC circuit effectively responds to an input signal
                      and transmits more than 50% of the power to a load.                        (2)
3.2       3.2.1       Lagging ✓                                                                  (1)
          3.2.2                                              ✓

                                                             ✓

                                                             ✓
                                                                                                 (3)
          3.2.3
                                                             ✓

                                                             ✓

                                                             ✓
                                                                                                 (3)
          3.2.4                                              ✓

                                                             ✓

                                                             ✓                                   (3)
          3.2.5                VL ✓
                                                         ✓
                                                        VT
                       (VL – VC)
                                               θ                  ✓
                                                   IT   VR
                                                          Rotation
                               VC   ✓
                      NOTE: Rotation and VT are compulsory marks, thereafter any two
                      correctly placed labels.
                      XL and XC will not be accepted as the given diagram to complete
                      from the question paper indicated voltage values.                          (4)
Copyright reserved                                                            Please turn over

### Page 6

Electrical Technology: Power Systems              6                    DBE/November 2024
                                       NSC – Marking Guidelines

          3.2.6       A decrease in frequency caused the inductive reactance to
                      decrease ✓ and the capacitive reactance to increase. ✓ When
                      these two values move closer to one another their effects cancel
                      each other out decreasing the impedance ✓ causing the current to
                      increase and the phase angle to decrease.                               (3)

3.3       3.3.1                                             ✓

                                                            ✓

                                                            ✓                                 (3)

          3.3.2                                             ✓

                                                            ✓

                                                            ✓
                                                                                              (3)

          3.3.3       IT = IR = 3,83 A                 ✓
                      XC = XL which indicates that the ✓
                      circuit is at resonance                                                 (2)

          3.3.4       XC = XL                               ✓

                                                            ✓

                                                            ✓
                                                                                              (3)

          3.3.5                                             ✓

                                                            ✓

                                                            ✓
                                                                                              (3)
                                                                                              [35]

Copyright reserved                                                         Please turn over

### Page 7

Electrical Technology: Power Systems              7                        DBE/November 2024
                                       NSC – Marking Guidelines

QUESTION 4: THREE-PHASE AC GENERATION

4.1       The load can be balanced in a three-phase system. ✓
          Both single-phase and three-phase loads can be powered from a three-phase
          system. ✓
          Supply of power is constant.
          A Three-phase system is more economical.
          A three-phase system can be connected in star or delta.                                 (2)

4.2       4.2.1       22 kV ✓
                      50 Hz ✓                                                                     (2)

          4.2.2       Nuclear fuel ✓
                      Wind ✓
                      Water
                      Solar                                                                       (2)

          4.2.3       •    After generation the voltage is stepped up ✓ to a value between
                           220 kV to 765 kV.
                      •    It is then transmitted over long distances ✓ by means of cables
                           made of aluminium and steel
                      •    to distribution stations where it is stepped down ✓ before it is
                           distributed further.                                                   (3)

4.3       4.3.1       Star ✓                                                                      (1)

          4.3.2                R✓        Y ✓    B ✓
                       V

                       0
                                                        t

                                 ✓
                               120o    120o
                                                            OR
                      V        R✓      Y✓      B✓

                       0      ✓                     t
                            120o       120o

                      NOTE: If a candidate gives the correct sequence but in a different
                      order, marks will be awarded. E.g. Y, B, R or V2, V3, V1 etc.               (4)

Copyright reserved                                                             Please turn over

### Page 8

Electrical Technology: Power Systems              8               DBE/November 2024
                                       NSC – Marking Guidelines

4.4       4.4.1                                              ✓

                                                             ✓

                                                             ✓                          (3)

          4.4.2                          ✓

                                         ✓         OR

                                         ✓                                              (3)
          4.4.3                                             ✓

                                                            ✓

                                                            ✓
                                                                                        (3)
          4.4.4                                             ✓

                                                            ✓

                                                            ✓
                                                                                        (3)
          4.4.5                              ✓
                                                   OR
                                             ✓
                                             ✓

                                                                                        (3)

Copyright reserved                                                   Please turn over

### Page 9

Electrical Technology: Power Systems                 9                     DBE/November 2024
                                          NSC – Marking Guidelines

4.5       4.5.1       Synchronous motors. ✓
                      Phase advancers.                                                            (1)
          4.5.2

                                     L1

                            SUPPLY
                                     L2
                                                                             LOAD
                                     L3

                                                   ✓        ✓

                                                       C2 ✓
                      NOTE: Because the capacitors are not labelled in the prescribed
                      textbook, an exception is made to the rule of labelling. 3 Marks will
                      be awarded if the capacitors are correctly drawn without labels.            (3)
          4.5.3       The two-wattmeter method ✓ would be preferred because there is
                      no neutral connection available, ✓ one can only connect between
                      the lines.                                                                  (2)
                                                                                                  [35]

Copyright reserved                                                             Please turn over

### Page 10

Electrical Technology: Power Systems             10                      DBE/November 2024
                                       NSC – Marking Guidelines

QUESTION 5: THREE-PHASE TRANSFORMERS

5.1       Transformers are used for raising or lowering the voltage ✓ in an AC circuit
          with a corresponding decrease or increase ✓ in current.                               (2)
5.2       A transformer is an electrical device that operates on the principle of
          electromagnetic induction ✓ to transfer electrical energy from one electric
          circuit to another without changing ✓ the frequency.                                  (2)
5.3       5.3.1       Core-type. ✓                                                              (1)
          5.3.2       The laminated iron core reduces the circulating currents ✓ (eddy
                      currents) inside the core material reducing the heat ✓ generated by
                      them making the transformer more efficient.
                      The laminations are designed to increase the efficiency of a
                      transformer by reducing the heat generated in the core of the
                      transformer.                                                              (2)
          5.3.3       The iron core in the core-type transformer is almost entirely
                      surrounded by windings ✓ whereas in the shell-type transformer
                      the windings are almost entirely surrounded by the iron core. ✓
                      Core type transformer has three limbs
                      Shell type transformers has five limbs                                    (2)
          5.3.4       The iron core of a transformer is continuously subjected to
                      magnetic polarity changes while switched on. ✓ Before the
                      magnetic polarity can be reversed, the residual magnetism in the
                      core has to be forced to zero. ✓ The power used in destroying this
                      residual magnetism is converted into heat. ✓                              (3)
5.4      5.4.1                                               ✓

                                                             ✓

                                                             ✓
                                                                                                (3)

         5.4.2
                                                             ✓

                                                             ✓

                                                             ✓
                                                                                                (3)

Copyright reserved                                                           Please turn over

### Page 11

Electrical Technology: Power Systems             11                       DBE/November 2024
                                       NSC – Marking Guidelines

         5.4.3
                                          ✓

                                                   OR
                                          ✓

                                          ✓
                                                                                                  (3)

         5.4.4                                               ✓

                                                             ✓

                                                             ✓
                                                                                                  (3)
5.5       •   Burnt out windings ✓ caused by excessive current which causes too much
              heat dissipation.
          •   Electrical short circuits between the primary and secondary windings. ✓
          •   Windings that short circuit to the core of the transformer.
          •   Short circuit between adjacent windings, which change the ratios of the
              transformer.                                                                        (2)
5.6       5.6.1       Conservator/oil tank. ✓                                                     (1)

          5.6.2       It provides cooling. ✓
                      It prevents the formation of moisture on the windings.                      (1)

          5.6.3       The Buchholz relay monitors the flow of gas in the transformer, ✓
                      when the gas reaches a high concentration it triggers the alarm,
                      and disconnects the transformer from its operation. ✓                       (2)

                                                                                                  [30]

Copyright reserved                                                             Please turn over

### Page 12

Electrical Technology: Power Systems              12                    DBE/November 2024
                                        NSC – Marking Guidelines

QUESTION 6: THREE-PHASE MOTORS AND STARTERS

6.1       Drill press ✓
          Bench Grinder ✓
          Lathe                                                                                (2)
6.2       6.2.1       There is a lower than required insulation resistance reading
                      between coil V and earth. ✓
                      The insulation resistance between coil V and earth is 100 kΩ and
                      the minimum required insulation resistance between a coil and
                      earth is 1 MΩ.                                                           (1)

          6.2.2       When the motor is powered any person that touches any bare
                      metal part of the motor may be electrocuted. ✓
                      Sparking may occur which might create a fire hazard.
                      If the motor is powered with the indicated fault, the motor can be
                      damaged.                                                                 (1)
          6.2.3
                       U1              V1           W1

                                ✓               ✓           ✓

                       W2              U2           V2                                         (3)

6.3       6.3.1                                                 ✓

                                                                ✓

                                                                ✓                              (3)

          6.3.2                                                 ✓

                                                                ✓

                                                                ✓                              (3)
          6.3.3                     %𝑠𝑙𝑖𝑝                       ✓

                                                                ✓
                                                                ✓                              (3)
                                                          OR

Copyright reserved                                                          Please turn over

### Page 13

Electrical Technology: Power Systems             13                        DBE/November 2024
                                       NSC – Marking Guidelines

6.4       6.4.1       MC1N/O is a retain/latching contact ✓ that will keep the contactors
                      energised after the start button is released.                               (1)
          6.4.2       Contactor T is an ON-delay timer that creates a time delay ✓ of
                      5 seconds before switching its contacts. ✓                                  (2)
          6.4.3       MC2 is connected in series with the normally closed contacts of the
                      timer and MC3. ✓ This means that it will be energised as soon as
                      the start button is pressed ✓ as is required by a star delta starter.       (2)
          6.4.4       After 5 seconds the timer T will open its N/C contact de-energising
                      MC2 ✓ while closing its N/O contact ✓ and energising MC3 ✓ and
                      in the process changing the motor coil configuration from star to
                      delta in the main circuit.                                                  (3)
6.5      6.5.1
                                                                  ✓

                                                                  ✓

                                                                  ✓                               (3)

         6.5.2
                                                                  ✓

                                                                  ✓

                                                                  ✓                               (3)

         6.5.3                                                    ✓
                                                                  ✓

                                                                  ✓
                                                                  ✓

                                                                  ✓

                     NOTE: If a candidate substitute the phase angle, voltage and
                           current correct without showing the calculation of the phase
                           angle,
                           3 marks will be awarded for the substitution step.
                                                    OR

                     NOTE: 3 marks are allocated to the substitution step.                        (5)
                                                                                                  [35]

Copyright reserved                                                             Please turn over

### Page 14

Electrical Technology: Power Systems             14                      DBE/November 2024
                                       NSC – Marking Guidelines

QUESTION 7: PROGRAMMABLE LOGIC CONTROLLERS (PLCs)

7.1       7.1.1       Input scan ✓
                      Output scan ✓                                                             (2)

          7.1.2       After the PLC has executed the programme instruction, ✓ it
                      processes each rung of the programme ✓ in a line-by-line
                      manner, sequentially. ✓                                                   (3)

7.2       7.2.1       OR gate ✓                                                                 (1)

          7.2.2

                      NOTE: Mark the ladder diagram according to the candidate’s
                      answer in 7.2.1.                                                          (3)

          7.2.3       W=0✓
                      X=1✓
                      Y=1✓
                      Z=1✓
                      NOTE: Mark the truth table according to the candidate’s answer in
                      7.2.1.                                                                    (4)

7.3       7.3.1       Discrete/Digital ✓
                      Analogue ✓                                                                (2)

          7.3.2       Irrigation control ✓
                      Monitoring of rivers and dams ✓
                      Numerous chemical, petrol and diesel manufacturing by remote
                      monitoring                                                                (2)

          7.3.3       An inductive proximity sensor is used to detect the presence of
                      metal objects ✓ and whether they are ferrous or nonferrous. ✓

                      A capacitive proximity sensor uses an electrostatic field which can
                      sense motion, ✓ pressure, ✓ chemical composition of materials
                      and fluids.                                                               (4)

Copyright reserved                                                           Please turn over

### Page 15

Electrical Technology: Power Systems             15                                DBE/November 2024
                                       NSC – Marking Guidelines

7.4
                                                   ✓                                   MC 1
                                                START             MC2 N/C ✓            FWD ✓
                     O/L      STOP              FWD

                                                    ✓
                                               MC1 N/O

                                                START                       ✓          MC 2   ✓
                                                                  MC1 N/C              REV
                                                 REV ✓

                                                     ✓
                                               MC 2 N/O

          NOTE: - If a candidate closes the O/L or STOP inputs that were given, a mark
               will be deducted for each one that is closed, because the program will
               not operate correct according to the given diagram in the question.
               - If a candidate connects START REV straight to the L power rail
               bypassing O/L and STOP, START REV will not be awarded a mark
               because of the wrong connection of START REV
                                               OR

                                                                              M1
                           O/L                    STOP

                                                                            MC1
                                                 START       MC2 N/C        FWD
                           M1                    FWD

                                               MC1 N/O

                                                 START                        MC2
                                                  REV        MC1 N/C          REV

                                               MC2 N/O

                                                                                                         (8)

Copyright reserved                                                                    Please turn over

### Page 16

Electrical Technology: Power Systems             16                     DBE/November 2024
                                       NSC – Marking Guidelines

7.5       7.5.1       A = Three Phase AC supply ✓
                      B = AC to DC converter/Rectifier ✓
                      C = Filter ✓                                                          (3)

          7.5.2       AC synchronous squirrel cage induction ✓
                      AC asynchronous wound rotor ✓
                      AC synchronous with a permanent magnet
                      AC synchronous with brushes or brushless                              (2)

          7.5.3       The DC to AC inverter inverts the DC voltage back to an AC
                      voltage. ✓ This is done by switching the IGBT's on and off ✓ at a
                      high frequency.✓.                                                     (3)

          7.5.4       Pulse width modulation (PWM) is a modulation technique that
                      generates variable-width pulses ✓ to represent the amplitude of
                      an analogue input signal. ✓ The output switching transistor is on
                      more of the time for a high-amplitude signal and off more of the
                      time for a low-amplitude signal. ✓
                                                      OR
                      VSD switching frequency refers to the rate at which the DC bus
                      voltage is switched on and off during the pulse width modulation
                      (PWM) process. The on and off switching of the DC voltage is done
                      by Insulated Gate Bipolar Transistors (IGBTs).                        (3)
                                                                                            [40]

                                                                               TOTAL:       200

Copyright reserved

## Related documents

- [Electrical Technology Nov 2024 (Electronics) Eng](https://www.hlayiso.com/library/electrical-technology-nov-2024-electronics-eng/870e3d22-85e9-42bd-890f-3ef1fd3333cf) — Electrical Technology · QP · 2024 · Eng
- [Electrical Technology Nov 2024 (Electronics) Afr](https://www.hlayiso.com/library/electrical-technology-nov-2024-electronics-afr/98972424-ba56-4bbc-a319-fdfc1fec40f8) — Electrical Technology · QP · 2024 · Afr
- [Electrical Technology Nov 2024 (Power Systems) Afr](https://www.hlayiso.com/library/electrical-technology-nov-2024-power-systems-afr/5f2b4850-fffb-4024-8f24-d74bd8677a25) — Electrical Technology · QP · 2024 · Afr
- [ELEC TECH GR12 MEMO SEPT2024 Digital English](https://www.hlayiso.com/library/elec-tech-gr12-memo-sept2024-digital-english/cb603860-b00d-40c2-a36b-aa5e97b7d1e5) — Electrical Technology · Memo · 2024 · Eng
- [ELEC TECH GR12 QP SEPT2024 Electronics Afrikaans](https://www.hlayiso.com/library/elec-tech-gr12-qp-sept2024-electronics-afrikaans/6fc3719e-6eab-469e-baf1-ca1645c8ebad) — Electrical Technology · QP · 2024 · Afr
- [ELEC TECH GR12 QP SEPT2024 Power Systems Afrikaans](https://www.hlayiso.com/library/elec-tech-gr12-qp-sept2024-power-systems-afrikaans/928e510b-68c2-4670-a7c7-fe20b388befb) — Electrical Technology · QP · 2024 · Afr

## More from Grade 12 Electrical Technology

- [Gr 12 Dig Elec ATP 2023-24](https://www.hlayiso.com/library/gr-12-dig-elec-atp-2023-24/8d3b2ee7-1d14-498d-a86b-d9fc34674531) — ATP
- [Electrical Technology (Power Systems) (English) June 2025 Question Paper](https://www.hlayiso.com/library/electrical-technology-power-systems-english-june-2025-question-paper/5422e67a-03a4-4202-ba9b-1b9ec9872537) — QP · 2025 · Eng
- [ELEC TECH GR12 QP SEPT2024 Digital English](https://www.hlayiso.com/library/elec-tech-gr12-qp-sept2024-digital-english/9fcfef2b-6d5e-4601-853a-24a2a3993617) — QP · 2024 · Eng
- [Electrical Technology May-June 2024 (Power Systems) Eng](https://www.hlayiso.com/library/grade-12-electrical-technology-2024-nsc-june-exam-question-paper-english/0d8d71f4-5725-40ea-9e29-a19e1c8a7867) — QP · 2024 · Eng
- [Electrical Technology May-June 2024 (Digital) Eng](https://www.hlayiso.com/library/grade-12-electrical-technology-2024-nsc-june-exam-question-paper-english/2b227e9b-0513-468e-8b1a-d4df808071cd) — QP · 2024 · Eng
- [ELEC TECH MEMO SEPT2023 Digital English](https://www.hlayiso.com/library/elec-tech-memo-sept2023-digital-english/1d2b04e7-c486-4f4e-9494-b0ccbcaf2ebb) — Memo · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
