# Engineering Graphics and Design Grade 12 P1 2015 QP (Eng)

> Grade 12 Engineering Graphics and Design Paper 1 question paper from the NSC Supplementary 2015 (English), 6 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/engineering-graphics-design-p1-feb-march-2015-eng/a1c6e200-3b3e-4ba2-9aad-92739aefe31b
- Updated: 2026-09-27
- Subject: Engineering Graphics and Design
- Grade: Grade 12
- Document type: Question paper
- Year: 2015
- Exam period: NSC Supplementary
- Paper: 1
- Curriculum: CAPS
- Pages: 6

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Engineering Graphics and Design](https://www.hlayiso.com/library/grade-12/engineering-graphic-and-design) › [Engineering Graphics and Design Grade 12 P1 2015 QP (Eng)](https://www.hlayiso.com/library/engineering-graphics-design-p1-feb-march-2015-eng/a1c6e200-3b3e-4ba2-9aad-92739aefe31b)

## About this document

Engineering Graphic And Design · Grade 12 · NSC Supplementary · 2015. Question paper, 6 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com
                                                                                INSTRUCTIONS AND INFORMATION
                                                                                1.  This question paper consists of FOUR questions.
                                                                                2.  Answer ALL the questions.
                                                                                3.  ALL drawings are in first-angle orthographic projection, unless otherwise stated.
                                                                                4.  ALL drawings must be completed using instruments, unless otherwise stated.
                                                                                5.  ALL answers must be drawn accurately and neatly.
                                                                                6.  ALL the questions must be answered on the QUESTION PAPER as instructed.
                                                                                7.  ALL the pages must be re-stapled in numerical sequence, irrespective of
                                                                                    whether the question was attempted.
                                                                                8. Time management is essential in order to complete all the questions.
                                                                                9. Print your examination number in the block provided on every page.
                                                                                10. Any details or dimensions not given must be assumed in good proportion.

                                NATIONAL
                           SENIOR CERTIFICATE
                                                                                                            FOR OFFICIAL USE ONLY
                                                                                         QUESTION   MARKS OBTAINED     ½   SIGN   MODERATED      ½      SIGN

                                                                                            1
                                  GRADE 12
                                                                                            2
                                                                                            3
               ENGINEERING GRAPHICS AND DESIGN P1
                                                                                            4
                                                                                         TOTAL
                           FEBRUARY/MARCH 2015
                                                                                                    2 0 0                         2 0 0
MARKS: 100                                                                                          FINAL CONVERTED MARK             CHECKED BY

TIME: 3 hours                                                                                                _______

                                                                                                            100
                                                                                                          COMPLETE THE FOLLOWING:
                                                                                                                     CENTRE NUMBER
                     This question paper consists of 6 pages.
                                                                                                                     CENTRE NUMBER
                                                                                                                EXAMINATION NUMBER

                                                                                                                EXAMINATION NUMBER

                                                                *BASIC-EDUCATION*

Copyright reserved                                                                                                                   Please turn over

### Page 2

Engineering Graphics and Design/P1

Downloaded from hlayiso.com

DBE/Feb.-Mar. 2015

6000 x 850 x 2000 DEEP.

SOAK PIT
SEPTIC 4
TANK BRICK PAVING
| EXISTING ai
‘3 ich POOL
BAN
1 REN, easine | a]
( ouTBULDING | )3 +
STAND ‘ + RE STAND iS
322°«¢8 | | 31 y
Ps '
5
| | EXISTING BRAAI
| 9g iE
id
H 2a RE
a
"
| RE
5000 BL.
_-WIRE FENGE

PAVEMENT Ww

6000

MULLER STREET

ois

A SITE PLAN
on) SCALE 1 : 300

PAVEMENT

GOTZE STREET

3520

NOTE:
Contractors must verify all dimensions and
levels on site before commencing work.
Architects to be notified immediately of any
discrepancies.

ARCHITECTS SIGNATURE

CLIENT'S SIGNATURE

QUESTION 1: ANALYTICAL (CIVIL)

Given:

The site plan for a proposed new dwelling, a title panel and a table of questions. The drawing has not been prepared

to the indicated scale.

Instructions:

Complete the table below by neatly answering the questions, which refer to the accompanying drawing and title

panel [30]
ANSWER 20 QUESTIONS ANSWERS
In the space provided below, draw, in
neat freehand, the front view and top |_1__| Whats the reference code for the drawing? 1
view of the SANS 10143 graphical |~> | What was th d revision? 1
symbol for a DOUBLE SINK. at was the second revision
3. | What scale is indicated for the drawing? 1
4 |How many inspection chambers are there on the sewer line? 1
5 | What finish is used around the pool? 1
6 | What new development is proposed on the site? 1
7 | In what colour would new glass be presented on a drawing? 1
8 | In what colour would new concrete be presented on a drawing? 1
9 | What is the depth of the feature at 17 1
10 | Name the feature at 2. 1
11 | What does the number at 3 indicate? 1
12 | What does the line at 4 indicate? 1
13 | Name the feature at 5. 1
3 14 |Name the feature at 6. 1
15 | Which elevation of the new dwelling faces Gotze Street? 2
2 2014-12-07| Include a soak pit
46 | Whatis the distance from the swimming poo! to the south-western 2
+ | 2014-11-09) Change driveway boundary line in metres?
2
Revision| pate. | DESCRIPTION 17 | What is the length of the boundary facing stand 32 in metres? 2
4g | In the space below, determine the perimeter of the new dwelling 3
TONY KROOS & ASSOCIATES in metres.
ARCHITECTS In the space below, determine the total building area of stand 31
BAYERN DRIVE 19 |. 3
13-46 MUNICH GARDENS in square metres.
NEW GERMANY
& PINETOWN In the space provided in the title panel, draw, in neat freehand,
tonroontbundoscom 20 | the front view and top view of the SANS 10143 graphical symbol 4
PRINTED BY DATE OF PRINT for a DOUBLE SINK.
FUSSBAL PRINTERS 2015-02-12
DRAWING TITLE, TOTAL 30
SITE PLAN e000
ROK ANSWER 18 80 ANSWER 19
Show ALL calculations. 5 Show ALL calculations.
PROPOSED DWELLING FOR MR 3 g
RIBERY ON STAND 31, CNR 3 NEW DWELLING 8
MULLER STREET AND GOTZE + 4
STREET. 8
PROJECT NUMBER DRAWING NUMBER my
CHLW-2013 BM 3113 3109 | 3100,
DATE Raum [Ove] SCALE a a
2015-01-28) ARJEN ROB 1:300 EXAMINATION NOMBER:
REFERENCE CODE
EXAMINATION NUMBER [2

Copyright reserved

1vG2014 |

Please tum over

### Page 3

Engineering Graphics and Design/P1

Downloaded from hlayiso.com

DBE/Feb.-Mar. 2015

QUESTION 2: TRANSITION PIECE

Given:
The front view and the top view of a square-
to-irregular four-sided transition piece.

Instructions:
Draw, to scale 1 : 1, the following views of the
transition piece:

2.1. The given top view

2.2. The given front view

2.3. The development of the transition piece

NOTE
ABis the seam. [36]

if — i
27
» Fl
A
BLA 3
&
ASSESSMENT CRITERIA
1 |FRONTAND TOP view | 14
2 | TLCONSTRUCTION 8
3 | DEVELOPMENT 17

PENALTIES (-)
TOTAL 36
EXAMINATION NUMBER

EXAMINATION NUMBER [3

Copyright reserved

Please tum over

### Page 4

Engineering Graphics and Design/P1

Downloaded from hlayiso.com

DBE/Feb.-Mar. 2015

QUESTION 3: PERSPECTIVE

Giver
Two views of an entrance with a control point
and the information needed to draw a
two-point perspective drawing

PP - Picture plane

HL - Horizon line

GL - Ground line

SP - Station point

Instructions:
Complete the perspective drawing

* Align the drawing sheet with the ground line
(GL).

* Determine and label the vanishing points.

* Show ALL necessary construction.

* Show the wall thickness at the window and
door.

* NO internal or hidden detail is required. [40]

‘S ASSESSMENT CRITERIA
1. |CONSTRUCTION+ VPs | 7
PP
2 | ROOF 4
3 | WALLS 17
4 | QUARTER-CIRCLE 6
5 | WINDOW + DOOR 6
PENALTIES (-)
TOTAL 40
HL T
i i
i i
i i
i i
i i
i i
I I
i i
i i
i i
I I
i i
i i
i i
i i
i i
i i
i i
GL H H

Copyright reserved

EXAMINATION NUMBER

EXAMINATION NUMBER [4

Please tum over

### Page 5

sou uu Downloaded from hlayiso.com

DBE/Feb.-Mar. 2015

DOOR AND WINDOW SCHEDULE QUESTION 4: CIVIL DRAWING
FLOOR FINISHES. yp TOFIT y  --TOFIT 14,50 Given:
20" J eavnoca oAreT 1 ry 5 * The incomplete south-west elevation of a new cottage,
1 100x180 GUTTER 3 KITCHEN TILE showing tho wals, the verandah pillars, the sliding door
L. L_—— 200 x20 FASCIA BOARD 4 LOUNGE: TILE opening, the roof and notes
e P| SLIDING DOOR OPENING 5 VERANDAH: GRANO oS ONL * The incomplete floor plan showing the walls, position of the
Fe} > a ee RS ol ol verandah pillars, doors, windows, fixtures and electrical layout
| VERANDAH LEVEL a s 3 # Roof notes with a schematic diagram of a roof truss
- - L GROUND LEVEL H * Room designations and floor finish
[ \ * Verandah pillar and beam detail
r I © The incomplete foundation ‘A’ and verandah detail
INCOMPLETE SOUTH-WEST ELEVATION Dt SLIDING DOOR | * The incomplete foundation and external wall detail
D2 INTERNAL DOOR Hl « A door and window schedule
Wi WINDOW ' se SLIDING DOOR INTERNAL DOOR | « A table of rainwater items
we WINDOW t WITH FRAME (01) FRAME AND DOOR | ¢ A table of roof components
FIXTURES MI (02) © A table of electrical symbols
we TOILET ROOM DESIGNATIONS 1550 600 © A table of fixtures
WB WASH BASIN eo EE now NOTE: The incomplete foundation ‘A’ and floor plan of the new
st SER ls] A=OPENINGSive | cottage, drawn to scale 1 : 50, on page 6
ai) ale Ia ||) 8= Fixe PaNeL
ELECTRICAL FITTINGS =| Instructions:
4. LIGHT SWITCH - SINGLE-POLE WINDOW (W2) es mm FIBRE ‘Answer this question on page 6.
F FLUORESCENT LIGHTS nao mo mo CEMENT SILLUNDER| 4,1 Using the given incomplete floor plan, draw, in first-angle
4, CEILING LIGHT ALL WINDOWS orthographic projection and to scale 1 : 50, the following
5. WALL MOUNTED LIGHT winDow (wt) views of the new cottage:
8. SWITCHED SOCKET OUTLET 4.1.1 THE COMPLETE FLOOR PLAN
7, DISTRIBUTION BOARD Add the following features to the drawing:
NoTE: RAINWATER ROOF COMPONENTS ® ALL doors and windows
THE ARROW SHOWS THE LIGHT ITEMS 200 x.20 mm FASCIA BOARD| * ALL fixtures as indicated by abbreviations
< CONNECTION TO THE SWITCH. ra * ALL electrical fittings as indicated by numbers
|p | 12050 x 7250.mn
INCOMPLETE FLOORPLAN ®& g 50 ey 0 Frivoer Bea Ao THE SOUTHWEST ELEVATION
S Sa (20 75 x 50 mm PURLINS Show the following features on the drawing:
f T ian * The outside walls, verandah and sliding door detail
\ * The roof detail, including the fascia board, gutter, rain-
| 420 x50 x 7250 mm 18 ELECTRICAL SYMBOLS . water down pipe and guly
TIMBER BEAM ors ~ eld ocd
mH 4.2 Using the given incomplete foundation ‘A’, draw, to scale
ROOF NOTE! 3 1: 20, a DETAILED SECTION on cutting plane A-A of
Roo prc 20° WITH 200 x 20 mm FACIA & RwDP co is} fe) the area in the ellipse shown on the incomplete floor plan.
BOARD ON ALL SIDES ee ONING Py SJ * Show the following features on the drawing:
ROOF COVER 15 mm FIBRE CEMENT SHEET og xX awl * The complete foundation ‘A’ and verandah detail
ON 75 x 50 mm PURLINS @ 900 mm cle a = K . The complete foundation, external wall and sliding door
A < i
189 x 38 mm ROOF TRUSS ON 115 x 38 mm L| g GULLY (6) = ¢ The roof detail, including the fascia board and gutter
8 * ALL features of the verandah to the left of cutting plane
9 mm CEILING BOARD ON 38 x 38 mm 200 x 200 mm VERANDAH FIXTURES A-A, including the rainwater down pipe and gully
BRANDERING STRIPS @ 600 mm cle PILLAR AND BEAM DETAIL 500 * ALL hatching detail. ONLY the substructure hatching
ee = may be drawn in neat freehand
4100 x 150 mm GUTTER ON ALL SIDES 25mm SCREED > iy [
3 1000 /T~ be. |e Ts a 8 Label the following:
5 8 S 8 2] =| * The south-west elevation
gs g|GROUND LeveL — soon LEVEL {8 8] | » The room designations and floor finishes
- a Ls 2/8 < LE") + Using the correct abbreviations, label the following features in
EQUAL | EQUAL | EQUAL | EQUAL A = lle Z =i / is vO} the correct view: ground level and finished floor level.
‘OF 3 /8] SINK (S)
‘SCHEMATIC DIAGRAM OF A ROOF TRUSS 600 600. ° 200) NOTE:
. ALL drawings must comply with the guidelines and graphical
INCOMPLETE FOUNDATION ‘A° INCOMPLETE FOUNDATION WASH BASIN TOILET = SHOWER symbols contained in the SANS 10143. [94]
“AND VERANDAH DETAIL AND EXTERNAL WALL DETAIL (WB) (we) (Ss)
LAA I
Copyright reserved aN Please tum over

### Page 6

Engineering Graphics and Design/P1

Downloaded from hlayiso.com

DBE/Feb.-Mar. 2015

a4

DETAILED SECTION
SCALE 1 : 20

PENALTIES

INCORRECT OVERALL SCALE

INCORRECT POSITIONING OF VIEWS.

NON-ALIGNMENT OF VIEWS

TOTAL PENALTIES (-)

RWDP

FLOOR PLAN

Copyright reserved

ASSESSMENT CRITERIA
FLOOR PLAN
posse | ostaneo | sian | mooerare
ee = |! WINDOWS 12
RWDP | [2 [etcermca 10
| [3 | rocrures 4
\ | 7 4
\ BIC |
\ | | 5 [eases 5
\
\ | SUBTOTAL 35
| SOUTH-WEST ELEVATION
LN | 1 | ROOF 6%
|
| [2 peresecty | 9
| 3 | poor 3
| [4 [wees 1%
| SUBTOTAL 20
| DETAILED SECTION
| [a | RooF beraL 12
| [a [roumoarons* ayy,
WALLS + S.AB
| DOOR + GULLY
| Ja |Rwor+ 9
| GurTER
| [4 |ratoHns 6%
| SUBTOTAL 39
| TOTAL 94
|

TOTAL PENALTIES (-)

FINAL TOTAL

EXAMINATION NUMBER

EXAMINATION NUMBER [6

SCALE 1:50
OMA

## Related documents

- [EGD P1 Nov 2015 Afr](https://www.hlayiso.com/library/egd-p1-nov-2015-afr/309a6147-6709-4531-a054-a52d8a2db08a) — Engineering Graphic and Design · QP · 2015 · Afr
- [EGD P1 Nov 2015 Eng](https://www.hlayiso.com/library/egd-p1-nov-2015-eng/4042ac4f-9fce-4f31-90dd-d08f4bedd488) — Engineering Graphic and Design · QP · 2015 · Eng
- [Engineering Graphics Design P1 Feb March 2015 Eng](https://www.hlayiso.com/library/engineering-graphics-design-p1-feb-march-2015-eng/88655b5e-7fec-4ea4-9157-683d2facffb9) — Engineering Graphic and Design · QP · 2015 · Eng
- [Engineering Graphics and Design P1 Feb-March 2013 Eng](https://www.hlayiso.com/library/engineering-graphics-and-design-p1-feb-march-2013-eng/37365098-47b5-4e99-a689-1cc79a64dc6f) — Engineering Graphic and Design · QP · 2013 · Eng
- [EGD P1 MEMO EA](https://www.hlayiso.com/library/egd-p1-memo-ea/8cc4d7e1-de42-4f0c-8b76-33e12b34de79) — Engineering Graphic and Design · Memo · 2015
- [Engineering Graphics and Design P1 Feb-March 2013 Memo Eng](https://www.hlayiso.com/library/engineering-graphics-and-design-p1-feb-march-2013-memo-eng/e47bce6e-3f42-4036-8b1a-0f4bd485d09c) — Engineering Graphic and Design · Memo · 2013 · Eng

## More from Grade 12 Engineering Graphics and Design

- [EGD p1 Memo protected watermark](https://www.hlayiso.com/library/egd-p1-memo-protected-watermark/4afe999d-829f-4029-81f4-f01ba594587f) — Memo · 2025
- [EGD P2 ENG MEMO DD watermark](https://www.hlayiso.com/library/egd-p2-eng-memo-dd-watermark/19628a3f-1387-4c5c-bbbd-fa7b7d8dfa52) — Memo · 2025 · Eng
- [Engineering Graphics and Design P2 June 2025 Possible Answers](https://www.hlayiso.com/library/engineering-graphics-and-design-p2-june-2025-possible-answers/33c95b30-d504-42bd-acc1-56b020ec92fb) — Memo · 2025
- [EGD P2 GR12 MEMO SEP2024 English](https://www.hlayiso.com/library/egd-p2-gr12-memo-sep2024-english/aa083dea-fbb2-497c-bf52-437fbe9dc226) — Memo · 2024 · Eng
- [EGD P1 GR12 MEMO SEPT2023 Afr+Engl](https://www.hlayiso.com/library/egd-p1-gr12-memo-sept2023-afr-engl/f0ef5f18-cddf-486c-9131-1f3fc1806ba4) — Memo · 2023 · Afr
- [Pages from Exam Paper September 2023 Final-5](https://www.hlayiso.com/library/pages-from-exam-paper-september-2023-final-5/ce3ac88f-c3a8-47ff-81b7-09ccce136455) — QP · 2023

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
