# Engineering Graphics and Design Grade 12 P1 NSC June 2021 QP

> Grade 12 Engineering Graphics and Design Paper 1 question paper from the NSC June Exam 2021 (English), 6 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/engineering-graphics-design-p1-may-june-2021-eng/5748ef99-69a6-4e4c-900c-2b8c5f2da3a4
- Updated: 2026-09-27
- Subject: Engineering Graphics and Design
- Grade: Grade 12
- Document type: Question paper
- Year: 2021
- Exam period: NSC June Exam
- Paper: 1
- Curriculum: CAPS
- Pages: 6

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Engineering Graphics and Design](https://www.hlayiso.com/library/grade-12/engineering-graphic-and-design) › [Engineering Graphics and Design Grade 12 P1 NSC June 2021 QP](https://www.hlayiso.com/library/engineering-graphics-design-p1-may-june-2021-eng/5748ef99-69a6-4e4c-900c-2b8c5f2da3a4)

## About this document

Engineering Graphic And Design · Grade 12 · NSC June Exam · 2021. Question paper, 6 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

basic education

Department
« y) Basic Education
"4 REPUBLIC OF SOUTH AFRICA

SENIOR CERTIFICATE EXAMINATIONS/
NATIONAL SENIOR CERTIFICATE EXAMINATIONS

INSTRUCTIONS AND INFORMATION

This question paper consists of FOUR questions.

Answer ALL the questions.

ALL drawings are in first-angle orthographic projection, unless otherwise stated.
ALL drawings must be prepared using pencil and instruments, unless otherwise
stated.

ALL answers must be drawn accurately and neatly.

ALL the questions must be answered on the QUESTION PAPER, as instructed.
ALL the pages, irrespective of whether the question was attempted or not, must
be re-stapled in numerical sequence in the TOP LEFT-HAND CORNER ONLY.
8. Time management is essential in order to complete all the questions.

9. Print your examination number in the block provided on every page.

10. Any details or dimensions not given must be assumed in good proportion.

BONS

Non

ENGINEERING GRAPHICS AND DESIGN P1

2021

MARKS: 100

TIME: 3 hours

This question paper consists of 6 pages.

| |
| |
| |
| Barcode label |
| |
| |
| |

FOR OFFICIAL USE ONLY
question | marks osTaeo | } | sic} moveraten | } | sion] Re-MARKING | } | sicn
1
2
3
4
TOTAL
2/0|0 2|0|0 2|0/0
FINAL CONVERTED MARK CHECKED BY
100

COMPLETE THE FOLLOWING:
CENTRE NUMBER

CENTRE NUMBER
EXAMINATION NUMBER

Copyright reserved

EXAMINATION NUMBER

Please tum over

### Page 2

a Downloaded from hlayiso.com sc

QS ¢ | LAND SURVEYOR'S CERTIFICATE FOR | SYMBOL LEGEND: Nore te verify all d 4 QUESTION 1; ANALYTICAL
Oe STAND 1232 contractors must verify all dimensions anc
S| eORNERHEIGHTS BOUNDARY LENGTHS) 1. DECIDUOUS TREES e levels on site before commencing work | Given:
IN METRES IN METRES Architects to be notified immediately of any " nts . . a
discrepancies. The site plan of an existing house with a proposed new lapa, a title panel and a table of questions. The drawing is not
A= 307.3 AB = 24,77 2. SHRUBBERY presented to the indicated scale.
B= 3075 BC = 48
c= 3048 077 3. SEALEOGARDEN > ARCHITECT'S SIGNATURE: Instructions: ; ;
LIGHTS anow Complete the table below by neatly answering the questions, which refer to the accompanying drawing, title panel and
D = 304,3 5,65 CLIENT'S SIGNATURE: civil content. [30]
A STAND 1291 8 ANSWER 20 QUESTIONS ANSWERS
In the space below, draw, in neat . blo for?
1600 BL freehand, the top view of the SANS 1 ]What was Sheila responsible for? 1
307 10143 graphical symbol for a 2 |Who printed the drawing? 1
— GREASE TRAP. >
|Z} beMousH 3 |What is the date of the second revision’ 1
EXISTING is indi ?
Sanne 4 |What scale is indicated for the drawing 1
Rel 5 |What is the web address of the architectural firm? 1
4m MOTOR VEHICLE io 6 | How wide is Ridge Road in millimetres? 1
ENTRANC! 1)
~ 7_|In which street is the main access to STAND 1232? 1
fa
= | 8 |How many sealed garden lights are shown on STAND 1232? 1
4x OW x In which two metric units are the dimensions on the site plan
3 Te g |} ne 2
8 FA indicated?
306 awow & | 19 | How should the garage have been presented to show that it has q
5 | to be demolished?
- | 11 |What does the arrow at 1 indicate? 1
' 12 |Name the symbol at 2. 1
fal 'E|
s H 13 |What does the abbreviation SWD at 3 stand for? 1
E | 3 14 |What is the abbreviation for the sewerage feature at 47 1
ele r —
Gh |B | -11-1| ADD STORMWATER What colour could be used to indicate new steel work on
e |2 al 2 [PPO] PIPE AND ORAIN | *® | elevations? 1
mf 2 al 1 [2020-11-17] Remove GARAGE | 16 |Which elevation of the existing house faces Staple Street? 2
a : ,
z EXISTING HOUSE i REVISION | DATE DESCRIPTION | 47 What isthe fall of STAND 1232 from corner A to comer D in :
me DRULOFF : - ‘i
of ARCHITECTS 18 |In the space below (ANSWER 18), determine the perimeter of STAND 1232 in metres. 3
sos ra etree oe 49 || the space below (ANSWER 19), determine the total area of the existing house in square metres. 7
“ a ae Round off the answer to TWO decimal places.
INK-ON (PTY)LTD | 2020-12-28 9 | In the space in the fille panel (ANSWER 20), draw, in neat freehand, the top view ofthe SANS 10743 |
DRAWING THLE graphical symbol fora GREASE TRAP
TOTAL | 30
SITE PLAN
ANSWER 18 ANSWER 19
PROIECT Show ALL calculations. amy Show ALL calculations.
PROPOSED NEW LAPA FOR PETER -—
PARKER ON STAND 1232, S| 6000
4 STAPLE STREET, PLETTENBERG BAY, at 4
4091 g
PROIECT NUMBER DRAWING NOWBER 8
® / e ‘RY-2020 8225 6000
so t DATE DRann — [ereoxeD, | SALE
~ RIDGE ROAD 6 m WIDE 2020-11-18] SHEILA CRISPIN 1:300 S| 3
—-—-—-—- -—-— REFERENCE CODE: 3 3g
SITE PLAN | SPDR-2020 EXAMINATION NUMBER
SCALE 1 : 300 or) EXISTING HOUSE EXAMINATION NUMBER [2
100000

Copyright reserved Please tum over

### Page 3

Engineering Graphics and Design/P1

DBE/2021

Downloaded from hlayiso.com

QUESTION 2: SOLID GEOMETRY

Given:

© The front view of a right regular hexagonal prism
with a right conical hole

© Anauxiliary view

* Horizontal cutting plane C-C

Instructions:

Draw, to scale 1 : 4, the following views of the solid:
2.1. The given front view

2.2 Asectional top view

2.3. The right view

© Planning is essential
* Show ALL hidden detail.
Show ALL construction.

[36]

ASSESSMENT CRITERIA

AUXILIARY VIEW 2

FRONT VIEW 5

eles

SECTIONAL TOP VIEW 16

4 |RIGHT VIEW 13

PENALTIES (-)

TOTAL} 36

EXAMINATION NUMBER

EXAMINATION NUMBER

[3

Copyright reserved

Please tum over

### Page 4

Engineering Graphics and Design/P1

PP.

Downloaded from hlayiso.com

DBE/2021

QUESTION 3; PERSPECTIVE

Given:

Three views of a modern exhibition centre and
the information needed to draw a two-point

perspective drawing
PP - Picture plane
HL - Horizon line
GL - Ground line
SP - Station point

Instructions:

Complete the perspective drawing.

© Align the drawing sheet with the ground

line (GL).

« Determine and label the vanishing points.

Show ALL construction.

« Show ALL visible internal detail as seen

through the opening and the glass
* NO hidden detail is required

[39]

ASSESSMENT CRITERIA

CONSTRUCTION 6

LOWER SECTION 15

HL—

a
a
OPENING <
co}

GL—

UPPER SECTION 6

1
2
3
4

ROOF

5

JARC

PENALTIES (-)

TOTAL | 39

HL

| OPENING

GLASS.

Copyright reserved

er

EXAMINATION NUMBER

EXAMINATION NUMBER

[4

Please tum over

### Page 5

Engineering Graphics and Design/P1

Downloaded from hlayi

|

ROOF CAP

RIDGE COVER
150 x 100 mm GUTTER ON

250 x 20 mm FASCIA BOARD
WITH @100 mm RWDP THAT
STOPS 50 mm ABOVE THE
GROUND LEVEL

3100

2050]

mal

RWVOE, 71

ROOF LINE

INCOMPLETE SCHEMATIC DIAGRAM OF
AROOF TRUSS AT CUTTING PLANE A-A,

ROOF NOTES:
30° ROOF PITCH

115 x 40 mm ROOF TRUSSES ON
145 x 40 mm WALL PLATES

300 mm ROOF OVERHANG TO END OF
ROOF TRUSS

20 mm FIBRE CEMENT ROOF SHEET ON
75 x 50 mm PURLINS @ 800 mm cic

250 x 20 mm FASCIA BOARDS WITH
150 x 100 mm GUTTERS ON ALL SIDES

10 mm CEILING BOARD ON 40 x 40 mm,
BRANDERING STRIPS @ 400 mm cle

s|s

1
i
i

v

WINDOW OPENING
FINISHED FLOOR LEVEL

GROUND LEVEL

‘SLIDING DOOR OPENING
250 x 150 mm STEP

FEATURES
D1 SLIDING DOOR
D2 DOOR

wW1 WINDOW

w2 WINDOW

w3 WINDOW

FIXTURES
we TOILET
WB WASH BASIN
B BATH
S SINK

ELECTRICAL FITTINGS

1. ONE-WAY SWITCH -
SINGLE-POLE

2. ONE-WAY SWITCH -
DOUBLE-POLE

CEILING LIGHT
WALL MOUNTED LIGHT
SWITCHED SOCKET OUTLET

owas

NOTE:
‘THE ARROW SHOWS THE LIGH
CONNECTION TO THE SWITCH.

ag
fu

3080

2080

GROUND
LEVEL

80 x 200 mm LINTELS
-— ABOVE ALL WINDOW
OPENINGS.

TOP OF
COURTYARD

2 | ‘

l

ROOM AND AREA DESIGNATIONS.

FLOOR FINISHES
1 BEDROOM: VINYL
2 BATHROOM: THLE

3 LIVING AREA: TILE

4 COURTYARD: PAVING

DOOR AND WINDOW SCHEDULE

a 1800. y p TOFIT 1 450
t 1

a 1500 y

1200
>
>

‘WINDOW (W1)

2050
2050

——
‘SLIDING DOOR (01)

sod]

WINDOW NOTES:

FLUORESCENT LIGHT 2 x 40 W * A= OPENING SIDE

* B= FIXED PANEL
* ALL FRAMES 50 mm THICK

WINDOWS

DOOR (02)

* 150 x 20 mm FIBRE CEMENT SILL UNDER ALL

F 1200 {00 |

Al

900
©
>

600

WINDOW (W3)

WINDOW (W2)

T ROOF COMPONENTS

ELECTRICAL SYMBOLS

— 250 x 20 mm FASCIA BOARD

A «16 6

150 x 100 mm GUTTER

= ie ¢oa

a 75 x 50 mm PURLINS

300
PN ROOF CAP AND RIDGE COVER

K xX ow!

WALL

RAINWATER,

FIXTURES

ITEMS.

80 mm

BRICK PAVING

ail,

sommcoupacteo J

HARDCORE

700
800

a

INCOMPLETE FOUNDATION
AND EXTERNAL WALL DETAIL

600

800

400

ry
eel

8) S
“letoor LEVEL Sj}

500

Or 3
(OF 8

750
200,

700
500

C3

100

WASH BASIN
(WB)

TOILET
(we)

1700
BATH
(8)

Copyright reserved

QUESTION 4: CIVIL DRAWING

Given:

* The incomplete north elevation of a new house, showing the
walls, the window opening, the sliding door opening, the roof
and labels

* The incomplete floor plan showing the walls, positions of the
doors, windows, fixtures and electrical layout

* An incomplete schematic diagram of a roof truss at cutting
plane A-A and roof notes

* The incomplete foundation and external wall detail

* Room and area designations and floor finishes

* A door and window schedule

* A table of roof components

* A table of electrical symbols

* A table of rainwater items

* A table of fixtures

* The incomplete floor plan and ground level of the new house,
drawn to scale 1 : 50, and the incomplete foundation and
break lines of a detailed section, drawn to scale 1 : 20, on
page 6

Instructions:

Answer this question on page 6.

4.1 Using the given incomplete floor plan and ground level,
draw, to scale 1 : 50, the following views of the new house:
4.1.1 THE COMPLETE FLOOR PLAN
Add the following features to the drawing:

* ALL doors and windows

* ALL fixtures as indicated by abbreviations

* ALL electrical fittings as indicated by numbers

* ALL hatching detail

4.1.2 THE COMPLETE NORTH ELEVATION

Show the following features on the drawing:

* The outside walls, step, window and sliding door detail

* The roof detail, including the fascia boards, gutters and
rainwater down-pipes

* The finished floor level

4.2 Using the incomplete foundation, draw, to scale 1 : 20 and
between the break lines, the DETAILED SECTION on
cutting plane A-A of the area in the ellipse shown on the
incomplete floor plan.

Show the following features on the drawing:

*The paving, complete foundation, external wall and
window detail

* The courtyard wall to the east of cutting plane A-A

* The roof detail, including all roof and rainwater items to
the east of cutting plane A-A

* ALL hatching detail. ONLY the substructure hatching may
be drawn in neat freehand.

Label the following:

* The north elevation

* The room designations and floor finishes

* Ground level, finished floor level and damp-proof course (use
the correct abbreviation and show it on ALL relevant views)

NOTE:
ALL drawings must comply with the guidelines and graphical
symbols as contained in the SANS 10143. [95]

[5

Please tum over

### Page 6

a Downloaded from hlayiso.com sc

De Sn ee Co FOR OFFICIAL USE ONLY
Og ROR INCORRECT SCALE(S)
3
A USED
B NON-ALIGNMENT OF
¢ Views
D VIEW(S) ROTATED
E SECTION VIEWED
F INCORRECTLY
c INCORRECT LETTERING
H
TOTAL ToTAL|
ASSESSMENT CRITERIA
GL_ FLOOR PLAN
possieie | osraneo | sign MODERATED]
ee
2 |rixrures 8
3 leectaca. at
4 |HaTcHING 3
5 |ussets 4
SUBTOTAL 363
NORTH ELEVATION
Ww 4 |ROoF + RwoP ai
Zz se
2 2 famusester= |g
Sg 3 |poor+wnoow | 8
x
4 |Laeets 1
SUBTOTAL 244
rs DETAILED SECTION
4 |rooroem | 144
3 farce 63
4 |soes 13
RWDP ‘SUBTOTAL 34
aa TOTAY 95
| PENALTIES (-)
| GRAND TOTAL
SECTION A-A EXAMINATION NUMBER
SOME ray V7 SCALE 1:20
|_ i | 6

## Related documents

- [Engineering Graphics Design P1 May June 2021 Afr](https://www.hlayiso.com/library/engineering-graphics-design-p1-may-june-2021-afr/f290a6a3-a7cf-44f6-9087-17a45b187609) — Engineering Graphic and Design · QP · 2021 · Afr
- [Engineering Graphics Design P1 Nov 2021 Afr](https://www.hlayiso.com/library/engineering-graphics-design-p1-nov-2021-afr/124a16ca-48b9-45f0-b37b-77c9f5640fa2) — Engineering Graphic and Design · QP · 2021 · Afr
- [Engineering Graphics Design P1 May June 2018 Afr](https://www.hlayiso.com/library/engineering-graphics-design-p1-may-june-2018-afr/87e40f03-4299-49a9-bc86-3d5add5613c4) — Engineering Graphic and Design · QP · 2018 · Afr
- [Front Page](https://www.hlayiso.com/library/front-page/49b02d9e-be15-4e0b-8824-7a635d26b964) — Engineering Graphic and Design · QP · 2021
- [Vraag 2](https://www.hlayiso.com/library/vraag-2/5aac2e1c-8eca-4331-99d2-2431a9f7ba16) — Engineering Graphic and Design · QP · 2021
- [Vraag 1](https://www.hlayiso.com/library/vraag-1/69d4e45c-c278-40ea-bd2a-865f30b58ce2) — Engineering Graphic and Design · QP · 2021

## More from Grade 12 Engineering Graphics and Design

- [EGD p1 Memo protected watermark](https://www.hlayiso.com/library/egd-p1-memo-protected-watermark/4afe999d-829f-4029-81f4-f01ba594587f) — Memo · 2025
- [EGD P2 ENG MEMO DD watermark](https://www.hlayiso.com/library/egd-p2-eng-memo-dd-watermark/19628a3f-1387-4c5c-bbbd-fa7b7d8dfa52) — Memo · 2025 · Eng
- [Engineering Graphics and Design P2 June 2025 Possible Answers](https://www.hlayiso.com/library/engineering-graphics-and-design-p2-june-2025-possible-answers/33c95b30-d504-42bd-acc1-56b020ec92fb) — Memo · 2025
- [EGD P2 GR12 MEMO SEP2024 English](https://www.hlayiso.com/library/egd-p2-gr12-memo-sep2024-english/aa083dea-fbb2-497c-bf52-437fbe9dc226) — Memo · 2024 · Eng
- [EGD P1 GR12 MEMO SEPT2023 Afr+Engl](https://www.hlayiso.com/library/egd-p1-gr12-memo-sept2023-afr-engl/f0ef5f18-cddf-486c-9131-1f3fc1806ba4) — Memo · 2023 · Afr
- [Pages from Exam Paper September 2023 Final-5](https://www.hlayiso.com/library/pages-from-exam-paper-september-2023-final-5/ce3ac88f-c3a8-47ff-81b7-09ccce136455) — QP · 2023

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.