# Gr 12 Weld Met ATP 2023 24

> Grade 12 Mechanical Technology annual teaching plan, 4 pages. Read online or get the free PDF download.

- Page: https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Annual teaching plan
- Curriculum: CAPS
- Pages: 4

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Gr 12 Weld Met ATP 2023 24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d)

## About this document

Mechanical Technology · Grade 12. Annual teaching plan, 4 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

2023/24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING & METALWORK): GRADE 12

2023/24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING & METALWORK): GRADE 12 (TERM 1)

 TERM 1                         WEEK 1                  WEEK 2                  WEEK 3                   WEEK 4                    WEEK 5                      WEEK 6                          WEEK 7                        WEEK 8                     WEEK 9                 WEEK 10           WEEK 11
 CAPS TOPICS              Safety                  Safety                  Safety                  Terminology (specific)                             Tools (specific)                                               Materials                                               Revision          Assessment

 TOPICS/CONCEPTS,         First Aid HIV/Aids      Knowledge of            Knowledge and           Templates:                 Application of          The principles and functions of the following purpose-         Identify materials by:        Methods of                                    Assignment
 SKILLS AND VALUES        Awareness               basic First Aid         application of          • Marking off              WELDING                 made tooling and equipment:                                    • Sound test                  enhancing the
                          OHS Act Machine-        measures:               basic workshop                templates, full or   SYMBOLS:                                                                               • Bending test                properties of steel
                          specific safety         Analyse the OHS         layouts:                      part                 All the welding                                                                        • Filling test                (only heated
                                                  Act and regulations                                                                                 •    Stocks and die           •    Rolling machine                                          temperature and
                          measures                                        • Process layout        • Sets of roof             symbols according to                                                                   • Machine test
                                                  where applicable to                                                                                      (characteristics and     •    Punch and cropper                                        cooling apply):
                                                                          • Product layout              trusses, beams,      the Code of Practice                                                                   Practical:
                                                  the following                                                                                            drill sizes)                  machine
                                                                          Referring to the              lattice girders      for welding – SANS                                                                                                 • Tempering
                                                  machines:                                                                                           •    Grinding machines        •    Plasma cutter              Identify material types
                                                                          OHS Act, analyse              and plate girders                                                                                                                       • Case hardening
                                                                                                                                                           (portable, bench)        •    Brinell and Rockwell       by using sound,
                                                  • Grinding              the responsibilities    • Method of                Practical:                                                                                                         • Hardening
                                                                                                                                                      •    Cutting machines              hardness testers           bending, filling and
                                                       machines           of the:                       obtaining and                                                                                                                           • Annealing
                                                                                                                             Apply the welding             (drilling machines,      •    Moments and forces         machining tests
                                                       (portable,                                       transferring                                                                                                                            • Normalising
                                                                          • Employer                                         symbols as indicated          power saw, horizontal         testers
                                                       bench and                                        dimensions                                                                                                                              Practical:
                                                                          • Employee                                         on a given sketch             band saw)                •    Tensile testers
                                                       surface)                                   Calculations of                                                                                                                               Do enhancement on
                                                                          Practical:                                         according to SANS to     •    Guillotine machine       •    MIG/MAG welders
                                                  • Cutting (drilling                             sheet metal for            produce a project                                                                                                  materials by applying
                                                       machines,          Compare the                                                                      (manual and power
                                                                                                  rolling and bending:       from a template               saw)                                                                                 tempering on cutting
                                                       power saw,         process and product
                                                                                                  • Rolled plate                                      •    Press machines                                                                       tools and hardening soft
                                                       band saw)          layout of two
                                                                                                  • Rectangular and                                   •    Joining equipment                                                                    carbon steel
                                                  • Shearing              different
                                                                          manufacturing or              square plate                                       (arc, spot, gas)
                                                       machines
                                                       (manual and        maintenance             Practical:
                                                       power driven)      workshops               Do calculations on                                 Practical:
                                                  • Press                                         rolling and bending                                Display an understanding of the use and care of purpose-
                                                       machines                                   plates                                             made tooling and equipment when producing a product and
                                                  • Joining (arc,                                                                                    doing maintenance
                                                       gas)
                                                  • Handling and
                                                       usage of gas
                                                       cylinders
               SBA        ASSIGNMENT

  ASSESSMENT
               (FORMAL)   PAT - Phase 1
                          The legislation governing workplaces in relation to COVID- 19 is the Occupational Health and Safety Act, Act 85 of 1993, as amended, read with the Hazardous Biological Agents Regulations. Section 8 (1) of the Occupational Health and Safety (OHS) Act, Act 85 of 1993. Safe
                          work practices are types of administrative controls that include procedures for safe and proper work used to reduce the duration, frequency, or intensity of exposure to a hazard. Examples of safe work practices for SARS-CoV-2 include: Requiring regular hand washing or using
                          of alcohol-based hand rubs. Learners and teachers should always wash hands when they are visibly soiled and after removing any PPE. Keep safe distances and wear a mask at all times. See the document on the workshop safety measures

                                                                           Downloaded from hlayiso.com                                                                                                                                                                                                         1

### Page 2

2023/24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING & METALWORK): GRADE 12

2023/24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING & METALWORK): GRADE 12 (TERM 2)

 TERM 2                         WEEK 1                   WEEK 2                         WEEK 3                               WEEK 4                            WEEK 5                       WEEK 6                 WEEK 7              WEEK 8               WEEK 9             WEEK 10          WEEK 11

 CAPS TOPICS (NO         Forces (specific)                                                                                                             Joining methods (inspection of welds) (specific)                                               PAT                   MID-YEAR EXAM
 DEVIATIONS FROM                                                                                                                                                                                                                                      consolidation
 CAPS)
 TOPICS/CONCEPTS,        FORCES AND MOMENTS:                                FORCES AND MOMENTS:                 STRESS AND STRAIN                      INSPECTION OF               INSPECTION OF               INSPECTION OF WELDS:                   PAT - Phase 2
 SKILLS AND VALUES       Effects of forces and moments on engineering       Basic calculations on:              (Calculation of):                      WELDS:                      WELDS:                      Stresses and distortion in
                         components applying design principles:             • Moments found in                  • Stress and strain (Hooke’s           (inspection during and      Describe and compare        welding and stress relieving:
                         STEEL WORKS:                                            engineering components               law)                             after completion of oxy-    the following non-          • Shrinkage of welded joint
                         Determine graphically the magnitude and                 (by calculation only)          • Comprehensive/                       acetylene and arc           destructive tests:          • Identify the factors affecting
                         nature of forces on the members of frameworks      • A simple support beam with              tensile stresses                 welding):                   • Visual inspection              distortion and residual stress
                         with a maximum of 11 (eleven) parts. (Only              two vertical point loads and   • Young’s modulus of                   • Clean bead                • X-rays                    • Methods to prevent or reduce
                         parallel and vertical loads). Calculate the             one uniformly distributed            elasticity (include the factor   • Constant width and        • Dye penetration                distortion and stress
                         reactions                                               load (UDL) acting on the             of safety)                            height of bead         • Ultrasonic test           • Identify and apply stress-
                                                                                 beam (including reactions      • Determine change in length           • Presence of pits          Practical:                       relieving heat treatment
                                                                                 at the support)                      (∆l)                             • Undercutting                                               processes
                                                                                                                                                                                   Perform the above non-
                                                                            • A simple supported beam           • Stress/strain diagram                • Distortion                                            • Describe the effect of change
                                                                                                                                                                                   destructive tests on a
                                                                                 with three vertical point      Practical:                             • Cracks                    welded joint to identify         in temperature on steel
                                                                                 loads and without uniformly    Do calculations on stress and          • Spatter                   defects                     Practical:
                                                                                 distributed load (UDL)         strain whilst taking into              • Slag inclusion                                        Identify the factors that lead to
                                                                                 acting on the beam             consideration Young’s modulus          • Start and                                             distortion and residual stresses
                                                                            • Calculate the reactions at        for each material                           termination of weld                                within a welded joint
                                                                                 the supports                                                          • Correct flame
                                                                            • Calculate the bending                                                    • Pressure
                                                                                 moments at each and shear                                             • Current
                                                                                 forces between points
                                                                                                                                                       Application of
                                                                            DRAW THE FOLLOWING                                                         destructive tests on
                                                                            DIAGRAMS TO SCALE:                                                         welded joints:
                                                                            • Space diagram                                                            • Nick break
                                                                            • Bending moment diagram                                                   • Nick bend
                                                                            • Shear force diagram                                                      • Machinability tests
                         Practical:                                                                                                                    Practical:
                         Do calculations of moments and using a bending moment tester, perform a bending moment test on a beam                         Perform destructive tests
                                                                                                                                                       on a welded joint using
                                                                                                                                                       nick break, nick bend and
                                                                                                                                                       machinability test to
                                                                                                                                                       identify defects
 SBA (FORMAL)            EXAMINATION
                         PAT - Phase 2
                         Occupational Health and Safety Act, Act 85 of 1993, as amended, read with the Hazardous Biological Agents Regulations. Section 8 (1) of the Occupational Health and Safety (OHS) Act, Act 85 of 1993
                         Safe work practices are types of administrative controls that include procedures for safe and proper work used to reduce the duration, frequency, or intensity of exposure to a hazard. Examples of safe work practices for SANS: Requiring regular hand washing or using of
                         alcohol-based hand rubs. Learners and teachers should always wash hands when they are visibly soiled and after removing any PPE. Keep safe distances and wear a mask at all times
                         See the document on the workshop safety measures

                                                                         Downloaded from hlayiso.com                                                                                                                                                                                                      2

### Page 3

2023/24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING & METALWORK): GRADE 12

2023/24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING & METALWORK): GRADE 12 (TERM 3)

 TERM 3                                  WEEK 1                           WEEK 2                       WEEK 3                    WEEK 4                   WEEK 5                     WEEK 6                    WEEK 7                    WEEK 8                WEEK 9            WEEK 10           WEEK 11
 CAPS TOPICS (NO              Maintenance (specific)                                           Terminology (development) (specific)                                                                                                                         Trial exam        Trial exam        Trial exam
 DEVIATIONS FROM
 CAPS)
 TOPICS/CONCEPTS,             Suitable preventative            Suitable preventative           Marking off template       Marking off template      Marking off template     Marking off template       Marking off template      Marking off template
 SKILLS AND VALUES            maintenance in operating         maintenance in operating        by calculation only        by calculation only       by calculation only      by calculation only        by calculation only       by calculation only
                              systems for guillotine,          systems for roller, punch       of the following           of the following          of the following         of the following           of the following          of the following
                              pedestal drill, power saw        and shearing machine and        between horizontal         between horizontal        between horizontal       between horizontal         between horizontal        between horizontal
                              Identify causes of               pedestal grinder                parallel planes:           parallel planes:          parallel planes:         parallel planes:           parallel planes:          parallel planes:
                              malfunction of:                  Identify causes of              A cone frustum of          A cone frustum of         Square to round          Square to round            Hoppers with square       Hoppers with square
                              • Lack of lubrication or         malfunction of:                 slight taper               slight taper              transformers (on         transformers (on           or rectangular            or rectangular
                                   incorrect lubrication       • Lack of lubrication or                                                             centre only)             centre only)               openings (on and off      openings (on and off
                              • Overloading friction                incorrect lubrication                                                                                                               centre)                   centre)
                                                               • Overloading friction

                              Practical:                                                       Practical:
                              Perform periodic maintenance as prescribed by manufactures       Do calculations on cone frustum, square to round transition and hoppers
                              on specific machines
               INFORMAL       Classwork/case studies/worksheets/homework/class tests (theory and practical work)
               ASSESSMENT:

  ASSESSMENT
               REMEDIATION
               SBA (FORMAL)   Preparatory examination
                              PAT - Phase 3 and 4 finalisation
                              Occupational Health and Safety Act, Act 85 of 1993, as amended, read with the Hazardous Biological Agents Regulations. Section 8 (1) of the Occupational Health and Safety (OHS) Act, Act 85 of 1993. Safe work practices are types of administrative controls that include
                              procedures for safe and proper work used to reduce the duration, frequency, or intensity of exposure to a hazard. Examples of safe work practices for SANS: Requiring regular hand washing or using of alcohol-based hand rubs. Learners and teachers should always wash
                              hands when they are visibly soiled and after removing any PPE. Keep safe distances and wear a mask at all times. See the document on the workshop safety measures

                                                                              Downloaded from hlayiso.com                                                                                                                                                                                                    3

### Page 4

2023/24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING & METALWORK): GRADE 12

2023/24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING & METALWORK): GRADE 12 (TERM 4)

 TERM 4                              WEEK 1                     WEEK 2                    WEEK 3                     WEEK 4           WEEK 5           WEEK 6           WEEK 7           WEEK 8           WEEK 9           WEEK 10
 CAPS TOPICS (NO              Revision                  Revision                   Revision                  Exams            Exams            Exams            Exams            Exams            Exams            Exams
 DEVIATIONS FROM
 CAPS)
               INFORMAL       Classwork/case studies/worksheets/homework/class tests (theory and practical work)
               ASSESSMENT:

  ASSESSMENT
               REMEDIATION

               SBA (FORMAL)   Final examination                                                                                                                                                   Exams            Exams

                                                                            Downloaded from hlayiso.com                                                                                                                              4

## Related documents

- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — Mechanical Technology · QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Fitting and Machining) MG Afr](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-memorandum-afrikaans/03c703c8-8125-4d5a-a124-37013b381c7a) — Mechanical Technology · Memo · 2024 · Afr
- [Mechanical Technology May-June 2024 (Welding and Metalwork) MG Afr](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-memorandum-afrikaans/552ebeca-d294-4c37-b3fb-cded79fa438f) — Mechanical Technology · Memo · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — Mechanical Technology · QP · 2024 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Mechanical Technology · Memo · 2023 · Afr
- [MECH TECH GR12 MEMO SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1) — Mechanical Technology · Memo · 2023 · Eng

## More from Grade 12 Mechanical Technology

- [MECHANICAL TECH (Auto) GR12 MEMO SEPT2023 English](https://www.hlayiso.com/library/mechanical-tech-auto-gr12-memo-sept2023-english/dfc975c1-e179-4741-8d4f-e3b20c744c7e) — Memo · 2023 · Eng
- [MEC TECH GR12 MEMO SEPT2023 Fitting English](https://www.hlayiso.com/library/mec-tech-gr12-memo-sept2023-fitting-english/48945e78-f50a-4241-bab7-b94b61c60f49) — Memo · 2023 · Eng
- [MECH TECH GR12 QP SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept2023-welding-english/49e9215c-dc78-48c3-a526-4baaf59158d8) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-eng/1523a16f-2012-4f13-a922-86cbb5900666) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Automotive) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-afr/8d31d25d-e192-4aa9-b448-efab233391a1) — QP · 2023 · Afr

## Collection

- [Grade 12 Annual teaching plans](https://www.hlayiso.com/annual-teaching-plans/grade-12)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
