# Design Grade 12 P1 Eastern Cape Mock 2017 Memo (English)

> Grade 12 Design Paper 1 memorandum from the Eastern Cape Mock Exam 2017 (English), 39 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/gr12-dsgn-p1-sept2017-memo-eng/3fc35a33-0f5c-4733-9003-2d29f1c514a5
- Updated: 2026-09-27
- Subject: Design
- Grade: Grade 12
- Document type: Memorandum
- Year: 2017
- Exam period: Eastern Cape Mock Exam
- Paper: 1
- Curriculum: CAPS
- Pages: 39

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Design](https://www.hlayiso.com/library/grade-12/design) › [Design Grade 12 P1 Eastern Cape Mock 2017 Memo (English)](https://www.hlayiso.com/library/gr12-dsgn-p1-sept2017-memo-eng/3fc35a33-0f5c-4733-9003-2d29f1c514a5)

## About this document

Design · Grade 12 · Eastern Cape Mock Exam · 2017. Memorandum, 39 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                        NATIONAL
                   SENIOR CERTIFICATE

                          GRADE 12

                    SEPTEMBER 2017

                 DESIGN P1 (THEORY)
                 MARKING GUIDELINE

MARKS:   100

               This marking guideline consists of 39 pages.

### Page 2

Downloaded from hlayiso.com
2                                        DESIGN P1                          (EC/SEPTEMBER 2017)

 SECTION A: DESIGN LITERACY (30 marks in total)

      Understand design theory and use design terminology correctly.
      The recognition of the characteristics of each movement in all four
       categories of design.
      Understand and interpret signs and symbols, stereotyping, bias and
       prejudice in design.

 QUESTION 1: ‘UNSEEN’ DESIGNS TESTING VISUAL LITERACY

 1.1     1.1.1   (Allocate 2 marks)
                  The product seen in FIGURE A is suitable for the tourist market as
                    the national flower of South Africa, the Protea, is seen displayed as
                    the image on the bangle. Overseas visitors would delight in
                    purchasing a product which shows displays a national symbol of the
                    country of which they visit. 
                  Any woman in South Africa who feels national pride and who
                    appreciates the flora of our country would feel proud to wear a
                    beautiful fashion accessory as seen in FIGURE A which displays the
                    Protea flower, South Africa’s national flower.                               (2)

         1.1.2   (Allocate 8 marks)
                 Shape and form (element):
                  The image on FIGURE A makes use of flat, stylised, organic shapes
                     of a Protea flower with its petals and leaves the different sizes which
                     bring variety to the design. 
                  Whilst the image of the Protea is flat and 2-dimensional, it is engraved
                     onto Perspex in the form of a 3-dimensional bangle for the purpose
                     of wrapping around the wearers’ arm. 

                 Balance (principle):
                  Balance refers to the visual weight in design. The bangle seen in
                    FIGURE A shows asymmetrical balance as there is a contrast in size
                    of the engraved image, as on one side of the bangle the large head
                    of the Protea flower is shown visually balancing/creating an
                    equilibrium with the compacted petals and leaves on the other side of
                    the bangle. Unity with variety of visually balanced images create
                    harmony in the design. 

                 Movement/rhythm (principle):
                  Rhythm is created through the repetition of the protea petals and
                   leaves creating a gentle flow in the design. 
                  Implied movement is shown in this fixed image as it does not have
                   the ability to move, however a rhythmic movement is created with the
                   protea petals and leaves facing in the same direction, which creates
                   a continuous and harmonious feel to the design. 
                  Rhythm is created through the repetition of similar images such as
                   the outer edges of the protea petals and leaves forming the shape of
                   the bangle which creates interest and variety in the design. 

Copyright reserved                                                               Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                            DESIGN P1                                          3

                 Focal point/emphasis (principle):
                  The focus/emphasis is placed on the image of the Protea on the
                    bracelet, with the flower head and leaves, due to the fact that there is
                    a strong contrast of the striking gold linear image of the Protea against
                    the transparent Perspex of the bangle. 
                  The focus/emphasis can also be said to be on the outline/contour
                    shape of the bangle as the edge of the Protea petals create the outer
                    edge of the bangle, which also creates a striking contrast to the very
                    flat Perspex material used to create the bangle. 
                  The focus/emphasis of the image on the bracelet is the head of the
                    protea flower as it is larger and more dominant than the rest of the
                    image. It is also a very different shape to the petals and leaves shown
                    throughout the rest of the design. The effect created is the element of
                    surprise, by adding something different. 
                 Credit any well-reasoned answer.                                                       (8)
                                                                                                       [10]
                      Q1.1     COGNITIVE
                                                  WEIGHTING        QUESTIONS           MARKS
                     LEVEL       SKILLS
                     Lower     Observation /                        Part of 1.1.1
                                                      30%                                 1+1
                      order   Comprehension                         Part of 1.1.2
                     Middle
                                Application           40%           Part of 1.1.2          5
                      order
                                 Analysis
                     Higher     Synthesis                           Part of 1.1.1
                                                      30%                                 1+2
                     order     Evaluation /                         Part of 1.1.2
                                Deduction

                                                    OR
 1.2    1.2.1    (Allocate 8 marks)
                 Tone/Tonal value:
                  A tone/tonal value of a colour is when a lighter or darker version of the
                    same colour is used. The white colour that dominates the design of
                    the lamp seen in FIGURE B is brought to life with the lamp lighting up.
                    A wide range of tonal values of white is seen as the light is illuminated.
                    This monochromatic range of whites create a gentle and sophisticated
                    harmony. 

                 Unity and variety:
                  Unity is achieved due to the repetition of petal-like shapes.  These
                   petal-like shapes, which open and close and resemble a lotus flower,
                   are varied in size as they are larger at the base of the lamp and
                   decrease in size towards the top of the lamp, which creates variety.
                   This unity, along with the variety, creates harmony in the design of the
                   lamp, as all the parts work together to achieve a coherence of the
                   whole creating harmony to form a successful whole. 

                 Texture:
                  The lamp has tactile smooth quality as it appears to be made from
                   Perspex or plastic.  This smooth surface brings a level of
                   sophistication and quietness to the design. 

Copyright reserved                                                                  Please turn over

### Page 4

Downloaded from hlayiso.com
4                                        DESIGN P1                          (EC/SEPTEMBER 2017)

                 Pattern:
                  Pattern occurs when shapes are repeated. In FIGURE B pattern is
                   evident in the bands of organic petal-like shapes being repeated to
                   create the overall form of a lotus flower. The repetition of these bands
                   of petal-like shapes around the form of the lamp gives the design
                   unity. 
                  With the repeating of the same organic petal-like shapes throughout
                   the design of the lamp, all the parts work together to achieve a
                   coherence of the whole creating harmony to form a successful
                   whole. 
                  The pattern of the lamp is very modular as it is composed of many
                   different parts/shapes which are repeated. This pattern appears to
                   resemble the petals of a flower turning a conventionally static object
                   into a playful, tactile experience as the petal-like shapes are able to
                   open up into what appears to be a flower in full bloom. 
                 Credit any other well-reasoned answer.                                           (8)

        1.2.2    (Allocate 2 marks)
                  Bio-mimicry means imitate and is the practice of learning from and
                    then emulating natural forms to solve human problems and create
                    more sustainable designs. Bio-mimicry is therefore evident in
                    FIGURE B as the lamp is composed of petal-like shapes which are
                    able to open up/expand outwards revealing more illumination from the
                    lighting device which is central to the design.  This mimics the
                    opening and full bloom of a flower. 
                 Credit any other well-reasoned answer.                                           (2)
                                                                                                  [10]

                      Q1.2     COGNITIVE
                                                WEIGHTING        QUESTIONS         MARKS
                     LEVEL       SKILLS
                     Lower     Observation /                      Part of 1.2.1
                                                     30%                              2+1
                      order   Comprehension                       Part of 1.2.2
                     Middle                                       Part of 1.2.1
                                Application          40%                              4+1
                      order                                       Part of 1.2.2
                                 Analysis
                     Higher     Synthesis
                                                     30%          Part of 1.2.1        2
                     order     Evaluation /
                                Deduction

Copyright reserved                                                                Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                            DESIGN P1                                            5

 QUESTION 2: COMMUNICATION THROUGH DESIGN

 2.1    2.1.1    (Allocate 1 mark)
                 MESSAGE CONVEYED BY THE POSTER
                 The message conveyed in the poster is the social issue relating to the
                 danger of cyber bulling and how it could even lead to victims committing
                 suicide. Through the message of the poster there is an offer of advice
                 and guidance for young people who are affected by both cyber and offline
                 bullying, by allowing them to connect online with fully trained online
                 counsellors. 
                 Credit any other well-reasoned answer.                                                 (1)

        2.1.2    (Allocate 4 marks)
                  Symbolically the centrally placed silhouette of the open hand shows
                    that the person/victim of cyber bullying is exposed, vulnerable and
                    feeling weak. 
                  The layout shows a centrally placed silhouette on a black background
                    which symbolises that the victim does not have an identity,  that this
                    is simply another unidentified person suffering from this form of abuse,
                    feeling emotionally empty. This simple, stylised image is bold and
                    dramatic showing the victim is isolated, surrounded by darkness and
                    in a seemingly empty black void. 
                  All the bold text, diminishing in size the further away it is seen falling
                    away from the victims arm alludes to the victim being overweight as
                    words such as ‘fatty’, ‘lard ass’, ‘loser’, ‘pizza face’, et cetera are used.
                    This reinforces the message from bullies that they aim to diminish the
                    victim until they have completely faded away, just like the cruel
                    comments.  This text of cruel comments is also seen in bold red
                    colour, symbolising danger and fear. 
                  The red text across the wrist of the victim symbolically portrays that
                    the person is slitting his or her wrist and bleeding in an attempt to kill
                    the emotional pain or commit suicide. 
                  Simple white and also red sans-serif typeface against a black
                    background effectively conveys the powerful message at the top of
                    the poster, with the slogan ‘Sticks and stones may break my bones,
                    but words can kill’.  The clear and simple sans-serif text, then
                    changing to dramatic red colour, offers advice and guidance for young
                    people who are affected by both cyber and offline bullying, by allowing
                    them to connect online with fully trained online counsellors. 
                 Credit any other well-reasoned answer.                                                 (4)

        2.1.3    (Allocate 2 marks)
                 THE GESTALT PRINCIPLE OF FIGURE AND GROUND  can be
                 applied as the silhouette of the hand is naturally perceived as figure
                 (object) while the surrounding area is perceived as ground
                 (background). 
                 Credit any other well-reasoned answer.                                                 (2)

Copyright reserved                                                                  Please turn over

### Page 6

Downloaded from hlayiso.com
6                                         DESIGN P1                          (EC/SEPTEMBER 2017)

 2.2    2.2.1    (Allocate 1 mark)
                  A stereotype is a fixed impression on groups of people or individuals
                    having certain characteristics, or fulfilling prescribed roles. Therefore
                    the possible stereotype that can be applied to the poster in FIGURE B
                    is seen in that it idealises Desmond Tutu as a peaceful and religious
                    icon, without taking into consideration that like every other human
                    being he has inherent human flaws. 
                 Credit any other well-reasoned answer.                                            (1)

        2.2.2    (Allocate 2 marks)
                  Desmond Tutu is seen wearing a cross (crucifix) on a chain, a symbol
                    of the Christian faith which he follows. 
                  The white dove is seen on Desmond Tutu’s shoulder. This is a
                    stereotypical symbol and demonstrates the message of peace and
                    purity in the design. 
                  Angels blowing their trumpets are seen in the top corners of the poster
                    design. This Christian symbol also supports the personal Christian
                    trait of Desmond Tutu which communicates the idea of goodness and
                    purity through his spiritual guiding of people. 
                  Desmond Tutu’s hands are seen in the symbolic giving gesture. This
                    symbolic positioning of his hands demonstrates his open and giving
                    nature and how is he has a servant-attitude to the people that he
                    guides. 
                  The entire illustration appears to represent Christianity. The beautiful
                    sinuous curved plant-like design in the background resembles a
                    Gothic stained-glass window, in the typical pointed arch style, as seen
                    in cathedrals. Gothic style font is used to display the name of
                    Desmond Tutu. 
                  The all-seeing, all-knowing eye of God at the top of the poster design
                    is understood as a symbol of protection and healing, and guidance of
                    divine power. 
                 Credit any other well-reasoned answer.                                             (2)
                                                                                                   [10]

                      Q2       COGNITIVE         WEIGHTING
                                                                   QUESTIONS        MARKS
                     LEVEL       SKILLS              %
                               Observation /                          2.1.1
                     Lower
                                 Recall /             30%          Part of 2.1.2     1+1+1
                     order
                              Comprehension                        Part of 2.1.3
                                                                   Part of 2.1.2
                     Middle
                                Application           40%          Part of 2.1.3     2+1+1
                     order
                                                                   Part of 2.2.2
                                                                      2.2.1
                     Higher    Evaluation /
                                                      30%          Part of 2.1.3     1+1+1
                     order      Deduction
                                                                   Part of 2.2.2

Copyright reserved                                                                 Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                           DESIGN P1                                           7

 QUESTION 3

 Answer EITHER QUESTION 3.1 or QUESTION 3.2.

 3.1    (Allocate 10 marks)
        The marking guideline has only been written in bullet form to facilitate
        marking.
        Candidates must write a single essay, without the use of bullets, to show
        their ability to evaluate and compare through the application of factual
        information.

        MATERIALS:
        The Xhosa bridal necklace in FIGURE A is made predominantly from glass
        beads in a variety of colours, constructed with thread and also including a few
        mother-of-pearl buttons.  The Indian bridal necklace in FIGURE B is very lavish
        and extravagant in comparison to the Xhosa beaded bridal necklace with semi-
        precious stones such as rubies and pearls set in gold. Gold is considered an
        essential ritual metal when it comes to weddings in India.  The monetary value
        of the Indian bridal necklace is much higher than the Xhosa bridal necklace due
        to the high value of the materials used, yet both are very rich in their significance
        and symbolism for the wedding ceremony.  This does not mean that the Xhosa
        bridal necklace’s value is inferior relative to that of the Indian necklace.

        SHAPE AND PATTERN:
        In FIGURE A, the traditional diamond-patterned bead collar-style decoration is
        seen encircling the bride’s neck and falling gently onto her chest and shoulders.
        On top of this, a long, narrow white beaded band with diamond shapes woven
        into it, is also placed around the bride’s neck, with beaded tassels falling vertically
        down the front of the bride’s chest.  The shapes seen in the Xhosa bridal
        necklace are all geometric, with the zig-zag formation of the beadwork in the
        collar creating the diamond shapes.  In FIGURE B the jewelled necklace is
        composed of three rows of semi-precious stones set in gold, also fitting around
        the bride’s neck, with a large pendant drop design falling vertically from the front
        of the tiered necklace. 
        In the Indian bridal necklace paisley shapes are seen in the three tiers/rows
        around her neck, with a rectangular shaped section at the front. From this hangs
        an elaborate cluster consisting of a large paisley shaped stone with smaller
        paisleys radiating out from this and edged with round pearls.  Both FIGURE A
        and FIGURE B show symmetrical designs with both sides of the bridal necklace
        being the same, however the use of space with pattern of the Xhosa design is
        less saturated/crowded than the pattern formations seen in the Indian design. 
        In both designs one sees shapes of either beads or semi-precious stones which,
        when repeated, forms beautiful patterned designs. 

        UNITY:
        Unity is achieved in the way that all the elements in the design are organised,
        like the use of specific colours, the even distribution of colours, choice of
        materials, shape, texture and line, as seen in both FIGURE A and also
        FIGURE B. 
        In FIGURE A, both the collar of the Xhosa bridal necklace and also the long
        overlay band contain diamond shapes, all consist of the same colours and both
        sections of the necklace is made from glass beads, which unify the entire design.

Copyright reserved                                                                Please turn over

### Page 8

Downloaded from hlayiso.com
8                                        DESIGN P1                         (EC/SEPTEMBER 2017)

        The overlapping of the two sections also unites the two into one design. Unity
        and harmony are thus created through the organisation of all these elements. 
        In FIGURE B, the entire necklace is made from gold and set with paisley-shaped
        segments and pearls which are distributed evenly throughout the design, which
        unifies the design, creating a balanced and unified whole. 

        AESTHETIC APPEAL:
        With both the Xhosa bridal necklace in FIGURE A and the Indian bridal necklace
        seen in FIGURE B, the bead work communicates the wearer’s social status and
        wealth.  Both cultures use specific colours in their traditional bridal ceremonies
        because by doing so the ritual performance or the tradition is retained.  Xhosa
        beadwork is also often sought after in the tourism market as many overseas
        visitors purchase these items as mementos of their South African experience as
        the beadwork offers authentic African origin and expression.  The elaborate
        Indian necklaces are often very valuable with the gold and semi-precious stones
        and perhaps even diamonds. The wife will wear the necklace from the wedding
        ceremony as long as she or her husband is alive as a sign of their love and
        commitment to one another.  The Xhosa bridal necklace is more simplified with
        its geometric pattern formations compared to the elaborate, richly ornate Indian
        bridal necklace, but each design represents of its own valuable culture through
        the traditional bridal ceremony. 

        PRODUCTION TECHNIQUE:
        FIGURE A shows a beaded Xhosa bridal necklace. This hand-made beaded
        necklace is crafted by women.  Their beadwork is a way of communicating
        without words. This is done through patterns, styles and colours and each is
        particular to a specific group. Therefore, the wedding necklace holds symbolic
        meaning for this special occasion as messages are woven into decorative
        geometric designs.  FIGURE B shows a bridal necklace manufactured from
        metal such as gold and inlaid with semi-precious stones, the hanging pendant
        portion trimmed with pearls.  These bridal necklaces are largely mass
        produced unless a unique hand-crafted necklace made by a jeweller is
        desired. 
        Credit any other well-reasoned answer.                                                   [10]

          Q3.1          COGNITIVE             WEIGHTING
                                                                QUESTIONS        MARKS
         LEVEL            SKILLS                  %
                        Knowledge /
          Lower
                           Recall                    30%         Part of 3.1         3
          order
                       Comprehension
         Middle         Application of
                                                     40%         Part of 3.1         4
         order            elements
                          Analysis
         Higher
                         Synthesis                   30%         Part of 3.1         3
         order
                         Evaluation

                                               OR

Copyright reserved                                                              Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                          DESIGN P1                                        9

 3.2    (Allocate 10 marks)
        The marking guideline has only been written in bullet form to facilitate
        marking.
        Candidates must write a single essay, without the use of bullets, to show
        their ability to evaluate and compare through the application of factual
        information.

        In this question, the candidate is expected to compare and should be
        penalised for writing two separate essays, or for information supplied in a
        table form (maximum 3 out of 10).

        This comparative essay compares the SA Perm Building in FIGURE C
        with the Pantheon Temple, a Classical Roman building. The candidate
        may choose any other suitable example for the comparison.

        CONTEXT:
         The Roman Pantheon is an example of a Roman temple, whereas the SA
          Perm Building is a contemporary public/secular building showing influences
          and features of ancient Roman architecture. 

        PURPOSE/FUNCTION:
         The purpose of the Pantheon is not known for certain but the name, porch
          and pediment decoration suggest a temple of some sort.  The Pantheon
          may have been designed as a place where the emperor could make public
          appearances in a setting, which reminded onlookers of his divine status as
          equal to the other gods of the Roman Pantheon.  The purpose of the SA
          Perm Building is for the facility of banking investments and conducting
          financial transactions. 

        LAYOUT/PLAN:
         From the outside, both the Pantheon and the SA Perm Building appear as a
          solid, closed collection of geometric forms. 
         The Pantheon is one solid, circular form under a coffered concrete dome, with
          a central opening (an oculus of 8,3 m in diameter) to the sky. This oculus
          floods natural light into the circular form, known as the rotunda.  However,
          although the SA Perm Building is not circular, but featuring rectangular interior
          spaces, there is a large central skylight down the spine of the building which
          floods natural light into the interior. 
         Both buildings have interior spaces filled with glowing light due to the vaulted
          forms and the light flowing in from the light source overhead. 
         The Pantheon is fronted by a large portico/porch of large, vertical granite
          Corinthian columns under a triangular pediment, almost appearing to be a
          separate section attached to the rotunda,  whereas the entrance of the SA
          Perm Building is flush with the front façade of the building and features sturdy
          concrete columns underneath an arch and a roof structure somewhat
          reminiscent of a Greek pediment. 
         The large rotunda section allows for a large gathering of people  and the SA
          Perm Building allows access for a controlled amount of people to enter and
          conduct their financial requirements. 
         The interiors of both the Pantheon and the SA Perm Building are encircled by
          columns; marble Corinthian columns are set on either side of niches
          containing statues of deities in the Pantheon,  whilst the SA Perm Building’s
Copyright reserved                                                             Please turn over

### Page 10

Downloaded from hlayiso.com
10                                     DESIGN P1                            (EC/SEPTEMBER 2017)

            cast concrete columns are slender with plain capitals and seen forming
            colonnades within the large entrance/foyer. 

        MATERIALS AND PRODUCTION TECHNIQUES:
         The Pantheon, made from a Roman concrete known as mortar, is clad in
          marble.  The dome is coffered to help reduce its weight; it is 6,4 m thick at
          the base and 1,2 m thick at the oculus. The bottom of the dome is made from
          mortar/concrete, then lighter materials, ending off with light porous pumice
          stone at the top.  The downward thrust of the dome is carried by 8 barrel
          vaults in the 6,4 m thick wall. 
         The SA Perm Building is constructed from red facebrick and reinforced
          concrete, steel and glass.  Modern machinery and technology was used for
          construction of this contemporary building.  Being a facility dealing with
          substantial amounts of money, it would then have an integrated building
          control system allowing for efficient and centralised operation programming,
          including surveillance, alarm systems, electric systems, etc. 

        RELATION TO THE SITE:
         The Pantheon dominates the site on which it was built, with streets on all
           sides of the building.  The SA Perm Building steps directly off the busy
           pavement in High Street in Grahamstown, the main street of the town. 
        Credit any other well-reasoned information.                                               [10]

          Q3.2         COGNITIVE
                                         WEIGHTING %         QUESTION            MARKS
         LEVEL           SKILLS
         Lower         Knowledge,
                                               30%            Part of 3.2            3
          order       Comprehension
         Middle
                       Application             40%            Part of 3.2            4
          order
                         Analysis
         Higher
                        Synthesis              30%            Part of 3.2            3
         order
                        Evaluation

                                                                  TOTAL SECTION A:                30

Copyright reserved                                                              Please turn over

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                         DESIGN P1                                     11

 SECTION B: DESIGN HISTORY

      History of Design: Including Greece, Rome, Gothic, Baroque, Rococo,
       Neoclassical, Victorian, Arts and Crafts, Art Nouveau, Bauhaus, Art Deco,
       Scandinavian, De Stijl, Modernism, Popular Culture, Pop/New Age and Post
       Modernism.
      An overview of architecture, in which classical examples are compared with
       contemporary works.
      Visual Analysis (unseen examples of design): basic terminology that
       describes and underpins design and characteristics, to be used with
       confidence.

 QUESTION 4 (30 marks)

 4.1     (Allocate 20 marks in total)

         LEARNERS MUST CHOOSE TWO FROM A POSSIBLE NINE DESIGN
         MOVEMENTS/STYLES/TIME PERIODS.

         NOTE:
         For each of the styles or movements candidates must emphasise the
         characteristics of that movement that reflect on the quote included.
         The chairs as seen in FIGURE A are merely to assist the candidates with
         recalling characteristics of the movements/styles. They may refer to any
         architecture structures or products from the chosen movement/style.

         ‘The designer’s true role is to better the things which surround us not only in
         terms of function, appearance, cost and material but also in terms of aspiration
         and desire – in the dream of how good life might be.’             Terence Conran

         BAUHAUS
         The movement/style in context: (Allocate 1 mark)
          The Bauhaus was founded in a time when the German zeitgeist turned from
            emotional Expressionism to the matter-of-fact New Objectivity. 
          They tried to find solutions for the problems faced by the working classes
            during the depression years of post-World War I Germany.  They used
            technology to create adequate housing and the development of high-quality,
            useful, mass-produced consumer goods that were well made.  In order to
            improve their lifestyles, they desired to achieve aesthetically pleasing and
            functional products. 
         Credit any other well-reasoned answer.                                                 (1)

         Aims: (Allocate 1 mark)
          To provide healthy housing for a growing urban population under difficult
            economic conditions. 
          To take advantage of new technologies. 
          To achieve a breakthrough for rational and functional form in design
            (rationalism and functionalism emphasised). 
          To make products affordable for the masses through cost-cutting industrial
            mass production. 

Copyright reserved                                                           Please turn over

### Page 12

Downloaded from hlayiso.com
12                                      DESIGN P1                          (EC/SEPTEMBER 2017)

         Their main objective was to re-image the material world and to reflect the unity
           of all the arts. 
         The Bauhaus school aimed to train their students to create designs that
           reflected the machine age,  so that designs were pure, simple and
           functional. 
         They aimed to join all art and craft as a functional whole. 
        Credit any other well-reasoned answer.                                                   (1)

        Influences: (Allocate 2 marks)
         Bauhaus style was influenced by the simple unadorned furniture of the Arts
            and Crafts movement. 
         By the Cubist movement which believed in reducing objects to their most
            basic forms (the cube, cylinder and sphere). 
         By the De Stijl movement which created impersonal, abstract works of square
            and rectangular blocks of primary colours separated by vertical and horizontal
            lines of black or white; also by the smooth surfaces which looked as if created
            by machine and were based on mathematics. 
         By the American architect Louis Sullivan through his quote: ‘Form Follows
            Function’. This meant that objects adhered to the principle of purity and form
            and were left unadorned. 
        Credit any other well-reasoned answer.                                                   (2)

        Characteristics: (Allocate 5 marks)
         Initially the focus was on hand production using natural materials, then the
          focus shifted to incorporation of technology and industrial processes to create
          modern design. 
         The Bauhaus can therefore be seen to be functionalist rather than expressive
          and decorative. They encouraged design for mass production. 
         Design was modern, simple, quality focussed through production and
          manufacturing, universal, and functional. 
         Bauhaus design shuns ornamentation and favours simplicity, function and
          elegance. 
         They used asymmetry and regularity instead of symmetry. 
         Purity of form. 
         They stressed ‘truth to materials’ and ‘form follows function’. 
         Used new materials and technology like reinforced concrete. 
         They used geometric shapes. 
         Lines were mostly straight and forms geometric. 
         Colours were mostly the untreated colour of the materials, such as steel and
          concrete and wood  or pure, primary colours were used. 
         Surfaces were smooth, cold and impersonal. 
         They introduced different materials and techniques in simple, practical
          projects. 
         Dematerialised the conservative forms of furniture – e.g. furniture must be in
          its most basic and essential forms, stripped of decoration. 
         They produced prefabricated furniture. 
         They placed emphasis on examining the formal and physical properties of
          materials. 
         Chairs were simple and unadorned; light tubular steel frames were used for
          open structured chairs  that could be mass produced. 

Copyright reserved                                                              Please turn over

### Page 13

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                         DESIGN P1                                      13

         Architecture had many features such as: steel-frame construction, a glass
           curtain wall, reinforced concrete, open-plan layout with moveable inside walls,
           undecorated facades, all services concealed in a central core of the building,
           reinforced concrete, cube-like structures, prefabricated units, machine-made
           components, purity of form. 
        Credit any other well-reasoned answer.                                                   (5)

        Designer and a work: (Allocate 1 mark)
         Cantilever Chair – by Mies van der Rohe 
         Tubular Chair – by Mies van der Rohe 
         The Barcelona Chair – by Mies van der Rohe
         Zig-Zag Chair – by Gerrit Rietveld 
         Wassily Chair – by Marcel Breuer 
         Tac Tea Pot – by Walter Gropius 
         ‘Cradle’ – by Peter Keler 
         Tea-extract pot 1924 – by Marianne Brandt 
         ‘Ceiling Lamp’ – by Marianne Brandt                                                    (1)
                                                                                                 (20)
                                            AND/OR
        GOTHIC
        The movement/style in context: (Allocate 1 mark)
         After the fall of the Roman Empire, Europe was in a state of confusion and it
           was during this period when disease, war, violence and starvation were
           common. 
         The sense of fear that developed, superstitious beliefs grew and the Christian
           church grew as the new authority replacing the Roman emperors. 
         The architectural style of the church developed into the Gothic style, with
           features and design motifs which evoke a spiritual or mystical atmosphere. 
        Credit any other well-reasoned answer.                                                   (1)

        Aims: (Allocate 1 mark)
         The church had to tower above the village reaching towards heaven, to be
           the central point of focus, to give all glory to God. 
        Credit any other well-reasoned answer.                                                   (1)

        Influences: (Allocate 2 marks)
         The state of confusion and fear experience during this period led the people
            to be drawn to strong belief systems, hence the building of very large
            churches and cathedrals. 
         The wealthy landowners, aristocrats, nobility and the Church 
         In architecture, the Roman basilica plan was adopted in the Gothic
            churches. 
        Credit any other well-reasoned answer.                                                   (2)

Copyright reserved                                                            Please turn over

### Page 14

Downloaded from hlayiso.com
14                                      DESIGN P1                          (EC/SEPTEMBER 2017)

        Characteristics: (Allocate 5 marks)
        Architecture:
         Due to this new triumphant phase of Christianity, the construction of
            magnificent cathedrals was all important. 
         In a practical manner, the buildings were designed to provide more space and
            use less building materials. 
         Main elements of Gothic architecture included pointed arches, flying
            buttresses, ribbed vaults and stained glass windows. 
         Arches were pointed as the thrust of the pointed arch is downwards,
            compared to the rounded arch from the Roman era with its sideward spread
            of weight. 
         The flying buttresses transferred the weight of the upward rising roof down to
            the ground – this allowed for large window spaces in the walls (in other words,
            the walls did not have to be the only support for the roof). 
         The cathedral was also a museum of art – used to teach by art the history of
            the world and Christianity. 
         The cathedral was also the sanctuary of the famous and illustrious dead. Their
            tombs were its decoration and its pride. 
        Furniture:
         Large and heavy, dark wooden furniture (Oak, Rosewood, Walnut) 
         The pointed arch, along with intricate carving, features on furniture designs. 
         Gothic upholstery displayed rich and dark colours, such as purple, ruby, black,
            ochre, forest green and gold. 
         Fabric designs included geometrical and foliage patterns. 
         Gothic furniture was formal and not designed for comfort. 
        Illuminated manuscripts:
         These are illustrated hand-produced books or manuscripts which had gold
            leaf decoration added to the images or type. The gold leaf would reflect light
            off the page creating the impression of illumination. 
         These manuscripts were mostly religious and were produced in monasteries;
            decoration could include decorated initials, borders and miniature
            illustrations. 
        Stained-glass windows:
         These windows illuminated and added to the atmosphere of the Gothic
            church. 
         They had a narrative function, often depicting biblical scenes. 
        Credit any other well-reasoned answer.                                                   (5)

        Designer and a work: (Allocate 1 mark)
         Architecture: Notre Dame Cathedral in Paris (1163-1250) 
         Architecture: Salisbury Cathedral in Britain (1220-1270) 
         Architecture: Chartres Cathedral in France (1140-1220) 
         Tapestry: ‘Lady with the Unicorn’ at Chateau Pierre d’Aubusson                         (1)
                                                                                                 (20)
                                            AND/OR

Copyright reserved                                                              Please turn over

### Page 15

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                          DESIGN P1                                      15

        ART NOUVEAU
        The movement/style in context: (Allocate 1 mark)
         They were also against (like Arts and Crafts movement) the unrefined mass
           produced articles of the late 19th century. 
         They created beautifully crafted objects  but unfortunately failed to move
           with the times as designs were difficult to mass produce. It was too
           expensive. 
        Credit any other well-reasoned answer.                                                    (1)

        Aims: (Allocate 1 mark)
        It grew out of the Arts and Crafts movement so some of the aims were similar:
         To establish close links between artists and craftsmen in the design of
            products. 
         To revive the tradition of using skilled craftsmen. 
         However, they did not reject the idea of factory made goods, but instead they
            wanted to transfer the quality of handmade products to factory made products
            and made use of modern materials, e.g. metal and steel (wrought iron work) 
        Credit any other well-reasoned answer.                                                    (1)

        Influences: (Allocate 2 marks)
         Nature: in their reference to the natural world such as peacocks, lilies and
            trailing plants. 
         Japanese woodprints: with its simple, flowing decorative lines,  stylised
            forms, grid patterns of room interiors, decorative patterns, and flat coloured
            shapes. 
         Alphonse Mucha: they were influenced by his paintings of women 
         Gustav Klimt: influenced by Klimt’s use of decorative pattern. 
         Celtic Art: with its elaborate, curving linear designs,  and decorative twisting
            ribbon-like patterns. 
         Viking designs: with their fine lines and spirals, lavish ornamentation and
            romantic ideas. 
         Symbolism (an art movement of that time period): with its flat areas of colour,
            organic curved outlines, and sensual designs with curves based on nature
            and the female form. 
         The Arts and Crafts movement: with their natural flowing forms. 
         Late Gothic style: with its flamboyant lines and stained glass. 
         French Rococo Art Period: with their delicate lines and forms as well as the
            light, playful atmosphere of movement influenced Art Nouveau. 
        Credit any other well-reasoned answer.                                                    (2)

        Characteristics: (Allocate 5 marks)
         Subject matter: animals, birds, plants. Very stylised roses (Rennie
          Mackintosh), sunflowers, lilies and peacocks, as well as sensuous female
          forms. 
         Products: textiles, ceramics, metal work, glassware, jewellery, furniture and
          architecture. 
         Materials: exotic materials, e.g. mother-of-pearl, lapis lazuli, ivory, iridescent
          coloured glass added to metal, ceramic jewellery ware and even furniture and
          wrought iron.  They used expensive materials like silk, velvet and
          embroidery for textiles.  They also used lacquered wood, inlaid with other

Copyright reserved                                                             Please turn over

### Page 16

Downloaded from hlayiso.com
16                                     DESIGN P1                         (EC/SEPTEMBER 2017)

           materials for furniture pieces.  Mosaics and stained glass were also
           popular. 
         Ornate and decorative. 
        Elements of Design:
         Line: whiplash line or serpentine line. Curvilinear and languid lines that are
           continuous and create stylised shapes. 
         Shape and Form: organic curvilinear shapes that reflect the rhythm of the
           whiplash line. 
         Colour: for interior they used subtle and subdued pastel colours, e.g. pinks,
           greens, yellows. 
         Colour: flat matt colour contained within curving outlines, generally used for
           poster illustrations, e.g. Posters by Mucha. 
        Principles of Design:
         Balance: predominantly asymmetrical 
         Contrast: large and small forms. Cool colours against warm ones. 
         Movement: the repetition of the whiplash line creates a sense of movement. 
        Credit any other well-reasoned answer.                                                 (5)

        Designer and a work: (Allocate 1 mark)
         Jewellery: ‘Dragonfly brooch’ by Rene Lalique 
         Art Nouveau brooch designed by Winifred Green 
         Lamps: ‘Lotus Tale Lamp’ by Louis Comfort Tiffany 
         Metal work: Cornet dragon gate by Antoni Gaudi 
         Interior: stairs in the Van Eetvelde House in Brussels by Victor Horta 
         Furniture: ‘Cabinet Vitrine’ by Gustave Serrurier-Bovy 
         Poster: ‘Pen’ poster by Alphonso Mucha 
         ‘Job’ poster by Alphonso Mucha                                                       (1)
                                                                                               (20)
                                           AND/OR
        ARTS AND CRAFTS MOVEMENT
        The movement/style in context: (Allocate 1 mark)
         Multi-storey buildings, factories, bridges and railway lines started to appear
           towards the end of the 19th century and rapid urbanisation often resulted in
           slums. 
         Factories proved to be serious health risks so the period was the beginning
           of socialism and protection of the rights of craftsmen. 
         This movement was a backlash against the forces of industrialisation in
           Britain. 
        Credit any other well-reasoned answer.                                                 (1)

        Aims: (Allocate 1 mark)
         To encourage the production of handmade quality goods of visually aesthetic
           value, as opposed to low quality, over fussy mass-produced products. 
         To improve the life of designers and crafters 
         To re-establish the value and involvement of the skilled craftsman and
           designer. 
         To encourage the design of simpler, less decorative products. 
         To create and make products using undecorated, natural materials (e.g. wood
           and stone). This was to reveal the natural beauty of the materials. 
         To bring back social order, stability and good Christian values. 
        Credit any other well-reasoned answer.                                                 (1)
Copyright reserved                                                           Please turn over

### Page 17

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                          DESIGN P1                                      17

        Influences: (Allocate 2 marks)
         The Medieval Gothic style,  a period associated with order, stability and
            good Christian values. This was represented in designs by the use of the
            pointed arch as well as the Quatrefoil and Trefoil motifs and included mythical
            themes such as dragons. 
         The Rustic English cottage style  – simple peasant or cottage style of
            architecture and handmade furniture – that made use of local materials left in
            their natural state (stone, wood), for example chairs with carved wood and
            woven seats. Floorboards were left bare and roof beams left exposed to
            reveal the natural beauty of the materials.  This is known as ‘truth to
            materials’. 
         Influenced by everyday life scenes (genre) from nature, e.g. animals and
            flower motifs. 
        Credit any other well-reasoned answer.                                                    (2)

        Characteristics: (Allocate 5 marks)
         The Arts and Crafts movement revived an interest in handicrafts such as
           embroidery, carving, block printing and stained glass windows. 
         Subject matter included plants, animals, birds and medieval design motifs
           (e.g. the trefoil and quatrefoil) 
         Products: textiles, furniture, ceramics, handmade leather-bound books, metal
           work and architecture. 
         Materials: natural materials such as wood and stone.  They sourced local
           materials where possible.  They used cast iron as the standard components
           in buildings as well as glass and steel. 
         Decoration: used to enhance the basic design – never for the sake of
           decoration alone.  Ornamentation kept to a minimum.  They stayed ‘true
           to materials’ in domestic arts (e.g. wood in furniture was not lacquered). 
           They mixed diverse elements such as turrets, pointed arches and Georgian
           windows. 
        Use of Elements and Principles:
         Shapes: were simple and austere without any additional decoration (e.g. as
           seen in furniture).  Textiles and ceramic designs were more organic due to
           the influence of plant and animals. 
         Colour: they made use of flat areas of bold colour in different shades of blue,
           yellow and red. They also made use of earth tones. 
         Balance: generally symmetrical due to the medieval Gothic influence of
           stability and order. 
         Unity: usually achieved through the repetition of organic lines or subject
           matter. 
        Credit any other well-reasoned answer.                                                    (5)

        Designer and a work: (Allocate 1 mark)
         Textile (tapestry): ‘The Strawberry Thief’ by William Morris 
         Furniture: Morris arm chair by William Morris 
         Architecture: The Red House by Phillip Webb                                             (1)
                                                                                                  (20)
                                            AND/OR

Copyright reserved                                                             Please turn over

### Page 18

Downloaded from hlayiso.com
18                                       DESIGN P1                           (EC/SEPTEMBER 2017)

        SCANDINAVIAN
        The movement/style in context: (Allocate 1 mark)
         Scandinavian design developed during the 1950s in Denmark, Norway,
           Sweden and Finland. 
         Immediately following World War II the availability of low-cost materials and
           methods for mass production made the concept of creating beautiful and
           functional everyday objects that could be afforded by everyone possible. 
        Credit any other well-reasoned answer.                                                     (1)

        Aims: (Allocate 1 mark)
         To create beautiful, visually aesthetic and functional everyday objects that
           could be afforded by everyone. 
         To create simple, elegant designs without compromising on quality and
           without losing grace and beauty  which softened the interior without
           cluttering it. 
        Credit any other well-reasoned answer.                                                     (1)

        Influences: (Allocate 2 marks)
         The Modernist and Bauhaus movements with their artistic innovation as well
            as technological and social progress. 
         The evolution of modern furniture designs as art, technology and architectural
            theories combined and progressed. 
         Social democracy which developed in the 1950s caused the start of this
            movement. 
         Machinery, new technology and new materials that were available after World
            War II influenced them. 
         Sometimes the Surrealist movement inspired them. 
         Long winters with few hours of sunlight inspired Scandinavian designers to
            create bright, light and practical environments with clean lines. 
        Credit any other well-reasoned answer.                                                     (2)

        Characteristics: (Allocate 5 marks)
         Colour: light coloured wood; designs printed in exciting, bright and cheerful
           colours. 
         Pattern: simple and artistic printed designs, using a lot of stylised florals, dots
           and stripes. 
         Form/shape: soft rounded edges;  simple often organic shapes; 
           biomorphic forms combined with harder-edged geometric forms,  furniture
           simple in shape with clean lines and smooth textures.  They paid attention
           to good craftsmanship and comfort. 
         Line: furniture had clean smooth lines with organic as well as straight lines; 
           fashion saw simple A-line skirts and dresses 
         New materials: fibreglass, wood, rubber, plastic, vinyl and plywood.  Form-
           pressed wood, anodised or enamelled aluminium or pressed steel. 
         They used modern materials such as plastics to create simple stack chairs. 
         Attention to detail and finish is emphasised. 
        Credit any other well-reasoned answer.                                                     (5)

Copyright reserved                                                                Please turn over

Text truncated here. Open the document page to read the rest.

## Related documents

- [GR12 DSGN P1 Sept2017 Memo Afr](https://www.hlayiso.com/library/gr12-dsgn-p1-sept2017-memo-afr/2c14c984-8ef9-457b-8caf-59b012f54122) — Design · Memo · 2017 · Afr
- [GR12 DSGN P1 Sept2017 QP Eng](https://www.hlayiso.com/library/gr12-dsgn-p1-sept2017-qp-eng/678aa902-4c78-4a74-8d7b-119346299a3f) — Design · QP · 2017 · Eng
- [GR12 DSGN P1 Sept2017 QP Afr](https://www.hlayiso.com/library/gr12-dsgn-p1-sept2017-qp-afr/53428d6a-2b62-417c-8590-194192625d59) — Design · QP · 2017 · Afr
- [Design P1 Nov 2017 Memo Eng](https://www.hlayiso.com/library/design-p1-nov-2017-memo-eng/f5d8441f-5f2c-49d8-ab92-8da621e89e48) — Design · Memo · 2017 · Eng
- [Design P1 Nov 2017 Memo Afr](https://www.hlayiso.com/library/design-p1-nov-2017-memo-afr/05878128-7eb2-4f90-8a89-c8a7327dbca5) — Design · Memo · 2017 · Afr
- [Design P1 Feb March 2017 Memo Afr](https://www.hlayiso.com/library/design-p1-feb-march-2017-memo-afr/eed60c80-2c53-49e5-b630-510f9c8460a0) — Design · Memo · 2017 · Afr

## More from Grade 12 Design

- [Gr 12 Des ATP 2023-24](https://www.hlayiso.com/library/gr-12-des-atp-2023-24/0fd522c6-2d5a-4c5b-9e0b-06e7b199eb25) — ATP
- [Design P1 May-June 2025 Afr](https://www.hlayiso.com/library/design-p1-may-june-2025-afr/e35d300a-db4f-4a06-ba8a-6f659dbd37ad) — QP · 2025 · Afr
- [Design P1 Nov 2025 Eng](https://www.hlayiso.com/library/grade-12-design-2025-nsc-november-exam-question-paper-paper-1/3f14a710-b913-44a8-ade1-31e4d395f557) — QP · 2025 · Eng
- [Design P1 Nov 2025 Afr](https://www.hlayiso.com/library/grade-12-design-2025-nsc-november-exam-question-paper-paper-1/47ba80e3-12dd-4fd4-8302-34e3b97a6b9a) — QP · 2025 · Afr
- [Design P1 Nov 2024 Eng](https://www.hlayiso.com/library/design-p1-nov-2024-eng/3f0bd4c5-8226-45ef-87fa-5c9996cba696) — QP · 2024 · Eng
- [Design P1 Nov 2024 Afr](https://www.hlayiso.com/library/design-p1-nov-2024-afr/6958913b-f502-40d3-8387-1f0a78a3ed25) — QP · 2024 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
