# Mechanical Technology Grade 12 Eastern Cape Mock 2016 Memo

> Grade 12 Mechanical Technology memorandum from the Eastern Cape Mock Exam 2016 (English), 10 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/gr12-mcht-s16-memo-eng/153275b7-9d23-4a2c-bc3e-dadda11f387f
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2016
- Exam period: Eastern Cape Mock Exam
- Curriculum: CAPS
- Pages: 10

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 Eastern Cape Mock 2016 Memo](https://www.hlayiso.com/library/gr12-mcht-s16-memo-eng/153275b7-9d23-4a2c-bc3e-dadda11f387f)

## About this document

Mechanical Technology · Grade 12 · Eastern Cape Mock Exam · 2016. Memorandum, 10 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

NATIONAL
                   SENIOR CERTIFICATE

                          GRADE 12

                   SEPTEMBER 2016

               MECHANICAL TECHNOLOGY
                   MEMORANDUM

MARKS:   200

                 This memorandum consists of 10 pages.

### Page 2

2                                 MECHANICAL TECHNOLOGY                    (EC/SEPTEMBER 2016)

QUESTION 1: MULTIPLE-CHOICE QUESTIONS

1.1      D           Make certain the dipstick is in the hole.                                (1)
1.2      D           All the abovementioned.                                                  (1)
1.3      B           Guards should be removed when cutting metals.                            (1)
1.4      C           Multimeter                                                               (1)
1.5      C           deflection                                                               (1)
1.6      C           iron carbide                                                             (1)
1.7      B           480 °C - 520 °C                                                          (1)
1.8      D           25 mm                                                                    (1)
1.9      B           Cylinder head                                                            (1)
1.10     A           To determine the percentage of elongation of the weld metal.             (1)
1.11     B           To check for size of the weld                                            (1)
1.12     D           Resultant                                                                (1)
1.13     A           25 MPa                                                                   (1)
1.14     B           It must increase the engine speed.                                       (1)
1.15     B           ‘Winter grades’                                                          (1)
1.16     C             16 : 1                                                                 (1)
1.17     C           Block and tackle                                                         (1)
1.18     D           ABS braking system                                                       (1)
1.19     C           mechanical drive.                                                        (1)
1.20     C           Kaplan                                                                   (1)
                                                                                             [20]
QUESTION 2: SAFETY

2.1          Make sure all the guards are in place.
             Do not use or come close to its moving parts while wearing loose
             clothing.
             Keep any cleaning material such as waste and rags away from rotating
             parts.
             Check that there are no oil or grease on the floor around the machine.
             Do not leave spanners or keys on rotary parts.                (Any 2 x 1)         (2)

2.2          The welding operator should know how to operate the oxy-acetylene
             welding plant safely.
             The work place should be partitioned off effectively.
             The operator should wear protective equipment.
             Never use damaged equipment.
             Never use oil or grease near oxygen equipment.           (Any 2 x 1)              (2)

2.3          Ensure that the beam is clamped parallel to the back board.
             Do not leave plastic beams loaded for any length of time.
             Gently drop the weights onto the hanger.                                          (3)

2.4          The operator should be instructed to use the machine safely.
             The work place should be effectively partitioned off.
             An operator uses protective equipment while using the equipment.
             The operator should ensure that the insulation of electric leads are
             satisfactory.                                                 (Any 3 x 1)        (3)
                                                                                             [10]

Copyright reserved                                                                  Please turn over

### Page 3

(EC/SEPTEMBER 2016)               MECHANICAL TECHNOLOGY                                          3

QUESTION 3: TOOLS AND EQUIPMENT

3.1            It involves the indenting of the test material with a diamond cone or
               hardened steel-ball indenter.
               The indenter is forced into the test material under a preliminary minor
               load (FO), usually 10 kgf.
               The permanent increase in depth of penetration, resulting from the
               application and removal of the additional major load, is used to
               calculate the Rockwell Hardness Number.                                          (4)

3.2            To test the system for leaks.
               To pump compressed air into the cooling system of a motor car to
               determine whether there are any leaks in the system.
               To test if the pressure cap on the cooling system operates according
               to the prescribed pressure of the system.                  (Any 2 x 1)           (2)

3.3      3.3.1         To determine the fuel operating pressure in the system.
                       To test the pressure of the fuel in the fuel line that runs to the
                       direct injection system.                                                 (2)

         3.3.2         To test different electrical components and concepts.
                       To test current, voltage, resistance, continuity, transistors and
                       diodes.                                                                  (2)

3.4      1 mm + 0,5 mm + 0,25 mm = 1,75 mm                                                      (2)
                                                                                               [12]

QUESTION 4: MATERIALS

4.1    4.1.1     Pearlite is a type of crystal formed before hardening when the steel
                 contains 0,83% carbon.                                                         (2)

       4.1.2     Carbon Content is the mixture that is added to steel to change the
                 property of the metal.                                                         (2)

       4.1.3     Martensite is the structure obtained when austenite is quenched
                 suddenly.                                                                      (2)

4.2         Alloying
            Heat treatment                                                                      (2)

4.3    To increase service life of a product      or to prepare the material for
       improved manufacturability.                                                              (2)

4.4    A map of the temperature at which different phase changes occur             on very
       slow heating and cooling in relation to carbon.                                          (2)

4.5    Iron carbide (which is a component of Iron carbon (Fe2C) found in steel and
       cast iron.                                                                               (1)
                                                                                               [13]

Copyright reserved                                                                     Please turn over

### Page 4

4                                 MECHANICAL TECHNOLOGY                                 (EC/SEPTEMBER 2016)

QUESTION 5: TERMINOLOGY

5.1
                                                                       side and face cutter

                                                                        arbor with spacers/collars

                                                                         ruler

                                                                          keyway
                                                           workpiece

                              square

                                   milling machine table                                                 (6)

5.2    5.2.1      Conventional milling also regarded as up-cut milling is the process
                  whereby the cutter turns against the direction of feed as the work
                  piece moves toward it from the side where the teeth are moving
                  upwards.                                                                               (2)

       5.2.2      Climb milling also regarded as down-cut milling is the process
                  where all looseness in the table-feed screw must be eliminated,
                  where the motion of the cutter tends to pull the work piece into the
                  cutter.                                                                                (2)

5.3    Indexing required:
       Number of turns =        =
       There will be no turns but 40 holes in a 43 hole plate.                                           (4)

5.4    Class 1:       for screw thread work in which shake or play is not
                      objectionable
       Class 2:       for threaded parts that can be put together with the
                      fingers(hand tight)
       Class 3:       for higher grade of threaded parts, requiring greater accuracy
       Class 4:       for the finest threaded work                                                       (8)

5.5    Identify: Milling process
       Name: Gear cutting                                                                                (2)

5.6    A       Anvil
       B       Screw thread
       C       Barrel
       D       Thimble
       E       Spindle
       F       Frame                                                                                      (6)
                                                                                                         [30]

Copyright reserved                                                                            Please turn over

### Page 5

(EC/SEPTEMBER 2016)             MECHANICAL TECHNOLOGY                                    5

QUESTION 6: JOINING METHODS

                 DEFECT           PREVENTION
6.1    6.1.1     Porosity            Do not use dirty or wet electrodes
                                     Do not use rusted MIG wire
                                     Ensure the weld surface is not contaminated
                                                                         (Any 1 x 2)      (2)
       6.1.2     Incomplete          Incorrect welding current
                 penetration         Travel speed to slow
                                     Incorrect torch, gun or stick angle (Any 1 x 2)      (2)
       6.1.3     Slag                Chip the slag off thoroughly from the previous
                 inclusion           weld runs and brush the weld bead with a wire
                                     brush, before doing any further welding
                                     Incorrect current setting           (Any 1 x 2)      (2)

6.2         Nick-break test
            Nick-bend test
            Machinability test                                                            (3)

6.3         Continuous wire reel
            Wire feed unit
            Power cable
            Gun conduit
            Welding gun
            Shielding gas cylinder
            Regulator
            Flow meter
            Gas hose                                                    (Any 6 x 1)       (6)

6.4         Use a hacksaw and cut both edges through the centre of the weld
            approximately 6,5 mm deep.
            Place the saw-nicked specimen on two steel supports and use a
            sledge hammer to break the specimen by striking it in the zone where
            you made the saw cuts.
            The weld metal exposed in the break should be completely fused, free
            from slag inclusion and contain no gas pockets greater than 1,6 mm.
            There should not be more than one pore or gas pocket per square
            centimetre visible.                                                           (6)

6.5    A       Motor
       B       Tension roller
       C       Consumable wire reel
       D       Wire liner                                                                 (4)
                                                                                         [25]

Copyright reserved                                                             Please turn over

### Page 6

6                                   MECHANICAL TECHNOLOGY              (EC/SEPTEMBER 2016)

QUESTION 7: FORCES

7.1    7.1.1    Diameter :
                Stress =
                8 x 106 =
                Area =
                             =

                     D       =   √
                     D       = √
                     D       = 0,079788 m or 79,79 mm                                    (6)

       7.1.2    Young’s Modulus =
                                 Strain =
                                 Strain =
                                 Strain = 0,0001333   or 1,333 x 10-4                    (3)

       7.1.3    Change in Length:
                        Strain =
                Change in Length = Strain x Original Length
                                 = 0,0001333 x 275
                                 = 0,0366575 mm                                          (3)

7.2    7.2.1             =
                           = 0,00090792 m2
                         P =
                         P=
                         P = 352453,8532 kN                                              (3)

       7.2.2    Diameter of the Ram:
                   =
                     =
                     = 0,09930378

                BUT: Area =
                         =

                D        =√
                    =√
                    = 0,3555805 m
                Diameter of Ram = 35,5 mm                                                (4)

Copyright reserved                                                          Please turn over

### Page 7

(EC/SEPTEMBER 2016)            MECHANICAL TECHNOLOGY                                          7

7.3    L :(R x 8 = (8 x 2) + (50 x 4) + (30 x 10)
                  = 16 + 200 + 300
                R=
                R = 64,5 N

         R : (L x 8) + (30 x 2) = (50 x 4 ) + (8 x 6)
             (L x 8) +    60 = 200 + 48
                            RL =
                            RL = 23,5 N
       To check if the beam is in equilibrium:
       Downward forces = Up ward forces
        8 + 50 N + 30 N = 64,5 N + 23,5 N
                    88 N = 88 N                                                               (6)

7.4    Solution:
       The horizontal component of the resultant is:
       H = 15 Cos 30° + 20 Cos 60° – 10 Cos 10°
       AND
       The vertical components is:                                        15 N
       V = 15 Sin 30° – 20 Sin 60° – 10 Sin 10°
       H = 12,99 + 10 – 9,85                      0°
         = 13,14 N
       V = 7,5 – 17,32 – 1,74      10 Cos 10°               30°      15 Cos 30°
         = - 11,56 N
                                                            60°       20 Cos 60°
                                         10 Sin 10°
                        10 N

       To Calculate the Resultant:                                    20 N
              =    +
                = √        +
                = 17,499 N
        Tan =
                 =
               = 41,34°
       The Resultant is therefore 17,499 N at 131,34°                                          (5)
                                                                                              [30]
QUESTION 8: MAINTENANCE

8.1    A       Gear lever
       B       Selector for gear changes
       C       Splined input shaft
       D       Lay shaft                                                                      (4)

8.2    Because it gives of vapours which ignite       and therefore a high flashpoint is
       required.                                                                              (2)

8.3    It is used in the turning process on a lathe     as illustrated by the drawing,
       cutting a thread on a shaft.                                                           (3)

Copyright reserved                                                                  Please turn over

### Page 8

8                                     MECHANICAL TECHNOLOGY      (EC/SEPTEMBER 2016)

8.4    A       Flywheel
       B       Diaphragm
       C       Crankshaft
       D       Clutch plate
       E       Throw-out release lever
       F       Pressure plate                                                      (6)
                                                                                  [15]
QUESTION 9: SYSTEMS AND CONTROL

9.1    9.1.1         Rotational Frequency of the output shaft:
                     Output shaft    = x x
                                        = x x 1330
                                        = 591,11 r/min                             (3)

       9.1.2         Velocity Ratio:
                     VR =
                         =
                     Velocity Ratio = 2,25 revs/min                                (2)

9.2    9.2.1         Fluid Pressure:
                        =
                           =
                           = 0,00384845
                           = 3,848 x
                          =
                             =
                             = 103937,9 Pa
                             = 103,937 kPa                                         (3)

       9.2.2         Load that can be lifted:
                                 =
                            =
                            = 0,0165
                     BUT   =
                            =
                         F =    x
                           = 103937,9 x 0,0165
                           = 1716,32 N
                           = 1,716 kN                                              (2)
9.3    9.3.1         Rotational Frequency of the driven pulley.
                       x     =    x
                             =
                                 =
                                 = 3,33 r/min                                      (2)

Copyright reserved                                                    Please turn over

### Page 9

(EC/SEPTEMBER 2016)                MECHANICAL TECHNOLOGY                                9

                     OR
                                                     =
                                                     =
                     120 (Speed of driven pulley B) = 40 x 100
                            Speed of driven pulley =
                                                    = 3,33 r/min

       9.3.2         Power transmitted:
                     P =
                       =
                     Power transmitted = 14,6 watt                                      (2)

       9.3.3         Belt speed:
                     V =
                        =
                        = 0,209 m/sec                                                   (2)

9.4    New Pressure:
         =      OR              =
       300 x 0,35 =        x 0,9
         =
           = 116,66 kN/
           = 116,66 kPa                                                                 (4)

9.5    Purpose of airbags:
         It provides protection for the head and upper body of the driver and
         passengers of a motor vehicle during a collision.
         In head on collisions, drivers and passengers are thrown forward inside
         the vehicles and when the airbags is activated, it inflates instantly and
         creates a firm barrier which counters the forward motion of the driver or
         front seat passenger.
         It is designed to prevent the occupants from hitting the windscreen or
         dashboard of the vehicle.
         It is also designed to work in conjunction with seat belts.                     (5)
                                                                                        [25]

Copyright reserved                                                            Please turn over

### Page 10

10                             MECHANICAL TECHNOLOGY                     (EC/SEPTEMBER 2016)

QUESTION 10: TURBINES

10.1   A    Wicket gate
       B    Blades
       C    Water flow
       D    Rotor
       E    Stator
       F    Shaft                                                                          (6)

10.2        Reaction turbines
            Impulse turbines                                                               (2)

10.3   Air is compressed isentropically, combustion occurs at constant pressure
          and expansion over the turbine occurs isentropically back to the starting
       pressure.                                                                           (4)

10.4        Advantages of steam turbines:
            It has greater thermal efficiency and higher power-to-weight ratio.
            It is suited to drive an electrical generator.
            It does not require a linkage mechanism to convert reciprocating motion
            to rotary motion.
            It uses multiple stages in the expansion of the steam, which results in
            greater efficiency.
            It is compact.
            No lubrication is required.
            Can be more accurately regulated.
            A variety of fuels can be used to obtain steam.
            It converts heat energy into mechanical energy               (Any 4 x 1)       (4)

10.5   Advantages of gas turbines:
          It has smooth vibration
          It is easy to start
          It has no rubbing parts such as pistons
          No internal friction and wear
          Higher power output from a given weight of engine
          Can use a wide range of fuels
          No water cooling system needed
          Require little routine maintenance
          Very little trouble with pollution                            (Any 4 x 1)        (4)
                                                                                          [20]

                                                                             TOTAL:       200

Copyright reserved                                                            Please turn over

## Related documents

- [Gr12 MCHT S16 QP Afr](https://www.hlayiso.com/library/gr12-mcht-s16-qp-afr/9c20cbdb-35c9-416e-9d01-387a3ba92333) — Mechanical Technology · QP · 2016 · Afr
- [Mechanical Technology Nov 2016 Memo Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2016-memo-eng/5e2bea9e-f108-440c-a98e-4984091bb5af) — Mechanical Technology · Memo · 2016 · Eng
- [MT Feb March 2016 Memo Eng](https://www.hlayiso.com/library/mt-feb-march-2016-memo-eng/c09d2c1d-09b6-44aa-bb15-2453e8b68b76) — Mechanical Technology · Memo · 2016 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Mechanical Technology · Memo · 2023 · Afr
- [MECH TECH GR12 MEMO SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1) — Mechanical Technology · Memo · 2023 · Eng
- [MECHANICAL TECH (Auto) GR12 MEMO SEPT2023 English](https://www.hlayiso.com/library/mechanical-tech-auto-gr12-memo-sept2023-english/dfc975c1-e179-4741-8d4f-e3b20c744c7e) — Mechanical Technology · Memo · 2023 · Eng

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Welding and Metalwork) MG Afr](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-memorandum-afrikaans/552ebeca-d294-4c37-b3fb-cded79fa438f) — Memo · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [MEC TECH GR12 MEMO SEPT2023 Fitting English](https://www.hlayiso.com/library/mec-tech-gr12-memo-sept2023-fitting-english/48945e78-f50a-4241-bab7-b94b61c60f49) — Memo · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
