# Agricultural Technology Grade 12 NSC June 2024 Memo (Eng)

> Grade 12 Agricultural Technology memorandum from the NSC June Exam 2024 (English), 17 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-memorandum-english/57faf85a-afb6-414c-bf66-0e0ede28ff4b
- Updated: 2026-09-28
- Subject: Agricultural Technology
- Grade: Grade 12
- Language: English
- Document type: Memorandum
- Year: 2024
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 17

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC June 2024 Memo (Eng)](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-memorandum-english/57faf85a-afb6-414c-bf66-0e0ede28ff4b)

## About this document

Agricultural Technology · Grade 12 · NSC June Exam · 2024 · English. Memorandum, 17 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

SENIOR CERTIFICATE EXAMINATIONS/
         NATIONAL SENIOR CERTIFICATE EXAMINATIONS

                       AGRICULTURAL TECHNOLOGY

                                  MAY/JUNE 2024

                             MARKING GUIDELINES

                                                                     MARKS: 200

                     These marking guidelines consist of 17 pages.

.

Copyright reserved                                                   Please turn over

### Page 2

Agricultural Technology                            2                     DBE/May/June 2024
                                       SC/NSC – Marking Guidelines

SECTION A

QUESTION 1

1.1       1.1.1           D✓✓

          1.1.2           A✓✓

          1.1.3           D✓✓

          1.1.4           C✓✓

          1.1.5           C✓✓

          1.1.6           C✓✓

          1.1.7           C✓✓

          1.1.8           A✓✓

          1.1.9           C✓✓

          1.1.10          A✓✓                                                                  (20)

1.2       1.2.1           Tin. ✓✓

          1.2.2           water. ✓✓

          1.2.3           flame. ✓✓

          1.2.4           Teflon. ✓✓

          1.2.5           Nickel. ✓✓                                                           (10)

1.3       1.3.1           G✓✓

          1.3.2           D✓✓

          1.3.3           B✓✓

          1.3.4           E✓✓

          1.3.5           C✓✓                                                                  (10)

                                                                     TOTAL SECTION A:          40

Copyright reserved                                                          Please turn over

### Page 3

Agricultural Technology                            3                            DBE/May/June 2024
                                       SC/NSC – Marking Guidelines

SECTION B

QUESTION 2: MATERIALS AND STRUCTURES

2.1       2.1.1           Why chromium is a suitable alloy for the manufacturing of milk
                          tanks.

                          •   Increases resistance against corrosion. ✓
                          •   Promotes the hardening of steel.✓
                          •   Improves strength.✓
                          •   Improves resistance to the formation of scale.✓
                          •   Improves tensile strength.✓
                          •   Most chromium steels can be welded well.✓               (Any 3)       (3)

          2.1.2           An alloy element, other than chromium, that can be added to
                          stainless steel to ensure resistance to air, water and many acids
                          and alkali.

                          Nickel.✓                                                                  (1)

2.2       2.2.1           A reason why copper is not a suitable material for the
                          manufacturing of pipefittings.

                          Copper is too soft/Copper is likely to bend.✓                             (1)

          2.2.2           The name of the alloy element that is used with copper to form
                          durable brass pipefittings.

                          Zinc.✓                                                                    (1)

          2.2.3           THREE properties of brass.

                          •   Strength✓
                          •   Ductility✓
                          •   Wear resistance✓
                          •   Hardness✓
                          •   Conductivity✓
                          •   Corrosion resistance✓
                          •   Antimicrobial✓                                       (Any 3)
                                                                                                    (3)

Copyright reserved                                                                    Please turn over

### Page 4

Agricultural Technology                           4                              DBE/May/June 2024
                                      SC/NSC – Marking Guidelines

2.3       THREE common uses of tin.

          •    Tin is used as a coating on the surface of other metals to prevent
               corrosion.✓
          •    ‘Tin’ cans.✓
          •    Alloys of tin: Soft solder, pewter, bronze and phosphor bronze.✓
          •    Tin chloride is used as a penetrant in dyeing textiles and for increasing
               the weight of silk.✓
          •    Stannous fluoride is used in some toothpastes.✓
          •    Tin foil.✓                                                        (Any 3)              (3)

2.4       2.4.1           TWO important aspects that must be considered when choosing a
                          specific adhesive for a repairing task.

                          •   Type of material to be joined.✓
                          •   Conditions under which this joint will be used.✓                        (2)

          2.4.2           Discussion of heat resistance as a property of an adhesive.

                          The adhesive itself should not distort✓, melt✓ or burn✓ when
                          heated.✓                                               (Any 2)              (2)

          2.4.3           Explanation of the difference between duration of usability and
                          duration of cohesion in adhesives.

                          Duration of usability:
                          Period of time during which the mixed adhesive remains usable
                          before setting.✓

                          Duration of cohesion:
                          The period of time that an adhesive will stick after having been
                          applied.✓                                                                   (2)

2.5       2.5.1           FOUR characteristics of fibre glass which makes it a suitable
                          material for the manufacturing of small boats.

                          •   Lightness.✓
                          •   Watertight.✓
                          •   Can be casted into any shape.✓
                          •   Easy to colour.✓
                          •   Colour fast.✓
                          •   Can be sawn, drilled, and filled.✓
                          •   Toughness.✓
                          •   Easy repaired when break.✓                               (Any 4)        (4)

Copyright reserved                                                                      Please turn over

### Page 5

Agricultural Technology                             5                           DBE/May/June 2024
                                        SC/NSC – Marking Guidelines

          2.5.2           FOUR precautionary measures that must be taken by the person
                          working with fibreglass.

                          •   Catalyst and accelerator should always be stored
                              separately.✓
                          •   Remove all resin catalyst and accelerator from skin.✓
                          •   Wear gloves if skin is sensitive.✓
                          •   Use acetone in well-ventilated room.✓
                          •   Handle resin casting carefully, they are brittle.✓
                          •   Fibreglass matting has small pieces of fibre that can penetrate
                              the skin.✓
                          •   Do not breathe in glass fibre or get it in your eyes.✓ (Any 4)          (4)

2.6       A few types of material used on farms.

          2.6.1           Vesconite✓                                                                  (1)

          2.6.2           Magazines for guns✓, Teflon tape✓, Teflon coated cooking
                          pans✓, Teflon tape for sealing fittings✓, Car wash products✓,
                          O-rings✓, Oil and water seals✓, Teflon Taps✓, fittings✓, non-
                          return valves✓ and Flanges✓, Pipe saddles.✓           (Any 2)               (2)

          2.6.3           Bronze is an alloy consisting primarily of copper, usually with tin✓
                          as the main additive. It is hard and tough.✓                                (2)

2.7       2.7.1           Name of part A.

                          Earth spike.✓                                                               (1)

          2.7.2           Identification of the device shown in the illustration that produces
                          the electricity for the electric fence.

                          Energiser.✓                                                                 (1)

          2.7.3           Function of part B.

                          Insulators are used to fasten electrified wire to fence posts without
                          losing energy through the posts.✓                                           (1)

          2.7.4           The material from which part B is manufactured.

                          Ceramic,✓Plastic,✓PVC.✓                                       (Any 1)       (1)
                                                                                                      [35]

Copyright reserved                                                                      Please turn over

### Page 6

Agricultural Technology                            6                             DBE/May/June 2024
                                       SC/NSC – Marking Guidelines

QUESTION 3: ENERGY

3.1       3.1.1           TWO instances where a small wind turbine can be useful on a
                          farm.

                          •   Electrical water pump.✓
                          •   Small home/caravan/ boat.✓
                          •   Auxiliary power for security gate/CCTV/Lights.✓
                          •   To charge batteries.✓                                    (Any 2)        (2)

          3.1.2           TWO disadvantages of wind turbines.

                          •   Insufficient wind in the area.✓
                          •   Effectiveness of wind turbines.✓
                          •   Noise pollution.✓
                          •   Competition with other alternative energy sources.✓
                          •   High initial cost.✓                                       (Any 2)       (2)

          3.1.3           The importance of a large wing area in relation to the generation of
                          electrical energy.

                          The larger the wing area of the blades,✓the more wind energy is
                          harnessed to rotate the turbine.✓                                           (2)

          3.1.4           The device installed in the head of the wind turbine to decrease
                          torque and increase input shaft speed to the generator.

                          Gearbox.✓                                                                   (1)

3.2       3.2.1           Identification of the type of alternative energy system.

                          Photovoltaic/Solar energy✓                                                  (1)

          3.2.2           A suitable material for the coating on the panels and ONE property
                          of this coating.

                          Material: Shatterproof glass/Teflon/Silicon /Ceramic.✓
                          Property: Self-cleaning/ Lightweight/ Non-pollutant/ Anti-reflective/
                          improved efficiency.✓                                                       (2)

          3.2.3           A component that can be installed in the system to prevent
                          overcharging of the batteries.

                          Regulator/Charge controller.✓                                               (1)

Copyright reserved                                                                      Please turn over

### Page 7

Agricultural Technology                       7                           DBE/May/June 2024
                                  SC/NSC – Marking Guidelines

3.3       Correct sequence of the geothermal power station.

                 STEPS                    GENERATION SEQUENCE
                   1              Cold water is pumped into the borehole.✓
                   2            Underground heat source heats up the water.✓
                   3          Steam is transferred to a turbine & generator unit.✓
                   4        Generated electrical energy is sent to the national grid.✓
                   5         A condenser cools the steam and water is formed.✓                  (5)

3.4       Description of the term “biofuel” and one example of such a fuel.

          Biofuel or bioorganic fuel is any plant or animal matter ✓that can be                 (3)
          combusted and used as a fuel. ✓

          Methane gas, ✓ Methanol, ✓ Ethanol ✓                                    (Any 1)       (1)
                                                                                                [20]

Copyright reserved                                                                Please turn over

### Page 8

Agricultural Technology                            8                          DBE/May/June 2024
                                       SC/NSC – Marking Guidelines

QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

4.1       4.1.1           Identification the part on the MIG welding aparatus that are used by
                          the welding operator to activate the electrical charge to the
                          workpiece.

                          Trigger/switch on the MIG welding gun.✓                                  (1)

          4.1.2           Description of the MIG welding process.

                          •   The MIG welding machine sends a current through the
                              continuously fed positive wire to the welding area when the
                              operator presses the trigger on the welding torch.✓
                          •   The electric arc creates a short circuit between the wire and
                              work-piece.✓
                          •   The heat produced by the short circuit, melts the metal and
                              allows them to mix.✓
                          •   An inert shielding gas protects the welding area from oxygen
                              contamination.✓
                          •   Once the heat is removed, the metal begins to cool and
                              solidify, and forms a piece of fused metal.✓                         (5)

          4.1.3           The composition of the MIG welding shielding gas.

                          Argon,✓Helium,✓ CO2✓                                                     (3)

          4.1.4           FOUR problems that will prevent the welding wire not to feed
                          through the torch gun when welding.

                          •   Blocked/defective contact tip.✓
                          •   Loose/broken wire drive/rollers.✓
                          •   Entangled wire in delivery pipe.✓
                          •   Broken torch trigger switch.✓
                          •   Rusted wire jammed on spool.✓
                          •   Wrong size of wire/rollers.✓
                          •   Damaged/blocked/coiled torch liner.✓                    (Any 4)      (4)

          4.1.5           Identification of the welding defect.

                          Defect: Undercutting.✓
                          Causes: Speed too fast,✓current too high,✓ poor technique.✓
                                                                                   (Any 3)         (3)

Copyright reserved                                                                   Please turn over

### Page 9

Agricultural Technology                        9                               DBE/May/June 2024
                                   SC/NSC – Marking Guidelines

4.2       Description of the procedure that must be followed in preparing galvanized
          metal for the welding process.

          •    This galvanized coating makes it difficult to be welded and must be
               removed prior to welding.✓
          •    Wear a gas mask to protect the welding operator against poisonous gas
               fumes.✓                                                                             (2)

4.3       Labelled drawing of a horizontal square butt weld.

          Marks will be allocated for the following:

                               Design                            1
                          Angle of electrode                     1
                          Direction of travel                    1
                              Neatness                           1
                              Labelling                          1

                                                         Work piece

                                                         Direction of travel

                                                   Welding electrode

                                                                                                   (5)

4.4       THREE pipe welding positions.

          •    Horizontal fixed position.✓
          •    Horizontal movable position.✓
          •    Vertical position.✓                                                                 (3)

Copyright reserved                                                                   Please turn over

### Page 10

Agricultural Technology                           10                           DBE/May/June 2024
                                       SC/NSC – Marking Guidelines

4.5        4.5.1          Metals that should not be cut with the apparatus with a motivation.

                          •   Aluminium, copper.✓ Their high thermal conductivity causes
                              them to melt away too quick, leaving a very porous cut.✓

                                                           OR

                          •   Stainless steel.✓– The presence of nickel and molybdenum
                              makes it difficult because it creates an oxide film on the base
                              metal.✓                                                               (2)

           4.5.2          When the torch is moved too fast when cutting a thick metal plate.

                          •   The molten puddle will stick to one another.✓
                          •   The flame will not penetrate the plate.✓
                          •   The cut will form slag.✓                                              (3)

           4.6.1          The material that is used for manufacturing the plasma cutter
                          combustion cap.

                          •   Porcelain✓
                          •   Ceramic✓                                                (Any 1)       (1)

           4.6.2          THREE properties of the Porcelain/Ceramic.

                          Heat resistant.✓
                          Durable.✓
                          Does not conduct electricity.✓                                            (3)
                                                                                                    [35]

Copyright reserved                                                                    Please turn over

### Page 11

Agricultural Technology                           11                          DBE/May/June 2024
                                       SC/NSC – Marking Guidelines

QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT

5.1       5.1.1           Identification of the power source of each of the mowers.

                          •   A- Electric.✓
                          •   B- Petrol.✓                                                           (2)

          5.1.2           TWO maintenance tasks to be performed on mower B.

                          •   Safety screens/equipment should be inspected and in place.✓
                          •   Check oil and fuel level.✓
                          •   Replace broken/worn parts.✓
                          •   Service according to manufactures specification.✓
                          •   Clean the mower after each use.✓                     (Any 2)          (2)

          5.1.3           TWO safety tips when working with lawn mowers.

                          •   Read and understand the operator’s manual and
                              become familiar with the machine.✓
                          •   Remove all debris from lawns before mowing.✓
                          •   Use recommended PPE including close-fitting clothing
                              when operating a lawn mower.✓
                          •   Disengage the blade before starting.✓
                          •   Keep all guards and safety shields in place.✓
                          •   Never disengage any safety interlock switches.✓
                          •   Never refuel the mower when the engine is hot or running.✓
                          •   Store gasoline in an approved container with proper label.✓
                          •   Turn off the motor before cleaning the area under the deck.✓
                          •   Disconnect the spark or electric plug before trouble-
                              shooting or repairing the mower.✓
                          •   Perform routine maintenance according to the schedule
                              recommended by the manufacturer.✓
                          •   Keep a running mower away from bystanders and pets.✓
                                                                                      (Any 2)       (2)

Copyright reserved                                                                    Please turn over

### Page 12

Agricultural Technology                           12                          DBE/May/June 2024
                                       SC/NSC – Marking Guidelines

5.2       5.2.1           Identification of the safety hazards.

                          A   No safety screen in place.✓
                          B   Damaged safety screen.✓
                          C   Worker climbing over PTO-driving shaft/Bystanders that can be
                              injured.✓
                          D   Hands near moving parts/No safety screens.✓                          (4)

          5.2.2           When setting up a hammer mill, it needs to be on a level surface.
                          Motivation for the statement.

                          Yes✓
                          • Ensures the mass of moving parts are spread equally over
                             bearings. ✓
                          • Cyclone hang level on the blower pipe. ✓
                          • Looks neat. ✓
                          • Minimize vibration. ✓                           (Any 2 + 1)            (3)

          5.2.3           A PTO-driving shaft can reach a rotational speed of up to 2800
                          r/min (revolutions per minute). Calculation on revolutions per
                          second.

                          2800 r/min ÷ 60 minutes✓ = 46.66✓ r/sec✓ (revolutions per                (3)
                          second).

5.3       Matching of the correct use of parts.

          5.3.1           D.✓
          5.3.2           E.✓
          5.3.3           B.✓
          5.3.4           C.✓
          5.3.5           A.✓                                                                      (5)

Copyright reserved                                                                   Please turn over

### Page 13

Agricultural Technology                            13                              DBE/May/June 2024
                                        SC/NSC – Marking Guidelines

5.4       5.4.1           A table with TWO advantages and TWO disadvantages of each
                          type of baler.

                              BALE          ADVANTAGES:              DISADVANTAGES:
                              TYPE:
                              Round         • Roofed storage not     • Not easily transported.✓
                              bales           necessary.✓            • Must be handled
                                            • One-man                  mechanically.✓
                                              operation.✓            • No automatic packing
                                            • Packing of bales         machines.✓
                                              less time              • Relatively vast storage
                                              consuming.✓              area. ✓
                                                         (Any 2)     • Easily roll down steep
                                                                       hills.✓           (Any 2)

                              Rectangular   • Bales stored           • Must be stored under
                              bales           easily.✓                 roof.✓
                                            • Easier to pack on      • Higher labour needs.✓
                                              the trailer.✓          • Time consuming during
                                            • Storage space            stacking of bales.✓
                                              optimally utilized.✓                      (Any 2)
                                            • Easily handled by
                                              hand.✓       (Any 2)                                     (8)

          5.4.2           TWO methods that can be used to load large bales onto a trailer.

                          •     Front end bale loader/Fork loader.✓
                          •     Mechanical devices/Conveyer belt.✓
                          •     Loader on the three point mechanism.✓                                  (2)

          5.4.3           TWO safety measures need to be followed when bales are
                          transported to the shed.

                          •     Only one person on the tractor. ✓
                          •     No one allowed to sit on bales during transport. ✓
                          •     Do not over speed. ✓
                          •     Use a lower gear when going downhill, since the tractor brakes
                                alone may not be able to stop the load. ✓
                          •     When going uphill, also use a low gear, so that you will not
                                have to hold the load with the tractor brakes while changing
                                gears up the slope. ✓
                          •     Do not attempt to change gears during descend, begin
                                descend in a low gear. ✓
                          •     Never operate a hay trailer on the highway that is not equipped
                                with brakes. ✓
                          •     Hand signals should be used and understood by both the
                                operator and those assisting. ✓                          (Any 2)       (2)

Copyright reserved                                                                       Please turn over

### Page 14

Agricultural Technology                           14                            DBE/May/June 2024
                                       SC/NSC – Marking Guidelines

5.1       5.5.1           The part that enables the lifting arms to start moving.

                          Control lever. ✓                                                          (1)

          5.5.2           Name of the part labelled as A.

                          Automatic depth control mechanism/ sensitivity element spring. ✓          (1)

          5.5.3           Explanation of what will happen to the plough if the top-link is not
                          connected and the tractor starts moving forward.

                          The back of the plough will tend to lift up out of the soil✓ or the
                          front of the tractor will tend to lift up.✓                               (2)

5.6       Identification of the type of hydraulic cylinder used in the pictures.

          5.6.1           Single action hydraulic cylinder✓
          5.6.2           Double action hydraulic cylinder ✓
          5.6.3           Single action hydraulic cylinder ✓                                        (3)
                                                                                                    [40]

Copyright reserved                                                                    Please turn over

### Page 15

Agricultural Technology                          15                           DBE/May/June 2024
                                      SC/NSC – Marking Guidelines

QUESTION 6: WATER MANAGEMENT

6.1       6.1.1           TWO advantages of using this irrigation system.

                          •   Time saving. ✓
                          •   Can irrigate large lands. ✓
                          •   One-man operation. ✓                                     (Any 2)       (2)

          6.1.2           TWO communication devices that a farmer can use to effectively
                          control the system.

                          •   Cell phone✓
                          •   Tablet✓
                          •   Computer✓
                          •   Laptop✓                                                  (Any 2)       (2)

          6.1.3           TWO tips a farmer must consider before choosing the type of
                          fertiliser to apply through a centre pivot irrigation system.

                          •   Fertiliser with a high acid content must be avoided. ✓
                          •   Fertiliser with large particles must be avoided. ✓                     (2)

6.2       6.2.1           When a farmer would prefer pump A over pump B.

                          •   No electrical power required to operate the pump.✓
                          •   Can pump larger volumes of water.✓
                          •   It can be moved easily/mobile.✓
                          •   No electrical installation needed.✓
                          •   No shocking hazards.✓                                    (Any 3)       (3)

          6.2.2           THREE factors to consider when choosing a new pump for an
                          irrigation field.

                          •   Type of pump.✓
                          •   Estimated flow (ℓ/min).✓
                          •   Pressure requirements.✓
                          •   Research available for pump models.✓
                          •   Capacity of the pump.✓
                          •   Durability of the pump.✓
                          •   Availability of electricity.✓                            (Any 3)       (3)

Copyright reserved                                                                     Please turn over

### Page 16

Agricultural Technology                           16                             DBE/May/June 2024
                                       SC/NSC – Marking Guidelines

          6.2.3           THREE reasons why PVC pipes are preferred over steel pipes to
                          supply water to an irrigation system.

                          •   PVC does not rust.✓
                          •   PVC is lightweight.✓
                          •   PVC is flexible.✓
                          •   Easy to join.✓
                          •   Available in long lengths.✓
                          •   Easy to work with.✓
                          •   Cheaper.✓
                              (Any 3)                                                                 (3)

          6.2.4           Calculation of the time it will take to empty the water source.

                          Formula: Flow rate = Volume of water
                                                       Time

                          Time      = Volume of water✓
                                        Flow rate
                                    = 72 000 ✓
                                       120
                                    = 600 ✓ ℓ/min.✓

                                                                                                      (4)

6.3       TWO types of drainage system that can be used to remove excess water
          around the buildings of a dairy farm.

          •    Channel drain.✓
          •    Slope drain.✓
          •    Drainage ditch.✓                                                         (Any 2)       (2)

6.4       TWO different water purification methods that can be used to purify brackish
          water.

          •    Distillation.✓
          •    Reverse osmosis.✓                                                        (Any 2)       (2)

6.5       6.5.1           Explanation of the construction and working of the distribution field
                          that is connected to the septic tank.

                          •   A system that consist of a narrow trench, partially filled with a
                              bed of washed gravel or crushed stone, into which perforated
                              or open joint pipe is placed.✓
                          •   The discharge from the septic tank is distributed through these
                              pipes into the trench and surrounding soil.✓
                          •   The subsurface absorption field must be properly sized and
                              constructed.✓                                                           (3)

Copyright reserved                                                                      Please turn over

### Page 17

Agricultural Technology                          17                           DBE/May/June 2024
                                      SC/NSC – Marking Guidelines

          6.5.2           Why a distribution field should NOT be built near drinking water
                          installations or boreholes.

                          •   Septic tank water is contaminated with harmful chemicals.✓
                          •   It will contaminate the water with deadly pathogens/bacteria.✓      (2)

6.6       TWO instances where V.R.T (Variable Rate Technology) can be used in
          precision farming.

          •    Precision planting.✓
          •    Application of Fertilizers/Lime.✓
          •    Water application Irrigation systems.✓
          •    Application of Pesticides/Herbicides.✓                                (Any 2)      (2)
                                                                                                  [30]

                                                                       TOTAL SECTION B:           160
                                                                          GRAND TOTAL:            200

Copyright reserved

## Related documents

- [Agricultural Technology May-June 2024 Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-question-paper-english/85728b95-5774-4d6d-85dd-de20dc4ca39b) — Agricultural Technology · QP · 2024 · Eng
- [Agricultural Technology May-June 2025 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2025-eng/277bcb3f-14d3-4d58-9b23-d192269c80e2) — Agricultural Technology · QP · 2025 · Eng
- [Agricultural Technology May June 2022 MG Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-mg-eng/80cec2f1-af20-4a7a-bd4b-a41f7966a36e) — Agricultural Technology · Memo · 2022 · Eng
- [Agricultural Technology May June 2022 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-mg-afr/655a1b9b-18a2-4cf2-8f3a-991e76df10f1) — Agricultural Technology · Memo · 2022 · Afr
- [Agricultural Technology May June 2021 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-mg-afr/427a8975-2250-4eaa-98ec-79fd8d83222d) — Agricultural Technology · Memo · 2021 · Afr
- [Agricultural Technology May June 2021 MG Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-mg-eng/bb8abf1f-a9c0-4d72-915e-31e75ca3201d) — Agricultural Technology · Memo · 2021 · Eng

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology Nov 2025 Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/d47614f1-1c99-4acc-87f4-eefd7c63d61e) — QP · 2025 · Eng
- [Agricultural Technology Nov 2025 Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/f45f941f-dd15-410f-97ae-f0ce8a673078) — QP · 2025 · Afr
- [Agricultural Technology Nov 2024 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-afr/f4723cfb-5760-424c-a00a-2c0e3b5e5dbb) — QP · 2024 · Afr
- [Agricultural Technology Nov 2024 Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-eng/f63c1a66-fac4-4a77-acdc-6e16d5d7293f) — QP · 2024 · Eng
- [Agricultural Technology May-June 2023 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-eng/6e72892b-deb8-4820-8758-b91c5592448a) — QP · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
