# Agricultural Technology Grade 12 NSC June 2024 QP (Eng)

> Grade 12 Agricultural Technology question paper from the NSC June Exam 2024 (English), 19 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-question-paper-english/85728b95-5774-4d6d-85dd-de20dc4ca39b
- Updated: 2026-09-28
- Subject: Agricultural Technology
- Grade: Grade 12
- Language: English
- Document type: Question paper
- Year: 2024
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 19

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC June 2024 QP (Eng)](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-question-paper-english/85728b95-5774-4d6d-85dd-de20dc4ca39b)

## About this document

Agricultural Technology · Grade 12 · NSC June Exam · 2024 · English. Question paper, 19 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Confidential

             SENIOR CERTIFICATE EXAMINATIONS/
         NATIONAL SENIOR CERTIFICATE EXAMINATIONS

                     AGRICULTURAL TECHNOLOGY

                               MAY/JUNE 2024

                                                                  MARKS: 200

                                                                 TIME: 3 hours

                     This question paper consists of 19 pages.

Copyright reserved                                               Please turn over

### Page 2

Agricultural Technology                           2                          DBE/May/June 2024
                                           SC/NSC Confidential

INSTRUCTIONS AND INFORMATION

1.        GENERAL INSTRUCTIONS AND INFORMATION

          1.1             This question paper consists of TWO sections, namely SECTION A
                          and SECTION B.

          1.2             BOTH sections are COMPULSORY.

          1.3             Answer ALL the questions in the ANSWER BOOK.

          1.4             Number the answers correctly according to the numbering system
                          used in this question paper.

          1.5             You may use a non-programmable calculator.

          1.6             Show ALL calculations.

          1.7             Write neatly and legibly.

2.        SECTION A: SHORT QUESTIONS

          2.1             This section consists of THREE questions.

          2.2             Follow the instructions when answering the questions.

3.        SECTION B: STRUCTURED LONG QUESTIONS

          3.1             This section consists of FIVE questions.

          3.2             Start EACH question on a NEW page.

Copyright reserved                                                                 Please turn over

### Page 3

Agricultural Technology                          3                            DBE/May/June 2024
                                          SC/NSC Confidential

SECTION A

QUESTION 1

1.1       Various options are provided as possible answers to the following questions.
          Choose the answer and write only the letter (A–D) next to the question
          numbers (1.1.1 to 1.1.10) in the ANSWER BOOK, e.g. 1.1.11 D.

          1.1.1           The amperage of an electric fence may never be higher than
                          … amperes.

                          A   0,2
                          B   20
                          C   0,005
                          D   0,002

          1.1.2           When working with fibreglass, the hardening agent is called the …

                          A   catalyst.
                          B   resin.
                          C   glue.
                          D   epoxy.

          1.1.3           Identify ONE of the following qualities that best suits the
                          transmission oil used in a tractor's hydraulic system:

                          A   Volatile
                          B   Compressible
                          C   Expensive
                          D   Remains liquid over a large temperature range

          1.1.4           The teeth of this type of gear are angled in both directions and
                          cannot be meshed from the side:

                          A   Spur gear
                          B   Helical gear
                          C   Double helical gear
                          D   Idler gear

          1.1.5           Name ONE disadvantage of V-belts:

                          A   Easily slips off pulleys
                          B   Easily joined
                          C   Much more dangerous than flat belts
                          D   Subject to stretching

Copyright reserved                                                                  Please turn over

### Page 4

Agricultural Technology                             4                          DBE/May/June 2024
                                             SC/NSC Confidential

          1.1.6           A … indicates the gas pressure in the cylinders of an oxyacetylene
                          set.

                          A   release valve
                          B   calibrated glass tube with a metal ball inside
                          C   content gauge
                          D   flash-back indicator

          1.1.7           … is NOT one of the functions of the GPS in a modern combine
                          harvester.

                          A   Yield monitoring
                          B   Autonomous steering
                          C   Detection of mechanical problems
                          D   Determining the position of the combine harvester

          1.1.8           A photovoltaic panel utilises the … in the rays of the sun to
                          generate electrical energy.

                          A   photons
                          B   X-rays
                          C   ultraviolet rays
                          D   heat

          1.1.9           An example of fixed expenses on a tractor:

                          A   Fuel
                          B   Labour
                          C   Depreciation
                          D   Repair

          1.1.10          A solar geyser system concentrates the heat from the sun on the
                          … to heat up water.

                          A   glass tubes
                          B   lithium cells
                          C   plasma filament
                          D   photon surface                                          (10 x 2)     (20)   20242

Copyright reserved                                                                   Please turn over

### Page 5

Agricultural Technology                           5                                  DBE/May/June 2024
                                           SC/NSC Confidential

1.2       Change the underlined word(s) in the following to make the statements
          TRUE. Write only the appropriate word(s) next to the question numbers
          (1.2.1 to 1.2.5) in the ANSWER BOOK, e.g. 1.2.6 Tractor.

          1.2.1           Bronze is a metal alloy made from copper and cast iron.

          1.2.2           The tyres of a tractor can be inflated with helium to positively
                          change the mass displacement of a tractor.

          1.2.3           During overhead gas welding, the force of the arc helps to keep the
                          molten metal in position.

          1.2.4           The melting point of Vesconite is 327 °C and it is used as a coating
                          in cooking pans.

          1.2.5           Chromium is used as an alloy element in stainless steel and it
                          helps to give steel a fair amount of toughness at low temperatures.
                                                                                       (5 x 2)           (10)

1.3       Choose a word/term from COLUMN B that matches a description in
          COLUMN A. Write only the letter (A–I) next to the question numbers
          (1.3.1 to 1.3.5) in the ANSWER BOOK, e.g. 1.3.6 J.

                         COLUMN A                                     COLUMN B
          1.3.1       Capital used to pay                A       moveable capital
                      contractors for work and
                      repairs done on a farm             B       thermal imaging

          1.3.2       Type of capital used to            C       micro irrigation
                      improve kraals on a farm
                      and to sink boreholes              D       fixed capital

          1.3.3       Used to determine areas of         E       differential lock
                      undergrowth in a maize field
                                                         F       running expenses
          1.3.4       Is used to lock both wheels
                      on an axle together as on a        G       working capital
                      common axle
                                                         H       universal joint
          1.3.5       Water is delivered directly to
                      the roots of plants                I       overhead irrigation
                                                                                             (5 x 2)     (10)

                                                                            TOTAL SECTION A:             40

Copyright reserved                                                                         Please turn over

### Page 6

Agricultural Technology                          6                          DBE/May/June 2024
                                          SC/NSC Confidential

SECTION B

QUESTION 2: MATERIALS AND STRUCTURES

Start this question on a NEW page.

2.1       The picture below shows a stainless-steel milk tank used for storing fresh milk
          in the milking parlour.

          2.1.1           Explain why chromium is a suitable alloy for the manufacturing of
                          milk tanks.                                                            (3)

          2.1.2           Which alloy element, other than chromium, can be added to
                          stainless steel to ensure resistance to air, water and many acids
                          and alkali?                                                            (1)

2.2       A water pipe system must be installed in a milking parlour to ensure clean
          running water.

          2.2.1           Give a reason why copper is not a suitable material for the
                          manufacturing of pipe fittings.                                        (1)

          2.2.2           Name the alloy element that is used with copper to form durable
                          brass pipe fittings.                                                   (1)

          2.2.3           Name THREE properties of brass.                                        (3)

2.3       List THREE common uses of tin.                                                         (3)

Copyright reserved                                                                 Please turn over

### Page 7

Agricultural Technology                          7                           DBE/May/June 2024
                                          SC/NSC Confidential

2.4       The picture below shows a part that needs to be repaired with an adhesive.

          2.4.1           Name TWO important aspects that should be considered when
                          choosing a specific adhesive for a repairing task.                     (2)

          2.4.2           Discuss heat resistance as a property of an adhesive.                  (2)

          2.4.3           Explain the difference between the duration of usability and the
                          duration of cohesion of adhesives.                                     (2)

2.5       The picture below shows a fibreglass canoe.

          2.5.1           Name FOUR characteristics of fibreglass that makes it a suitable
                          material for the manufacturing of small boats.                         (4)

          2.5.2           State FOUR precautionary measures that must be taken by the
                          person working with fibreglass.                                        (4)

Copyright reserved                                                                 Please turn over

### Page 8

Agricultural Technology                           8                           DBE/May/June 2024
                                           SC/NSC Confidential

2.6       The table below shows a few types of material used on farms. Write only the
          answer next to the question numbers (2.6.1 to 2.6.3) in the ANSWER BOOK.

                  MATERIAL                    DESCRIPTION                    USES
                                                Specialised                  Bushes
                                         thermoplastic made from            Washers
                  2.6.1 … (1)
                                            internally lubricated          Wear plates
                                                  polymers                 Shackle pins
                                          A plastic with the lowest
                     Teflon                                           2.6.2 … (TWO uses) (2)
                                            coefficient of friction
                                                                             Tools
                     Bronze                     2.6.3 … (2)                 Weapons
                                                                             Bells                 (5)

2.7       The illustration below shows an electric fence that is used on a farm to
          manage grazing.

          2.7.1           Name part A.                                                             (1)

          2.7.2           Identify the device shown in the illustration that produces the
                          electricity for the electric fence.                                      (1)

          2.7.3           State the function of part B.                                            (1)

          2.7.4           Name the material from which part B is manufactured.                     (1)
                                                                                                   [35]

Copyright reserved                                                                   Please turn over

### Page 9

Agricultural Technology                           9                             DBE/May/June 2024
                                           SC/NSC Confidential

QUESTION 3: ENERGY
Start this question on a NEW page.
3.1       Alternative energy systems like the one shown below play a major role in
          supplying electricity on farms.

          3.1.1           Name TWO instances where a small wind turbine can be useful on
                          a farm.                                                                    (2)
          3.1.2           State TWO disadvantages of wind turbines.                                  (2)
          3.1.3           Describe the importance of a larger blade area of a wind turbine in
                          relation to the generation of electrical energy.                           (2)
          3.1.4           Name the device installed in the head of the wind turbine to
                          decrease torque and increase input shaft speed to the generator.           (1)
3.2       The picture below shows an alternative energy system.

          3.2.1           Identify the type of alternative energy system in the picture above.       (1)
          3.2.2           Name a suitable material for the coating on the panels and state
                          ONE property of this coating.                                              (2)
          3.2.3           Batteries can be recharged using the system above. What can be
                          installed in the system to prevent overcharging of the batteries?          (1)

Copyright reserved                                                                     Please turn over

### Page 10

Agricultural Technology                    10                            DBE/May/June 2024
                                    SC/NSC Confidential

3.3       Study the table below and rearrange the working principles of a geothermal
          power station in the correct sequence, e.g. 9, 7, 10, 8, 6.

            STEPS                       GENERATION SEQUENCE
              1              A condenser cools the steam and water is formed
              2                Underground heat source heats up the water
              3            Generated electrical energy is sent to the national grid
              4                  Cold water is pumped into the bore hole
              5             Steam is transferred to a turbine and generator unit               (5)

3.4       Describe the term biofuel and give ONE example of such a fuel.                       (4)
                                                                                               [20]

Copyright reserved                                                               Please turn over

### Page 11

Agricultural Technology                          11                            DBE/May/June 2024
                                          SC/NSC Confidential

QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

Start this question on a NEW page.

4.1       The image below shows a part of the MIG welding apparatus.

          4.1.1           Identify the part of the MIG welding aparatus that is used by the
                          welding operator to activate the electrical charge to the workpiece
                          that melts the filler wire.                                               (1)

          4.1.2           Describe the MIG welding process.                                         (5)

          4.1.3           State the composition of the MIG welding shielding gas.                   (3)

          4.1.4           Name FOUR problems that will prevent the welding wire from
                          feeding through the torch gun when welding.                               (4)

          4.1.5           Identify the welding defect indicated by A in the illustration below
                          and state TWO possible causes.

                                                                                                    (3)

4.2       Describe the procedure that must be followed when preparing galvanised
          metal for the welding process.                                                            (2)

Copyright reserved                                                                    Please turn over

### Page 12

Agricultural Technology                           12                                  DBE/May/June 2024
                                           SC/NSC Confidential

4.3       Draw a labelled sketch of a horizontal square butt weld. Indicate the angle of
          the welding electrode and the direction of travel.
          Marks will be allocated for the following:

                          Design                                       1
                          Angle of electrode                           1
                          Direction of travel                          1
                          Neatness                                     1
                          Labelling                                    1                                  (5)
4.4       The welding plane continuously changes as the welder welds a joint on a
          pipe. State THREE pipe welding positions.                                                       (3)
4.5       The image below shows a type of oxyacetylene cutting apparatus.

           4.5.1          Which metals should NOT be cut with the above apparatus?
                          Motivate the answer.                                                            (2)
           4.5.2          What happens when the torch is moved too fast when cutting a
                          thick metal plate?                                                              (3)
4.6       The picture below shows a plasma-cutting nozzle.

           4.6.1          Name the material that is used for manufacturing the plasma cutter
                          combustion cap.                                                                 (1)
           4.6.2          State THREE properties            of   the       material     named      in
                          QUESTION 4.6.1.                                                                 (3)
                                                                                                          [35]

Copyright reserved                                                                          Please turn over

### Page 13

Agricultural Technology                         13                          DBE/May/June 2024
                                         SC/NSC Confidential

QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT

Start this question on a NEW page.

5.1       The pictures below show TWO types of lawnmowers. Answer the questions
          that follow.

                                  A                                     B

          5.1.1           Identify the power sources of mower A and mower B.                    (2)

          5.1.2           State TWO maintenance tasks to be performed on mower B.               (2)

          5.1.3           State TWO safety tips when working with lawn mowers.                  (2)

Copyright reserved                                                                Please turn over

### Page 14

Agricultural Technology                            14                          DBE/May/June 2024
                                            SC/NSC Confidential

5.2       A hammer mill is used to pulverise different types of animal feed.

          5.2.1           Identify the safety hazards depicted in EACH picture below.

                                        A                                  B

                                        C                                  D

                                                                                                      (4)

          5.2.2           When setting up a hammer mill, it needs to be on a level surface.

                          Do you agree with this statement? Motivate the answer.                      (3)

          5.2.3           A PTO drive shaft can reach a rotational speed of up to 2 800 r/min
                          (revolutions per minute). Determine how many revolutions will
                          occur per second.                                                           (3)

Copyright reserved                                                                      Please turn over

### Page 15

Agricultural Technology                    15                            DBE/May/June 2024
                                    SC/NSC Confidential

5.3       Match EACH device in the table below with a use. Write only the letter (A–E)
          next to the question numbers (5.3.1 to 5.3.5) in the ANSWER BOOK.

                          DEVICE                                   USE
                           5.3.1

                                                  A. wheel-locking mechanism used
                                                  in 4x4 vehicles

                           5.3.2

                                                  B. a device that facilitates a drive
                                                  shaft to operate at an angle

                           5.3.3

                                                  C. provides two-directional force

                           5.3.4

                                                  D. transfer drive from the tractor to
                                                  the drawn implement

                           5.3.5

                                                  E. used to hitch a trailer to a
                                                  tractor's tow bar

                                                                                                  (5)

Copyright reserved                                                                  Please turn over

### Page 16

Agricultural Technology                           16                            DBE/May/June 2024
                                           SC/NSC Confidential

5.4       The baling machine in photo A makes round bales and the baler in photo B
          makes rectangular bales.

                                A                                         B

          5.4.1           Write, in tabular form, TWO advantages and TWO disadvantages
                          of EACH type of baler.                                                       (8)

          5.4.2           Name TWO methods that can be used to load large bales onto
                          a trailer.                                                                   (2)

          5.4.3           Certain safety measures need to be followed when bales are
                          transported to a shed. State TWO of these safety measures.                   (2)

5.5       The three-point mechanism on a tractor is connected to different implements
          to perform a variety of primary and secondary cultivation tasks.

          5.5.1           Name the part that enables the lifting arms to start moving.                 (1)

          5.5.2           Name part A.                                                                 (1)

          5.5.3           Explain what will happen to the plough if the top link, labelled B, is
                          not connected when the tractor starts moving forward.                        (2)

Copyright reserved                                                                       Please turn over

### Page 17

Agricultural Technology                   17                         DBE/May/June 2024
                                   SC/NSC Confidential

5.6       Single- and double-action hydraulic cylinders are commonly used in farm
          equipment for various purposes. Identify the types of hydraulic cylinders
          shown in the pictures below.

                  5.6.1 Car jack      5.6.2 Excavator     5.6.3 Hydraulic press

                                                                                          (3)
                                                                                          [40]

Copyright reserved                                                          Please turn over

### Page 18

Agricultural Technology                          18                          DBE/May/June 2024
                                          SC/NSC Confidential

QUESTION 6: WATER MANAGEMENT

Start this question on a NEW page.

6.1       Study the picture of a centre-pivot irrigation system below and answer the
          questions that follow.

          6.1.1           State TWO advantages of using this irrigation system.                  (2)

          6.1.2           Name TWO communication devices that a farmer can use to
                          effectively control the system.                                        (2)

          6.1.3           Name TWO tips a farmer must consider before choosing the type
                          of fertiliser to apply through a centre-pivot irrigation system.       (2)

6.2       Study the two water pumping methods below and answer the questions that
          follow.

                                A                                       B

          6.2.1           When would a farmer prefer pump A over pump B?                         (3)

          6.2.2           List THREE factors to consider when choosing a new pump for an
                          irrigation field.                                                      (3)

          6.2.3           Give THREE reasons why PVC pipes are preferred over steel
                          pipes to supply water to an irrigation system.                         (3)

          6.2.4           The water source in picture A has a volume of 72 000 litres. The
                          pump has a pump capacity of 120 ℓ/min. Calculate the time it will
                          take to empty the water source. Show ALL calculations.                 (4)

Copyright reserved                                                                 Please turn over

### Page 19

Agricultural Technology                           19                            DBE/May/June 2024
                                           SC/NSC Confidential

6.3       Name TWO types of drainage systems that can be used to remove excess
          water around the buildings of a dairy farm.                                               (2)

6.4       Name TWO different water purification methods that can be used to purify
          brackish water.                                                                           (2)

6.5       Study the image of a home sewage water treatment system below and
          answer the questions that follow.

          6.5.1           Explain the construction and working of the distribution field that is
                          connected to the septic tank.                                             (3)

          6.5.2           Give TWO reasons why a distribution field should NOT be built
                          near drinking water installations or boreholes.                           (2)

6.6       Name TWO instances where VRT (variable rate technology) can be used in
          precision farming.                                                                        (2)
                                                                                                    [30]

                                                                         TOTAL SECTION B:           160
                                                                            GRAND TOTAL:            200

Copyright reserved

## Related documents

- [Agricultural Technology May-June 2024 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-memorandum-english/57faf85a-afb6-414c-bf66-0e0ede28ff4b) — Agricultural Technology · Memo · 2024 · Eng
- [Agricultural Technology May-June 2023 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-afr/0a79565a-1cf4-4b59-bd47-7c7ae750b4f3) — Agricultural Technology · QP · 2023 · Afr
- [Agricultural Technology May June 2022 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-afr/ccd38003-2303-4ac6-b6d8-0c07141d8a3f) — Agricultural Technology · QP · 2022 · Afr
- [Agricultural Technology May June 2022 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2022-eng/8efb3673-3f48-4d22-aad9-4af8efb3c7be) — Agricultural Technology · QP · 2022 · Eng
- [Agricultural Technology May June 2021 Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-afr/7ffbeef7-3f87-4cff-a5d4-5a92f3861dd1) — Agricultural Technology · QP · 2021 · Afr
- [Agricultural Technology May June 2021 Eng](https://www.hlayiso.com/library/agricultural-technology-may-june-2021-eng/3f54a9c3-3e0a-4cf0-a219-4664361b8bd4) — Agricultural Technology · QP · 2021 · Eng

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology Nov 2025 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/69e68c35-b84c-4320-b0d8-58fcb6116f22) — Memo · 2025 · Eng
- [Agricultural Technology Nov 2025 MG Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/84499f01-76f1-43ac-8b53-d844857b9e13) — Memo · 2025 · Afr
- [Agricultural Technology Nov 2024 MG Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-eng/5735a5ce-d167-4c13-bf13-9b5b710aed67) — Memo · 2024 · Eng
- [Agricultural Technology Nov 2024 MG Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-afr/fce88f27-4539-47d4-b4b5-d7ddad4cd2a6) — Memo · 2024 · Afr
- [Agricultural Technology May-June 2023 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2023-mg-afr/49b9303d-33e4-4f5e-adbe-90dbadf7c5b7) — Memo · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
