# Agricultural Technology Grade 12 NSC November 2025 QP (Eng)

> Grade 12 Agricultural Technology question paper from the NSC November Exam 2025 (English), 17 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/d47614f1-1c99-4acc-87f4-eefd7c63d61e
- Updated: 2026-09-28
- Subject: Agricultural Technology
- Grade: Grade 12
- Document type: Question paper
- Year: 2025
- Exam period: NSC November Exam
- Curriculum: CAPS
- Pages: 17

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Agricultural Technology](https://www.hlayiso.com/library/grade-12/agricultural-technology) › [Agricultural Technology Grade 12 NSC November 2025 QP (Eng)](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-question-paper/d47614f1-1c99-4acc-87f4-eefd7c63d61e)

## About this document

Agricultural Technology · Grade 12 · NSC November Exam · 2025. Question paper, 17 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Confidential

                                NATIONAL
                           SENIOR CERTIFICATE

                                   GRADE 12

                       AGRICULTURAL TECHNOLOGY

                               NOVEMBER 2025

MARKS: 200

TIME: 3 hours

                     This question paper consists of 17 pages.

Copyright reserved                                               Please turn over

### Page 2

Agricultural Technology                        2                         DBE/November 2025
                                         NSC Confidential

 INSTRUCTIONS AND INFORMATION

 1.        GENERAL INSTRUCTIONS AND INFORMATION

           1.1        This question paper consists of TWO sections, namely SECTION A
                      and SECTION B.

           1.2        BOTH sections are COMPULSORY.

           1.3        Answer ALL the questions in the ANSWER BOOK.

           1.4        Number the answers correctly according to the numbering system
                      used in this question paper.

           1.5        You may use a non-programmable calculator.

           1.6        Show ALL calculations.

           1.7        Write neatly and legibly.

 2.        SECTION A: SHORT QUESTIONS

           2.1        This section consists of THREE questions.

           2.2        Follow the instructions when answering the questions.

 3.        SECTION B: STRUCTURED LONG QUESTIONS

           3.1        This section consists of FIVE questions.

           3.2        Start EACH question on a NEW page.

Copyright reserved                                                            Please turn over

### Page 3

Agricultural Technology                          3                           DBE/November 2025
                                           NSC Confidential

 SECTION A     2025

 QUESTION 1

 1.1       Various options are provided as possible answers to the following questions.
           Choose the answer and write only the letter (A–D) next to the question numbers
           (1.1.1 to 1.1.10) in the ANSWER BOOK, e.g. 1.1.11 D.

           1.1.1          In a hazardous situation, you must first spot the potential hazard,
                          then assess the risk and finally you must …

                          A   act irresponsibly.
                          B   lie down and wait for help.
                          C   panic.
                          D   make changes to eliminate or control the hazard.

           1.1.2          To prevent an injury when working with the power take-off (PTO)
                          shaft, the operator should …

                          A   never deactivate the sensitivity element.
                          B   stop the power take-off before dismounting from the tractor.
                          C   use a slip clutch to safely operate the power take-off shaft.
                          D   climb over the power take-off shaft to keep spectators away.

           1.1.3          The main structure of the centre-pivot irrigation system consists of
                          several pipe sections, usually made of ...

                          A   galvanised steel.
                          B   cast iron.
                          C   aluminium.
                          D   magnesium.

           1.1.4          Which ONE of the following is NOT a work design (ergonomic)
                          hazard?

                          A   Lifting of a tractor tyre
                          B   Working with high voltage
                          C   Moving heavy workshop machinery
                          D   Repositioning I-beam sections

           1.1.5          The … valve should be opened first when lighting an oxyacetylene
                          flame.

                          A   oxygen
                          B   argon
                          C   acetylene
                          D   carbon dioxide

Copyright reserved                                                               Please turn over

### Page 4

Agricultural Technology                            4                          DBE/November 2025
                                             NSC Confidential

           1.1.6          Which ONE of the following will have a positive influence on a
                          tractor's centre of gravity?

                          A   Filling the tractor's rear wheels with water
                          B   Increasing the carrying height of the front-end loader
                          C   Increasing speed when turning a corner
                          D   Increasing the load on the trailer

           1.1.7          Workplace stress, such as harassment, is a health hazard that can
                          cause a/an … illness.

                          A   occupational
                          B   parasitic
                          C   infectious
                          D   genetic

           1.1.8          The floating ... of the ram baler constantly rotates and feeds the hay
                          to the packing arms.

                          A   roller
                          B   auger
                          C   pick-up wheel
                          D   flywheel

           1.1.9          A herbicide has a mixing ratio of 5 mℓ herbicide to 1 ℓ of water.
                          Determine the amount of herbicide that must be added to 20 ℓ of
                          water:

                          A   50 mℓ
                          B   0,1 ℓ
                          C   100 ℓ
                          D   1ℓ

           1.1.10         The background colour of the safety signs found on electric fencing
                          must be ...

                          A   yellow.
                          B   black.
                          C   white.
                          D   red.                                                      (10 x 2)      (20)

Copyright reserved                                                                 Please turn over

### Page 5

Agricultural Technology                           5                             DBE/November 2025
                                            NSC Confidential

 1.2       Change the underlined word(s) in each of the following statements to make the
           statements TRUE. Write only the appropriate word(s) next to the question
           numbers (1.2.1 to 1.2.5) in the ANSWER BOOK, e.g. 1.2.6 Tractor.

           1.2.1          A regulator controls the one-directional flow of water in an irrigation
                          system.

           1.2.2          Mild steel coated with magnesium must be welded with caution
                          because it gives off poisonous gases.

           1.2.3          Three-phase current consists of 220–240 volts.

           1.2.4          Variable-rate technology is used to determine location by using
                          various satellites.

           1.2.5          The rotor of a wind turbine is connected to a main shaft that spins a
                          motor that generates electricity.                             (5 x 2)       (10)

 1.3       Choose a word/term from COLUMN B that matches a description
           in COLUMN A. Write only the letter (A–J) next to the question numbers
           (1.3.1 to 1.3.5) in the ANSWER BOOK, e.g. 1.3.6 K.

                               COLUMN A                                  COLUMN B
           1.3.1          Is mainly used for bearings and      A   biofuel
                          does not seize and swell on
                          shafts                               B   Harry Ferguson

           1.3.2          An alternative fuel made from        C   grease
                          vegetable oil
                                                               D   resin
           1.3.3          A permanent layer applied to
                          metal fence posts to prevent         E   tin and lead
                          corrosion
                                                               F   Vesconite
           1.3.4          The designer of the three-point
                          mechanism                            G   ethanol

           1.3.5          Low viscosity fluids that can be     H   petrol
                          transformed into a tough, flexible
                          solid by adding a hardening          I   paint
                          agent
                                                               J   Henry Ford
                                                                                          (5 x 2)     (10)

                                                                            TOTAL SECTION A:          40

Copyright reserved                                                                 Please turn over

### Page 6

Agricultural Technology                          6                         DBE/November 2025
                                           NSC Confidential

 SECTION B

 QUESTION 2: MATERIALS AND STRUCTURES

 Start this question on a NEW page.

 2.1       Study the picture of stainless steel pipes below and answer the questions that
           follow.

           2.1.1          Name THREE alloy elements found in stainless steel and state ONE
                          influence of EACH.                                                      (6)

           2.1.2          Which of the following welding machines, MIG or TIG, is preferred
                          when welding stainless steel? Motivate your answer.                     (3)

 2.2       A farmer needs to repair a brass bell by brazing it. What precautionary
           measures must he/she take to prevent cracks and brittleness?                           (2)

 2.3       Describe what is meant by the adhesion properties of an adhesive.                      (2)

 2.4       Discuss FOUR physical hazards for the human body when working with
           fibreglass and state a precautionary measure to prevent EACH hazard.                   (8)

 2.5       List THREE actions that can be taken to improve the earthing efficiency of an
           electrical fence.                                                                      (3)

Copyright reserved                                                             Please turn over

### Page 7

Agricultural Technology                       7                           DBE/November 2025
                                        NSC Confidential

 2.6       Give ONE word/term for each of the following descriptions by choosing a
           word/term from the list below. Write only the word/term next to the question
           numbers (2.6.1 to 2.6.6) in the ANSWER BOOK. Each word/term may only be
           used ONCE.

                     earth spike; insulator; 10 kVA; sparking; energiser;
                                lightning arrester; power source

                            DESCRIPTION                                  WORD/TERM
            Occurs if there is a crack in or a loose connection on         2.6.1
            an electric fence
            Maximum voltage allowed for an electric fence                    2.6.2
            The negative pole of the energiser is connected to this          2.6.3
            component
            Prevents damage to the energiser from lightning                  2.6.4
            strikes
            Converts battery power into a high-voltage pulse                 2.6.5
            Prevents the electric fence wires from touching the              2.6.6
            fence posts                                                                          (6)

 2.7       Identify the components of an electric fence in the diagram below. Write only the
           answer next to the question numbers (2.7.1 to 2.7.5) in the ANSWER BOOK,
           e.g. 2.7.6 Solar.

                                                                                                 (5)
                                                                                                 [35]

Copyright reserved                                                            Please turn over

### Page 8

Agricultural Technology                       8                          DBE/November 2025
                                        NSC Confidential

 QUESTION 3: ENERGY

 Start this question on a NEW page.

 3.1       Study the picture of a wind turbine below and answer the questions that follow.

           3.1.1      Name the function of EACH of the following wind turbine parts, as
                      indicated by the labels in the picture above:

                      (a)   Propeller blade                                                     (1)

                      (b)   Tower                                                               (1)

                      (c)   Gearbox                                                             (1)

                      (d)   Generator                                                           (1)

           3.1.2      Describe how this system generates electricity.                           (3)

Copyright reserved                                                           Please turn over

### Page 9

Agricultural Technology                      9                             DBE/November 2025
                                       NSC Confidential

 3.2       Geothermal energy is one of the most underutilised renewable energy sources
           on Earth. Study the picture below and answer the questions that follow.

                                 GEOTHERMAL POWER PLANT

           3.2.1      State FIVE advantages of geothermal energy.                                (5)

           3.2.2      Name ONE instance where the use of geothermal energy can pollute
                      the environment.                                                           (1)

           3.2.3      State the consequence if too much cold water is pumped into the
                      geothermal heat source.                                                    (1)

 3.3       Study the picture below and answer the questions that follow.

           3.3.1      Name TWO products used in the manufacturing of ethanol.                    (2)

           3.3.2      Identify the processes, indicated by A and B, when manufacturing
                      ethanol.                                                                   (2)

 3.4       Name TWO plants used to manufacture bio-diesel.                                       (2)
                                                                                                 [20]

Copyright reserved                                                            Please turn over

### Page 10

Agricultural Technology                        10                         DBE/November 2025
                                          NSC Confidential

 QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES

 Start this question on a NEW page.

 4.1       The image below shows an oxyacetylene welding apparatus.

           4.1.1          Name the type of metal used to manufacture the cutting nozzle
                          indicated by arrow A in the image above.                               (1)

           4.1.2          Make FOUR suggestions to ensure high-quality welding joints when
                          oxyacetylene welding is done in the overhead welding position.         (4)

 4.2       Identify the welding defects by studying the causes in the table below.
           Write only the name of the defect next to the question numbers (4.2.1 to 4.2.4)
           in the ANSWER BOOK.

                                    CAUSE                              DEFECT
              - Draughty conditions                            4.2.1
              - Painted, wet or oily welding surface
              - Wet or rusty filler wire
              - Preparation too narrow                         4.2.2
              - Root gap too small
              - Worn contact tip causing irregular arc
              - Inadequate inductance                          4.2.3
              - Current too low
              - Rusty or primed plate
              - Welding speed too fast                         4.2.4
              - Current too high
              - Poor welding technique
                                                                                                 (4)

Copyright reserved                                                            Please turn over

### Page 11

Agricultural Technology                        11                         DBE/November 2025
                                          NSC Confidential

 4.3       SCENARIO

           A farm manager needs to design a cover for a self-feeder trough.

           Use the following information to design and draw a freehand sketch of a cover
           for the trough:

            •      Width 750 mm
            •      Length 1 000 mm
            •      Angle iron 25 mm x 25 mm
            •      Metal sheet 3 mm
            •      Two hinges
            •      Locking mechanism

           Marks will be allocated for:

            Proportional drawing                         (1)
            Practical application                        (2)
            Two hinges                                   (1)
            Lock mechanism                               (1)
            Two measurements                             (2)
            Cutting list of material to be used          (2)                                     (9)

 4.4       Study the picture below of a plasma-cutting machine and answer the questions
           that follow.

           4.4.1          Give TWO reasons for using a welding helmet while working with
                          the plasma-cutting machine.                                            (2)

           4.4.2          Why would you recommend the use of nitrogen gas when using the
                          plasma-cutting machine?                                                (2)

           4.4.3          Name the material used to manufacture the plasma-cutting machine
                          electrode.                                                             (1)

Copyright reserved                                                            Please turn over

### Page 12

Agricultural Technology                        12                          DBE/November 2025
                                          NSC Confidential

           4.4.4          State FOUR advantages of using a plasma-cutting apparatus.             (4)

           4.4.5          State FOUR consequences when moisture enters the plasma-cutter
                          nozzle.                                                                (4)

           4.4.6          What adjustment must be made to the plasma-cutting machine to
                          cut various metal thicknesses?                                         (1)

 4.5       The gases in the list below are all used in plasma cutting for the cutting of
           various types of metals.

           Indicate which gas will be used for EACH of the following applications.
           Write only the gas next to the question numbers (4.5.1 to 4.5.3) in the ANSWER
           BOOK.

                                  air;   hydrogen;     nitrogen;   argon

                        APPLICATION                                  GAS
             High-quality cutting for mild              4.5.1
             aluminium, stainless steel or carbon
             steel
             Used to cut thick steel and metal          4.5.2
             and is the hottest gas available
             Cuts with a consistent speed and           4.5.3
             lengthens the life of the machine                                                   (3)
                                                                                                 [35]

Copyright reserved                                                            Please turn over

### Page 13

Agricultural Technology                          13                         DBE/November 2025
                                            NSC Confidential

 QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT

 Start this question on a NEW page.

 5.1       Study the picture below and answer the questions that follow.

           5.1.1          Identify the part in the picture above.                                     (1)

           5.1.2          Describe the working of the part identified in QUESTION 5.1.1.              (2)

 5.2       The pictures below show two types of gears used in farm machinery.

                                        A                           B

           5.2.1          Identify gears A and B as shown in the pictures above.                      (2)

           5.2.2          Two gears connected in a drive system have a ratio of 1 : 3.
                          Calculate the number of teeth on the driven gear if the drive gear
                          has 60 teeth.

                          Show ALL calculations.                                                      (4)

Copyright reserved                                                                 Please turn over

### Page 14

Agricultural Technology                          14                            DBE/November 2025
                                            NSC Confidential

 5.3       The picture below shows a rotary cutting machine that is used on a farm.

           5.3.1          This machine is very dangerous. Give FIVE safety tips that must be
                          followed when operating the machine above.                                    (5)

           5.3.2          List THREE points to consider when maintenance is done on the
                          rotary cutting machine.                                                       (3)

           5.3.3          Describe the hitching of the rotary cutting machine to a tractor.             (4)

 5.4       A hydraulic cylinder used in a tractor is shown below.

           5.4.1          Name the type of hydraulic cylinder shown in the picture above.               (1)

           5.4.2          Describe the working of this kind of hydraulic cylinder.                      (4)

           5.4.3          Name THREE advantages of the transmission oil that is used in
                          hydraulic systems.                                                            (3)

           5.4.4          Which side of this hydraulic cylinder is the strongest? Motivate your
                          answer.                                                                       (3)

Copyright reserved                                                                   Please turn over

### Page 15

Agricultural Technology                         15                         DBE/November 2025
                                           NSC Confidential

 5.5       Study the picture of a clutch plate found on a tractor below and answer the
           questions that follow.

                                                                     `

           5.5.1          Arrow A shows a clutch plate lining. What material is used for the
                          manufacturing of the lining?                                            (1)

           5.5.2          Name TWO properties of the friction material of a good clutch
                          system.                                                                 (2)

           5.5.3          Give TWO reasons for equipping tractors with a clutch system.           (2)

 5.6       Upon inspection of a second-hand tractor, the farmer noticed some disturbing
           signs while the engine was idling. Give a diagnosis of the THREE signs below
           that show that there is something wrong with the engine:

           5.6.1          Black exhaust smoke                                                     (1)

           5.6.2          Rattling noise coming from the engine                                   (1)

           5.6.3          Engine heats up quickly                                                 (1)
                                                                                                  [40]

Copyright reserved                                                             Please turn over

### Page 16

Agricultural Technology                      16                          DBE/November 2025
                                        NSC Confidential

 QUESTION 6: WATER MANAGEMENT

 Start this question on a NEW page.

 6.1       Study the photograph of a centre-pivot irrigation system below and answer the
           questions that follow.

           6.1.1      Give THREE reasons why the system as above is considered to be a
                      labour-saving irrigation system.                                          (3)

           6.1.2      Describe how water can be effectively applied through a centre-pivot
                      irrigation system.                                                        (4)

 6.2       State THREE benefits of using irrigation software in the management of
           irrigation systems.                                                                  (3)

Copyright reserved                                                           Please turn over

### Page 17

Agricultural Technology                      17                          DBE/November 2025
                                        NSC Confidential

 6.3       Study the water purification system in the picture below and answer the
           questions that follow.

           6.3.1      Give TWO reasons for installing the system indicated by arrow A.       (2)

           6.3.2      List THREE effective methods that can be used to make brackish
                      water drinkable.                                                       (3)

 6.4       Draw a neat labelled sketch of a septic tank system.

           Mark allocation:

           Design         2
           Drawing        2
           Labels         2                                                                  (6)

 6.5       Name THREE different types of home drainage systems.                              (3)

 6.6       Precision farming is a combination of several technologies.

           6.6.1      State FOUR advantages of the use of variable-rate technology (VRT)
                      on a farm.                                                             (4)

           6.6.2      Name TWO advanced technological systems, except VRT, that are
                      used in precision farming.                                             (2)
                                                                                             [30]

                                                                    TOTAL SECTION B:         160
                                                                       GRAND TOTAL:          200

Copyright reserved

## Related documents

- [Agricultural Technology Nov 2025 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/69e68c35-b84c-4320-b0d8-58fcb6116f22) — Agricultural Technology · Memo · 2025 · Eng
- [Agricultural Technology Nov 2025 MG Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2025-nsc-november-exam-memorandum/84499f01-76f1-43ac-8b53-d844857b9e13) — Agricultural Technology · Memo · 2025 · Afr
- [Agricultural Technology Nov 2023 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2023-afr/c3b8b589-9e64-4570-b82b-604d612b5c5d) — Agricultural Technology · QP · 2023 · Afr
- [Agricultural Technology Nov 2023 Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2023-eng/86f6afe6-d48c-4deb-850f-b5ecd800d688) — Agricultural Technology · QP · 2023 · Eng
- [Agricultural Technology Nov 2022 Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2022-eng/c3d21a49-1d99-4db4-89e1-881053003584) — Agricultural Technology · QP · 2022 · Eng
- [Agricultural Technology Nov 2020 Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2020-afr/a61a52db-ba87-4f60-93f1-8aa7f810b224) — Agricultural Technology · QP · 2021 · Afr

## More from Grade 12 Agricultural Technology

- [Gr 12 Agric Tech ATP 2023-24](https://www.hlayiso.com/library/gr-12-agric-tech-atp-2023-24/9d982b07-0af2-4c43-8efe-886b4631bf17) — ATP
- [Agricultural Technology May-June 2025 MG Afr](https://www.hlayiso.com/library/agricultural-technology-may-june-2025-mg-afr/5f3f1dd7-8ba2-41ba-97bd-f8a4f9dfbdd5) — Memo · 2025 · Afr
- [Agricultural Technology Nov 2024 MG Eng](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-eng/5735a5ce-d167-4c13-bf13-9b5b710aed67) — Memo · 2024 · Eng
- [Agricultural Technology Nov 2024 MG Afr](https://www.hlayiso.com/library/agricultural-technology-nov-2024-mg-afr/fce88f27-4539-47d4-b4b5-d7ddad4cd2a6) — Memo · 2024 · Afr
- [Agricultural Technology May-June 2024 MG Afr](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-memorandum-afrikaans/3365189d-e03a-49db-801a-0b473132a0f4) — Memo · 2024 · Afr
- [Agricultural Technology May-June 2024 MG Eng](https://www.hlayiso.com/library/grade-12-agricultural-technology-2024-nsc-june-exam-memorandum-english/57faf85a-afb6-414c-bf66-0e0ede28ff4b) — Memo · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
