# Civil Technology Grade 12 NSC June 2024 Memo (English) > Grade 12 Civil Technology memorandum from the NSC June Exam 2024 (English), 21 pages. Read online or download the free PDF. - Page: https://www.hlayiso.com/library/grade-12-civil-technology-2024-nsc-june-exam-memorandum-english/c689a7f0-6c6d-4893-943b-9e5aa390c71c - Updated: 2026-09-28 - Subject: Civil Technology - Grade: Grade 12 - Language: English - Document type: Memorandum - Year: 2024 - Exam period: NSC June Exam - Curriculum: CAPS - Pages: 21 Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Civil Technology](https://www.hlayiso.com/library/grade-12/civil-technology) › [Civil Technology Grade 12 NSC June 2024 Memo (English)](https://www.hlayiso.com/library/grade-12-civil-technology-2024-nsc-june-exam-memorandum-english/c689a7f0-6c6d-4893-943b-9e5aa390c71c) ## About this document Civil Technology · Grade 12 · NSC June Exam · 2024 · English. Memorandum, 21 pages. Read online or download the PDF. Read it free online on the page above; download the PDF from there. ## Document text Text extracted from the PDF. Layout, diagrams and tables may not survive extraction. ### Page 1 SENIOR CERTIFICATE EXAMINATIONS/ NATIONAL SENIOR CERTIFICATE EXAMINATIONS CIVIL TECHNOLOGY: WOODWORKING MAY/JUNE 2024 MARKING GUIDELINES MARKS: 200 These marking guidelines consist of 21 pages. Copyright reserved Please turn over ### Page 2 Civil Technology: Woodworking 2 DBE/May/June 2024 SC/NSC – Marking Guidelines INSTRUCTIONS FOR MARKERS 1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre-marking but should strictly adhere to the answers after finalisation of the marking guideline. • There are TWO approaches to answering questions; these are (1) to describe and (2) to explain. 1. If a candidate is required to explain e.g., a process in 4 steps, only the first 4 responses should be considered. 2. However, if for example candidate is required to explain or describe a process, we need to consider that that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if the candidate explained the required outcome satisfactorily and allocate marks on merit. • Mark what the candidate wrote and do not interpret or predict responses. • Indicate the tick or cross right at the position where the mark needs to be awarded or where the candidate made the error. • Accept the letter corresponding with the correct answer as well as the answer written in full in multiple-choice questions or similar questions. • Accept incorrect spelling in answers unless the spelling changes the meaning of the answer. • If a learner writes two or more answers separated by a slash (/) mark only the first response, unless the additional answer/s are different names for the same item e.g., Yale lock/Night latch. In this case, the answer for the response should be awarded and the slash (/) should NOT be considered as an additional answer. 2. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question. • Marks will only be allocated for the correct values if the candidates add instead of multiply. NO marks will be awarded for the calculations and the answer. • Where an incorrect answer is correctly carried over, the marker must recalculate the values, using the incorrect answer from the first calculation. If correctly used, the candidate should receive the full marks for subsequent calculations. • Alternative methods of calculations must be considered, provided that the correct answer is obtained. • For the calculation of quantities marks will be awarded for the correct use of the dimension paper. Copyright reserved Please turn over ### Page 3 Civil Technology: Woodworking 3 DBE/May/June 2024 SC/NSC – Marking Guidelines 3. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated incorrect member provided that the marking guideline provide for TWO or more marks for that member (positive marking). • Marks can only be awarded for a label if the label is correctly indicating the correct member. Do not consider labels for members of which the labels were provided on the answer sheet. • Scale drawings should always be marked using an appropriate mask. • If the incorrect/wrong drawing was drawn, the candidate can be awarded for only what was provided for on the marking guideline. • If a line diagram or an orthographic view instead of a pictorial drawing (isometric/oblique/perspective) is drawn, the first assessment criteria for each member will be marked wrong, but marks will be awarded for the subsequent members if TWO or more marks are awarded for the same member. • If candidates draw/give more information than what is required, mark strictly according to the assessment criteria. 4. Incorrect numbering of questions: • If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response. • If questions were answered randomly not following the same sequence as in the question paper and the learner numbered incorrectly, the response should NOT be marked. 5. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer book, mark the response on the answer sheet and cancel the response in the answer book. • If the question was answered in the answer book instead of on the answer sheet, mark the response in the answer book according to the assessment criteria on the marking guideline. Copyright reserved Please turn over ### Page 4 Civil Technology: Woodworking 4 DBE/May/June 2024 SC/NSC – Marking Guidelines QUESTION 1: OHSA, MATERIALS, TOOLS, EQUIPMENT AND JOINING (GENERIC) 1.1 1.1.1 D✓ (1) 1.1.2 D✓ (1) 1.1.3 B✓ (1) 1.1.4 C✓ (1) 1.1.5 B✓ (1) 1.1.6 B✓ (1) 1.1.7 A✓ (1) 1.1.8 D✓ (1) 1.1.9 C✓ (1) 1.1.10 A✓ (1) 1.1.11 B✓ (1) 1.1.12 A✓ (1) 1.2. 1.2.1 Rawl plugs/Plastic plugs with screws/Coach screws/Lag bolts ✓ (1) 1.2.2 Rawl plugs/Plastic plugs with screws/Coach screws/Lag bolts: • Are strong fasteners ✓ • Resist pull out failure ✓ • Have excellent carrying capacity • Easy to install • Are cost effective ANY TWO OF THE ABOVE (2) 1.2.3 • Drill holes/Drill holes and remove the debris ✓ • Position the cabinet and insert the rawl plugs/plastic plugs into the holes through the cabinet ✓ OR Insert plastic plugs into the holes, position the cabinet and insert the joining fixtures into the holes through the cabinet • Tighten the screws/Insert the screws into the holes and tighten the screws ✓ (3) 1.3. 1.3.1 Multi detector ✓ (1) 1.3.2 Laser level/Spirit level ✓ (1) [20] Copyright reserved Please turn over ### Page 5 Civil Technology: Woodworking 5 DBE/May/June 2024 SC/NSC – Marking Guidelines QUESTION 2: GRAPHICS AS MEANS OF COMMUNICATION (GENERIC) NO. QUESTIONS ANSWERS MARKS Name the type of building that is Multi-storey building/ 1. 1 illustrated by FIGURE A. Three-storey building ✓ Deduce from the building plan the North elevation/North ✓ 1 2. elevation on which the sink is located. Ridge capping/Ridge/Roof/ 3. Identify number 1. 1 Roof covering/Hipped end ✓ Why are balusters installed at 4. To prevent people from falling off ✓ 1 number 2? What type of material was specified Laminated safety glass/Safety 5. 1 for number 3? glass ✓ Recommend ONE suitable material for 6. number 4. Timber/Fibre cement ✓ 1 Who is the owner of the proposed 7. Mr P Xhosa ✓ 1 dwelling? Identify the number that indicates the 8. 5✓ 1 downpipe. Name ONE other sanitary fixture, 9. besides a washbasin, that can be Shower/Bath/Bidet/Urinal ✓ 1 installed in the bathroom. 10. Identify number 7. Distribution board/DB ✓ 1 To access the garage with a 11. Describe the purpose of number 8. 1 vehicle ✓ How many fluorescent tubes are 12. 1✓ 1 indicated in the building? 13. Name the street in which the new Protea Street ✓ 1 building will be erected. Copyright reserved Please turn over ### Page 6 Civil Technology: Woodworking 6 DBE/May/June 2024 SC/NSC – Marking Guidelines What type of finish was specified for 14. Stone cladding ✓ 1 the walls? Deduce from the building plan why it Drawing of balustrades/Balustrades 15. 1 was revised. were not drawn ✓ What must be installed to gain access 16. Stairs ✓ 1 to the first and second floor? Deduce from the building plan who 17. Architect ✓ and Client ✓ 2 must sign off the building plan. What are the prescribed dimensions 18. 40 mm x 40 mm x 1 200 mm ✓ 1 for the balusters? How many hinged window openings 19. are indicated on window 2 in the 1✓ 1 window schedule? • To have electricity during load shedding ✓ Provide a reason for installing solar • To save on electricity cost 20. 1 panels on the roof. • To be independent from electricity providers • To ensure exposure to sun light The interior door frames are covered 21. with plywood. Draw the symbol for ✓✓ 2 plywood. Draw the symbol for a wall mounted ✓✓ 22. 2 urinal. Describe the top end shape of the 23. Square ✓ 1 baluster. Copyright reserved Please turn over ### Page 7 Civil Technology: Woodworking 7 DBE/May/June 2024 SC/NSC – Marking Guidelines 2,6 ✓ + 0,17 ✓ + 2,6 ✓ + 0,17 ✓ + 2,6 ✓ + 1,8 m ✓ = 9,94 ✓ m Calculate the total height of the OR building from the finished floor level up 24. 2 600 + 170 + 2 600 + 170 7 to the top of the roof. Give your answer in m. + 2 600 + 1 800 mm = 9 940 mm = 9,94 m Calculate the area of the external wall = (2,6 ✓ x 12 ✓) – (2,1 ✓ x 1,8 ✓) 25. of the second floor from the top of the = 31,2 ✓ – 3,78 m² ✓ 7 floor up to roof height in the west = 27,42 ✓ m² elevation in FIGURE A. Show ALL OR calculations Give your answer in m². = (2 600 x 12 000) – (2 100 x 1 800) = 31 200 000 – 3 780 000 mm² = 27 420 000 m2 = 27,42 m² TOTAL: 40 Copyright reserved Please turn over ### Page 8 Civil Technology: Woodworking 8 DBE/May/June 2024 SC/NSC – Marking Guidelines QUESTION 3: CUPBOARDS, CASEMENTS, WALL-PANELING AND QUANTITIES (SPECIFICS) 3.1 3.1.1 A - Window pane/Glass ✓ C - Top rail of casement/Top rail ✓ (2) 3.1.2 To keep the window pane in place. ✓ (1) A B C D 3.2.1 Number of queen posts: 7/ ✓ 2 ✓ 14 ✓ =7x2 = 14 queen posts (3) 3.2.2 Number of tie beams: 7/ 1✓ 7✓ =7x1 = 7 tie beams (2) 3.2.3 Total length of timber required for the tie beams: Length of a tie beam is 5 320 mm 7/ ✓ 5,32 ✓ 37,24 m ✓ 37,24 m timber needed (3) Correct use of dimension paper ✓ (1) Copyright reserved Please turn over ### Page 9 Civil Technology: Woodworking 9 DBE/May/June 2024 SC/NSC – Marking Guidelines 3.3 V-GROOVE 1 TONGUE-AND-GROOVE BOARDS 1 2 HORIZONTAL ROUGH GROUNDS 2 NOTE: DO NOT PENALISE CANDIDATES IF V-GROOVE IS NOT DRAWN NO. ASSESSMENT CRITERIA MARK 1 Tongue and groove boards 2 2 Horizontal rough grounds 2 TOTAL: 4 (4) Copyright reserved Please turn over ### Page 10 Civil Technology: Woodworking 10 DBE/May/June 2024 SC/NSC – Marking Guidelines 3.4 A 1 TOP BACK 2 3 SIDE OF CUPBOARD 4 4 SHELVING DRAWER BACK SIDE OF DRAWER BACK BOTTOM OF 4 DRAWER DRAWER FRONT 5 7 6 8 BOTTOM OF UNIT 9 BACK 10 KICK PLATE 12 11 A SIDE OF BASE BACK OF BASE NO. ASSESSMENT CRITERIA MARK 1 Top 1 2 Back (Thinner than melamine boards) 1 3 Side of cupboard (1 x mark if front is closed) 1 4 Shelving 3 5 Side of drawer 1 6 Drawer back 1 7 Drawer front 1 8 Drawer bottom (Thinner than melamine boards) 1 9 Bottom of unit 1 10 Side of base 1 11 Kick plate 1 12 Back of base 1 TOTAL: 14 (14) [30] Copyright reserved Please turn over ### Page 11 Civil Technology: Woodworking 11 DBE/May/June 2024 SC/NSC – Marking Guidelines QUESTION 4: ROOFS, CEILINGS, TOOLS, EQUIPMENT AND MATERIALS (SPECIFIC) 4.1 4.1.1 G✓ (1) 4.1.2 C✓ (1) 4.1.3 H✓ (1) 4.1.4 F✓ (1) 4.1.5 A✓ (1) 4.2 4.2.1 Number/Code ✓ (1) 4.2.2 turpentine ✓ (1) 4.2.3 Linseed oil ✓ (1) 4.2.4 beetles/insects ✓ (1) 4.2.5 groove ✓ (1) 4.3 Constructing a conventional trap door: • Cut two pieces of brandering to size and secure it over/under/to two tie beams ✓ • Cut two pieces of brandering and secure them between the two branderings that was installed over/under/to the tie beams to form a square ✓ • Cut the hole in the ceiling boards and secure ceiling boards in position ✓ • Install the cover strips to finish off the frame ✓ • Cut the ceiling board for the trapdoor to size and fit into opening to rest on cover strip ✓ (5) Copyright reserved Please turn over ### Page 12 Civil Technology: Woodworking 12 DBE/May/June 2024 SC/NSC – Marking Guidelines 4.4 ADVANTAGES DISADVANTAGES • Cool in summer and warm in • Extremely vulnerable to fire and winter ✓ must be treated with fireproof • Ideally suited for roofs that have chemicals before use ✓ irregular profiles and • More expensive to install than compilations or appear more ordinary roofing because ‘organic’ ✓ thatching is a labour intensive • Requires less timber for the roof activity ✓ structure • Demands more maintenance • Does not need ceilings • Susceptible to decay because thatch is an organic material • Ridge capping needs to be rethatched every four to six years • Can cause allergies ANY TWO OF EACH OF THE ABOVE (4) Copyright reserved Please turn over ### Page 13 Civil Technology: Woodworking 13 DBE/May/June 2024 SC/NSC – Marking Guidelines 4.5 Installing of thatch roof: • Nail the rafter poles to the roof trusses ✓ • Place a layer of special aluminium foil or other fireproof material on top of the rafter poles ✓ • Use bundles of clean, dry, high-quality thatch and fix them to the rafter poles using baling or tie wire ✓ • Finish/Install the ridge capping ✓ (4) 4.6 4.6.1 A - Hurricane clip ✓ B - Storm clip ✓ (2) 4.6.2 A - Hurricane clip: • To fix purlins to roof trusses ✓ • To fix trusses to wall plates ✓ • To fix opposite faces of members • Where members of a truss cross each other • Ideally used at eave overhangs ANY TWO OF THE ABOVE (2) B - Storm clip: • To secure roof tiles to brandering ✓ • To fasten ridge tiles to each other ✓ • To fasten ceiling tiles • To prevent clay and concrete tiles from being lifted by strong winds ANY TWO OF THE ABOVE (2) 4.7 To prevent leaking at nail or screw: • Neoprene washer ✓ • Rubber washer • Roofing caps • Cap roof seal • Sealing tape ANY ONE OF THE ABOVE (1) 4.8 • 45° ✓ • 90° ✓ (2) 4.9 Members for closed eave: • Vertical hangers/Soffit hangers ✓ • Horizontal soffit hangers/Soffit hangers ✓ • Soffit boards/Fibre-cement boards ✓ • Quarter-rounds ✓ (4) Copyright reserved Please turn over ### Page 14 Civil Technology: Woodworking 14 DBE/May/June 2024 SC/NSC – Marking Guidelines 4.10 4.10.1 Determine cutting speed of jigsaw: • The type of wood/timber/material to be cut ✓ • The thickness of the wood/timber/material • The type of blade to be used • The cutting speed can be controlled by listening to the sound of the motor ANY ONE OF THE ABOVE (1) 4.10.2 Why pre-cuts are needed: • To prevent the blade from bending ✓ • To prevent the blade from getting stuck • To prevent the blade from breaking • To prevent the material from getting damaged • To ensure the accuracy of the cut ANY ONE OF THE ABOVE (1) 4.10.3 • Drill a hole through the wood on the inside of the circle ✓ • Insert the blade of the jigsaw through the hole in the wood and start cutting along the marked line ✓ (2) [40] Copyright reserved Please turn over ### Page 15 Civil Technology: Woodworking 15 DBE/May/June 2024 SC/NSC – Marking Guidelines QUESTION 5: CENTERING, FORMWORK, SHORING AND GRAPHICS AS MEANS OF COMMUNICATION (SPECIFIC) 5.1 Timber/Wood ✓ (1) 5.2 Props/Struts/Dead shores ✓ (1) 5.3 Dead shores: Steel dogs secures the joint between the prop and needle. ✓ Double flying shore: Steel dogs secures the braces and vertical struts to the horizontal shores. ✓ (2) 5.4 Folding wedges ✓ (1) 5.5 1 2 YOKE/COLLAR 4 5 3 5 2 1 NOTE: THE MIRROR IMAGE OF THIS ANSWER WILL ALSO BE CORRECT NO. ASSESSMENT CRITERIA MARK Threaded rods (2 x threaded rods =1 1 2 mark) and nuts (2 x nuts = 1 mark) 2 Vertical clamps (1 x top + 1 x bottom) 2 3 Horizontal clamp 1 4 Yoke/Collar 1 Laggings (1 x closed laggings + 1 x 5 2 complete laggings) TOTAL: 8 (8) Copyright reserved Please turn over ### Page 16 Civil Technology: Woodworking 16 DBE/May/June 2024 SC/NSC – Marking Guidelines 5.6 3 3 1 OPEN LAGGINGS 4 4 CLOSED LAGGING 2 NO. ASSESSMENT CRITERIA MARK 1 Both ribs re-drawn (both must be drawn for 1 mark) 1 Printed titles (only award 1 mark if laggings are drawn in 2 1 and labelled) Open laggings: (1 mark for 2 openings) 3 2 (1 mark for 3 laggings) Closed laggings: (1 mark for 2 closings) 4 2 (1 mark for 3 laggings) TOTAL: 6 (6) Copyright reserved Please turn over ### Page 17 Civil Technology: Woodworking 17 DBE/May/June 2024 SC/NSC – Marking Guidelines 5.7 6 5 2 4 1 4 4 3 6 7 4 4 STILE RAIL 8 4 8 8 4 4 NO. ASSESSMENT CRITERIA MARK 1 Projection lines (any one) 1 2 Height of mortise 1 3 Opening of mortise 1 4 Depth of mortise 1 5 Back of mortise 1 Width of mortise (1 x top + 6 2 1 x bottom) 7 Inside of mortise 1 8 Hidden detail of stile 3 TOTAL: 11 (11) [30] Copyright reserved Please turn over ### Page 18 Civil Technology: Woodworking 18 DBE/May/June 2024 SC/NSC – Marking Guidelines QUESTION 6: SUSPENDED FLOORS, STAIRCASES, IRON MONGERY, DOORS AND JOINING (SPECIFIC) 6.1 Cut cupboard locks are suitable for locking: • Cupboard doors ✓ • Wardrobe doors ✓ • Office desk doors • Cabinet doors ANY TWO OF THE ABOVE (2) 6.2 One need to mention: • Whether it is for a right-hand or left-hand door ✓ • The size of the lock ANY ONE OF THE ABOVE (1) 6.3 Preparing the mortise for a joint: A - Measure the width of the lock rail ✓ B - Set/Mark the lengths of the mortises ✓ C - Set/Mark the thickness/width of the mortises (by dividing wood in three equal parts) ✓ D - Mark the waste material ✓ (4) 6.4 1 2 3 DOOR FRAME NO. ASSESSMENT CRITERIA MARK 1 Door frame 1 2 Rebate 1 3 Hatching 1 TOTAL: 3 1 3 2 JAMB NO. ASSESSMENT CRITERIA MARK 1 Planted stop 1 2 Jamb (Vertical lining) 1 3 Hatching 1 TOTAL: 3 (6) Copyright reserved Please turn over ### Page 19 Civil Technology: Woodworking 19 DBE/May/June 2024 SC/NSC – Marking Guidelines 6.5 NO. ASSESSMENT CRITERIA MARK 1 1 Panel 1 2 2 Rebate 1 TOTAL: 2 RAISED PANEL NO. ASSESSMENT CRITERIA MARK 1 Panel 1 1 2 Rebate (angled) 1 TOTAL: 2 2 RAISED AND FIELDED PANEL (4) Copyright reserved Please turn over ### Page 20 Civil Technology: Woodworking 20 DBE/May/June 2024 SC/NSC – Marking Guidelines 6.6 A 4 4 3 1 5 1 3 2 2 NO. ASSESSMENT CRITERIA MARK 1 Flight of stairs (before landing + after landing) 2 2 Half-landing 2 Indications of the rise of stairs (arrow before landing + 3 2 arrow after landing) 4 Newel posts (any two in correct position) 2 5 Open well 1 TOTAL: 9 (9) Copyright reserved Please turn over ### Page 21 Civil Technology: Woodworking 21 DBE/May/June 2024 SC/NSC – Marking Guidelines 6.7 2 1 1 5 4 4 5 3 7 8 6 6 8 2 NOTE: A 90º ROTATION OF THIS ANSWER WILL ALSO BE CORRECT NO. ASSESSMENT CRITERIA MARK Floor joists (2 marks if all 8 are drawn) 1 2 (1 mark for less than 8 drawn) Floor joist built into wall (1 mark for top wall + 1 mark for 2 2 bottom wall) 3 Joists equally spaced 1 Staggered struts (2 marks if all 7 are drawn) 4 2 (1 mark for less than 7 drawn) 5 Folding wedges (1 x left + 1 x right) 2 6 Tongue-and-groove floorboards 2 7 Floor placed in the correct direction 1 8 Clearance between floorboards and wall (1 x left + 1 x right) 2 TOTAL: 14 (14) [40] TOTAL: 200 Copyright reserved ## Related documents - [CIV TECH GR12 QP SEPT2024 Construction English](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2024-construction-english/12643629-87af-4230-a48a-002beb7f6cd7) — Civil Technology · QP · 2024 · Eng - [CIV TECH GR12 MEMO SEPT2022 Woodworking English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2022-woodworking-english/62d9cbb1-1077-4edb-86c4-7a21fd6749a9) — Civil Technology · Memo · 2022 · Eng - [CIV TECH GR12 MEMO SEPT2022 Civil Services English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2022-civil-services-english/896ddb1f-2144-4bfc-a35a-3a71507d7637) — Civil Technology · Memo · 2022 · Eng - [CIV TECH GR12 MEMO SEPT2021 English Civil Services](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2021-english-civil-services/80eb9860-b118-41e2-98fd-5bea1b29a026) — Civil Technology · Memo · 2021 · Eng - [CIVIL TECH GR12 MEMO GR12 SEPT2017 English](https://www.hlayiso.com/library/civil-tech-gr12-memo-gr12-sept2017-english/fcb77566-a1ac-4dff-af72-678e70ccfbc4) — Civil Technology · Memo · 2017 · Eng - [Civil Technology May June 2019 (Civil Services) Memo Afr](https://www.hlayiso.com/library/civil-technology-may-june-2019-civil-services-memo-afr/2a9b9e1b-37dc-48dc-9aa7-67dd5fa19a10) — Civil Technology · Memo · 2019 · Afr ## More from Grade 12 Civil Technology - [Civil Technology Nov 2025 (Woodworking) Afr](https://www.hlayiso.com/library/grade-12-civil-technology-2025-nsc-november-exam-question-paper/05a95faf-5891-4d88-9e5e-7d13c1d21648) — QP · 2025 · Afr - [Civil Technology Nov 2024 (Woodworking) Afr](https://www.hlayiso.com/library/civil-technology-nov-2024-woodworking-afr/eefaae29-fe93-4b75-8223-87bf4f3fc14c) — QP · 2024 · Afr - [Civil Technology Nov 2024 (Civil Services) Afr](https://www.hlayiso.com/library/civil-technology-nov-2024-civil-services-afr/307147a5-3280-4a11-a82e-cf3e33388eb0) — QP · 2024 · Afr - [CIV TECH GR12 QP SEPT 2023 Construction English](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept-2023-construction-english/4163a632-f091-41bf-8a36-993d566fb2cc) — QP · 2023 · Eng - [Civil Technology Nov 2023 (Construction) Eng](https://www.hlayiso.com/library/civil-technology-nov-2023-construction-eng/e6743728-8140-42ae-838d-282654a975a5) — QP · 2023 · Eng - [Civil Technology Nov 2023 (Civil Services) Afr](https://www.hlayiso.com/library/civil-technology-nov-2023-civil-services-afr/b820ac91-947c-4aed-821f-256aa13aabe1) — QP · 2023 · Afr ## Collection - [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers) --- Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.