# Civil Technology Grade 12 NSC June 2024 Question Paper (Eng)

> Grade 12 Civil Technology question paper from the NSC June Exam 2024 (English), 24 pages. Read online or get the free PDF download, memo linked when available.

- Page: https://www.hlayiso.com/library/grade-12-civil-technology-2024-nsc-june-exam-question-paper-english/33113e1d-4516-42da-9b7d-fde1b4299eed
- Updated: 2026-09-28
- Subject: Civil Technology
- Grade: Grade 12
- Language: English
- Document type: Question paper
- Year: 2024
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 24

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Civil Technology](https://www.hlayiso.com/library/grade-12/civil-technology) › [Civil Technology Grade 12 NSC June 2024 Question Paper (Eng)](https://www.hlayiso.com/library/grade-12-civil-technology-2024-nsc-june-exam-question-paper-english/33113e1d-4516-42da-9b7d-fde1b4299eed)

## About this document

Civil Technology · Grade 12 · NSC June Exam · 2024 · English. Question paper, 24 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Confidential

basic education

Department:
Basic Education
Wy REPUBLIC OF SOUTH AFRICA

gop
Ke)

SENIOR CERTIFICATE EXAMINATIONS/
NATIONAL SENIOR CERTIFICATE EXAMINATIONS

CIVIL TECHNOLOGY: WOODWORKING

MAY/JUNE 2024

MARKS: 200

TIME: 3 hours

This question paper consists of 14 pages and 8 answer sheets.

Copyright reserved Please turn over

### Page 2

Civil Technology: Woodworking 2 DBE/May/une 2024

SC/NSC Confidential

REQUIREMENTS:

1.
2.
3.

Drawing instruments
A non-programmable caiculator
ANSWER BOOK

INSTRUCTIONS AND INFORMATION

1.

2
3.
4

a

o oa ND

11.

12.

13.
14.

15.

16.

17.

18.

This question paper consists of SIX questions.
Answer ALL the questions.
Read ALL the questions carefully.

Answer each question as a whole. Do NOT separate subsections of
questions.

Number the answers correctly according to the numbering system used in this
question paper.

Start the answer to EACH question on a NEW page.
Do NOT write in the margins of the ANSWER BOOK.
You may use sketches to illustrate your answers.

Write ALL calculations and answers in the ANSWER BOOK or on the
attached ANSWER SHEETS.

Use the mark allocation as a guide to the length of your answers.

Make drawings and sketches in pencil, fully dimensioned and neatly finished
off with descriptive titles and notes to conform to the SANS/SABS Code of
Practice for Building Drawings.

For the purpose of this question paper, the size of a brick should be taken as
220 mm x 110 mm x 75 mm.

Use your own discretion where dimensions and/or details have been omitted.

Answer QUESTIONS 2, 3.2, 3.3, 3.4, 5.5, 5.7, 6.6 and 6.7 on the attached
ANSWER SHEETS using drawing instruments, where necessary.

Write your CENTRE NUMBER and EXAMINATION NUMBER on every
ANSWER SHEET and hand them in with your ANSWER BOOK, whether you
have used them or not.

Drawings in the question paper are NOT to scale due to electronic transfer.

Google Images was used as the source of all photographs and pictures.

Write neatly and legibly.

Copyright reserved Please turn over

### Page 3

Civil Technology: Woodworking 3 DBE/May/June 2024

QUESTION 1:

SC/NSC Confidential

OHSA, MATERIALS, TOOLS, EQUIPMENT AND JOINING
(GENERIC).

Start this question on a NEW page.

11 Various options are provided as possible answers to the following questions.
Choose the answer and write only the letter (A-D) next to the question

numbers (1.1.1 to 1.1.12) in the ANSWER BOOK, e.g. 1.1.13 D.

1.1.1

1.1.6

Copyright reserved

Water-based paint ...

A_ canbe applied to wet wood.

B_ allows moisture to penetrate surfaces.
C_ takes days to dry.

D gives an elastic and flexible finish.

Zinc can be applied to metals to ....

A_ increase the thickness of the metal.
Badd strength to the original metal.
C prevent rust.

D_ All the above-mentioned

... improves the engineering and mechanical properties of metal.

A Curing

B_ Electroplating
Cc Galvanising
D Painting

Toe boards are attached to a scaffold platform to ...

A fix the scaffold platform to it.

B | stabilise the scaffold.

C_ prevent tools from falling off.

D prevent workers from falling off.

The maximum height for a trestle scaffold:

A 6m
B 3m
Cc 8m
D 10m

Suspended scaffolds can be made of ...

fibreglass.
steel.
graphite.
fibre cement.

0OUY

Please turn over

(1)

(1)

(1)

(1)

(1)

(1)

### Page 4

Civil Technology: Woodworking 4

1.1.9

1.1.10

1.1.11

1.1.12

Copyright reserved

SC/NSC Confidential

A... can be used to dispose of waste material.

A conveyer belt and chute
Bladder

C_ scaffold

D_ None of the above-mentioned

Properties that define a builder's hoist:

A Itis a lifting device

B_ The type of power

C_ The size of the cables
D OnlyAandB

DBE/May/June 2024

Workers must not use ... stairways that will be a temporary part of

the structure when carrying materials.

A straight

B timber
Csspiral
D_half landing

Stairways must not be installed more than
horizontal.

A 50
B 30
c 40
D 75

... degrees from the

When a ladder is placed against a wall, the angle must be at a ratio

of...

A
B
Cc
D

aa oo
aOnkw

AJAn ... ladder must never be used near electrical cables.

aluminium
timber
synthetic
fibreglass

C0ONDY

Please turn over

(1)

(1)

(1)

(1)

(1)

(1).

### Page 5

Civil Technology: Woodworking 5 DBE/May/June 2024

SC/NSC Confidential
1.2 You have been tasked to install a bathroom cabinet against a wall.
1.2.1 Name the joining fixture you will use to secure the cabinet. (1)
1.2.2 Motivate why you will use this joining fixture. (2)
1.2.3 Explain how you will install the cabinet with pre-drilled holes by
using the joining fixture in QUESTION 1.2.1. The positions of the
holes have been marked on the wall. (3)
1.3 You have been asked by a contractor to install a shower in a bathroom.
1.3.1 Name the tool to detect existing water pipes in the wall. (1)
1.3.2 Name the tool to ensure that the top of the cubicle is level. (1)

[20]
QUESTION 2: GRAPHICS AS MEANS OF COMMUNICATION (GENERIC)
Start this question on a NEW page.

FIGURE A and FIGURE B on the next page show drawings that appear on a building
plan. Analyse the drawings and complete the table on ANSWER SHEET 2.

Copyright reserved Please turn over

### Page 6

Civil Technology: Woodworking 6 DBE/May/June 2024
SC/NSC Confidential
S| O NOTES:
2 1 Contractors must verify all
©
- QOL dimensions and levels on site

SOLAR PANELS

2 600

F 2.600

170 '"

2 600

FFL

before commencing work.

Architects to be notified
of any discrepancies immediately.

Finishing of walls: Stone cladding

Sliding doors are installed with
laminated safety glass

Dimensions of sliding doors:
2 100 mm x 1 800 mm

Concrete stairs according
to engineer's specifications

Balusters: To be made of 40 mm x
40 mm steel tubing and a height of
1200 mm

Architect's signature ............606

|
| 12 000 | Client's signature ........0.....
A 7A
FIGURE A
REVISION | DATE: DRAWING OF
1 20/02/2024 | BALUSTRADES
5 500 5 840
PRINTED BY: DATE OF PRINT:
220 4 220 |) za FOX PRINTERS 22/04/2024
a
iN DRAWING TITLE: GROUND FLOOR AND
wi wi WEST ELEVATION
er es
© a 3 PROJECT:
g PROPOSED DWELLING OF MR P XHOSA
>) BATHROOM STORE ROOM = {in PLOT 46, PROTEA STREET, PHOENIX
| :
H i) PROJECT NO.: DRAWING NO.:
@———-+ GARAGE Q GR 320-224 446P5
KITCHEN QR 1x40 W DATE: DRAWN: | CHECKED:
i S$ 16/04/2024 JN KRIEL E BUYS
- oO
3 0) ELEVATION AND
FLOOR PLAN SCALE 1: 100
) : = {_{ REFERENCE CODE
— eg) 8 QP 6 ~ 2024
{ a] 3 WINDOW SCHEDULE
N
aa ST IG a
g &
(8) al| yf
Cl N 600,
FIGURE B 5000 vt
“wt [40]

Copyright reserved

Please turn over

### Page 7

Civil Technology: Woodworking 7 DBE/May/June 2024
SC/NSC Confidential

QUESTION 3: CUPBOARDS, CASEMENTS, WALL-PANELLING AND
QUANTITIES (SPECIFIC)

Start this question on a NEW page.

3.1 FIGURE 3.1 below shows a vertical section through a double casement
where the rails are lipped and rebated into the frame window with a fanlight.
C is part of the casement.

tM

ea

FIGURE 3.1
3.1.1 Identify part A and C. (2)
3.1.2 Describe the function of B. (1)

Copyright reserved Please turn over

### Page 8

Civil Technology: Woodworking 8 DBE/May/June 2024
SC/NSC Confidential

3.2 FIGURE 3.2 below shows a line diagram of a South African (Howe) roof truss.

5 320

FIGURE 3.2
Use the following specification:
e The roof has SEVEN South African (Howe) roof trusses.

Use ANSWER SHEET 3.2 and calculate the following:

3.2.1 The total number of queen posts (3)
3.2.2 The total number of tie beams (2)
3.2.3 The total length of timber required for the tie beams (3)
NOTE: A mark will be awarded for the correct use of the dimension paper. (1)

3.3 Use ANSWER SHEET 3.3 and draw the front view of the middle section of
the wall panelling indicating TWO tongue and groove boards that are partly
removed to reveal TWO horizontal rough grounds. (4)

3.4 ANSWER SHEET 3.4 shows the front view of the framework of a freestanding
cupboard without the doors. Project the detail of the freestanding cupboard
and draw a sectional left view on cutting plane A-A.

Use the following specifications:

e The cupboard is made of 16 mm melamine boards.
e The drawer bottom is made of 3 mm hardboard.
e The back is made of 3 mm hardboard.

DO NOT show any hidden detail on the drawing. (14)
[30]

Copyright reserved Please turn over

### Page 9

Civil Technology: Woodworking 9 DBE/May/June 2024
SC/NSC Confidential

QUESTION 4: ROOFS, CEILINGS, TOOLS, EQUIPMENT AND MATERIALS
(SPECIFIC)

Start this question on a NEW page.

4.1 Choose a description from COLUMN B that matches the item in COLUMN A.

Write only the letter (A-H) next to the question numbers (4.1.1 to 4.1.5) in the
ANSWER BOOK, e.g. 4.1.6 J.

COLUMN A COLUMN B
4.1.1. Table saw A aV-block must be used to drill holes
into cylindrical parts

4.1.2 Bandsaw
B grip the handle with your right hand

4.1.3 Combination belt and to pull the rotating blade towards
disc sander you
4.1.4 Spindle moulder C ensure that the blade guides and
blade supports are in the right
4.1.5 Drill press position

D_ when drum sanding is done, feed
the work with the direction of the
rotating bit

E _ only use half of the capacity of the
machine when cutting thin wood

F the stock should be fed slowly into
the cutters

G _ ensure that the splitter is in position
when doing rip cutting

H always move the work slowly across
the table and against the abrasive
material

(5 x 1) (5)
4.2 Change the underlined word(s) in the following to make the statements
correct. Write the appropriate word(s) next to the question numbers
(4.2.1 to 4.2.5) in the ANSWER BOOK.

4.2.1 The letter next to the SABS symbol indicates the grading method

and the colour indicates the strength. (1)
4.2.2 Traditional wax, made by adding thinners to beeswax, has been
replaced by ready-made polishes. (1)

Copyright reserved Please turn over

### Page 10

Civil Technology: Woodworking 10 DBE/May/June 2024

4.3

44

4.5

4.6

47

48

4.9

SC/NSC Confidential

4.2.3 Lacquer penetrates and feeds the wood.
4.2.4 Timber is preserved to protect it from being infested by rodents.

4.2.5 When selecting timber for skirting, you must consider whether it
should have a strip at the back.

Explain how you would construct the frame of a trap door, finished off with
timber cover strips.

State TWO advantages and TWO disadvantages of a thatched roof. Tabulate
your answer.

Explain how you will install a thatched roof.

FIGURE 4.6 below shows two different fixtures used in roofing.

FIGURE 4.6
4.6.1 Identify A and B.
4.6.2 State TWO uses of A and B respectively.

Name ONE essential part that must be used with roofing fasteners to prevent
leakage at the screw or nail.

Truss hangers are used to join members of a roof together. Name the angles
that truss hangers are manufactured in.

Due to birds nesting under the open eave of your roof, you want to change
the open eave of the roof to a closed eave. List FOUR members that you
need to add to the construction in order to make it a closed eave.

Copyright reserved Please turn over

(1)
(1)

(1)

(5)

(4)
(4)

(2)
(4)

(1)

(2)

(4)

### Page 11

Civil Technology: Woodworking 11 DBE/May/June 2024
SC/NSC Confidential

4.10 Safe handling and care is of utmost importance when using the jigsaw
illustrated in FIGURE 4.10 below.

FIGURE 4.10
4.10.1 What determines the cutting speed of the machine? (1)
4.10.2 Explain why it is important to perform precuts when using the
jigsaw. (1)
4.10.3 Explain, in TWO steps, the procedure to cut out a circle in a piece
of wood after the circle has been marked out. (2)
[40]

Copyright reserved Please turn over

### Page 12

Civil Technology: Woodworking 12 DBE/May/June 2024

SC/NSC Confidential

QUESTION 5: CENTERING, FORMWORK, SHORING AND GRAPHICS AS

MEANS OF COMMUNICATION (SPECIFIC)

Start this question on a NEW page.

5.1

5.2

5.3

5.4

5.5

5.6

5.7

Name the material that can be used for soleplates for dead shores.

The soleplates spread the transferred load over a wider area. Name the part
that transfers the load onto the soleplates.

Differentiate between dead shores and double flying shores regarding the use
of stee! dogs.

Which member will be used to enable height adjustments when working with
shores?

ANSWER SHEET 5.5 shows an incomplete horizontal sectional view of
formwork for a round column. Draw ONE half of the formwork for the round
column where horizontal clamps are used to tighten the yokes/collars. Print
the label of the yoke/collar.

FIGURE 5.6 below shows part of a rib when working with centering.

FIGURE 5.6

Use your ANSWER BOOK and re-draw TWO ribs to differentiate between
open and closed laggings to support a segmental arch. Print the title under
each drawing. Show at least THREE laggings in each drawing.

ANSWER SHEET 5.7 shows a drawing of an exploded isometric view of a
long and short shoulder mortise and tenon joint. The rail is completed with
hidden detail and the stile is incomplete.

Project the measurements from the given detail on the rail and complete ALL
hidden detail of the mortise (hole) and the stile.

Copyright reserved Please turn over

(1)

(1)

(2)

(1)

(8)

(6)

(11)
[30]

### Page 13

Civil Technology: Woodworking 13 DBE/May/June 2024
SC/NSC Confidential

QUESTION 6: SUSPENDED FLOORS, STAIRCASES, IRONMONGERY, DOORS
AND JOINING (SPECIFIC)

Start this question on a NEW page.

6.1 Name TWO types of doors that can be locked with cut cupboard locks. (2)
6.2 What is important to mention when buying a cut cupboard lock or a straight
cupboard lock? (1)

6.3 FIGURE 6.3 shows the steps of marking out of the mortises of a double stub
mortise and tenon joint for the lock rail of a three-panel door.

NOTE: The short dash lines indicate the width of the lock rail.

Explain what is done in the steps shown in A-D below.

- ie ~ J

se ms, NPS r ~

xX

K

IN NS

x

x
"Zy Z Z A

A B c D
FIGURE 6.3 (4)

6.4 In the ANSWER BOOK, differentiate by means of drawings between the
horizontal sectional views of a door frame and a jamb (vertical lining). (6)

6.5 In the ANSWER BOOK, differentiate by means of two-dimensional drawings
between the front views of a raised panel and a raised and fielded panel. (4)

6.6 ANSWER SHEET 6.6 shows the top view of a stairwell at a school where a
staircase between two floors needs to be installed. Draw the layout of the
stairs with a half-landing and an open well between the two flights of stairs.
Indicate the rise of the stairs and the newel posts on the drawing. A indicates
the lower floor level. (9)

Copyright reserved Please turn over

### Page 14

Civil Technology: Woodworking 14 DBE/May/June 2024
SC/NSC Confidential

6.7 ANSWER SHEET 6.7 shows the floor plan of a storeroom with a very high
ceiling. You have to install a suspended timber floor to make use of the
available space. Use ANSWER SHEET 6.7 to design and draw a
two-dimensional drawing of the top view of the suspended timber floor.

Use the following specifications:

e The size of the material used for the floor joists is 114 mm x 38 mm.
e The floor joists must be built into the walls.
© Eight floor joists, equally spaced, are used for the floor.
« Staggered struts should be used as support.
e Folding wedges need to be installed on both sides in order to tighten the
struts.
e There must be a clearance between the wall and the floorboards.
e Draw. ONLY TWO floorboards in the bottom right corner to show the
effect of the floorboards installed. (14)
[40]
TOTAL: 200

Copyright reserved

### Page 15

Civil Technology: Woodworking

SC/NSC Confidential

[ CENTRE NUMBER: LTT I

DBE/May/June 2024

[EXAMINATION NUMBER: | [| | |

ANSWER SHEET 2
NO. QUESTIONS ANSWERS MARKS
1 Name the type of building that is 1
‘ illustrated by FIGURE A.
2 Deduce from the building plan the 1
. elevation on which the sink is located.
3. Identify number 1. 1
Why are balusters installed at
4. 1
number 2?
5 What type of material was specified 1
‘ for number 3?
6 Recommend ONE suitable material for 1
, number 4.
Who is the owner of the proposed
7. . 1
dwelling?
8 Identify the number that indicates the 1
: downpipe.
Name ONE other sanitary fixture,
9. besides a washbasin, that can be 1
installed in the bathroom.
10. | Identify number 7. 1
11. | Describe the purpose of number 8. 1
12 How many fluorescent tubes are 1
| indicated in the building?
13. | Name the street in which the new 1
building will be erected.

Copyright reserved

### Page 16

Civil Technology: Woodworking DBE/May/June 2024
SC/NSC Confidential
| CENTRE NUMBER: [ | [| [] [ J
[EXAMINATION NUMBER: | | | | | | L [ ]
14 What type of finish was specified for
~ | the walls?
15 Deduce from the building plan why it
* | was revised.
16 What must be installed to gain access
* | to the first and second floor?
47 Deduce from the building plan who
* | must sign off the building plan.
18 What are the prescribed dimensions
* | for the balusters?
How many hinged window openings
19. | are indicated on window 2 in the
window schedule?
20 Provide a reason for installing solar
* | panels on the roof.
The interior door frames are covered
21. | with plywood. Draw the symbol for
plywood.
22 Draw the symbol for a wall mounted
* urinal.
23 Describe the top end shape of the

baluster.

Copyright reserved

### Page 17

Civil Technology: Woodworking DBE/May/June 2024
SC/NSC Confidential

[ CENTRE NUMBER: TT TT 7 7 7 JT]

[EXAMINATIONNUMBER: | | | | | | | | | [| [| [| | J

Calculate the total height of the
building from the finished floor level up
to the top of the roof. Give your
answer in m.

24,

Calculate the area of the external wall
of the second floor from the top of the
25. | floor up to roof height in the west
elevation in FIGURE A. Show ALL
calculations. Give your answer in m?.

TOTAL:

Copyright reserved

### Page 18

Civil Technology: Woodworking

SC/NSC Confidential

| CENTRE NUMBER:

| | |] TT J

DBE/May/June 2024

[EXAMINATION NUMBER: |

=

ANSWER SHEET 3.2

Dimension paper

3.2.1

3.2.2

3.2.3

Copyright reserved

A B Cc D
(3)
(2)
(3)
Correct use of dimension paper (1)

### Page 19

Civil Technology: Woodworking

SC/NSC Confidential

| CENTRE NUMBER: |

DBE/May/June 2024

[EXAMINATIONNUMBER: | | | | | | | | [| [| [| J J 4
ANSWER SHEET 3.3
ASSESSMENT CRITERIA
NO. _| MARK | CANDIDATE'S MARK
1 2
2 2
TOTAL:| 4

Copyright reserved

### Page 20

Civil Technology: Woodworking DBE/May/June 2024

SC/NSC Confidential
| CENTRE NUMBER: [| |] J] | J J] 4]
[EXAMINATIONNUMBER: | [| | | | | | | [| | | [| J |
ANSWER SHEET 3.4
A-
T
|
|
ct
I | |
A— WIDTH OF CABINET
ASSESSMENT CRITERIA
NO. _| MARK | CANDIDATE'S MARK
1 1
2 1
3 1
4 3
5 1
6 1
7 1
8 1
9 1
10 1
1 1
12 1
TOTAL: | _14

Copyright reserved

### Page 21

Civil Technology: Woodworking DBE/May/June 2024

SC/NSC Confidential
[ CENTRE NUMBER: TT TT TT Ty 4)
[EXAMINATIONNUMBER: | | | | | | | | | | | | J 4
ANSWER SHEET 5.5
—
ASSESSMENT CRITERIA
NO. _| MARK | CANDIDATE'S MARK
1 2
2 2
3 1
4 1
5 2
TOTAL:| 8

Copyright reserved

### Page 22

Civil Technology: Woodworking DBE/May/June 2024
SC/NSC Confidential

[CENTRE NUMBER: T | [ J] | J JT 4

[EXAMINATIONNUMBER: | | [| | | | | | [| [| | [| | J

ANSWER SHEET 5.7

¥

‘

ecehecscsscccs..
Serevent ie!
,

nq
ms

dM ce menaweteceneee ne Wee

Neos:

STILE —+}
ASSESSMENT CRITERIA
NO. | MARK | CANDIDATE'S MARK
1 1
2 1
3 1
4 1
5 3
6 1
7 3
TOTAL: | 11

Copyright reserved

### Page 23

Civil Technology: Woodworking

SC/NSC Confidential

| CENTRE NUMBER: |

DBE/May/June 2024

[ EXAMINATION NUMBER: |

l

ANSWER SHEET 6.6

Copyright reserved

A
ASSESSMENT CRITERIA
NO. MARK | CANDIDATE'S MARK
1 2
2 2
3 2
4 2
5 1
TOTAL: 9

### Page 24

Civil Technology: Woodworking DBE/May/June 2024
SC/NSC Confidential

| CENTRE NUMBER: TT] [ [ | TT 7 4

[EXAMINATIONNUMBER: | | | | | | | | | [| | | J J

ANSWER SHEET 6.7

ASSESSMENT CRITERIA
NO. _| MARK | CANDIDATE'S MARK
1 2
2 2
3 1
4 2
5 2
6 2
7 1
8 2
TOTAL: | 14

Copyright reserved

## Related documents

- [CIV TECH GR12 MEMO SEPT2024 Civil Services English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-civil-services-english/c1f2441d-22ba-4ae6-9e56-137cc442080c) — Civil Technology · Memo · 2024 · Eng
- [CIV TECH GR12 MEMO SEPT2024 Construction English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-construction-english/4d9c54ef-f526-46ad-82d4-8dd419eafb50) — Civil Technology · Memo · 2024 · Eng
- [CIV TECH GR12 MEMO SEPT2024 Woodworking English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2024-woodworking-english/6e7f4be5-4ffb-4654-b98b-b4cc4dfc4cc7) — Civil Technology · Memo · 2024 · Eng
- [CIV TECH GR12 QP SEPT2022 Woodworking English](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2022-woodworking-english/c3b4a7c0-761a-45aa-a578-9b98afc86830) — Civil Technology · QP · 2022 · Eng
- [CIV TECH GR12 QP SEPT2022 Civil Services English](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2022-civil-services-english/90720b3f-011a-43dc-8be9-862cb2bbc268) — Civil Technology · QP · 2022 · Eng
- [CIV TECH GR12 QP SEPT2021 English Construction](https://www.hlayiso.com/library/civ-tech-gr12-qp-sept2021-english-construction/551ab3e9-47c5-4ab0-a0cf-bc66dda5a956) — Civil Technology · QP · 2021 · Eng

## More from Grade 12 Civil Technology

- [Civil Technology Nov 2025 (Construction) MG Eng](https://www.hlayiso.com/library/grade-12-civil-technology-2025-nsc-november-exam-memorandum/0e265899-dc44-4809-aabf-8f374f1af392) — Memo · 2025 · Eng
- [CIV TECH GR12 MEMO SEPT2023 Construction English](https://www.hlayiso.com/library/civ-tech-gr12-memo-sept2023-construction-english/9ab6f3f0-4774-49bf-8311-57f09822adf6) — Memo · 2023 · Eng
- [Civil Technology Nov 2022 (Civil Services) MG Afr](https://www.hlayiso.com/library/civil-technology-nov-2022-civil-services-mg-afr/42b5315c-825c-40e3-b394-85e0253fc0fb) — Memo · 2023 · Afr
- [Civil Technology Nov 2023 (Civil Services) Afr](https://www.hlayiso.com/library/civil-technology-nov-2023-civil-services-afr/b820ac91-947c-4aed-821f-256aa13aabe1) — QP · 2023 · Afr
- [Civil Technology Nov 2023 (Woodworking) Afr](https://www.hlayiso.com/library/civil-technology-nov-2023-woodworking-afr/f6f7ac38-fb55-4d61-bc66-5441e4cbcee0) — QP · 2023 · Afr
- [Civil Technology Nov 2023 (Woodworking) Eng](https://www.hlayiso.com/library/civil-technology-nov-2023-woodworking-eng/fdfc3cf4-1a3a-4817-a3e9-a2c7f9fe5c2e) — QP · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.