# Information Technology Grade 12 P1 2014 Memo (Eng)

> Grade 12 Information Technology Paper 1 memorandum from the Eastern Cape Mock Exam 2014 (English), 22 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/inft-p1-gr12-sept2014-memo-eng/d0e326f7-1f19-4340-81fc-a7529cdbc69e
- Updated: 2026-09-27
- Subject: Information Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2014
- Exam period: Eastern Cape Mock Exam
- Paper: 1
- Curriculum: CAPS
- Pages: 22

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Information Technology](https://www.hlayiso.com/library/grade-12/information-technology) › [Information Technology Grade 12 P1 2014 Memo (Eng)](https://www.hlayiso.com/library/inft-p1-gr12-sept2014-memo-eng/d0e326f7-1f19-4340-81fc-a7529cdbc69e)

## About this document

Information Technology · Grade 12 · Eastern Cape Mock Exam · 2014. Memorandum, 22 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                     NATIONAL
                SENIOR CERTIFICATE

                         GRADE 12

                SEPTEMBER 2014

         INFORMATION TECHNOLOGY P1
               MEMORANDUM

MARKS:    120

                This memorandum consists of 22 pages.

### Page 2

Downloaded from hlayiso.com
2                               INFORMATION TECHNOLOGY P1                         (SEPTEMBER 2014)

QUESTION 1: DELPHI PROGRAMMING

Mark allocation

                                     Question 1 - Marking Grid
Q                                      Aspect                                     Max.      Learner’s
                                                                                  marks      marks
1.1   1.1.1   Function CCValidate(creditcarnumber:string):boolean;                  2

      1.1.2   CleanCardNumber:='';
              digit:=0;

              // Remove any non numeric value
              for I := 1 to Length(CreditCardNumber) do                            5
              Begin
              if CreditCardNumber[i] in DigitsAllowed then 
              CleanCardNumber:= CleanCardNumber + CreditCardNumber[i]; 
              End;

      1.1.3   // Check for valid card maximum length number
              if (Length(CleanCardNumber)>MaxCCSize) then 
              Begin
              Result:= True;
              Exit;
              End;
              //Check for valid card minimum length number
                                                                                    3
              if (Length(CleanCardNumber)<MinCCSize) then 
              Begin
              Result:= False; 
              Exit;
              End;

      1.1.4   Carrying out the Luhn Algorithm, the student may use any
              method as long as they accomplish the task, iterations, loops and    11
              decision making, rearranging techniques must be applied.

      1.1.5   procedure TForm1.Button1Click(Sender: TObject);
              begin
               If CCValidate(Edit1.text)=true
               then
                  Showmessage('Your Card is Valid' ) 
                                                                                    4
                  Else
                  Showmessage('Card Number is Invalid'); 

              end;

Copyright reserved                                                                 Please turn over

### Page 3

Downloaded from hlayiso.com
(SEPTEMBER 2014)                  INFORMATION TECHNOLOGY P1                  3

1.2   1.2.1    Type TArr=Array[1..10] integer;
              Var
              Form1:TForm1;
              ListA, ListB: TArr; 
              ------------------------------------
                                                                 4
              Begin
              Randomize;
              For i:= 1 to 10 do

              Begin
              ListA[i]:= random(10)+10; 
               Richedit1.Lines.Add(IntToStr(ListA[i])); 

      1.2.2   Var
              K,X, Y,iCntP :integer;
              Dup : Boolean;
              begin

               iCntP := 0;
               For X := 1 to 10 do
                begin
                 Y := X + 1;
                 Dup := False;
                 While (Dup = False) AND ( Y <= 10) DO
                  begin
                   If ListA[X] = ListA[Y] then DUp := True; 
                    y := Y + 1;                                  6
                  end;
                 If Not(Dup) 
                   then begin
                       iCntP := iCntP + 1;
                        ListB[iCntP] := ListA[X]; 
                       end;
                   end;

              For K:=1 to iCntP do
               d.Lines.Add(IntToStr(ListB[K])); 

              end;
                                                                [35]

Copyright reserved                                              Please turn over

### Page 4

Downloaded from hlayiso.com
4                                  INFORMATION TECHNOLOGY P1                  (SEPTEMBER 2014)

SAMPLE: DELPHI SOLUTION QUESTION 1

unit Q_1;

interface

uses
 Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
 Dialogs, StdCtrls;

type
 TForm1 = class(TForm)
  Edit1: TEdit;
  Button1: TButton;
  lblDisplay: TLabel;
  procedure Button1Click(Sender: TObject);
 private
  { Private declarations }
 public
  { Public declarations }
 end;

var
 Form1: TForm1;

implementation

{$R *.dfm}
function CCValidate(CreditCardNumber:string):boolean;

Const
DigitsAllowed = ['0'..'9'];
MaxCCSize = 19;
MinCCSize = 13;

var
i : integer;
CleanCardNumber: string;
digit: Integer;
CheckSum: Integer; { Holds the value of the operation }
Flag: Boolean; { used to indicate when ready }
Counter: Integer; { index counter }
PartNumber: string; { used to extract each digit of number }
Number: Integer; { used to convert each digit to integer}

Begin
CleanCardNumber:='';
digit:=0;

// Remove any non numeric value
for I := 1 to Length(CreditCardNumber) do
Begin
if CreditCardNumber[i] in DigitsAllowed then
CleanCardNumber:= CleanCardNumber + CreditCardNumber[i];
End;

Copyright reserved                                                             Please turn over

### Page 5

Downloaded from hlayiso.com
(SEPTEMBER 2014)                    INFORMATION TECHNOLOGY P1                5

// Check for valid card maximum length number
if (Length(CleanCardNumber)>MaxCCSize) then
Begin
Result:= False;
Exit;
End;
//Check for valid card minimum length number
if (Length(CleanCardNumber)<MinCCSize) then
Begin
Result:= False;
Exit;
End;

// get the starting value for our counter
Counter := Length(CleanCardNumber);
CheckSum := 0;
PartNumber := '';
Number := 0;
Flag := true;

while (Counter >= 1) do
begin
// get the current digit
PartNumber := Copy(CleanCardNumber, Counter, 1);
Number := StrToInt(PartNumber); // convert to integer
if (Flag) then // only do every other digit
begin
Number := Number * 2;
if (Number >= 10) then
Number := Number - 9;
end;
CheckSum := CheckSum + Number;

Flag := not (Flag);

Counter := Counter - 1;
end;

result := ((CheckSum mod 10) = 0);

End;

procedure TForm1.Button1Click(Sender: TObject);
begin
 If CCValidate(Edit1.text)=true
 then
    Showmessage('Your Card is Valid' )
    Else
    Showmessage('Card Number is Invalid');

end;

procedure TForm1.GenerateClick(Sender: TObject);
var
i:integer;

Copyright reserved                                              Please turn over

### Page 6

Downloaded from hlayiso.com
6                                   INFORMATION TECHNOLOGY P1   (SEPTEMBER 2014)

begin
Randomize;
for i := 1 to 10 do
begin
  ListA[i]:= random(10)+10;
  Richedit1.Lines.Add(IntToStr(ListA[i]));
 end;
end;

procedure TForm1.DisplayClick(Sender: TObject);
Var
K,X, Y,iCntP :integer;
Dup : Boolean;
begin

iCntP := 0;
For X := 1 to 10 do
 begin
  Y := X + 1;
  Dup := False;
  While (Dup = False) AND ( Y <= 10) DO
   begin
    If ListA[X] = ListA[Y] then DUp := True;
     y := Y + 1;
   end;
  If Not(Dup)
    then begin
        iCntP := iCntP + 1;
         ListB[iCntP] := ListA[X];
        end;
    end;

For K:=1 to iCntP do
 d.Lines.Add(IntToStr(ListB[K]));

end;

end.

Copyright reserved                                               Please turn over

### Page 7

Downloaded from hlayiso.com
 (SEPTEMBER 2014)               INFORMATION TECHNOLOGY P1                                  7

QUESTION 2: DELPHI PROGRAMMING

                                       Question 2 - Marking Grid
 Q                                    Aspect                            Max.       Learner’s
                                                                        marks       marks
2.1    2.1.1 Defining of the class TDriver
                                                                          1
               TDriver = Class(TObject) 

       2.1.2 Private fields
                    fName:string; 
                    fCountry:String;                                     4
                    fTeam:string; 
                    fTime:real; 

       2.1.3 Defining the parameterised constructor correctly:
               constructor TDriver.Create(sName, sCountry,
               sTeam,sTime: string); 
               Receiving values from the parameters and equating
               them to the private fields:
                    fName:=sName; 
                    fCountry:=sCountry;        
                    fTeam:=sTeam;                                        7

                    fTime:=sTime; 

               Adding the appropriate Uses statement in the interface
               section of the program
               uses
                 SysUtils, StdCtrls, ComCtrls; 

       2.1.4 Declaring The method correctly
               function TDriver.getfName: string;
                                                                          3
               Getting its value correctly
               Result:=copy(fName,1, pos(' ',fName)-1) 

       2.1.5 Declaring The method correctly, can use either string or
             real as long as learner uses it appropriately in the
             program
             function TDriver.getAverage: string; 
             Might use an internal variable to calculate the average
               sAverage,aTime:real;
               Calculation and result done correctly rounding to          5
               nearest whole number
               aTime:=3600*
               strtoint(copy(fTime,1,1))+60*strtoint(copy(fTime,3
               ,2))+strtofloat(copy(fTime,6,6)); 
                 sAverage:=(58*5.95*1000)/aTime; 
                 Result:='The Average speed of '+fName+ ' is
                   '+floattostr(sAverage) +'m/s'; 

 Copyright reserved                                                           Please turn over

### Page 8

Downloaded from hlayiso.com
8                               INFORMATION TECHNOLOGY P1          (SEPTEMBER 2014)

     2.1.6    Declaring The method correctly
              function TDriver.toString: string; 

              Getting its value correctly
              shrs:=strtoint(copy(fTime,1,1));                    6
                smins:=strtoint(copy(fTime,3,2)); 
                sseconds:=strtofloat(copy(fTime,6,6)); 
              result :=fName
                  +#9+fCountry+#9+fTeam+#9+inttostr(shrs)+':'+in
                  ttostr(smins)+'":'+floattostr(sseconds); 

     2.2.1
              uses
                                                                   2
                Datam; 
                AUDatam.ADOTaugp3.Active:=True;

     2.3.1    Code on the Button
                     uses Q2_aurgpunit; 
                     Q2_aurgp2.Showmodal; 
                                                                   4
              On the Form
                     AUDatam.ADOTaugp3.Active:=True; 
                     AUDatam.ADOTaugp3.Sort:='Time'; 

     2.3.2    Reading the database
              AUDatam.ADOTaugp3.Open; 
              AUDatam.ADOTaugp3.First; 
              CREATING THE OBJECT
              Winner:=Tdriver.Create 
                                                                   10
              (AUDatam.ADOTaugp3['Name'], 
              AUDatam.ADOTaugp3['Country'], 
              AUDatam.ADOTaugp3['Team'], 
              AUDatam.ADOTaugp3['Time']); 
              showmessage(Winner.toString); 

     2.4.1    Uses
              Q2_aurgp3unit;                                      2
              Q2_aurgp3unit;.showmodal; 

     2.4.2    Placing all the components required
                                                                   3

Copyright reserved                                                      Please turn over

### Page 9

Downloaded from hlayiso.com
(SEPTEMBER 2014)             INFORMATION TECHNOLOGY P1                               9

     2.4.3    Call Procedure load and Procedure heading;
              begin
              if ((Button = nbFirst) or (Button = nbNext) 
               or (Button = nbPrior) or (Button = nbLast)) 
              then
                  begin
                     Mdriver:=Tdriver.Create(DBedit2.Text,       11
                     DBEdit3.Text, 
                     DBEdit4.Text,
                     DBEdit5.Text); 
                     lblavgdisp.Caption:=Mdriver.getAverage; 
                  end;
              end;

     2.5      Call the procedure load and procedure heading
              begin
              var
              myFile:textfile;
              DrvID , Name, Country : String;
              iTotal : Integer;
              begin
                AssignFile(myFile,'Drivers.txt'); 
                Rewrite(myFile); 

                Writeln(myFile,'DRIVERS AND THEIR
              COUNTRIES':50); 

              Writeln(myFile,'===============================':5
              0); 
                Writeln(myFile,'');
                Writeln(myFile,'DriverID':20, 'Name and
              Surname':30, 'Country':20);                        16
                Writeln(myFile,'------':20,'----------------
              ':30,'---------------':20);
                Writeln(myFile,'');
                   AUDatam.ADOTaugp3.Open; 
                   AUDatam.ADOTaugp3.First; 
                    while not AUDatam.ADOTaugp3.Eof do
                      begin
                       DrvID:=AUDatam.ADOTaugp3['DRID']; 
                       Name:= AUDatam.ADOTaugp3['Name']; 
                       Country:= AUDatam.ADOTaugp3['Country']; 
                       if Country <>'Great Britain' then

              Writeln(myFile,DrvID:20,Name:30,Country:20); 
                       AUDatam.ADOTaugp3.Next; 
                      end;
                  CloseFile(myFile); 
                                                                   [74]

Copyright reserved                                                      Please turn over

### Page 10

Downloaded from hlayiso.com
10                        INFORMATION TECHNOLOGY P1               (SEPTEMBER 2014)

SAMPLE: DELPHI SOLUTION QUESTION 2

Object Class (Games_U)
unit clsDriver;

interface
uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls,
Forms,
  Dialogs, StdCtrls, ComCtrls, Buttons;
type
//========================================================================
=======
TDriver = Class(TObject)
  Private
  fName:string;
  fCountry:String;
  fTeam:String;
  fTime:string;
  Public

  Constructor Create(sName,sCountry,sTeam,sTime:string);
  Function toString:string;
  Function getfName:string;
  Function getAverage:string;

End;

implementation

{ TDriver }

//========================================================================
=====
constructor TDriver.Create(sName, sCountry, sTeam,sTime: string);
begin
  fName:=sName;
  fCountry:=sCountry;
  fTeam:=sTeam;
  fTime:=sTime;
end;
//========================================================================
=======
function TDriver.getAverage: string;
 Var
   sAverage,aTime:real;
begin
  aTime:=3600*
strtoint(copy(fTime,1,1))+60*strtoint(copy(fTime,3,2))+strtofloat(copy(fTi
me,6,6));
  sAverage:=(58*5.95*1000)/aTime;
  Result:='The Average speed of '+fName+ ' is '+floattostr(sAverage)
+'m/s';
end;

//========================================================================
=====
function TDriver.getfName: string;
Var
cpos:integer;
begin
 cpos:=pos(' ',fName);
 Result:=copy(fName,1,cpos-1);

Copyright reserved                                                  Please turn over

### Page 11

Downloaded from hlayiso.com
(SEPTEMBER 2014)          INFORMATION TECHNOLOGY P1                            11

end;

//========================================================================
=======
function TDriver.toString: string;
var
shrs, smins:integer;
sseconds:real;
begin
  shrs:=strtoint(copy(fTime,1,1));
  smins:=strtoint(copy(fTime,3,2));
  sseconds:=strtofloat(copy(fTime,6,6));
result :=fName
+#9+fCountry+#9+fTeam+#9+inttostr(shrs)+':'+inttostr(smins)+'":'+floattost
r(sseconds);
end;

end.

Copyright reserved                                                  Please turn over

### Page 12

Downloaded from hlayiso.com
12                        INFORMATION TECHNOLOGY P1               (SEPTEMBER 2014)

Main Form
unit Q2_aurgp;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls,
Forms,
  Dialogs, StdCtrls, ComCtrls, Buttons, clsDriver, Grids, DBGrids, Datam;

type
  TfrmAustralia = class(TForm)
    btnDisplay: TButton;
    btnResults: TButton;
    BitBtn1: TBitBtn;
    DBGrid1: TDBGrid;
    btnNavigate: TButton;
    btnSave: TButton;
    procedure btnDisplayClick(Sender: TObject);
    procedure btnResultsClick(Sender: TObject);

    procedure btnNavigateClick(Sender: TObject);
    procedure btnSaveClick(Sender: TObject);
  private
    { Private declarations }
  public
    { Public declarations }

  end;

var
  frmAustralia: TfrmAustralia;
implementation

uses Q2_aurgpunit, Q2_aurgp3unit;

{$R *.dfm}

//========================================================================
======
procedure TfrmAustralia.btnDisplayClick(Sender: TObject);
 begin
AUDatam.ADOTaugp3.Active:=True;

end;

//========================================================================
======
procedure TfrmAustralia.btnResultsClick(Sender: TObject);
begin
Q2_aurgp2.Showmodal;
end;

procedure TfrmAustralia.btnSaveClick(Sender: TObject);
var
myFile:textfile;
DrvID , Name, Country : String;
iTotal : Integer;
begin
  AssignFile(myFile,'Divers.txt');
  Rewrite(myFile);

Copyright reserved                                                  Please turn over

### Page 13

Downloaded from hlayiso.com
(SEPTEMBER 2014)          INFORMATION TECHNOLOGY P1                            13

  Writeln(myFile,'DRIVERS AND THEIR COUNTRIES':50);
  Writeln(myFile,'===============================':50);
  Writeln(myFile,'');
  Writeln(myFile,'DriverID':20, 'Name and Surname':30, 'Country':20);
  Writeln(myFile,'------':20,'----------------':30,'---------------':20);
  Writeln(myFile,'');
     AUDatam.ADOTaugp3.Open;
     AUDatam.ADOTaugp3.First;
      while not AUDatam.ADOTaugp3.Eof do
        begin
         DrvID:=AUDatam.ADOTaugp3['DRID'];
         Name:= AUDatam.ADOTaugp3['Name'];
         Country:= AUDatam.ADOTaugp3['Country'];
         if Driver.Country <>'Great Britain' then
          Writeln(myFile,Driver.Getname +#9+Driver.getcountry);
         AUDatam.ADOTaugp3.Next;
        end;
    CloseFile(myFile);

end;

//========================================================================
======
procedure TfrmAustralia.btnNavigateClick(Sender: TObject);
begin
Q2_aurgp3.Showmodal;
end;

//========================================================================
======

end.

Copyright reserved                                                  Please turn over

### Page 14

Downloaded from hlayiso.com
14                         INFORMATION TECHNOLOGY P1              (SEPTEMBER 2014)

Form2// Button Display Race Results
unit Q2_aurgpunit;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls,
Forms,
  Dialogs, StdCtrls, Buttons,Datam, Grids, DBGrids,clsDriver;

type
  TQ2_aurgp2 = class(TForm)
    BitBtn1: TBitBtn;
    DBGrid1: TDBGrid;
    btnWinner: TButton;
    procedure FormActivate(Sender: TObject);
    procedure btnWinnerClick(Sender: TObject);
  private
    { Private declarations }
  public
    { Public declarations }
  end;

var
  Q2_aurgp2: TQ2_aurgp2;
  Winner:Tdriver;

implementation

{$R *.dfm}

procedure TQ2_aurgp2.btnWinnerClick(Sender: TObject);
begin

       AUDatam.ADOTaugp3.Open;
       AUDatam.ADOTaugp3.First;
       Winner:=Tdriver.Create(AUDatam.ADOTaugp3['Name'],
       AUDatam.ADOTaugp3['Country'],
       AUDatam.ADOTaugp3['Team'],
       AUDatam.ADOTaugp3['Time']);
       showmessage(Winner.toString);

end;

procedure TQ2_aurgp2.FormActivate(Sender: TObject);
begin
   AUDatam.ADOTaugp3.Active:=True;
   AUDatam.ADOTaugp3.Sort:='Time';
end;

end.

Copyright reserved                                                  Please turn over

### Page 15

Downloaded from hlayiso.com
(SEPTEMBER 2014)           INFORMATION TECHNOLOGY P1                           15

Form 3// Button Navigate
unit Q2_aurgp3unit;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls,
Forms,
  Dialogs,Datam, ExtCtrls, DBCtrls, StdCtrls, Mask, Buttons, clsDriver;

type
  TQ2_aurgp3 = class(TForm)
    DBNavigator1: TDBNavigator;
    Label1: TLabel;
    DBEdit1: TDBEdit;
    Label2: TLabel;
    DBEdit2: TDBEdit;
    Label3: TLabel;
    DBEdit3: TDBEdit;
    Label4: TLabel;
    DBEdit4: TDBEdit;
    Label5: TLabel;
    DBEdit5: TDBEdit;
    BitBtn1: TBitBtn;
    lblAverage: TLabel;
    lblavgdisp: TLabel;
    procedure FormActivate(Sender: TObject);
    procedure DBNavigator1Click(Sender: TObject; Button: TNavigateBtn);
  private
    { Private declarations }
  public
    { Public declarations }
  end;

var
  Q2_aurgp3: TQ2_aurgp3;
  Mdriver:Tdriver;

implementation

{$R *.dfm}

procedure TQ2_aurgp3.DBNavigator1Click(Sender: TObject; Button:
TNavigateBtn);
begin
   if ((Button = nbFirst) or (Button = nbNext)
      or (Button = nbPrior) or (Button = nbLast)) then
    begin
       Mdriver:=Tdriver.Create(DBedit2.Text,
       DBEdit3.Text,
       DBEdit4.Text,
       DBEdit5.Text);
       lblavgdisp.Caption:=Mdriver.getAverage;
    end;
end;

procedure TQ2_aurgp3.FormActivate(Sender: TObject);
begin
   AUDatam.ADOTaugp3.Active:=True;
end;

end.

Copyright reserved                                                  Please turn over

### Page 16

Downloaded from hlayiso.com
16                             INFORMATION TECHNOLOGY P1                (SEPTEMBER 2014)

QUESTION 3: DELPHI PROGRAMMING

Mark allocation

                                 Question 3 - Marking Grid
                                                                        Max.    Learner’s
 Q                                   Aspect                             mark     marks
3.1    Introduce a counter to count the number of entries in the file    s
       k:=0; 
       Check to see if file exists and exit if it does not exist
       if FileExists('abrivs.txt')<> true then
          Begin
            ShowMessage('File Does not exist');
          Exit; 
          End;
       Assign and reset file
          AssignFile(Myfile,'abrivs.txt' ); 
          Reset(Myfile);                                                10
       Start a Loop
         While Not EOF(Myfile) do
         inc(k); 
       Read line by line
       Readln( Myfile, SOneline); 
       Enter correct values into array
       ArrAbrevs[1,k]:=copy(SOneline,1,3); 

       ArrAbrevs[2,k]:=copy(SOneline,5,length(SOneline)); 

3.2    Loop to Display in Richedit
       For z:=1 to k do
             Begin
       Display correctly
             redAbrevs.Lines.add(ArrAbrevs[1,z]+'              '+
       ArrAbrevs[2,z]); 
           end;
       Nested loop to display positions in stringgrid
          For i:=1 to 12 do
           begin
              For j:=1 to 10 do
                 begin
                                                                         8
       ArrPositions displayed correctly
       strgdPositions.Cells[j,i]:=ArrPositions[j,i];
                end; 
          end;
       Loop to display circuits and numbers
         For i:=1 to 10 do
          Begin

       Circuits and Positions displayed correctly
            strgdPositions.Cells[0,i]:= arrCircuits[i]; 
            strgdPositions.Cells[i,0]:= inttostr(i);
          End; 

Copyright reserved                                                       Please turn over

### Page 17

Downloaded from hlayiso.com
(SEPTEMBER 2014)               INFORMATION TECHNOLOGY P1                             17

3.3    Variable to count number of podium appearances to be initialised
       nump:=0; 
       Use inputbox correctly to get values
       iAbrev:=UpperCase(Inputbox('Driver Podium
       Search','Enter Abbreviations of Driver here',''));
       
       Start loop to search abbreviation
         For i:=1 to 25 do
                   Begin
       Link Abbreviation to Name
                     if ArrAbrevs[1,i]=iAbrev then
                        iName:=ArrAbrevs[2,i]; 
                   End;
       Search podium positions on stringgrid
       for i := 1 to 10 do                                               13
          Begin
            For j:=1 to 3 do
               Begin
                 if strgdPositions.Cells[j,i]=iAbrev then
                    inc(nump); 
               End;
          End;
          if nump>0 then
       Display Podium podium positions using a message box
       ShowMessage(iName+' has been on the podium
       '+inttostr(nump)+' times so far') 
         ElseShowMessage(iName+' has not been on the
       podium so far') 

3.4    Use of Input box correct to get Abbreviation
       iAbrev:=UpperCase(Inputbox('Points
       Calculator','Enter Abbreviations of Driver
       here','')); 
       Start loop to count
       for j := 1 to 10 do
         Begin
           for i:= 1 to 10 do
             if strgdPositions.Cells[i,j]= iAbrev then
       Correct use of Case statement or If Statement
                     Begin
                       Case i of
                         1:iPoint:=25;                                    10
                         2:iPoint:=18;
                         3:iPoint:=15;
                         4:iPoint:=12;
                         5:iPoint:=10; 
                         6:iPoint:=8; 
                         7:iPoint:=6;
                         8:iPoint:=4;
                         9:iPoint:=2;
                         10:iPoint:=1
                         Else
                         iPoint:=0; 
                       End;
Copyright reserved                                                        Please turn over

### Page 18

Downloaded from hlayiso.com
18                          INFORMATION TECHNOLOGY P1        (SEPTEMBER 2014)

                     End;
       Add Total
             iTotal:=iTotal+iPoint; 
          End;
       Link Name to Abbreviation
                For i:=1 to 25 do
                Begin
                  if ArrAbrevs[1,i]=iAbrev then
                     iName:=ArrAbrevs[2,i]; 
                End;
       Display Points
          ShowMessage(iName+' has     '+inttostr(iTotal)+'
       points so far'); 
       end;
                                                             [41]

Copyright reserved                                            Please turn over

### Page 19

Downloaded from hlayiso.com
(SEPTEMBER 2014)          INFORMATION TECHNOLOGY P1                       19

SAMPLE: DELPHI SOLUTION QUESTION 3

unit Results;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics,
Controls, Forms,
  Dialogs, Menus, StdCtrls, ComCtrls, Grids;

type
  TfrmSummaries = class(TForm)
     MainMenu1: TMainMenu;
     sRATRT1: TMenuItem;
     Load: TMenuItem;
     Display: TMenuItem;
     Podium: TMenuItem;
     Points: TMenuItem;
     redAbrevs: TRichEdit;
     strgdPositions: TStringGrid;
     Exit1: TMenuItem;
     Label1: TLabel;
     procedure LoadClick(Sender: TObject);
     procedure DisplayClick(Sender: TObject);
     procedure PodiumClick(Sender: TObject);
     procedure PointsClick(Sender: TObject);
     procedure Exit1Click(Sender: TObject);
     procedure FormCreate(Sender: TObject);
  private
     { Private declarations }
  public
     { Public declarations }
  end;

var
  frmSummaries: TfrmSummaries;
  ArrAbrevs:Array[1..2,1..25] of string;
  ArrPositions:Array[1..10,1..15] of string =(('VET', 'VET', 'HAM',
'ROS', 'ROS', 'ROS', 'VET', 'HAM', 'HAM', 'HAM', 'HAM', 'VET', '',
'', ''),
  ('WEB', 'MAS', 'RAI', 'VET', 'HAM', 'HAM', 'HAM', 'ROS', 'VET',
'VET', 'VET', 'WEB', '', '', ''),
    ('HAM', 'ALO', 'ALO', 'ALO', 'VET', 'VET', 'BOT', 'VET', 'WEB',
'GRO', 'WEB', 'HUL', '', '', ''),
     ('MAS', 'HAM', 'ROS', 'MAS', 'RAI', 'WEB', 'ROS', 'WEB', 'RAI',
'ROS', 'ROS', 'MAS', '', '', ''),
      ('ALO', 'WEB', 'MAS', 'DIR', 'ALO', 'RAI', 'WEB', 'RIC',
'GRO', 'ALO', 'DIR', 'ALO', '', '', ''),
       ('ROS', 'ROS', 'GRO', 'SUT', 'GRO', 'ALO', 'ALO', 'SUT',
'RIC', 'RAI', 'BUT', 'ROS', '', '', ''),
        ('RAI', 'BUT', 'RIC', 'WEB', 'WEB', 'PER', 'VER', 'GRO',
'MAS', 'MAS', 'GRO', 'RIC', '', '', ''),
         ('GRO', 'SUT', 'BUT', 'RAI', 'PER', 'SUT', 'SUT', 'RAI',
'ALO', 'RIC', 'RAI', 'PER', '', '', ''),
          ('DIR', 'PER', 'VET', 'HAM', 'MAS', 'BUT', 'HUL', 'ALO',
'BUT', 'PER', 'ALO', 'BUT', '', '', ''),
           ('BUT', 'RAI', 'HUL', 'BUT', 'DIR', 'VER', 'RAI', 'BUT',
Copyright reserved                                             Please turn over

### Page 20

Downloaded from hlayiso.com
20                        INFORMATION TECHNOLOGY P1         (SEPTEMBER 2014)

'HUL', 'WEB', 'MAS', 'VER', '', '', ''));
  ArrCircuits: Array[1..12] of string = ('Rolex Australian Grand
Prix','Petronas Malaysia Grand Prix','UBS Chinese Grand Prix','Gulf
Air Bahrain Grand Prix','57° Gran Premio de España','71e Grand Prix
de Monaco','Grand Prix du Canada','Santander British Grand
Prix','Grosser Preis Santander von Deutschland','Magyar
Nagydíj','Shell Belgian Grand Prix','84° Gran Premio dItalia');
  k:integer;

implementation

{$R *.dfm}

//=================================================================
=============
procedure TfrmSummaries.Exit1Click(Sender: TObject);
begin
Application.Terminate;
end;
 procedure TfrmSummaries.FormCreate(Sender: TObject);
begin
 strgdPositions.ColWidths[0]:=220;
end;

//3.1==============================================================
===============
procedure TfrmSummaries.LoadClick(Sender: TObject);
Var
  Myfile:TextFile;
  i:integer;
  SOneline:string;
begin
k:=0;
if FileExists('abrivs.txt')<> true then
  Begin
    ShowMessage('File Does not exist');
  Exit;
  End;
  AssignFile(Myfile,'abrivs.txt' );
  Reset(Myfile);
 While Not EOF(Myfile) do
      Begin
       inc(k);
       Readln( Myfile, SOneline);
       ArrAbrevs[1,k]:=copy(SOneline,1,3);
       ArrAbrevs[2,k]:=copy(SOneline,5,length(SOneline));

       End;

End;

//3.2==============================================================
================

Copyright reserved                                            Please turn over

### Page 21

Downloaded from hlayiso.com
(SEPTEMBER 2014)          INFORMATION TECHNOLOGY P1                      21

procedure TfrmSummaries.DisplayClick(Sender: TObject);
  Var
    z,i,j:integer;
begin
  For z:=1 to k do
    begin
      redAbrevs.Lines.add(ArrAbrevs[1,z]+' '+ ArrAbrevs[2,z]);
    end;

   For i:=1 to 12 do
   begin
       For j:=1 to 10 do
          begin
             strgdPositions.Cells[j,i]:=ArrPositions[j,i];
          end;
   end;
  For i:=1 to 10 do
  Begin
    strgdPositions.Cells[0,i]:= arrCircuits[i];
    strgdPositions.Cells[i,0]:= inttostr(i);
  End;

end;

//3.3==============================================================
================
procedure TfrmSummaries.PodiumClick(Sender: TObject);
  Var
    i,j,nump:integer;
    iAbrev,iName:string;
begin
nump:=0;
iAbrev:=UpperCase(Inputbox('Driver Podium Search','Enter
Abbreviations of Driver here',''));

  For i:=1 to 25 do
      Begin
        if ArrAbrevs[1,i]=iAbrev then
           iName:=ArrAbrevs[2,i];
      End;

for i := 1 to 10 do
  Begin
    For j:=1 to 3 do
       Begin
         if strgdPositions.Cells[j,i]=iAbrev then
            inc(nump);
       End;
  End;

  if nump>0 then

  ShowMessage(iName+' has been on the podium '+inttostr(nump)+'
times so far')

Copyright reserved                                            Please turn over

### Page 22

Downloaded from hlayiso.com
22                        INFORMATION TECHNOLOGY P1             (SEPTEMBER 2014)

  Else
  ShowMessage(iName+' has not been on the podium so far')

end;
//3.4==============================================================
================
procedure TfrmSummaries.PointsClick(Sender: TObject);
  Var
  i,j,iPoint,iTotal:integer;
  iName,iAbrev:string;

begin

 iAbrev:=UpperCase(Inputbox('Points Calculator','Enter
Abbreviations of Driver here',''));
 for j := 1 to 10 do
  Begin
    for i:= 1 to 10 do
      if strgdPositions.Cells[i,j]= iAbrev then
        Begin
          Case i of
             1:iPoint:=25;
             2:iPoint:=18;
             3:iPoint:=15;
             4:iPoint:=12;
             5:iPoint:=10;
             6:iPoint:=8;
             7:iPoint:=6;
             8:iPoint:=4;
             9:iPoint:=2;
             10:iPoint:=1
             Else
             iPoint:=0;
          End;
        End;

     iTotal:=iTotal+iPoint;
  End;
       For i:=1 to 25 do
       Begin
         if ArrAbrevs[1,i]=iAbrev then
            iName:=ArrAbrevs[2,i];
       End;
   ShowMessage(iName+' has '+inttostr(iTotal)+'       points so far');
end;

end.

                                                                 TOTAL:       150

Copyright reserved                                                Please turn over

## Related documents

- [INFT P1 GR12 SEPT2014 MEMO AFR](https://www.hlayiso.com/library/inft-p1-gr12-sept2014-memo-afr/4be11126-3cdb-4383-b442-678952a4e97e) — Information Technology · Memo · 2014 · Afr
- [Information Technology P1 Nov 2014 Memo Eng](https://www.hlayiso.com/library/information-technology-p1-nov-2014-memo-eng/5ce60bf6-fbc5-4741-8abb-86a179de07b7) — Information Technology · Memo · 2014 · Eng
- [Information Technology P1 Nov 2014 Memo Afr](https://www.hlayiso.com/library/information-technology-p1-nov-2014-memo-afr/f95a8905-970c-4975-bcc9-bb42cd12abbc) — Information Technology · Memo · 2014 · Afr
- [IT P1 GR12 MEMO SEPT 2022 Afrikaans](https://www.hlayiso.com/library/it-p1-gr12-memo-sept-2022-afrikaans/43cd69be-f0ac-46f4-9d4c-b2503fe09125) — Information Technology · Memo · 2022 · Afr
- [IT P1 GR12 MEMO SEPT 2022 English](https://www.hlayiso.com/library/it-p1-gr12-memo-sept-2022-english/6e7cbe6a-69aa-4c7d-bcd4-dcfeaf4c8272) — Information Technology · Memo · 2022 · Eng
- [INFO TECH P1 GR12 MEMO SEPT2021 ENG D](https://www.hlayiso.com/library/info-tech-p1-gr12-memo-sept2021-eng-d/ff05fb64-9f3d-4fe4-bb3d-3fe016928d51) — Information Technology · Memo · 2021 · Eng

## More from Grade 12 Information Technology

- [IT-P2-GR12 QP-Afr-SEP-2025 watermark](https://www.hlayiso.com/library/it-p2-gr12-qp-afr-sep-2025-watermark/569cc299-ae7c-4635-9514-cf03f9242ebc) — QP · 2025 · Afr
- [IT P2 QP GR12 SEPT 2024 AFR](https://www.hlayiso.com/library/it-p2-qp-gr12-sept-2024-afr/9016098b-e233-49f4-b1dc-f0838363c6af) — QP · 2024 · Afr
- [IT P2 QP GR12 SEPT 2024 English](https://www.hlayiso.com/library/it-p2-qp-gr12-sept-2024-english/83309154-2856-47f1-82cc-cc04c8ab38b1) — QP · 2024 · Eng
- [Information Technology P1 Nov 2024 Afr](https://www.hlayiso.com/library/information-technology-p1-nov-2024-afr/f4b19c44-77ce-482a-9f85-438813c25f87) — QP · 2024 · Afr
- [Information Technology P2 Nov 2024 Eng](https://www.hlayiso.com/library/information-technology-p2-nov-2024-eng/3afa20d1-1c0f-4969-8a56-d690e9b24d70) — QP · 2024 · Eng
- [Information Technology P1 May-June 2023 MG Eng](https://www.hlayiso.com/library/information-technology-p1-may-june-2023-mg-eng/f868554b-8f4f-4370-aa4e-cfa745fc806d) — Memo · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
