# Information Technology Grade 12 P1 Eastern Cape Mock 2021 QP

> Grade 12 Information Technology Paper 1 question paper from the Eastern Cape Mock Exam 2021 (English), 19 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/it-p1-gr12-qp-sept-2021-eng/6e66bdc6-8141-4ae4-b644-0341865f3911
- Updated: 2026-09-27
- Subject: Information Technology
- Grade: Grade 12
- Document type: Question paper
- Year: 2021
- Exam period: Eastern Cape Mock Exam
- Paper: 1
- Curriculum: CAPS
- Pages: 19

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Information Technology](https://www.hlayiso.com/library/grade-12/information-technology) › [Information Technology Grade 12 P1 Eastern Cape Mock 2021 QP](https://www.hlayiso.com/library/it-p1-gr12-qp-sept-2021-eng/6e66bdc6-8141-4ae4-b644-0341865f3911)

## About this document

Information Technology · Grade 12 · Eastern Cape Mock Exam · 2021. Question paper, 19 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                        NATIONAL
                   SENIOR CERTIFICATE

                            GRADE 12

                    SEPTEMBER 2021

           INFORMATION TECHNOLOGY P1

MARKS:   150

TIME:    3 hours

                    This question paper consists of 19 pages.

### Page 2

Downloaded from hlayiso.com
2                            INFORMATION TECHNOLOGY P1                     (EC/SEPTEMBER 2021)

 INSTRUCTIONS AND INFORMATION

 1.    This question paper is divided into FOUR sections. Candidates must answer
       ALL the questions in ALL FOUR sections.

 2.    The duration of this examination is three hours. Because of the nature of this
       examination it is important to note that you will not be permitted to leave the
       examination room before the end of the examination session.

 3.    This question paper is set with programming terms that are specific to Delphi
       programming language.

 4.    Make sure that you answer the questions according to the specifications that are
       given in each question. Marks will be awarded according to the set
       requirements.

 5.    Answer only what is asked in each question. For example, if the question does
       not ask for data validation, then no marks will be awarded for data validation.

 6.    Your programs must be coded in such a way that they will work with any data
       and not just the sample data supplied or any data extracts that appear in the
       question paper.

 7.    Routines, such as locate, search, sort and selection, must be developed from
       first principles. You may NOT use the built-in features of Delphi for any of these
       routines.

 8.    All data structures must be defined by you, the programmer, unless the data
       structures are supplied.

 9.    You must save your work regularly on the disk/CD/DVD/flash disk you have
       been given, or on the disk space allocated to you for this examination session.

 10.   Make sure that your name appears as a comment in every program that you
       code, as well as on every event indicated.

 11.   If required, print the programming code of all the programs/classes that you
       completed. You will be given half an hour printing time after the examination
       session.

 12.   At the end of this examination session you must hand in a disk/CD/DVD/ flash
       disk with all your work saved on it OR you must make sure that all your work
       has been saved on the disk space allocated to you for this examination session.
       Make sure that all files can be read.

Copyright reserved                                                            Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)              INFORMATION TECHNOLOGY P1                                3

 13.   The files that you need to complete this question paper have been given to you
       on the disk/CD/DVD/flash disk or on the disk space allocated to you. The files
       are provided in the form of password-protected executable files.

       Do the following:

        •   Double click on the password-protected executable file.
        •   Click on the extract button.
        •   Enter the following password: gR12#21sEpt

       Once extracted, the following list of files will be available in the folder
       DataSept2021:

       Question 1:

       Question1_u.pas
       Question1_u.dfm
       Question1_p.dpr
       Question1_p.res
       rain.jpg

       Question 2:

       dbConnection_u.pas
       Birds.mdb
       BirdsBackup.mdb
       Question2_u.pas
       Question2_u.dfm
       Question2_p.dpr
       Question2_p.res

       Question 3:

       Question3ClassDefinition.pas
       Question3_u.pas
       Question3_u.dfm
       Question3_p.dpr
       Question3_p.res

       Question 4:

       water.txt
       Question4_u.pas
       Question4_u.dfm
       Question4_p.dpr
       Question4_p.res

Copyright reserved                                                          Please turn over

### Page 4

Downloaded from hlayiso.com
4                             INFORMATION TECHNOLOGY P1                     (EC/SEPTEMBER 2021)

 QUESTION 1: GENERAL PROGRAMMING SKILLS

 Do the following:
 • Open the incomplete program in the Question 1 folder.
 • Enter your full name as a comment in the first line of the Question1_u.pas file.
 • Compile and execute the program. The program has no functionality currently.
 • Follow the instructions below to complete the code for each section of
   QUESTION 1, as described in QUESTION 1.1, QUESTION 1.2, QUESTION 1.3
   and QUESTION 1.4.

 Your school has created a club to provide information and conduct research on
 water supply and rainfall issues. Complete the program for the club by using the
 instructions below.

 1.1   Button [1.1 Display]

       Write code to do the following:

       Load the image named rain.jpg into the image component named imgRain.
       Enable the panel named pnlBath.
       Change the background colour of the panel, named pnlRain, to aqua.                   (3)

 1.2   Button [1.2 Process]

       Rainfall calculator.
       How many 150 litre baths can be filled after rainfall has occurred over a certain
       area in your garden or on your roof?

       Write code to do the following:

       The user will enter the height and width in the spinedits named sedWidth and
       sedHeight and choose the number of millimetres from the combobox named
       cmbRain.

       The number of 150 litre baths will be equal to the number of square meters
       multiplied by the amount of water in millimetres and divided by 150. Round the
       answer to 1 decimal place.

       Example: An area of 20 m by 35 m receives 1/2 millimetre (0.5 mm) of rain.
                20 x 35 x 0.5 /150 = 2.3 baths (150 litres each)

       Use the following data to test your solution:

                 Rainfall     Height in         Width in      Number of 150
                 in mm         Metres           Metres          litre baths
                   15            9                10                  9
                  1/10           20               20                 0.3
                   1/2           20               35                 2.3
                   30            9                12                 22

Copyright reserved                                                             Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)               INFORMATION TECHNOLOGY P1                                    5

       Example of output:

                                                                                              (11)

 1.3   Button [1.3 Find rainfall type]
       We wish to find out what type of rainfall occurred in our area.
       The following descriptions apply for different amounts of rain that falls in 1 hour.
       No rain: Less than 1 mm per hour
       Moderate rain: Greater than or equal to 1 mm per hour, but less than 4 mm per
       hour.
       Heavy rain: Greater than or equal to 4 mm per hour, but less than 8 mm per
       hour.
       Very heavy rain: Greater than or equal to 8 mm per hour but less than 10 mm
       per hour.
       Heavy shower: Greater than or equal to 10 mm per hour, but less than or equal
       to 50 mm per hour.
       Flood: Greater than 50 mm per hour.
       Write code in this button onclick event to determine the type of rainfall that
       occurred. The user will enter the amount of rain in millimetres per hour in the
       edit box named edtRain and then the program must calculate and display, in
       the label named lblRainfallType, the description of the type of rainfall as
       described above.
       You must also write code to test if an integer has been entered into the edit
       box named edtRain. If the input is not an integer an error message must be
       displayed, and the procedure must exit.

       Examples of output:

                                                                                              (13)

Copyright reserved                                                               Please turn over

### Page 6

Downloaded from hlayiso.com
6                             INFORMATION TECHNOLOGY P1                      (EC/SEPTEMBER 2021)

 1.4   Button [1.4 Display Rainfall]

       You are required to calculate and display how many times either 5 mm or
       10 mm of rainfall was recorded in 8 different areas.

       Write code to repeat the following instructions 8 times:
       • Generate 2 different random numbers between 5 and 10 (both included).
       • If the random numbers are either 5 or 10, then add 1 to the quantity in the
         list box named LstQuantity on the correct line that matches the position of
         either 5 mm or 10 mm as indicated in the list box named LstRain.
       • Calculate the sum of the two quantities and display it on the third line of the
         list box named LstQuantity.
         For example: 1 + 2 = 3 and 15 + 10 = 25
       • Change the heights of the shapes named shp5mm and shp10mm by
         adding the values of the corresponding numbers in LstQuantity to the
         current height of each shape.

       Example of output after 1 execution of the button onclick event showing that 1
       area experienced 5 mm of rainfall and 2 areas experienced 10 mm of rainfall:

       Example of output after more than one execution of the button onclick event:

                                                                                             (13)

       •    Enter your name and surname as a comment in the first line of the
            program file.
       •    Save your program.
       •    A printout of the code may be required.                                          [40]

Copyright reserved                                                              Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)                 INFORMATION TECHNOLOGY P1                                  7

 QUESTION 2: DATABASE PROGRAMMING

 The database Birds.mdb contains the details of birds and the status of birds in South
 Africa. The database contains two tables, namely Bird and Status.

 Table: Status
 This table contains the descriptions of the possible status of a bird.

  Field name           Data type               Description
  StatusID             Number                  A unique number assigned to each status
  StatusName           Text (50)               The description of the Status of a bird

 Example of data in the Status table:

 Table: Bird
 This table contains information of birds and their sightings in South Africa.

  Field name           Data type           Description
  BirdID               Number              A unique number assigned to a bird
  Birdname             Text (50)           The common name of a bird
  Vagrant              Yes/No              Bird wanders beyond the limits of their natural
                                           range — can turn up almost anywhere
  Sightings            Number              Total number of sightings of a bird
  Lastsighted          Date (short date)   Date that the bird was last seen
  StatusID             Number              Foreign key to connect to the Bird table

 Example of data of the first fourteen records of the Bird table:

Copyright reserved                                                               Please turn over

### Page 8

Downloaded from hlayiso.com
8                            INFORMATION TECHNOLOGY P1                   (EC/SEPTEMBER 2021)

 The relationship between the two tables is shown below:

 Do the following:
 • Open the incomplete project file called Question2_p.dpr in the Question 2 folder.
 • Enter your name as a comment in the first line of the Question2_u.pas unit file.
 • Compile and execute the program. The program has no functionality currently.

 The user interface is displayed below:

    • Follow instructions to complete the code for each question, as described in
      QUESTION 2.1 and QUESTION 2.2.
    • Use SQL code to answer QUESTION 2.1 and Delphi code to answer
      QUESTION 2.2.

 NOTE:
 • The [Restore Database] button is provided to restore your data contained in the
   database to the original content. If you need to test your code on the original
   data, you may click this button to restore data.
 • Do NOT change any of the code provided.
 • Code is provided to link the GUI components to the database.
 • TWO variables are declared as global variables, as described in the table below.
 • Use tblStatus and tblBird components in Question 2.2 only.

Copyright reserved                                                          Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)               INFORMATION TECHNOLOGY P1                                9

        Variable           Data type           Description
        tblStatus          TADOTable           Refers to the table named Status
        tblBird            TADOTable           Refers to the table named Bird

 2.1 In this section you may ONLY use SQL statements to answer QUESTION
     2.1.1 to QUESTION 2.1.5.

       Code to execute the SQL statements and display the results of the queries is
       provided. The SQL statements are incomplete.

       Do the following to complete the incomplete SQL statements assigned to the
       variables sSQL1, sSQL2, sSQL3, sSQL4 and sSQL5 per question respectively.

       2.1.1    Button [2.1.1]

                Write SQL code to display all Status details sorted in reverse
                alphabetical order of StatusName.

                Example of output:

                                                                                         (3)

       2.1.2    Button [2.1.2]

                Write SQL code to display the BirdName of all birds that have had less
                than 200 Sightings.

                Example of output:

                                                                                         (3)

Copyright reserved                                                           Please turn over

### Page 10

Downloaded from hlayiso.com
10                               INFORMATION TECHNOLOGY P1                (EC/SEPTEMBER 2021)

       2.1.3    Button [2.1.3]

                The user must enter the name of a bird. Code has been provided for
                the bird name “vulture” to be entered in an input box and saved in a
                variable named sline.

                Write SQL code to display the BirdName and LastSighted date of all
                birds that contain the word stored in the variable, sline.

                Example of output:

                                                                                         (4)

       2.1.4    Button [2.1.4]

                Write an SQL code to delete all birds that have not been assessed and
                where the status is listed as ‘Least concern’. The StatusID for ‘Not
                Assessed’ is the number 6 and the StatusID for ‘Least Concern’ is the
                number 5.

                (Code has been written to display the successfully updated table after
                deleting.)

                Example of output of the first 9 records:

                                                                                         (4)

Copyright reserved                                                           Please turn over

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)                INFORMATION TECHNOLOGY P1                               11

       2.1.5    Button [2.1.5]

                Write SQL code to display the StatusName and BirdName of all birds.

                Example of output of the first 8 records:

                                                                                           (3)

       2.1.6    Button [2.1.6]

                Write SQL code to display the average quantity for each StatusID of all
                birds that were LastSighted in the year 2007 using the description
                ‘AverageSightings’. The average must be rounded to 2 decimal places.

                Example of output:

                                                                                           (8)

Copyright reserved                                                            Please turn over

### Page 12

Downloaded from hlayiso.com
12                               INFORMATION TECHNOLOGY P1                (EC/SEPTEMBER 2021)

 2.2 In this section, only Delphi programming code may be used to answer
     QUESTION 2.2.1 and QUESTION 2.2.2.

       Use the global variables, tblStatus and tblBird, provided.

       NO marks will be awarded for SQL statements in QUESTION 2.2.

       2.2.1    Button [2.2.1]

                Write code to display all Birdnames which contain the word ‘EAGLE’ in
                the richedit named redDisplay.

                Example of output:

                                                                                          (6)

       2.2.2    Button [2.2.2]

                All birds that are categorised as vulnerable must be changed to the
                status of endangered.

                Write code to change the StatusID to 2 of all birds that have a
                StatusID of 3.

                Count how many changes have been made and display the result in
                the richedit named redDisplay.

                Example of output:

                                                                                          (9)

                •    Enter your name and surname as a comment in the first line of the
                     program file.
                •    Save your program.
                •    A printout of the code may be required.                             [40]

Copyright reserved                                                           Please turn over

### Page 13

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)               INFORMATION TECHNOLOGY P1                                 13

 QUESTION 3: OBJECT-ORIENTED PROGRAMMING

 Birding is defined as a recreational activity by people called birders to identify and
 observe wild birds in their natural habitat. There are many wild birds that can be
 sighted by birders in various biological communities in the Eastern Cape.

 Do the following:
 • Open the incomplete program in the Question 3 folder.
 • Open the incomplete object class Question3ClassDefinition.pas.
 • Enter your name as a comment in both Question3ClassDefinition.pas.and
   Question3_u.pas.
 • Compile and execute the program. Currently the program has no functionality.
 • Do NOT remove or change any provided code.

 The following user interface is displayed:

 Complete the code for this program, as specified in QUESTION 3.1 and
 QUESTION 3.2.

 3.1 The incomplete class (Tsighting) contains the declaration of five attributes that
     describe the objBirder object.

       NAMES OF ATTRIBUTES          DESCRIPTION
       fName                        The name of the person who is a birder
                                    The name of the area where the bird was first
       fArea
                                    sighted
       fBird                        The name of the bird that was sighted
       fDate                        The date that the first sighting of the bird occurred
       fQuantity                    The total number of sightings so far

       Complete the code in the object class, as described in QUESTION 3.1.1 to
       QUESTION 3.1.5 below.

Copyright reserved                                                             Please turn over

### Page 14

Downloaded from hlayiso.com
14                             INFORMATION TECHNOLOGY P1                     (EC/SEPTEMBER 2021)

       3.1.1    Write code for a constructor method named Create that will receive
                the name of a birder (person doing the bird watching), area, bird and
                date of sighting as parameters.

                Assign these parameter values to the correct attributes and initialise
                the attributes for the quantity of birds sighted to ONE.                       (4)

       3.1.2    Write code for a method named getSightings which returns the
                quantity of bird sightings.                                                    (2)

       3.1.3    Write code for a method named IncreaseQuantity that will receive one
                integer parameter to set the quantity of sightings by adding the
                parameter to the attribute named fQuantity.                                    (4)

       3.1.4    Write code for a method name SightingGap which must calculate the
                number of years that have transpired after the first sighting of a bird
                took place. Use the current date and the attribute named fDate to
                return the number of years as a string with the words ‘years since first
                sighting’ joined to the end of the string.

                Example of output: ‘23 years since first sighting.’                            (7)

       3.1.5    Write code for a method named toString which must return a string.

                The string must contain the attributes of the class joined together in the
                following format:

                <person’s name> first viewed a <bird name>
                <number of years since first sighting> at <area > on <date of first
                sighting>

                Example of output:

                Joseph Mcina first viewed a Cardinal Woodpecker
                11 years since first sighting at Cape Recife on 4/11/2010                      (5)

Copyright reserved                                                               Please turn over

### Page 15

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)               INFORMATION TECHNOLOGY P1                                 15

 3.2 An incomplete unit Question3_u.pas has been provided.

       It contains code for the object class to be accessible and has a global object
       variable, objBirder, already declared.

       Do NOT delete or change any provided code.

       Follow the instructions below to code the solution:

       3.2.1    Button Q3.2.1

                The user will enter a birder’s name, choose a sighting area and bird
                name and enter the date that the bird was first sighted using the
                provided input components named edtBirderName, cmbArea,
                rgpBirds, sedDay, sedMonth and sedYear.

                Write code to do the following:
                • The date must be concatenated by joining the year, month and date
                  in the format ‘Day/Month/Year’. (Example: 23/9/2012)
                • Instantiate the object, objBirder, using the birder’s name, the
                  sighting area, the bird name and the date first sighted.
                • Clear the richedit.

                Use a method of the class to display the birder’s name, the bird
                name, the number of years that have passed since first sighting, the
                area of the sighting and the date of the first sighting.

                Example of output:

                                                                                            (11)

Copyright reserved                                                             Please turn over

### Page 16

Downloaded from hlayiso.com
16                              INFORMATION TECHNOLOGY P1                     (EC/SEPTEMBER 2021)

       3.2.2    Button Q3.2.2

                Write code to receive the input from the spinedit named sedSighting.

                Use the methods of the class to do the following:

                • Increase the quantity of sightings by using the value from the
                  spinedit.

                • Display the words ‘Total sightings so far’, as well as the quantity of
                  sightings in the richedit named redDisplay.

                Example of output if 3 more sightings was added to the quantity:

                                                                                               (5)

                •    Enter your name and surname as a comment in the first line of the
                     program file. (In both the class and the main program that uses the
                     class)
                •    Save your programs.
                •    A printout of the code of both units may be required.                    [38]

Copyright reserved                                                               Please turn over

### Page 17

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)              INFORMATION TECHNOLOGY P1                             17

 QUESTION 4: PROBLEM-SOLVING PROGRAMMING

 Technically, there is no beginning point of the water cycle, but when asked ‘Where
 does the water cycle start?’, people have different answers. A survey was
 conducted with many people who answered this question. You will use the data from
 this survey to perform calculations and display the answers.

 Do the following:
 • Open the incomplete program in the Question 4 folder.
 • Enter your name and surname as a comment in the first line of the
   Question4_u.pas file.
 • Compile and execute the program. Currently the program has no functionality.

 Example of the text file named water.txt:

 Complete the code for each question, QUESTION 4.1 and QUESTION 4.2.

 NOTE:
 • Good programming techniques must be applied in the design and coding of your
   solution.
 • You may NOT change the code provided.

 Given:
 A global array named arrTypes has been declared.
 A global array named arrQty has been declared.
 A global array counter name iCount has been declared.
 A global totalling variable name iSum has been declared.

Copyright reserved                                                        Please turn over

### Page 18

Downloaded from hlayiso.com
18                           INFORMATION TECHNOLOGY P1                     (EC/SEPTEMBER 2021)

 4.1 Button Q4.1

       Write code to do the following:
       • Read lines from the text file named water.txt into the two arrays arrTypes
         and arrQty by separating the type of method and adding it to arrTypes and
         the number of people who chose that method into the array, arrQty.
       • Calculate the total number of people who made a choice and store that into
         the global variable named iSum.
       • Sort the two arrays according to the numbers from low to high in arrQty.
       • Display both arrays in redDisplay into neat columns and display the total
         number of people who took part.

       Example of output:

                                                                                           (19)

 4.2 Button Q4.2

       Write code to calculate the percentage of each quantity in arrQty using the
       global variable iSum. Round the answer to no decimal places.

       Example: percentage = quantity for a type chosen / sum of all choices x 100

       Display the percentages as a symbol for each of four categories.

       The FOUR categories consist of the following:
           Percentages between and equal to 1 and 5.
           Percentages between and equal to 6 and 10.
           Percentages between and equal to 11 and 20.
           Percentages between and equal to 21 and 50.

       Display a symbol (x) in a neat grid to display the range of percentages for each
       type from arrTypes.

Copyright reserved                                                            Please turn over

### Page 19

Downloaded from hlayiso.com
(EC/SEPTEMBER 2021)              INFORMATION TECHNOLOGY P1                              19

       Example of output:

                                                                                        (13)

       •   Enter your name and surname as a comment in the first line of the program
           file.
       •   Save your program.
       •   A printout of the code may be required.                                      [32]

                                                                            TOTAL:      150

Copyright reserved                                                         Please turn over

## Related documents

- [IT P1 GR12 QP SEPT 2021 AFR](https://www.hlayiso.com/library/it-p1-gr12-qp-sept-2021-afr/b59411e5-b38d-41a9-90dd-1921c620ec7d) — Information Technology · QP · 2021 · Afr
- [INFO TECH P1 GR12 MEMO SEPT2021 ENG D](https://www.hlayiso.com/library/info-tech-p1-gr12-memo-sept2021-eng-d/ff05fb64-9f3d-4fe4-bb3d-3fe016928d51) — Information Technology · Memo · 2021 · Eng
- [Information Technology P1 Nov 2021 Eng](https://www.hlayiso.com/library/information-technology-p1-nov-2021-eng/17164583-d33b-4fb5-8673-baf85007b1fc) — Information Technology · QP · 2021 · Eng
- [IT P1 GR12 QP SEPT 2022 Afrikaans](https://www.hlayiso.com/library/it-p1-gr12-qp-sept-2022-afrikaans/f864e03f-add3-41d0-9b55-3110e7180172) — Information Technology · QP · 2022 · Afr
- [INFORMATION TECHNOLOGY P1 GR 12 QP SEPT2020 Afrikaans](https://www.hlayiso.com/library/information-technology-p1-gr-12-qp-sept2020-afrikaans/42a51949-5c87-4fbf-8055-7cc9e3aaa612) — Information Technology · QP · 2020 · Afr
- [INFORMATION TECHNOLOGY P1 GR 12 QP SEPT2020 Afrikaans .docx](https://www.hlayiso.com/library/information-technology-p1-gr-12-qp-sept2020-afrikaans-docx/bcca23dc-b552-4601-9d0b-00117508a14e) — Information Technology · QP · 2020 · Afr

## More from Grade 12 Information Technology

- [Information Technology P1 May-June 2025 MG Eng](https://www.hlayiso.com/library/information-technology-p1-may-june-2025-mg-eng/109c2e1d-bc20-46d3-ac02-c08c05ad9c78) — Memo · 2025 · Eng
- [IT P1 MEMO GR12 SEPT 2024 English](https://www.hlayiso.com/library/it-p1-memo-gr12-sept-2024-english/8994aed2-83ec-413e-b7dc-b0d0b93b82f4) — Memo · 2024 · Eng
- [IT P2 MEMO GR12 SEPT 2024 English](https://www.hlayiso.com/library/it-p2-memo-gr12-sept-2024-english/4d74acb4-cb8b-4fd3-874f-4801fbcb8f44) — Memo · 2024 · Eng
- [IT P1 MEMO GR12 SEPT2023 Afrikaans](https://www.hlayiso.com/library/it-p1-memo-gr12-sept2023-afrikaans/7ffdb7c3-1881-43da-8d8a-96ea3ff87451) — Memo · 2023 · Afr
- [IT P2 GR12 MEMO SEPT2023 Afrikaans](https://www.hlayiso.com/library/it-p2-gr12-memo-sept2023-afrikaans/88ad2758-42f6-43df-a80a-288b5f4cff9f) — Memo · 2023 · Afr
- [IT P2 GR12 MEMO SEPT2023 English](https://www.hlayiso.com/library/it-p2-gr12-memo-sept2023-english/41fa8299-d258-40e9-8c8b-a3ce984eef54) — Memo · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
