# Mechanical Technology Grade 12 Eastern Cape Mock 2023 Memo

> Grade 12 Mechanical Technology memorandum from the Eastern Cape Mock Exam 2023 (English), 12 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Language: English
- Document type: Memorandum
- Year: 2023
- Exam period: Eastern Cape Mock Exam
- Curriculum: CAPS
- Pages: 12

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 Eastern Cape Mock 2023 Memo](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1)

## About this document

Mechanical Technology · Grade 12 · Eastern Cape Mock Exam · 2023 · English. Memorandum, 12 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

NATIONAL
                 SENIOR CERTIFICATE

                           GRADE 12

                     SEPTEMBER 2023

               MECHANICAL TECHNOLOGY:
               WELDING AND METALWORK
                  MARKING GUIDELINE

MARKS:   200

                 This marking guideline consists of 12 pages.

### Page 2

2                MECHANICAL TECHNOLOGY (WELDING AND METALWORK)              (EC/SEPTEMBER 2023)

 QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)

 1.1 C ✓                                                                                  (1)
 1.2 D ✓                                                                                  (1)
 1.3 C ✓                                                                                  (1)
 1.4 C ✓                                                                                  (1)
 1.5 A ✓                                                                                  (1)
 1.6 B ✓                                                                                  (1)
                                                                                          [6]

 QUESTION 2: SAFETY (GENERIC)
 2.1 Arc welding safety precautions:
     • Wear the correct PPE. 
     • Ensure the electrode holder is well insulated. 
     • The environment must be free of water and combustible materials. 
     • Ensure the environment is well ventilated.                 (Any 3 x 1)           (3)
 2.2 Pedestal drilling machine safety precautions:
     • Wear correct PPE. 
     • Make sure all guards are in place. 
     • Clamp the workpiece securely. 
     • Use the correct drill bit. 
     • Do not make any adjustment while the machine is in motion. 
     • Use the correct speed. 
     • Do not remove chips by hand.                               (Any 2 x 1)           (2)
 2.3 Manual guillotine maximum cutting thickness is 1,20 mm                             (1)
 2.4 2.4.1      Advantages of product layout:
                • Handling of material is limited to a minimum. 
                • Time period of manufacturing cycle is less. 
                • Production control is almost automatic. 
                • Greater use of unskilled labour is possible. 
                • Less total inspection is required. 
                • Less total floor space is needed per unit of production. 
                                                                          (Any 2 x 1)    (2)
       2.4.2    Advantages of the process layout:
                • High machine utilisation because more than one product is
                  manufactured. 
                • Better supervision as a result of subdivision of processes. 
                • Less interruption in flow of work when machines become
                  defective. 
                • Lower equipment cost, since one machine can produce more
                  than one product. 
                • Better control of total manufacturing cost. 
                • Greater flexibility in the production process.         (Any 2 x 1)    (2)
                                                                                        [10]

Copyright reserved                                                             Please turn over

### Page 3

(EC/SEPTEMBER 2023)        MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                     3

 QUESTION 3: MATERIALS (GENERIC)

 3.1 Purpose of case hardening:
     • To produce a hard case over  and tough core.                                  (2)

 3.2 Using high carbon steel for case hardening
     • The hardness will penetrate the core. ✓                                         (1)

 3.3 Factors of hardness:
     • Work piece size 
     • Quenching rate 
     • Carbon content                                                                  (3)

 3.4 Types of quenching mediums:
     • Water and salt (brine) 
     • Tap water 
     • Liquid salts 
     • Molten lead 
     • Soluble oil and water 
     • Oil                                                            (Any 3 x 1)      (3)

 3.5 Colour coding of engineering materials:
     • To identify the type of materials as well as the carbon content of steel ✓       (1)

 3.6 Types of tests:

       3.6.1     •    Filing test ✓
                 •    Machining test ✓                                  (Any 1 x 1)     (1)

       3.6.2     •    Sound test ✓
                 •    Spark test ✓                                      (Any 1 x 1)     (1)

       3.6.3     •    Bending test ✓                                                    (1)

 3.7 Machine for spark test:
     • Pedestal grinding machine ✓                                                      (1)
                                                                                       [14]

Copyright reserved                                                           Please turn over

### Page 4

4                MECHANICAL TECHNOLOGY (WELDING AND METALWORK)   (EC/SEPTEMBER 2023)

 VRAAG 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)

 4.1    D 

 4.2    D 

 4.3    C 

 4.4    A 

 4.5    A 

 4.6    D 

 4.7    A 

 4.8    B 

 4.9    A 

 4.10   A 

 4.11   D 

 4.12   B 

 4.13   A 

 4.14   D                                                          (14 x 1)     [14]

Copyright reserved                                                  Please turn over

### Page 5

(EC/SEPTEMBER 2023)         MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                    5

 QUESTION 5: TERMINOLOGY (TEMPLATES) (SPECIFIC)

 5.1    Other side up                                                                      (1)

 5.2    Sketch of roof truss:

                                                                     ✓                (6)

 5.3.   Calculations of steel ring:

        5.3.1        Mean Ꝋ = Outside Ꝋ – plate thickness
                                                     OR
                               Inside Ꝋ + plate thickness
                     Mean Ꝋ = 520 – 42 
                             = 478 mm 
                     Mean Circumference = 𝜋 x mean Ꝋ
                                         = 𝜋 x 478
                                         = 1501,87 mm 
                     Rounded of to 1 502 mm for one ring.                                  (4)

        5.3.2
                                                        Outside
                                                        Diameter 

                                                         Plate thickness 

                                                         Mean diameter 

                                                     Inside diameter 

                                                                                            (4)

 5.4    A – Contour symbol 
        B – Finish symbol grinding 
        C – Length of weld 
        D – Pitch of weld 
        E – Weld all round 
        F – Arrow 
        G – Finish symbol machining 
        H – Tail                                                                          (8)
                                                                                          [23]

Copyright reserved                                                             Please turn over

### Page 6

6                MECHANICAL TECHNOLOGY (WELDING AND METALWORK)          (EC/SEPTEMBER 2023)

 QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC)

 6.1 A – Current adjuster 
     B – Electrode terminal 
     C – Electrode holder 
     D – Electrode 
     E – Arc gap 
     F – Earth terminal 
     G – Earth clamp 
     H – Current scale                                                                  (8)

 6.2 Metal inert gas                                                                    (1)

 6.3 CO2 and Terrell                                                                   (2)

 6.4 The power saw is used to rough-cut large sections of metal  before they are
     further machined or used in manufacturing. It uses a reciprocating movement. 
     The band saw cut in a horizontal position continuously in a forward direction 
     due to the fact that the band is continuously moving in a circular path.           (4)

 6.5 Stock 
     Mixer 
     Nozzle                                                                            (3)
                                                                                       [18]

 QUESTION 7: FORCES (SPECIFIC)

 7.1 7.1.1       Stress
                          𝐿𝑂𝐴𝐷
                 Stress = 𝐴𝑅𝐸𝐴

                             80 x 103
                         =      𝜋𝐷2
                                         
                                 4

                             4 x 80 x 103
                     𝜋𝐷2 =                   
                              30 x 106

                             4 x 80 x 103
                      𝐷2 = 𝜋 x 30 x 106 

                      D = 58,2 mm                                                       (5)

       7.1.2     Strain
                                   𝑆𝑇𝑅𝐸𝑆𝑆
                 Young’s Modulus = 𝑆𝑇𝑅𝐴𝐼𝑁

                                                   𝑆𝑡𝑟𝑒𝑠𝑠
                               Strain = 𝑌𝑜𝑢𝑛𝑔′𝑠 𝑚𝑜𝑑𝑢𝑙𝑢𝑠 

                                             30 x 106
                                         = 90 x 109 

                              Strain = 0,00033                                          (3)

Copyright reserved                                                         Please turn over

### Page 7

(EC/SEPTEMBER 2023)         MECHANICAL TECHNOLOGY (WELDING AND METALWORK)            7

       7.1.3     Change in length
                            Change in length
                 Strain =
                             Original length

                 Change = Strain x Original length 

                            = 0,00033 x 4 

                            = 0,00133 mm                                           (3)

 7.2 7.2.1       Reactions

                 Take reactions RL and RR

                 RR x 10 = (3 x 3) + (10 x 4) + (6 x 7) 

                             = 9 + 40 + 42

                             = 91 

                      RR = 9,1 N 

                 RL x 10 = (6 x 3) + (10 x 6) + (3 x 7) 

                            = 18 + 60 + 21

                            = 99 

                      RL = 9,9 N                                                   (6)

       7.2.2     B𝑀𝐴 : (9,9 x 3) = 29,7 N/m 

                 B𝑀𝐵 : (9,9 x 5) – (3 x 2) = 43,5 N/m 

                 B𝑀𝐶 : (9,9 x 7) – (3 x 4) – (10 x 3) = 27,3 N/m                  (5)

Copyright reserved                                                     Please turn over

### Page 8

8                MECHANICAL TECHNOLOGY (WELDING AND METALWORK)   (EC/SEPTEMBER 2023)

7.3    Framework:

        Member       Strut   Tie   Force
        AE                       15,3 N 
        BG                       11,3 N 
        CH                       12,2 N 
        FG                       6,9 N 
        EF
        DE                       13,25 N 
        DF                       13,25 N 
        DH                       6,2 N 
        GH                       7N

                                                      Guide                    (23)
                                                                               [45]

Copyright reserved                                                  Please turn over

### Page 9

(EC/SEPTEMBER 2023)       MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                        9

QUESTION 8: JOINING METHODS (INSPECTION OF WELDS)

8.1    • The liquid dye penetrant is sprayed onto the clean surface being
         inspected. 
       • Allow a short time for the liquid to penetrate. 
       • Remove the excess dye with a cleaner (solvent). 
       • Wash the surface and allow to dry. 
       • When the surface is dry, spray it with a developer to bring out the colour,
         which was sprayed on and penetrated any cracks or pin holes. 
       • Fluorescent liquids are also used for the surface being inspected. 
       • After a short while, remove the liquid with a cleaner and wait for it to dry. 
       • A black-light source (ultraviolet light) is then brought up to the surface. 
       • Areas where the fluorescent liquid has penetrated will show up under the
         light.                                                               (Any 8 x 1)     (8)

8.2    It refers to a cavity-type formed by gas  during the solidification  of molten
       weld metal.                                                                            (3)

8.3    •   Shape of profile 
       •   Uniformity of surface 
       •   Overlap 
       •   Undercutting
       •   Penetration bead
       •   Root groove                                                        (Any 3 x 1)      (3)

8.4    •   Slag inclusion 
       •   Porosity 
       •   Lack of fusion 
       •   Oxidised or burnt metal                                                (4 x 1)     (4)

8.5    •   Correct flame for the work at hand 
       •   Correct angle of welding torch and welding rod 
       •   Depth penetration and amount of fusion
       •   The rate of progress along the joint                               (Any 2 x 1)      (2)

8.6    •   Good for ferrous and non-ferrous metals 
       •   Low cost 
       •   Easy to apply 
       •   Minimal training required                                          (Any 3 x 1)      (3)
                                                                                              [23]

Copyright reserved                                                               Please turn over

### Page 10

10               MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                (EC/SEPTEMBER 2023)

QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC)

9.1    •   Do not over weld. 
       •   Control the fill up. 
       •   Use intermittent welds. 
       •   Use the smallest leg size for fillet welds. 
       •   Use minimum root opening.
       •   Use minimum included angle.
       •   Select joints that use minimum weld metal.                        (Any 4 x 1)      (4)

9.2    •   Do not over weld. 
       •   Proper preparation is needed. 
       •   Use intermittent welding. 
       •   Use as few passes as possible. 
       •   Place welds near the neutral axis. 
       •   Use back step welding.
       •   Anticipate shrinkage forces.
       •   Plan the welding sequence.
       •   Minimise welding time.                                            (Any 5 x 1)      (5)

9.3    Low carbon steel (0,15–0,30%)  known as mild steel. 
       Medium carbon steel (0,31–0,70%)  known as spring steel. 
       High carbon steel (0,71–1,5%)  known as tool steel.                                  (6)

9.4    It is common in gas metal arc welding  and comprises of droplets of molten
       material  that are generated at or near the welding arc.                            (3)
                                                                                            [18]

QUESTION 10: MAINTENANCE (SPECIFIC)

10.1 To accommodate multiple technicians to do maintenance,  using their own
     locks.                                                                                  (2)

10.2   If excessive loads are applied onto the spindle bearings,  the grinding
       wheel and the grinding machine motor.                                                (2)

10.3   •   The journals and bearings/bushes must be well lubricated. 
       •   Failure to lubricate the components will result in friction and wear of the
           components.                                                                      (2)

10.4   •   To monitor the machine’s condition. 
       •   To assist in upholding warrantees and guarantees that forms part of the
           service agreements.                                                              (2)
                                                                                             [8]

Copyright reserved                                                               Please turn over

### Page 11

(EC/SEPTEMBER 2023)         MECHANICAL TECHNOLOGY (WELDING AND METALWORK)           11

 QUESTION 11: TERMINOLOGY (SPECIFIC)

 11.1   11.1.1        Length CG = √602 + 1302 + 2602 

                                = √88 100

                                = 296,82 mm                                        (2)

        11.1.2        Length BG = √602 + 1752 + 2602 

                                = √101 825

                                = 319,10 mm                                        (2)

        11.1.3        Length AE = √602 + 1602 + 2602 

                                = √96 800

                                = 311,13 mm                                        (2)

        11.1.4        Length GD = √1302 + 1402 + 2602 

                                = √104 100

                                = 322,43 mm                                        (2)

        11.1.5        Length HC = √402 + 1302 + 2602 

                                = √86 100

                                = 293,43 mm                                        (2)

        11.1.6        Length HK = √1302 + 2602 

                                = √84 500

                                = 293,43 mm                                        (2)

 11.2   11.2.1        Length AB = 𝜋 x D ÷ 2 

                                = 𝜋 x 800 ÷ 2 

                                =1 256,8 mm                                        (3)

Copyright reserved                                                     Please turn over

### Page 12

12               MECHANICAL TECHNOLOGY (WELDING AND METALWORK)   (EC/SEPTEMBER 2023)

        11.2.2       Circumference of small circle:

                     Circumference = 𝜋 𝑥 D 

                                    = 𝜋 x 350 

                                    = 1 099,7 mm                                (3)

        11.2.3       Length 0 – 2:
                     0–2=D÷2 

                          = 350 ÷ 2 

                          = 175 mm                                             (3)
                                                                               [21]

                                                                  TOTAL:       200

Copyright reserved                                                  Please turn over

## Related documents

- [MECH TECH GR12 QP SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept2023-welding-english/49e9215c-dc78-48c3-a526-4baaf59158d8) — Mechanical Technology · QP · 2023 · Eng
- [MECH TECH GR12 MEMO SEPT 2020 Auto English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept-2020-auto-english/9066fed3-db75-4436-9ea3-0a432f99cc0b) — Mechanical Technology · Memo · 2020 · Eng
- [MECH TECH GR12 QP SEPT 2020 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept-2020-welding-english/fb1b7d42-462f-47a9-b370-31ff67b36f87) — Mechanical Technology · QP · 2020 · Eng
- [MECH TECH GR12 QP SEPT 2020 Auto English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept-2020-auto-english/5a5fe226-4c82-4735-bd84-25a08bed5162) — Mechanical Technology · QP · 2020 · Eng
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 English](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-english/b985e4dd-9a08-4ec2-a07b-64edd6f727ea) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Welding) GR12 MEMO SEPT 2018 English](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept-2018-english/1b0b4dd6-b53e-485d-9068-6f378eb8c9f3) — Mechanical Technology · Memo · 2018 · Eng

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-eng/1523a16f-2012-4f13-a922-86cbb5900666) — QP · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
