# Mechanical Technology Grade 12 Eastern Cape Prelim 2024 Memo

> Grade 12 Mechanical Technology memorandum from the Eastern Cape Prelim Exam 2024 (English), 15 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2024-welding-metalwork-english/2c18efa9-a7cc-42c1-a732-2ff3511c8c1c
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Language: English
- Document type: Memorandum
- Year: 2024
- Exam period: Eastern Cape Prelim Exam
- Curriculum: CAPS
- Pages: 15

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 Eastern Cape Prelim 2024 Memo](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2024-welding-metalwork-english/2c18efa9-a7cc-42c1-a732-2ff3511c8c1c)

## About this document

Mechanical Technology · Grade 12 · Eastern Cape Prelim Exam · 2024 · English. Memorandum, 15 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                        NATIONAL
                   SENIOR CERTIFICATE

                            GRADE 12

                      SEPTEMBER 2024

                MECHANICAL TECHNOLOGY:
                WELDING AND METALWORK
                   MARKING GUIDELINE

MARKS:   200

                   This marking guideline consists of 14 pages.

                    Hosted by www.ecexams.co.za.

### Page 2

Downloaded from hlayiso.com
2             MECHANICAL TECHNOLOGY (WELDING AND METALWORK)               (EC/SEPTEMBER 2024)

QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)

1.1    B✓                                                                                 (1)

1.2    A✓                                                                                 (1)

1.3    C✓                                                                                 (1)

1.4    C✓                                                                                 (1)
1.5    A✓                                                                                 (1)
1.6    D✓                                                                                 (1)
                                                                                          [6]

QUESTION 2: SAFETY (GENERIC)
2.1    Gas cylinder safety precautions:
       • Always store and use gas cylinders in an upright position. ✓
       • Never stack cylinders on top of one another. ✓
       • Do not bang or work on the cylinders. ✓
       • Never allow cylinders to fall. ✓
       • No oil and grease should come into contact with gas cylinders or fittings. ✓
       • Keep the caps on the cylinders for protection. ✓                (Any 2 x 1)     (2)
2.2    Employers’ responsibility regarding safety:
       • Provide and maintain working systems, work area, equipment and tools in
         a safe condition. ✓
       • Eliminate or reduce any hazard or potential hazard. ✓
       • Produce, handle, store and transport goods safely. ✓
       • Ensure that every person employed complies with the requirements of this
         Act. ✓
       • Enforce measures, if necessary, in the interest of health and safety. ✓
       • Appoint a person who is trained and who have the authority to ensure that
         employee take precautionary measures. ✓                          (Any 2 x 1)    (2)
2.3    Safety precautions before switching on the angle grinder:
       • Make sure that there are no cracks or chips on the disc. ✓
       • Make sure that there are no flammable materials nearby. ✓
       • Ensure that guards are in place. ✓
       • Wear the appropriate PPE especially eye protection. ✓           (Any 2 x 1)     (2)
2.4    Welding goggles:
       • To protect your eyes against sparks. ✓
       • To protect your eyes against heat. ✓
       • To see where to weld. ✓                                          (Any 2 x 1)    (2)
2.5    Disadvantages of process layout:
       • Production is not always continuous. ✓
       • Transportation costs between process departments may be high. ✓
       • Additional time is spent in testing and sorting as the product moves to the
          different departments. ✓
       • Damage to fragile goods may result from extra handling. ✓        (Any 2 x 1)    (2)
                                                                                        [10]

Copyright reserved                                                           Please turn over

                          Hosted by www.ecexams.co.za.

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2024)     MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                      3

QUESTION 3: MATERIALS (GENERIC)

3.1    Reason to cut from the unmarked end:
       • Marking does not get lost ✓
       • Be able to identify the material ✓                               (Any 1 x 1)     (1)

3.2    Heat-treatment processes properties:

                     PROCESS                             PROPERTY
       3.2.1    Hardening              Very hard, high tensile strength and brittle ✓
       3.2.2    Tempering              Tough, hard ✓
       3.2.3    Annealing              Soft, ductile, low tensile strength ✓
       3.2.4    Normalising            Tough and machinable ✓                             (4)

3.3    Heat-treatment process steps:
       • Heat the metal slowly to a temperature below the critical temperature. ✓
       • Soak it at that temperature for a period. ✓
       • Quench / cool in an appropriate quenching medium. ✓                              (3)

3.4    Quenching media:
       • Water 
       • Brine 
       • Oil                                                                             (3)

3.5    Types of tests:
       3.5.1 Filing test ✓                                                                (1)

       3.5.2    Spark test ✓                                                              (1)

       3.5.3    Bending test ✓                                                            (1)
                                                                                         [14]

Copyright reserved                                                           Please turn over

                           Hosted by www.ecexams.co.za.

### Page 4

Downloaded from hlayiso.com
4             MECHANICAL TECHNOLOGY (WELDING AND METALWORK)   (EC/SEPTEMBER 2024)

QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)

4.1    A✓                                                                     (1)

4.2    D✓                                                                     (1)

4.3    C✓                                                                     (1)

4.4    C✓                                                                     (1)

4.5    B✓                                                                     (1)

4.6    A✓                                                                     (1)

4.7    C✓                                                                     (1)

4.8    B✓                                                                     (1)

4.9    C✓                                                                     (1)

4.10   D✓                                                                     (1)

4.11   A✓                                                                     (1)

4.12   C✓                                                                     (1)

4.13   B✓                                                                     (1)

4.14   D✓                                                                    (1)
                                                                            [14]

Copyright reserved                                               Please turn over

                         Hosted by www.ecexams.co.za.

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2024)     MECHANICAL TECHNOLOGY (WELDING AND METALWORK)               5

QUESTION 5: TERMINOLOGY (TEMPLATES) (SPECIFIC)

5.1    Template loft is separated from the workshop because:
       • It is quieter ✓
       • The lighting is better ✓
       • All equipment is at hand ✓
       • It is a permanent base ✓
       • Marking on the floor enhance accuracy ✓                  (Any 3 x 1)      (3)

5.2    5.2.1    OSU ✓                                                              (1)

       5.2.2    Galvanised ✓                                                       (1)

       5.2.3    This side up ✓                                                     (1)

5.3    Dimensions of the required material:
       5.3.1 Mean diameter = Outside diameter – plate thickness
                            = 600 – 20 ✓
                            = 580 mm ✓                                             (2)

       5.3.2    Mean circumference = 𝜋 x mean diameter ✓
                                   = 𝜋 x 580 ✓
                                   = 1 822,13 mm
                                   = 1 822 mm ✓                                    (3)

5.4    Welding elements:
       A ‒ Tail ✓
       B ‒ Weld symbol (Fillet weld) ✓
       C ‒ Pitch of weld ✓
       D ‒ Site weld ✓
       E ‒ Arrow ✓
       F ‒ Weld all round ✓                                                        (6)

5.5    Template loft machine tools:
       • Circular saw ✓
       • Planer ✓
       • Drilling machine ✓
       • Jig saw ✓
       • Sanding machine ✓
       • Shears for cutting cardboard ✓
       • Welding machine ✓
       • Angle grinder ✓
       • Bench grinder ✓
       • Guillotine ✓
       • Cut-off power saw ✓                                      (Any 2 x 1)      (2)

Copyright reserved                                                    Please turn over

                           Hosted by www.ecexams.co.za.

### Page 6

Downloaded from hlayiso.com
6              MECHANICAL TECHNOLOGY (WELDING AND METALWORK)             (EC/SEPTEMBER 2024)

 5.6 Resistance welding symbols:
     5.6.1 Spot weld symbol:

                                                      ✓✓                                 (2)

       5.6.2    Projection weld symbol:

                                                       ✓✓                               (2)
                                                                                       [23]

 QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC)

 6.1 Workshop machines and their functions:
     6.1.1 Pedestal drill press ✓
           Function:
           • Used to drill a wide variety of materials including ferrous and non-
             ferrous metals and composite plastics. ✓                                    (2)

       6.1.2    Hydraulic press ✓
                Function:
                • To install or remove components, such as bearings or bushes, in
                  mechanical devices. ✓                                                  (2)

       6.1.3    Bench grinder ✓
                Function:
                • Used for grinding, sharpening tools and removing excess
                  material. ✓                                                            (2)

 6.2 Gas welding equipment:
     6.2.1 Regulator ✓                                                                   (1)

       6.2.2    A ‒ Gauge ✓
                B ‒ Outlet ✓
                C ‒ Inlet ✓
                D ‒ Pressure adjusting knob ✓                                            (4)

 6.3 Operating principle of a power-driven guillotine:
     Power driven guillotine:
     • A bottom cutting blade is fixed horizontally. ✓
     • A top cutting blade moves downwards. ✓
     • It is driven by an electric motor activated by a foot pedal. ✓
     • It is driven by a flywheel, gearbox, and axle. ✓
     • It lowers the blade by eccentric motion or action. ✓                              (4)

 6.4 Manual guillotine labels:
     A ‒ Spring-loaded down pedal/foot pedal ✓
     B ‒ Cutting table ✓
     C ‒ Pressure plate/Blade guard ✓                                                   (3)
                                                                                       [18]

Copyright reserved                                                          Please turn over

                           Hosted by www.ecexams.co.za.

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2024)     MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                 7

 QUESTION 7: FORCES (SPECIFIC)

 7.1 Space diagram:
     Scale 1 : 100

                      500 N                  100 N

                                                 (4 marks)
       200 N                       400 N

       Force diagram (NOTE: Diagram is NOT according to scale; markers must
       redraw the diagram.)

       Scale: 1 mm = 5N                                            (5 marks)

               MEMBER                FORCE(N)            NATURE
                 AE                   275 N ✓            STRUT ✓
                 EF                   425 N ✓            STRUT ✓
                 FC                   300 N ✓            STRUT ✓
                 BF                   200 N ✓             TIE ✓
                 ED                   200 N ✓             TIE ✓
                                                                      (10 marks)

       NOTE: (Tolerance:  2 mm) (2 mm = 10 N)                                      (19)

Copyright reserved                                                      Please turn over

                              Hosted by www.ecexams.co.za.

### Page 8

Downloaded from hlayiso.com
8              MECHANICAL TECHNOLOGY (WELDING AND METALWORK)   (EC/SEPTEMBER 2024)

 7.2 Calculating reaction forces:

       7.2.1    Take moments about RL:
                (5  3) + (3  7) = RR  10 ✓
                 15 + 21 =10 RR
                         36 = 10 RR ✓
                         36
                               = RR
                         10
                        3,6 KN = RR ✓

                Take moments about RR:
                (3  3) + (5  7) = 10  RL ✓
                        9 + 35 = 10 RL

                          44 = 10 RL ✓

                          44
                               = RL
                          10

                     4,4 KN = RL ✓                                             (6)

       7.2.2    Calculating Bending Moments:
                BMA= (4,4  0) = 0 KN.m ✓
                BMB= (4,4  3) = 13,2 KN.m ✓
                BMC = (4,4  7) ‒ (5  4) – (3 x 0)
                    = 30,8 ‒ 20 ‒ 0
                    = 10,8 KN.m ✓
                BMD= (4,4  10) ‒ (5  7) ‒ (3  3)
                    = 44 − 35 − 9
                    = 0 KN.m ✓                                                 (4)

Copyright reserved                                                Please turn over

                            Hosted by www.ecexams.co.za.

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2024)        MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                            9

       7.2.3    Bending moment diagram:
                NOTE: Diagram NOT drawn to scale.

                                                                                                   (4)

 7.3 Stress and Strain:

       7.3.1    Stress
                           𝐹𝑜𝑟𝑐𝑒                       𝜋 × (38)2
                𝑠𝑡𝑟𝑒𝑠𝑠 = 𝐴𝑟𝑒𝑎         ✓       𝐴𝑟𝑒𝑎 =     106
                                                                   ✓

                                                  = 4,536459792  10−3 ✓
                           100 × 103
                𝑠𝑡𝑟𝑒𝑠𝑠 =     𝜋(38)2
                                          ✓
                              106

                         = 22 043 620,93 𝑃𝑎 ✓

                         = 22,04 𝑀𝑃𝑎 ✓                                                             (6)
       7.3.2    Strain
                           ∆𝑙
                𝑠𝑡𝑟𝑎𝑖𝑛 = 𝑜𝑙 ✓
                           0,5
                𝑠𝑡𝑟𝑎𝑖𝑛 = 150 ✓

                         = 3,333333333 × 10−3 ✓
                         = 3,33 × 10−3                                                             (3)

       7.3.3    Young’s modulus of elasticity
                                                 𝑆𝑡𝑟𝑒𝑠𝑠
                𝑌𝑜𝑢𝑛𝑔′ 𝑠 𝑚𝑜𝑑𝑢𝑙𝑢𝑠 𝑜𝑓 𝑒𝑙𝑎𝑠𝑡𝑖𝑐𝑖𝑡𝑦 = 𝑆𝑡𝑟𝑎𝑖𝑛 ✓

                                                                   22043620,93
                                                         =                        ✓
                                                             3,333333333 × 10−3

                                                         = 6 613,09 𝑃𝑎 ✓                          (3)
                                                                                                 [45]

Copyright reserved                                                                    Please turn over

                                 Hosted by www.ecexams.co.za.

### Page 10

Downloaded from hlayiso.com
10            MECHANICAL TECHNOLOGY (WELDING AND METALWORK)             (EC/SEPTEMBER 2024)

QUESTION 8: JOINING METHODS (INSPECTION OF WELD) (SPECIFIC)

8.1    Visual inspection process:
       • Shape of profile ✓
       • Uniformity of the surface ✓
       • Overlap ✓
       • Undercutting ✓
       • Penetration bead ✓
       • Root groove ✓                                                 (Any 3 x 1)      (3)

8.2    Heat affected zone ✓                                                             (1)

8.3    Inspection during oxy-acetylene welding:
        • Correct flame for the work on hand. ✓
        • Correct angle of blowpipe and rod, depending on the method being used. ✓
        • Depth of fusion and amount of penetration. ✓
        • The rate of progress along the joint. ✓                      (Any 3 x 1)      (3)

8.4    Weld gauge:
       • Angle of preparation ✓
       • Misalignment ✓
       • Fillet weld leg length/excess weld metal ✓
       • Fillet weld throat ✓
       • Undercut ✓                                                    (Any 3 x 1)      (3)

8.5    Nick break test:
       • Make a hacksaw cut at both edges, through the centre of the weld. ✓
       • Place specimen on two supports/bench vice. ✓
       • Use a sledgehammer to break the specimen in the area of the cuts. ✓
       • Inspect the exposed weld metal in the break ✓ for incomplete fusion, slag
          inclusion (or other welding defects). ✓                                       (5)

8.6    Welding defects:
       8.6.1 Slag inclusion:
              • Included angle too narrow ✓
              • Rapid chilling ✓
              • Welding temperature to low / current too low ✓
              • High viscosity of molten metal ✓
              • Slag not removed from previous weld run ✓
              • Incorrect welding technique ✓
              • Surface contamination ✓
              • Too big weaving action ✓
              • Too slow speed along the weld joint ✓
              • Too short arc length ✓                                 (Any 2 x 1)      (2)

Copyright reserved                                                         Please turn over

                          Hosted by www.ecexams.co.za.

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2024)      MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                     11

       8.6.2    Incomplete penetration:
                • Welding current is too low ✓
                • Travel speed is too fast ✓
                • Incorrect electrode angle ✓
                • Poor edge preparation ✓
                • Insufficient root gap ✓
                • Gas flow too low (gas welding) ✓                        (Any 2 x 1)      (2)

 8.7 Disadvantages of using liquid dye penetrant:
     • Might miss problems below the surface. ✓
     • Cannot work on porous materials. ✓                                                  (2)

 8.8 Welding defects:
     8.8.1 Spatter ✓                                                                       (1)

       8.8.2    Undercut ✓                                                                (1)
                                                                                         [23]

 QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC)

 9.1 Distortion:
     • Weld distortion is the warping of the base metal ✓ caused by heat from the
        welding arc/flame. ✓                                                               (2)

 9.2 Quenching mediums:
     • Oil ✓
     • Water ✓
     • Brine/ salt water ✓
     • Liquid salts ✓
     • Molten lead ✓                                                                       (3)

 9.3 Iron-carbon equilibrium diagram:
     A ‒ Ferrite and pearlite ✓
     B ‒ Ferrite and austenite ✓
     C ‒ Austenite ✓
     D ‒ Cementite and austenite ✓
     E ‒ Pearlite and cementite ✓                                                          (5)

 9.4 Definition of terms:

       9.4.1    Elastic deformation – occurs when the joint recovers to its original ✓
                position, once the stresses have been relieved. ✓                          (2)

       9.4.2    Shrinkage – is a form of plastic deformation ✓ where the metal has
                deformed as a result of contraction on cooling. ✓                          (2)

Copyright reserved                                                            Please turn over

                             Hosted by www.ecexams.co.za.

### Page 12

Downloaded from hlayiso.com
12            MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                   (EC/SEPTEMBER 2024)

 9.5    Methods to reduce distortion:
        • Do not over weld ✓
        • Apply intermittent welding ✓
        • Place welds near the neutral axis ✓
        • Use as few passes as possible ✓
        • Use back-step welding ✓
        • Anticipate the shrinkage forces ✓
        • Plan the welding sequence ✓
        • Use strong backs ✓
        • Use clamps, jigs and fixtures ✓                                     (Any 2 x 1)     (2)

 9.6    Types of shrinkage:
        9.6.1   Transverse shrinkage ✓                                                        (1)

        9.6.2        Longitudinal shrinkage ✓                                                (1)
                                                                                            [18]

 QUESTION 10: MAINTENANCE (SPECIFIC)

 10.1   Effects of overloading the following machines:
        10.1.1 Overloading a punch and shearing machine:
                 • Dulling or breaking blades/punches. ✓
                 • Putting strain on the motor and drive mechanism. ✓ (Any 1 x 1)             (1)

        10.1.2       Rolling machine:
                     • Limit the lifespan of bearings, gearbox and motor. ✓                   (1)

 10.2   Locking out large machines before maintenance:
        • Due to the dangers associated with large machines. ✓
        • To ensure that isolation switches are switched off. ✓
        • To ensure that nobody can turn on the machine while maintenance is
          being done. ✓                                              (Any 2 x 1)              (2)

 10.3   Purpose of keeping service records:
        • Assist in the monitoring of the condition of the machines. ✓
        • Assist in upholding warrantees. ✓
        • Assist in keeping a history of maintenance and repairs. ✓                           (2)

 10.4   Lubrication is not applicable to bench grinders because the bearings on the
        spindle shaft are factory lubricated ✓ and sealed with an oil seal to prevent
        leakage. ✓                                                                            (2)
                                                                                              [8]

Copyright reserved                                                               Please turn over

                              Hosted by www.ecexams.co.za.

### Page 13

Downloaded from hlayiso.com
(EC/SEPTEMBER 2024)         MECHANICAL TECHNOLOGY (WELDING AND METALWORK)                 13

 QUESTION 11: TERMINOLOGY (DEVELOPMENT) (SPECIFIC)

 11.1   Transition pieces:

        11.1.1        Off-Centre hopper sketch

                                                    ✓✓
                                                                                          (2)

        11.1.2        On-Centre hopper sketch

                                                         ✓✓                               (2)

 11.2   Conical hopper

        11.2.1        Vertical height (DE):
                                                      opposite
                                               tan θ =
                                                      adjacent
                                                 DE = tan 70  EC ✓
                                                    = 2,75  1
                                                    = 2,75 m       ✓                     (2)

        11.2.2        Main radius (AC):
                                                          adjacent
                                              cos θ =
                                                         hypotenuse

                                                                BC
                                                AC =                     ✓
                                                          COS 70°

                                                         2,5
                                                   =                 ✓
                                                         0,34

                                                   = 7,35 m ✓                             (3)

Copyright reserved                                                           Please turn over

                               Hosted by www.ecexams.co.za.

### Page 14

Downloaded from hlayiso.com
14            MECHANICAL TECHNOLOGY (WELDING AND METALWORK)         (EC/SEPTEMBER 2024)

        11.2.3       Small radius (AD):
                                                        adjacent
                                              cos𝜃 =
                                                       hypotenuse

                                                         EC
                                              DC = COS 70° ✓

                                                         1
                                                  =
                                                        0,34

                                                   = 2,94 m ✓

                     Now AD = AC − DC
                            = 7,35 − 2,94 ✓
                             = 4,41 m ✓                                             (4)

        11.2.4       Circumference = π  MD
                                   =π5✓
                                   = 15,71 m ✓                                      (2)

 11.3   Calculating True Lengths:

        11.3.1       A–1 = √1252 + 1002 + 4502 ✓

                         = 477,62 ✓                                                 (2)

        11.3.2       A–2 = √5002 + 1252 + 4502 ✓

                          = 684,2 ✓                                                 (2)

        11.3.3       B–3 = √4752 + 1002 + 4502 ✓

                          = 661,91 ✓                                               (2)
                                                                                  [21]

                                                                      TOTAL:       200

Copyright reserved                                                     Please turn over

                             Hosted by www.ecexams.co.za.

### Page 15

Downloaded from hlayiso.com
(EC/SEPTEMBER 2024)   MECHANICAL TECHNOLOGY (WELDING AND METALWORK)            15

Copyright reserved                                                Please turn over

                        Hosted by www.ecexams.co.za.

## Related documents

- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — Mechanical Technology · QP · 2024 · Eng
- [MECH TECH GR12 MEMO SEPT 2020 Auto English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept-2020-auto-english/9066fed3-db75-4436-9ea3-0a432f99cc0b) — Mechanical Technology · Memo · 2020 · Eng
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 English](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-english/b985e4dd-9a08-4ec2-a07b-64edd6f727ea) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Welding) GR12 MEMO SEPT 2018 English](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept-2018-english/1b0b4dd6-b53e-485d-9068-6f378eb8c9f3) — Mechanical Technology · Memo · 2018 · Eng
- [MECH TECH GR12 QP SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept2023-welding-english/49e9215c-dc78-48c3-a526-4baaf59158d8) — Mechanical Technology · QP · 2023 · Eng
- [MECH TECH GR12 QP SEPT 2020 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept-2020-welding-english/fb1b7d42-462f-47a9-b370-31ff67b36f87) — Mechanical Technology · QP · 2020 · Eng

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-eng/1523a16f-2012-4f13-a922-86cbb5900666) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Automotive) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-afr/8d31d25d-e192-4aa9-b448-efab233391a1) — QP · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
