# Mechanical Technology Grade 12 Automotive 2018 Memo (Eng)

> Grade 12 Mechanical Technology memorandum from the Automotive 2018 (English), 12 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-english/b985e4dd-9a08-4ec2-a07b-64edd6f727ea
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Language: English
- Document type: Memorandum
- Year: 2018
- Exam period: Automotive
- Curriculum: CAPS
- Pages: 12

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 Automotive 2018 Memo (Eng)](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-english/b985e4dd-9a08-4ec2-a07b-64edd6f727ea)

## About this document

Mechanical Technology · Grade 12 · Automotive · 2018 · English. Memorandum, 12 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                       NATIONAL
                  SENIOR CERTIFICATE

                         GRADE 12

                   SEPTEMBER 2018

   MECHANICAL TECHNOLOGY (AUTOMOTIVE)
           MARKING GUIDELINE

MARKS:   200

               This marking guideline consists of 12 pages.

### Page 2

Downloaded from hlayiso.com
2                         MECHANICAL TECHNOLOGY (AUTOMOTIVE)              (EC/SEPTEMBER 2018)

 QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)

 1.1    D✓                                                                                (1)

 1.2    C✓                                                                                (1)

 1.3    D✓                                                                                (1)

 1.4    D✓                                                                                (1)

 1.5    D✓                                                                                (1)

 1.6    B✓                                                                                (1)
                                                                                          [6]

 QUESTION 2: SAFETY (GENERIC)

 2.1    Unsafe conditions:
        • Working at unsafe speeds. 
        • Grinding without goggles. 
        • Fooling and playing around workshop. 
        • Spilling liquids on floor. 
        • Lubricating/cleaning moving parts. 
        • Wearing loose clothing near moving parts. 
        • Grinding on the side of the grinding wheel.                       (Any 4)      (4)

 2.2    Assessing first aid situation:
        • Environmental observation. 
        • Visible signs and symptoms. 
        • Indicators to diagnosis. 
        • Vital functions. 
        • Stopping any serious bleeding. 
        • Immediate treatment of cardiac arrest.                              (Any 2)    (2)

        2.3.1    Advantages of product layout:
                 • Handling of material is limited to a minimum. 
                 • Time period of manufacturing cycle is less. 
                 • Production control is almost automatic. 
                 • Greater use of unskilled labour is possible. 
                 • Less total inspection is required. 
                 • Less total floor space is needed per unit of production.  (Any 2)     (2)

        2.3.2    Advantages of the process layout of machines
                 • High machine utilisation because more than one product is
                   manufactured. 
                 • Better supervision as a result of subdivision of processes. 
                 • Less interruption in flow of work when machines become
                   defective. 
                 • Lower equipment cost, since one machine can produce more
                   than one product. 
                 • Better control of total manufacturing cost. 
                 • Greater flexibility in the production process.             (Any 2)    (2)
                                                                                         [10]

Copyright reserved                                                            Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)          MECHANICAL TECHNOLOGY (AUTOMOTIVE)                            3

 QUESTION 3: MATERIALS (GENERIC)

 3.1    Purpose of case hardening.
        The objective is to produce a hard case over a tough core.                           (2)

 3.2    Factors of hardness:
        Work piece size 
        Quenching rate 
        Carbon content                                                                        (3)

 3.3    Four kinds of quenching mediums:
        Water and salt (brine) 
        Tap water 
        Liquid salts 
        Molten lead 
        Soluble oil and water 
        Oil                                                                     (Any 4)       (4)

 3.4    Reason for hardened steel to be tempered:
        To reduce brittleness  and to give the work piece a more fine-grained
        structure.                                                                            (2)

 3.5    Test on materials:

                                         MATERIAAL
        Type of test            Mild Steel      High Speed Steel           Cast Iron
        Sound Test       3.5.1 Medium metallic  3.5.2 Low ring          3.5.3 Dull
                               sound                 sound                  sound        (3)
                                                                                           [14]

Copyright reserved                                                         Please turn over

### Page 4

Downloaded from hlayiso.com
4                       MECHANICAL TECHNOLOGY (AUTOMOTIVE)   (EC/SEPTEMBER 2018)

 QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)

 4.1    C✓                                                                  (1)

 4.2    D✓                                                                  (1)

 4.3    A✓                                                                  (1)

 4.4    B✓                                                                  (1)

 4.5    D✓                                                                  (1)

 4.6    C✓                                                                  (1)

 4.7    B✓                                                                  (1)

 4.8    A✓                                                                  (1)

 4.9    A✓                                                                  (1)

 4.10   C✓                                                                  (1)

 4.11   B✓                                                                  (1)

 4.12   A✓                                                                  (1)

 4.13   D✓                                                                  (1)

 4.14   A✓                                                                   (1)
                                                                            [14]

Copyright reserved                                               Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)          MECHANICAL TECHNOLOGY (AUTOMOTIVE)                              5

 QUESTION 5: TOOLS AND EQUIPMENT (SPECIFIC)

 5.1    Functions of diagnostic scanner:
        • It scans all systems on the vehicle and makes adjustments on the different
          sensors. ✓
        • It is used by professional technicians who perform programming on regular
          basis. ✓
        • Used to diagnose some flaws in the system.                    (Any 2 x 1)           (2)

 5.2    How to couple up a diagnostic scanner:
        • Plug the scan tool into the OBD-II connector under the dash board. ✓
        • Turn the key on but do not start the engine. ✓
        • Follow the instructions shown on the screen and enter the necessary
          information. ✓                                                                      (3)

 5.3    Wheel alignment equipment:                                                            (2)

        5.3.1    Bubble gauge is used to test the castor, chamber and king pin
                 inclination angle of a motor vehicle. ✓✓

        5.3.2    Turntable makes it possible to turn the front wheel to the required
                 angle when taking caster reading. ✓✓                                         (2)

 5.4    Disadvantages of unbalanced wheels:
        • Excessive wear on tyres ✓
        • Drag on the steering ✓
        • There will be pressure on the bearings ✓                                 (3 x 1)    (3)

 5.5    Set up of static balancing:
        • Mount the wheel on a horizontal spindle so that it will be free to turn on the
           spindle through its centre. ✓
        • If the wheel is in static balance, it will come to rest in any position. ✓
        • If the wheel is out of balance, it will always come to rest at one point, the
           heavy spot, at the bottom. ✓                                                       (3)

 5.6    Reasons for wheel balancing:
        • When there are wheel vibrations (shimming). ✓
        • When you buy a new tyre. ✓                                                          (2)

 5.7    •   Ensure wheels are in straight ahead position. ✓
        •   Remove protection washer on bubble gauge end. ✓
        •   Fit the gauge to the centre of the wheel. ✓
        •   Level the bubble D. ✓
        •   Read bubble A. ✓                                                                  (5)

 5.8    The result is printed on the card which serves as an evidence for report
        making. ✓                                                                             (1)
                                                                                             [23]

Copyright reserved                                                             Please turn over

### Page 6

Downloaded from hlayiso.com
6                         MECHANICAL TECHNOLOGY (AUTOMOTIVE)             (EC/SEPTEMBER 2018)

 QUESTION 6: ENGINES (SPECIFIC)

 6.1 Functions of crankshaft:
     • It converts oscillatory motion into rotary motion. ✓
     • It drives other mechanically powered components such as the cam shaft, oil
       pump, compressor alternator, water pump etc. ✓                                          (2)
 6.2 Causes of crankshaft vibration:
     • The action of unbalanced forces upon the shaft. ✓
     • Torsional effect of the power stroke. ✓                                                 (2)
 6.3 Twisting effect on the crankshaft:
     The torque of crankshaft is derived from the power stroke, which forces the
     crank pin to rotate about the centre of the main journals and so tends to twist the
     shaft. ✓✓                                                                                 (2)
 6.4 Features to improve engine balance:
     • Webs are extended and drilled to form balanced mass pieces at points
       opposite the connecting rod. ✓
     • Connecting rods and pistons are kept as light as possible. ✓
     • The flywheel must be carefully fitted and balanced with the crankshaft
       flange. ✓
     • Vibration dampers are fitted to the front of the crankshaft to smooth out
       engine vibrations. ✓                                                                    (4)
 6.5 Static balancing of a crankshaft:
     Static balance of a crankshaft is when the mass in all directions from the centre
     of rotation is equal while the crankshaft is at rest. ✓✓                                  (2)
 6.6 Crankshaft areas:
     • Crank arms ✓
     • Counter weights ✓
     • Flywheel ✓                                                                              (3)
 6.7 Factors that determine firing order:
     •   Position of the cranks on the crankshaft. ✓
     •   Arrangement of the cams on the camshaft. ✓                                            (2)
 6.8 Ways of determining firing order:
     • It is marked on the engine ✓
     • It is given in the workshop or owner’s manual ✓
     • Remove the tapper cover to determine the intake and exhaust valves. ✓                   (3)
 6.9 6.9.1       A    – Air inlet
                 B    – Turbine housing
                 C    – Turbine wheel (exhaust)
                 D    – Exhaust inlet
                 E    – Compressor air discharge
                 F    – Compressor turbine wheel                                               (6)

       6.9.2     Converts exhaust energy to rotary motion.                                     (1)

       6.9.3     Pumps air into the inlet manifold.                                          (1)
                                                                                            [28]

Copyright reserved                                                            Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)          MECHANICAL TECHNOLOGY (AUTOMOTIVE)                             7

 QUESTION 7: FORCES (SPECIFIC)

 7.1    7.1.1    Swept volume:
                 It is the volume between the BDC and TDC in a cylinder. ✓                 (1)

        7.1.2    Clearance volume:
                 It is the volume of the space above the crown of the piston when it is
                 at TDC in the combustion chamber. ✓                                       (1)

        7.1.3    Compression ratio:
                 Is the ratio of compression of the inlet charge of the compression
                 stroke to the total volume of the cylinder. ✓                             (1)

        7.1.4    Mechanical efficiency:
                 Relationship between engine power and brake power at the drive
                 shaft. ✓                                                                  (1)

 7.2    Methods of raising compression ratio:
        • Fit a thinner gasket between cylinder block and cylinder head. ✓
        • Machined metals from cylinder head. ✓
        • Skim metals from cylinder block. ✓
        • Fit piston with suitable higher crown. ✓
        • Fit crankshaft with suitable longer stroke connecting rods. ✓
        • Increase the bore of cylinder ✓                                (Any 4 x 1)       (4)

 7.3    Swept volume:
                           π D2
        Swept Volume            L
                             4
                           π (9,0) 2
                                     8,6 ✓ ✓
                               4
                          547,12 cm3 ✓                                                    (3)

        Compression ratio:

                                   ✓
                                   ✓ ✓                                                     (3)
                                   ✓ ✓
                                   ✓ ✓

Copyright reserved                                                            Please turn over

### Page 8

Downloaded from hlayiso.com
8                            MECHANICAL TECHNOLOGY (AUTOMOTIVE)   (EC/SEPTEMBER 2018)

 7.4                                   30
        New compression ratio              10
                                      100
                                     3  10      ✓
                                     13 : 1
                                   π D2
             Swept Volume              L
                                    4
                                   π (D)2
                     13 x61  61          8,6           ✓✓
                                     4
                              D  10,4 cm
                                                      ✓                           (4)

 7.5    7.5.1    P  1400 000Pa
                         78
                 L
                       1000
                      0,078 m
                       π D2
                 A
                         4
                       π 0,098 2
                     
                           4
                      7,54  10 3 m2
                        4800
                 N
                        60  2
                      40 r/s
                 n  4 cylinders                                                  (8)

        7.5.2

                                                                                  (4)

        7.5.3

                                                                                  (2)
                                                                                 [32]

Copyright reserved                                                    Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)          MECHANICAL TECHNOLOGY (AUTOMOTIVE)                              9

 QUESTION 8: MAINTENANCE (SPECIFIC)

 8.1    Exhaust gases:
        • Hydrocarbon ✓
        • Carbon monoxide ✓
        • Carbon dioxide ✓
        • Nitrogen oxide ✓
        • Sulphur dioxide ✓                                                  (Any 4 x 1)      (4)

 8.2    Possible causes of high CO (carbon monoxide) reading:
        • Rich air fuel mixture ✓
        • Incorrect idle speed ✓
        • Clogged air filter ✓
        • Faulty choke ✓                                                     (Any 3 x 1)      (3)

 8.3    Possible causes of high oxygen readings:
        • Too lean air fuel ratio ✓
        • Ignition problems ✓
        • Vacuum leaks ✓
        • Catalytic convertor not working ✓                                  (Any 3 x 1)      (3)

 8.4    8.4.1    Hissing sound from the inlet manifold indicates worn out inlet
                 valves. ✓

        8.4.2    Hissing sound from exhaust manifold indicates worn out exhaust
                 valves. ✓

        8.4.3    Hissing sound from the dip stick or oil cap indicates worn out rings. ✓      (3)

 8.5    Fuel pressure test specifications:
        • Fuel pressure at engine idle ✓
        • Fuel pressure when engine is cold ✓
        • Fuel pressure when engine is hot ✓
        • Fuel pressure at high revolution ✓                                 (Any 3 x 1)      (3)

 8.6    Possible causes of low fuel pressure readings:
        • Faulty fuel pump ✓
        • Blocked or restricted fuel filter ✓
        • Cracked or restricted fuel line ✓
        • Clogged pump inlet strainer ✓
        • Low voltage to the fuel pump ✓
        • Faulty or failed fuel pressure regulator ✓
        • Defective fuel pump relay ✓
        • Empty fuel tank ✓                                                  (Any 4 x 1)      (4)

 8.7    Cooling system pressure test:
        To detect leakage in the cooling system ✓                                             (1)

Copyright reserved                                                             Please turn over

### Page 10

Downloaded from hlayiso.com
10                        MECHANICAL TECHNOLOGY (AUTOMOTIVE)                (EC/SEPTEMBER 2018)

 8.8    Possible components to find leakage:
        • Hosepipe ✓
        • Water pump ✓
        • Radiator ✓
        • Welch or core plugs ✓
        • Interior heater radiator ✓
        • Heater caps ✓                                                        (Any 2 x 1)    (2)
                                                                                             [23]

 QUESTION 9: SYSTEMS AND CONTROL (AUTOMATIC GEARBOX) (SPECIFIC)

 9.1    Functions of automatic gearbox:
        • It relieves the driver of clutch and gearshift operation. ✓
        • It adjust the engine speed and power to meet varying needs. ✓
        • It provides parking lock. ✓                                   (Any 2 x 1)           (2)

 9.2    Disadvantages of automatic transmission:
        • More expensive to produce ✓
        • Special oil is required ✓
        • The oil must be clean ✓
        • If a car with automatic transmission has to be towed over a long distance,
           the propeller shaft must be removed ✓
        • If the car battery could not start the car, there is no alternative method to
           keep the engine running ✓                                           (Any 3 x 1)    (3)

 9.3    Operation of double epicyclic gear train in low gear:
        • The turbine shaft and the primary sun gear are coupled by the front
          clutch. ✓
        • The planet-gear carrier is held stationary by the rear brake band. ✓
        • The rear clutch is dis-engaged and the front brake band is free, leaving the
          secondary sun gear free. ✓
        • Drive is from the primary sun gear to the primary and secondary planet
          gears, which rotate around their own axis, to the annulus that is part of the
          output shaft. ✓                                                                     (4)

 9.4    Components of the torque converter:
        Impeller (pump) ✓
        Reactor (stator) ✓
        Turbine ✓                                                                             (3)

 9.5    Methods of cooling oil in automatic transmission:
        By using special oil cooler alongside the engine cooling radiator. ✓
        Oil circulates through a tank built into the bottom radiator tank. ✓                  (2)

 9.6    Advantages of transmission control unit:
        • Better fuel economy ✓
        • Reduced engine emissions ✓
        • Greater shift system reliability ✓
        • Improved shift feel ✓
        • Improved shift speed ✓
        • Improved vehicle handling ✓                                             (Any 4)     (4)
                                                                                             [18]

Copyright reserved                                                               Please turn over

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)            MECHANICAL TECHNOLOGY (AUTOMOTIVE)                             11

 QUESTION 10:          SYSTEMS AND CONTROL (AXLES, STEERING GEOMETRY AND
                       ELECTRONICS) (SPECIFIC)

 10.1   Functions of steering mechanism:
        • It enables the driver to be in control of the path taken by the vehicle at all
          times ✓and limit tyre wear ✓                                                              (2)

 10.2   Properties of a good steering mechanism:
        • Light and easy to control ✓
        • Free from vibrations and road shocks ✓
        • It must be as direct as possible without needing too much driver’s attention or
          effort ✓
        • Self-centring ✓
        • Must be able to operate effectively when affected by the action of the
          suspension or brake system ✓                                        (Any 4 x 1)           (4)

 10.3   Difference between positive and negative chamber:

                                                                                                    (4)

 10.4   Advantages of positive camber:
        • Easier steering ✓
        • Better grip on cambered road ✓
        • Worn out tyres are easy to identify ✓                                                     (3)

 10.5   10.5.1         Purpose of kingpin inclination:
                       It is designed to bring the front wheel back to the straight ahead
                       position ✓after navigating a curve ✓                                         (2)

        10.5.2         Purpose of Ackermann principle:
                       It is designed to enable a car to navigate a curve effectively ✓
                       without skidding ✓                                                           (2)

Copyright reserved                                                               Please turn over

### Page 12

Downloaded from hlayiso.com
12                        MECHANICAL TECHNOLOGY (AUTOMOTIVE)               (EC/SEPTEMBER 2018)

 10.6     Pre-checks on wheels:
          • Check the tyre for bruises, cracks and damaged side walls. ✓
          • Check the rim for damaged beads. ✓
          • Check for foreign matter on the rim and tyres. ✓                                 (3)

 10.7     Purpose of the catalytic converter:
          It converts the pollutants in the exhaust gases of the engine into a non-
          toxic substance, making it environmentally friendly. ✓                             (1)

 10.8     Requirements for a catalytic converter to function properly:
          • Unleaded petrol must be used. ✓
          • Working temperature must not be less than 250 0C. ✓
          • The ignition system must be accurately control. ✓
          • The Lambda probe exhaust gas sensor must function correctly. ✓
          • Persistent misfire damages the ceramic monolith. ✓
          • Burnt engine oil also damages the monolith. ✓              (Any 3 x 1)           (3)

 10.9     10.9.1      Manifold absolute pressure (MAP) sensor and the air flow
                      meters are used to measure the intake air volume ✓✓                    (2)

          10.9.2      Idle speed control (ISC)valve is controlled by ECU to
                      regulates the idle speed ✓✓                                            (2)

          10.9.3      Throttle position sensor (TPS) provides information about the
                      position of the throttle valve to the ECU ✓✓                           (2)

          10.9.4      Mass air flow meter is used to measure the engine load
                      conditions. ✓✓                                                         (2)
                                                                                            [32]

                                                                                TOTAL:       200

Copyright reserved                                                              Please turn over

## Related documents

- [MECHANICAL TECH (Welding) GR12 MEMO SEPT 2018 English](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept-2018-english/1b0b4dd6-b53e-485d-9068-6f378eb8c9f3) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 Eng D](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-eng-d/755d4907-fba9-478a-9a6d-cded15048da7) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 Afr D](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-afr-d/3f2fad2e-2e8e-494d-b250-7a3f03f1b1e3) — Mechanical Technology · Memo · 2018 · Afr
- [MECHANICAL TECH (Auto) QP SEPT 2018 Eng D](https://www.hlayiso.com/library/mechanical-tech-auto-qp-sept-2018-eng-d/83d208e4-1aa5-489e-a101-c36d34d667bf) — Mechanical Technology · QP · 2018 · Eng
- [MECHANICAL TECH (Auto) QP SEPT 2018 Afr D](https://www.hlayiso.com/library/mechanical-tech-auto-qp-sept-2018-afr-d/afa4bb7e-c1c0-43a2-b25a-d37b36790118) — Mechanical Technology · QP · 2018 · Afr
- [MECH TECH GR12 MEMO SEPT 2020 Auto English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept-2020-auto-english/9066fed3-db75-4436-9ea3-0a432f99cc0b) — Mechanical Technology · Memo · 2020 · Eng

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [MECH TECH GR12 QP SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept2023-welding-english/49e9215c-dc78-48c3-a526-4baaf59158d8) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — QP · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
