# Mechanical Technology Grade 12 2018 Memo (Eng)

> Grade 12 Mechanical Technology memorandum from the Welding And Metal Work 2018 (English), 16 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept-2018-eng-d/3032eeb1-ed56-402e-adc8-9a7795a645bd
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2018
- Exam period: Welding And Metal Work
- Curriculum: CAPS
- Pages: 16

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 2018 Memo (Eng)](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept-2018-eng-d/3032eeb1-ed56-402e-adc8-9a7795a645bd)

## About this document

Mechanical Technology · Grade 12 · Welding and Metal Work · 2018. Memorandum, 16 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                         NATIONAL
                    SENIOR CERTIFICATE

                         GRADE 12

                     SEPTEMBER 2018

  MECHANICAL TECHNOLOGY: WELDING AND
              METAL WORK
          MARKING GUIDELINE

MARKS:   200

               This marking guideline consists of 16 pages.

### Page 2

Downloaded from hlayiso.com
2                MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)           (EC/SEPTEMBER 2018)

 QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)

 1.1    D9                                                                                  (1)
 1.2    C9                                                                                  (1)
 1.3    D9                                                                                  (1)
 1.4    D9                                                                                  (1)
 1.5    D9                                                                                  (1)
 1.6    B9                                                                                  (1)
                                                                                            [6]

 QUESTION 2: SAFETY (GENERIC)

 2.1    Unsafe conditions:
        x Working at unsafe speeds. 3
        x Grinding without goggles. 3
        x Fooling and playing around workshop. 3
        x Spilling liquids on floor. 3
        x Lubricating/cleaning moving parts. 3
        x Wearing loose clothing near moving parts. 3
        x Grinding on the side of the grinding wheel. 3                     (Any 4 x 1)     (4)

 2.2    Assessing a first aid situation:
        x  Environmental observation. 3
        x  Visible signs and symptoms. 3
        x  Indicators to diagnosis. 3
        x  Vital functions. 3
        x  Stopping any serious bleeding. 3
        x  Immediate treatment of cardiac arrest. 3                          (Any 2 x 1)    (2)

 2.3    2.3.1    Advantages of product layout:
                 x Handling of material is limited to a minimum. 3
                 x Time period of manufacturing cycle is less. 3
                 x Production control is almost automatic. 3
                 x Greater use of unskilled labour is possible. 3
                 x Less total inspection is required. 3
                 x Less total floor space is needed per unit of production. 3(Any 2 x 1)        (2)

        2.3.2    Advantages of the process layout of machines
                 x High machine utilisation because more than one product is
                   manufactured. 3
                 x Better supervision as a result of subdivision of processes. 3
                 x Less interruption in flow of work when machines become
                   defective. 3
                 x Lower equipment cost, since one machine can produce more than
                   one product. 3
                 x Better control of total manufacturing cost. 3
                 x Greater flexibility in the production process. 3         (Any 2 x 1)      (2)
                                                                                            [10]

Copyright reserved                                                             Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                    3

 QUESTION 3: MATERIALS (GENERIC)

 3.1    Purpose of case-hardening.
        The objective is to produce a hard case over a tough core. 33                          (2)

 3.2    Factors of hardness.
        x Work piece size 3
        x Quenching rate 3
        x Carbon content 3                                                                     (3)

 3.3    Four kinds of quenching mediums.
        x Water and salt (brine) 3
        x Tap water 3
        x Liquid salts 3
        x Molten lead 3
        x Soluble oil and water 3
        x Oil 3                                                            (Any 4 x 1)         (4)

 3.4    Reason for hardened steel to be tempered:
        To reduce brittleness 3 and to give the workpiece a more fine-grained
        structure 3                                                                            (2)

 3.5    Test on materials:

        Type of Test           Mild Steel          High Speed Steel      Cast Iron
        Sound Test       Medium metallic sound 3   Low ring sound 3     Dull sound 3           (3)
                                                                                              [14]

 QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)

 4.1    D9                                                                                     (1)

 4.2    C9                                                                                     (1)

 4.3    B9                                                                                     (1)

 4.4    D9                                                                                     (1)

 4.5    A9                                                                                     (1)

 4.6    C9                                                                                     (1)

 4.7    B9                                                                                     (1)

 4.8    B9                                                                                     (1)

 4.9    A9                                                                                     (1)

 4.10 B 9                                                                                      (1)

 4.11 D 9                                                                                      (1)

 4.12 D 9                                                                                      (1)

Copyright reserved                                                         Please turn over

### Page 4

Downloaded from hlayiso.com
4                MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)   (EC/SEPTEMBER 2018)

 4.13   B9                                                                      (1)

 4.14   D9                                                                      (1)
                                                                               [14]

Copyright reserved                                                    Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)       MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                    5

 QUESTION 5: TERMINOLOGY (TEMPLATES, ROLLING AND BENDING)
             (SPECIFIC)

 5.1    Advantages of lattice girders:
        Lattice girders tend to be very rigid 3 and give good strength to weight ratios
        over long spans. 3                                                                       (2)

 5.2    Calculation on basketball hoop:

        Mean Ø = Outside Ø – Bar thickness

        Mean Ø = Inside Ø + Plate thickness

        Mean Ø = 380 + 16 mm

                     = 396 mm

        Mean circumference = ߨൈ݉݁ܽ݊ߠ3

                               = ߨൈ͵ͻ͸3

                               = 1 244,23 3

                                = 1 244 mm 3                                                     (4)

 5.3    Weld symbol:

                           3

                      3                                                                          (2)

 5.4    Template loft:
        It is a very important section of a structural workshop, 3 usually away from the
        main workshop where quietness and better light facilities are available. 3               (2)

 5.5    Purpose of purlins:
        To support the roof coverings 33                                                         (2)

 5.6    Sketches of different templates:

        5.6.1    Flange template

                                               333                                               (3)

Copyright reserved                                                            Please turn over

### Page 6

Downloaded from hlayiso.com
6                MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)   (EC/SEPTEMBER 2018)

        5.6.2    Strip template

                                         333                                            (3)

        5.6.3    Web template

                                       333                                              (3)

 5.7    Basic principles of marking-off:
        x Measure accurately 3
        x Show all detail 3
        x Scribe lines must be clearly visible
        x Use a prick punch to make lines clearer and permanent     (Any 2 x 1)     (2)
                                                                                   [23]

Copyright reserved                                                    Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                         7

 QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC)

 6.1 6.1.1      Bench grinder 3

                Function:
                It is used to drive abrasive wheels, which hand grind cutting tools and
                perform other rough grinding. 3                                                   (2)

       6.1.2    Power-driven guillotine 3

                Function:
                To cut plates. 3                                                                  (2)

       6.1.3    Power saw 3

                Function:
                It is used to roughly cut large sections of metal before they are further
                machined or used in manufacturing. 3                                              (2)

       6.1.4    Pedestal drill press 3

                Function:
                Used to drill a wide variety of materials including ferrous and non-ferrous
                metals and composite plastics. 3                                                  (2)

       6.1.5    Hydraulic press 3

                Function:
                To install or remove components, such as bearings or bushes, in
                mechanical devices 3                                                              (2)

       6.1.6    Oxy- acetylene equipment: 3

                Function:
                To enable gas welding or cutting, by means of the oxy-acetylene flame 3           (2)

 6.2 Drill bit sizes

       6.2.1    8 mm        6, 8 mm to be drilled 3                                               (1)

       6.2.2    10 mm        8, 5 mm to be drilled 3                                              (1)

 6.3 Power saw

       The blade is tensioned in the frame and cuts in a forward and backwards
       (reciprocating) motion similar to that of a hacksaw. 3                                     (1)

 6.4 Type of roller

       Pyramid bending rolls 3                                                                    (1)

Copyright reserved                                                            Please turn over

### Page 8

Downloaded from hlayiso.com
8                MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)          (EC/SEPTEMBER 2018)

 6.5 Cutting limitations of plasma cutters:

       Hand held torches can cut up to 38 mm thick 3
       Computer controlled torches can cut up to 150 mm thick plates 3                     (2)
                                                                                          [18]

Copyright reserved                                                           Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                   9

QUESTION 7: FORCES (SPECIFIC)

7.1    7.1.1    RR: RL X 8 = (10 x 2) + ( (6 x 5) 3
                           = 20 + 30
                           = 50 3
                      RL = 6,25 N3

                RL: RR X 8 = (6 x 3) + (10 x 6) 3
                            = 18 + 60
                            = 78 3
                         RR = 9,75 N 3                                                   (6)

                                                           10 N

                                                       B
                                               6N

                                                                      C
                                                       G
                             A
                                                                  H
                                                   F
                                  E

                          2000              2000              4000

                RL                                     D                     RR

                                            DIAGRAM 7.1

Copyright reserved                                                        Please turn over

### Page 10

Downloaded from hlayiso.com
10               MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)            (EC/SEPTEMBER 2018)

       7.1.2

                                              3                                  3

                         3
                                                           3
                                                                                    3

                                         3

                         3                        3

                                                                                3
                                                                     3

                                                                                            (10)

7.2    Definitions:

       Strain: Is the ratio between the change in length and the original length and is
               expressed as a constant. 33                                                       (2)

       Stress: It is an external force applied to an object. Force per unit area. 33             (2)

Copyright reserved                                                             Please turn over

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)        MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                11

7.3    Stress =
                   ௅௢௔ௗ
                          3
                   ஺௥௘௔
                   ଺଴௑ଵ଴య
               =      రఱ೉రఱ   33
                       భబల

                     ଺଴௑ଵ଴య ௑ଵ଴ల
               =                            3
                          ସହ௑ସହ

                   ଺଴௑ଵ଴వ
               =                3
                      ଶ଴ଶହ

               = 29 629 629,63 Pa 3
                                 OR

              = 29,63 MPa
                       ௌ்ோாௌௌ
             E =                    3
                       ௌ்ோ஺ூே

                   ଶଽ଺ଶଽ଺ଶଽǡ଺ଷ
               =                        3
                      ଵହ଴௑ଵ଴వ

       Strain = 1,975308 x ͳͲିଷ 3
                                    ஼ு஺ேீாூே௅ாேீ்ு
                   STRAIN =                               3
                                        ைோூீூே஺௅௅ாேீ்ு

                                = 1,975308 x ͳͲିସ x 2 m 3

       Change in Length = 3,95 X ͳͲିସ3

                                    = 0,395 mm 3                                          (13)
                                                                                          [33]

Copyright reserved                                                          Please turn over

### Page 12

Downloaded from hlayiso.com
12               MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)               (EC/SEPTEMBER 2018)

 QUESTION 8: JOINING METHODS (SPECIFIC)

 8.1    Non-destructive tests:
        x  Liquid dye penetrant test 3
        x  X-Ray test 3
        x  Ultrasonic test 3                                                                        (3)

 8.2    Nick-break test:
       x Make a hacksaw cut through the centre of the weld. 3
       x Cut should be about 6,5 mm deep. 3
       x Place the saw-nicked specimen on two steel supports. 3
       x Use a sledgehammer to break the specimen by striking it in the zone where
         you made the saw cuts. 3
       x The weld metal exposed in the break should be completely fused and should
         be free from slag inclusions and contain no gas pockets greater than 1,6 mm.3
       x There should be not more than one pore or gas pocket per square centimetre.                (5)

 8.3    Factors of a good arc:
        x The surface condition 3
        x The travel speed 3
        x The welding current 3
        x The arc voltage 3
        x The angle of the torch/electrode/shroud                                (Any 4 x 1)        (4)

 8.4    Welding defects:
        x Incomplete penetration 3
        x Lack of fusion 3
        x Porosity 3
        x Undercutting 3
        x Distortion
        x Cracks
        x Spatter
        x Slag inclusion                                                          (Any 4 x 1)       (4)

 8.5    Methods to reduce stress:
        Peening 3
        Controlled heating, followed by controlled cooling 3                                        (2)

 8.6    Welding spatter:
        It is the little droplets of molten material that are generated at or near the welding
        arc. 33
        It is generally regarded as a nuisance and is a critical factor to consider when
        developing an application.                                                                  (2)

 8.7    Cause of spatter:
        A disturbance in the molten weld pool during the transfer of wire into the
        weld, 3caused by voltage being too low or amperage being too high. 3                        (2)

 8.8    Oxy-acetylene mild steel flame:
        Neutral flame 3                                                                           (1)
                                                                                                 [23]
Copyright reserved                                                                 Please turn over

### Page 13

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                     13

 QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC)

 9.1

                                                        333                                (9)

                              333
        333

 9.2    Types of cracks:
        HAZ(Heat affected zone)cracks 3
        Centre line cracks 3
        Crater cracks 3
        Transverse cracks 3                                                                (4)

 9.3    Criteria for free bend test:
        It measures the ductility of the weld deposit and the heat affected area
        adjacent to the weld. 3
        It is used to determine the percentage of elongation of the weld metal. 3          (2)

 9.4    Advantages of liquid dye over X-ray or ultra-sonic test:
        x Good for ferrous and non-ferrous metals 3
        x Low cost 3
        x Easy to apply and interpret 3
        x Minimal training required                                         (Any 3 x 1)    (3)

Copyright reserved                                                          Please turn over

### Page 14

Downloaded from hlayiso.com
14               MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)         (EC/SEPTEMBER 2018)

 QUESTION 10: MAINTENANCE (SPECIFIC)

 10.1   Results of a lack of lubrication:
        Overloading 3
        Friction 3                                                                       (2)

 10.2   Definition of friction:
        Rubbing of one part 3 against another 3                                          (2)

 10.3   Overloading:
        Excessive loads on machine parts 3
        Running a machine or device at a rate higher than at which it was designed
        to operate 3                                                                     (2)

 10.4   Consequences of overloading –guillotine:
        Cutting plate of excessive thickness or hardness will damage both the
        blade 3and hydraulic system, resulting in costly damage 3                        (2)
                                                                                         [8]

Copyright reserved                                                          Please turn over

### Page 15

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                       15

 QUESTION 11: TERMINOLOGY (DEVELOPMENT) (SPECIFIC)

 11.1

         11.1.1        A – B : (1 – 2) =
                                            ௡௑ଷ଴
                                                     3
                                             ଵଶ
                        ͻͶǡʹ͸
                       = ͳʹ 3

                       = 7,85 3                                                                   (3)

         11.1.2        (A – 1) : X – 1 = ඥሺ‫ ݔ݋‬െ ܴሻଶ ൅ ݄ଶ 3
                                           = ඥሺͶͷ െ ͳͷሻଶ ൅ ͷͲଶ 3
                                           = 73,65 3                                              (3)

         11.1.3        (1 – a)      = ඥሺ͵͹ǡͷଶ ൅ ͵ʹଶ ൅  ͷͲଶ 33
                                    = 70,2 33                                                     (4)

         11.1.4        2–a         = ඥሺͶͷ െ ͳͷ‫Ͳ͵ݏ݋ܥ‬଴ + (45 – 15 Sin ͵Ͳ଴ + ͷͲଶ 3
                                   = ඥሺ͵ʹଶ + ͵͹ǡͷଶ + ͷͲଶ ሻ 3
                                   = ඥͶͻ͵Ͳǡʹͷ 3
                                   = 70,2 3                                                       (4)

         11.1.5        a - 3 = ඥሺͶͷ െ ͳͷ‫Ͳ͵ݏ݋ܥ‬଴ + (45 – 15 Sin ͵Ͳ଴ + ͷͲଶ ሻ 3
                                = ඥሺ͵ʹଶ + ͵͹ǡͷଶ + ͷͲଶ ሻ 3
                                = ඥͶͻ͵Ͳǡʹͷ 3
                                = 70,2 3                                                          (4)

Copyright reserved                                                             Please turn over

### Page 16

Downloaded from hlayiso.com
16                 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)      (EC/SEPTEMBER 2018)

                                       3                       3
                                           3   3           3
                                                       3
                                                   3

                              3        3                           3
               3                                               3                     3

                                                                        3
                          3
                                                                                             (15)
                                                                                             [33]

                                                                              TOTAL:         200

Copyright reserved                                                          Please turn over

## Related documents

- [MECHANICAL TECH (Welding) GR12 MEMO SEPT2018 Afr](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept2018-afr/d74666de-06b9-446d-98ca-94cade40ab22) — Mechanical Technology · Memo · 2018 · Afr
- [MECHANICAL TECH (Welding) GR12 MEMO SEPT2018 Afr D](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept2018-afr-d/0b0b899c-4ee4-4ee8-898e-bdae811e67f4) — Mechanical Technology · Memo · 2018 · Afr
- [MECHANICAL TECH (Welding) GR12 MEMO SEPT 2018 English](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept-2018-english/1b0b4dd6-b53e-485d-9068-6f378eb8c9f3) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Welding) GR12 QP SEPT 2018 Afrikaans](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-qp-sept-2018-afrikaans/c1024fd4-200a-4d46-9c99-f73e378081f6) — Mechanical Technology · QP · 2018 · Afr
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 Eng D](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-eng-d/755d4907-fba9-478a-9a6d-cded15048da7) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 Afr D](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-afr-d/3f2fad2e-2e8e-494d-b250-7a3f03f1b1e3) — Mechanical Technology · Memo · 2018 · Afr

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Memo · 2023 · Afr
- [MECH TECH GR12 MEMO SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1) — Memo · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
