# Mechanical Technology Grade 12 2018 Memo (Eng)

> Grade 12 Mechanical Technology memorandum from the Welding And Metal Work 2018 (English), 16 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept-2018-english/1b0b4dd6-b53e-485d-9068-6f378eb8c9f3
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Language: English
- Document type: Memorandum
- Year: 2018
- Exam period: Welding And Metal Work
- Curriculum: CAPS
- Pages: 16

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 2018 Memo (Eng)](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept-2018-english/1b0b4dd6-b53e-485d-9068-6f378eb8c9f3)

## About this document

Mechanical Technology · Grade 12 · Welding and Metal Work · 2018 · English. Memorandum, 16 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                         NATIONAL
                    SENIOR CERTIFICATE

                         GRADE 12

                     SEPTEMBER 2018

  MECHANICAL TECHNOLOGY: WELDING AND
              METAL WORK
          MARKING GUIDELINE

MARKS:   200

               This marking guideline consists of 16 pages.

### Page 2

Downloaded from hlayiso.com
2                MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)           (EC/SEPTEMBER 2018)

 QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)

 1.1    D✓                                                                                  (1)
 1.2    C✓                                                                                  (1)
 1.3    D✓                                                                                  (1)
 1.4    D✓                                                                                  (1)
 1.5    D✓                                                                                  (1)
 1.6    B✓                                                                                  (1)
                                                                                            [6]

 QUESTION 2: SAFETY (GENERIC)

 2.1    Unsafe conditions:
        • Working at unsafe speeds. 
        • Grinding without goggles. 
        • Fooling and playing around workshop. 
        • Spilling liquids on floor. 
        • Lubricating/cleaning moving parts. 
        • Wearing loose clothing near moving parts. 
        • Grinding on the side of the grinding wheel.                      (Any 4 x 1)     (4)

 2.2    Assessing a first aid situation:
        •  Environmental observation. 
        •  Visible signs and symptoms. 
        •  Indicators to diagnosis. 
        •  Vital functions. 
        •  Stopping any serious bleeding. 
        •  Immediate treatment of cardiac arrest.                           (Any 2 x 1)    (2)

 2.3    2.3.1    Advantages of product layout:
                 • Handling of material is limited to a minimum. 
                 • Time period of manufacturing cycle is less. 
                 • Production control is almost automatic. 
                 • Greater use of unskilled labour is possible. 
                 • Less total inspection is required. 
                 • Less total floor space is needed per unit of production. (Any 2 x 1)        (2)

        2.3.2    Advantages of the process layout of machines
                 • High machine utilisation because more than one product is
                   manufactured. 
                 • Better supervision as a result of subdivision of processes. 
                 • Less interruption in flow of work when machines become
                   defective. 
                 • Lower equipment cost, since one machine can produce more than
                   one product. 
                 • Better control of total manufacturing cost. 
                 • Greater flexibility in the production process.          (Any 2 x 1)      (2)
                                                                                            [10]

Copyright reserved                                                             Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                    3

 QUESTION 3: MATERIALS (GENERIC)

 3.1    Purpose of case-hardening.
        The objective is to produce a hard case over a tough core.                           (2)

 3.2    Factors of hardness.
        • Work piece size 
        • Quenching rate 
        • Carbon content                                                                      (3)

 3.3    Four kinds of quenching mediums.
        • Water and salt (brine) 
        • Tap water 
        • Liquid salts 
        • Molten lead 
        • Soluble oil and water 
        • Oil                                                             (Any 4 x 1)         (4)

 3.4    Reason for hardened steel to be tempered:
        To reduce brittleness  and to give the workpiece a more fine-grained
        structure                                                                             (2)

 3.5    Test on materials:

        Type of Test           Mild Steel          High Speed Steel      Cast Iron
        Sound Test       Medium metallic sound    Low ring sound      Dull sound            (3)
                                                                                              [14]

 QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)

 4.1    D✓                                                                                     (1)

 4.2    C✓                                                                                     (1)

 4.3    B✓                                                                                     (1)

 4.4    D✓                                                                                     (1)

 4.5    A✓                                                                                     (1)

 4.6    C✓                                                                                     (1)

 4.7    B✓                                                                                     (1)

 4.8    B✓                                                                                     (1)

 4.9    A✓                                                                                     (1)

 4.10 B ✓                                                                                      (1)

 4.11 D ✓                                                                                      (1)

 4.12 D ✓                                                                                      (1)

Copyright reserved                                                         Please turn over

### Page 4

Downloaded from hlayiso.com
4                MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)   (EC/SEPTEMBER 2018)

 4.13   B✓                                                                      (1)

 4.14   D✓                                                                      (1)
                                                                               [14]

Copyright reserved                                                    Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)     MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                      5

 QUESTION 5: TERMINOLOGY (TEMPLATES, ROLLING AND BENDING)
             (SPECIFIC)

 5.1    Advantages of lattice girders:
        Lattice girders tend to be very rigid  and give good strength to weight ratios
        over long spans.                                                                        (2)

 5.2    Calculation on basketball hoop:

        Mean Ø = Outside Ø – Bar thickness

        Mean Ø = Inside Ø + Plate thickness

        Mean Ø = 380 + 16 mm

                     = 396 mm

        Mean circumference = 𝜋 × 𝑚𝑒𝑎𝑛 𝜃

                             = 𝜋 × 396

                             = 1 244,23 

                                = 1 244 mm                                                      (4)

 5.3    Weld symbol:

                        
                        
                                                                                               (2)
                       
 5.4    Template loft:
                      
        It is a very important section of a structural workshop,  usually away from the
        main workshop where quietness and better light facilities are available.                (2)

 5.5    Purpose of purlins:
        To support the roof coverings                                                          (2)

 5.6    Sketches of different templates:

        5.6.1    Flange template

                                                                                              (3)

Copyright reserved                                                            Please turn over

### Page 6

Downloaded from hlayiso.com
6                MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)   (EC/SEPTEMBER 2018)

        5.6.2    Strip template

                                                                                     (3)

        5.6.3    Web template

                                                                                     (3)

 5.7    Basic principles of marking-off:
        • Measure accurately 
        • Show all detail 
        • Scribe lines must be clearly visible
        • Use a prick punch to make lines clearer and permanent     (Any 2 x 1)     (2)
                                                                                   [23]

Copyright reserved                                                    Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                         7

 QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC)

 6.1 6.1.1      Bench grinder 

                Function:
                It is used to drive abrasive wheels, which hand grind cutting tools and
                perform other rough grinding.                                                    (2)

       6.1.2    Power-driven guillotine 

                Function:
                To cut plates.                                                                   (2)

       6.1.3    Power saw 

                Function:
                It is used to roughly cut large sections of metal before they are further
                machined or used in manufacturing.                                               (2)

       6.1.4    Pedestal drill press 

                Function:
                Used to drill a wide variety of materials including ferrous and non-ferrous
                metals and composite plastics.                                                   (2)

       6.1.5    Hydraulic press 

                Function:
                To install or remove components, such as bearings or bushes, in
                mechanical devices                                                               (2)

       6.1.6    Oxy- acetylene equipment: 

                Function:
                To enable gas welding or cutting, by means of the oxy-acetylene flame            (2)

 6.2 Drill bit sizes

       6.2.1    8 mm        6, 8 mm to be drilled                                                (1)

       6.2.2    10 mm        8, 5 mm to be drilled                                               (1)

 6.3 Power saw

       The blade is tensioned in the frame and cuts in a forward and backwards
       (reciprocating) motion similar to that of a hacksaw.                                      (1)

 6.4 Type of roller

       Pyramid bending rolls                                                                     (1)

Copyright reserved                                                            Please turn over

### Page 8

Downloaded from hlayiso.com
8                MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)          (EC/SEPTEMBER 2018)

 6.5 Cutting limitations of plasma cutters:

       Hand held torches can cut up to 38 mm thick 
       Computer controlled torches can cut up to 150 mm thick plates                      (2)
                                                                                          [18]

Copyright reserved                                                           Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                   9

QUESTION 7: FORCES (SPECIFIC)

7.1    7.1.1    RR: RL X 8 = (10 x 2) + ( (6 x 5) 
                           = 20 + 30
                           = 50 
                      RL = 6,25 N

                RL: RR X 8 = (6 x 3) + (10 x 6) 
                            = 18 + 60
                            = 78 
                         RR = 9,75 N                                                    (6)

                                                           10 N

                                                       B
                                               6N

                                                                      C
                                                       G
                             A
                                                                  H
                                                   F
                                  E

                          2000              2000              4000

                RL                                     D                     RR

                                            DIAGRAM 7.1

Copyright reserved                                                        Please turn over

### Page 10

Downloaded from hlayiso.com
10               MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)            (EC/SEPTEMBER 2018)

       7.1.2

                                                                                

                         
                                                           
                                                                                    

                                         

                                                 

                                                                                
                                                                     

                                                                                            (10)

7.2    Definitions:

       Strain: Is the ratio between the change in length and the original length and is
               expressed as a constant.                                                        (2)

       Stress: It is an external force applied to an object. Force per unit area.              (2)

Copyright reserved                                                             Please turn over

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)        MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                11

7.3                𝐿𝑜𝑎𝑑
       Stress = 𝐴𝑟𝑒𝑎 
                   60 𝑋 103
               =      45 𝑋 45   
                       106

                     60 𝑋 103 𝑋 106
               =                            
                          45 𝑋 45

                   60 𝑋 109
               =                
                      2025

               = 29 629 629,63 Pa 
                                 OR

              = 29,63 MPa
                       𝑆𝑇𝑅𝐸𝑆𝑆
             E =                    
                       𝑆𝑇𝑅𝐴𝐼𝑁

                   29 629 629,63
               =                        
                      150 𝑋 109

       Strain = 1,975308 x 10−3 
                                    𝐶𝐻𝐴𝑁𝐺𝐸 𝐼𝑁 𝐿𝐸𝑁𝐺𝑇𝐻
                   STRAIN = 𝑂𝑅𝐼𝐺𝐼𝑁𝐴𝐿 𝐿𝐸𝑁𝐺𝑇𝐻 

                                = 1,975308 x 10−4 x 2 m 

       Change in Length = 3,95 X 10−4

                                    = 0,395 mm                                           (13)
                                                                                          [33]

Copyright reserved                                                          Please turn over

### Page 12

Downloaded from hlayiso.com
12               MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)               (EC/SEPTEMBER 2018)

 QUESTION 8: JOINING METHODS (SPECIFIC)

 8.1    Non-destructive tests:
        •  Liquid dye penetrant test 
        •  X-Ray test 
        •  Ultrasonic test                                                                         (3)

 8.2    Nick-break test:
       • Make a hacksaw cut through the centre of the weld. 
       • Cut should be about 6,5 mm deep. 
       • Place the saw-nicked specimen on two steel supports. 
       • Use a sledgehammer to break the specimen by striking it in the zone where
         you made the saw cuts. 
       • The weld metal exposed in the break should be completely fused and should
         be free from slag inclusions and contain no gas pockets greater than 1,6 mm.
       • There should be not more than one pore or gas pocket per square centimetre.                (5)

 8.3    Factors of a good arc:
        • The surface condition 
        • The travel speed 
        • The welding current 
        • The arc voltage 
        • The angle of the torch/electrode/shroud                                (Any 4 x 1)        (4)

 8.4    Welding defects:
        • Incomplete penetration 
        • Lack of fusion 
        • Porosity 
        • Undercutting 
        • Distortion
        • Cracks
        • Spatter
        • Slag inclusion                                                          (Any 4 x 1)       (4)

 8.5    Methods to reduce stress:
        Peening 
        Controlled heating, followed by controlled cooling                                         (2)

 8.6    Welding spatter:
        It is the little droplets of molten material that are generated at or near the welding
        arc. 
        It is generally regarded as a nuisance and is a critical factor to consider when
        developing an application.                                                                  (2)

 8.7    Cause of spatter:
        A disturbance in the molten weld pool during the transfer of wire into the
        weld, caused by voltage being too low or amperage being too high.                         (2)

 8.8    Oxy-acetylene mild steel flame:
        Neutral flame                                                                            (1)
                                                                                                 [23]
Copyright reserved                                                                 Please turn over

### Page 13

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                     13

 QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC)

 9.1

                                                                                        (9)

                              
        

 9.2    Types of cracks:
        HAZ(Heat affected zone)cracks 
        Centre line cracks 
        Crater cracks 
        Transverse cracks                                                                 (4)

 9.3    Criteria for free bend test:
        It measures the ductility of the weld deposit and the heat affected area
        adjacent to the weld. 
        It is used to determine the percentage of elongation of the weld metal.           (2)

 9.4    Advantages of liquid dye over X-ray or ultra-sonic test:
        • Good for ferrous and non-ferrous metals 
        • Low cost 
        • Easy to apply and interpret 
        • Minimal training required                                         (Any 3 x 1)    (3)

Copyright reserved                                                          Please turn over

### Page 14

Downloaded from hlayiso.com
14               MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)         (EC/SEPTEMBER 2018)

 QUESTION 10: MAINTENANCE (SPECIFIC)

 10.1   Results of a lack of lubrication:
        Overloading 
        Friction                                                                        (2)

 10.2   Definition of friction:
        Rubbing of one part  against another                                           (2)

 10.3   Overloading:
        Excessive loads on machine parts 
        Running a machine or device at a rate higher than at which it was designed
        to operate                                                                      (2)

 10.4   Consequences of overloading –guillotine:
        Cutting plate of excessive thickness or hardness will damage both the
        blade and hydraulic system, resulting in costly damage                         (2)
                                                                                         [8]

Copyright reserved                                                          Please turn over

### Page 15

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)    MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)                       15

 QUESTION 11: TERMINOLOGY (DEVELOPMENT) (SPECIFIC)

 11.1

         11.1.1                            𝑛 𝑋 30
                       A – B : (1 – 2) =            
                                             12
                        94,26
                       = 12 

                       = 7,85                                                                    (3)

         11.1.2        (A – 1) : X – 1 = √(𝑜𝑥 − 𝑅)2 + ℎ2 
                                           = √(45 − 15)2 + 502 
                                           = 73,65                                               (3)

         11.1.3        (1 – a)     = √(37,52 + 322 + 502 
                                   = 70,2                                                       (4)

         11.1.4        2–a         = √(45 − 15 𝐶𝑜𝑠300 + (45 – 15 Sin 300 + 502 
                                   = √(322 + 37,52 + 502 ) 
                                   = √4930,25 
                                   = 70,2                                                        (4)

         11.1.5        a - 3 = √(45 − 15 𝐶𝑜𝑠300 + (45 – 15 Sin 300 + 502 ) 
                                = √(322 + 37,52 + 502 ) 
                                = √4930,25 
                                = 70,2                                                           (4)

Copyright reserved                                                             Please turn over

### Page 16

Downloaded from hlayiso.com
16                 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK)      (EC/SEPTEMBER 2018)

                                                              
                                                         
                                                       
                                                   

                                                                 
                                                                                   

                                                                        
                          
                                                                                             (15)
                                                                                             [33]

                                                                              TOTAL:         200

Copyright reserved                                                          Please turn over

## Related documents

- [MECHANICAL TECH (Auto) MEMO SEPT 2018 English](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-english/b985e4dd-9a08-4ec2-a07b-64edd6f727ea) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Welding) GR12 MEMO SEPT2018 Afr](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept2018-afr/d74666de-06b9-446d-98ca-94cade40ab22) — Mechanical Technology · Memo · 2018 · Afr
- [MECHANICAL TECH (Welding) GR12 MEMO SEPT2018 Afr D](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept2018-afr-d/0b0b899c-4ee4-4ee8-898e-bdae811e67f4) — Mechanical Technology · Memo · 2018 · Afr
- [MECH TECH GR12 MEMO SEPT 2020 Auto English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept-2020-auto-english/9066fed3-db75-4436-9ea3-0a432f99cc0b) — Mechanical Technology · Memo · 2020 · Eng
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 Eng D](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-eng-d/755d4907-fba9-478a-9a6d-cded15048da7) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 Afr D](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-afr-d/3f2fad2e-2e8e-494d-b250-7a3f03f1b1e3) — Mechanical Technology · Memo · 2018 · Afr

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [MECH TECH GR12 QP SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept2023-welding-english/49e9215c-dc78-48c3-a526-4baaf59158d8) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — QP · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
