# Mechanical Technology Grade 12 NSC Supplementary 2018 Memo

> Grade 12 Mechanical Technology memorandum from the NSC Supplementary Exam 2018 (English), 21 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechanical-technology-feb-march-2018-memo-eng/decc58c7-0e14-411e-b52f-e6dec3f19f95
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2018
- Exam period: NSC Supplementary Exam
- Curriculum: CAPS
- Pages: 21

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 NSC Supplementary 2018 Memo](https://www.hlayiso.com/library/mechanical-technology-feb-march-2018-memo-eng/decc58c7-0e14-411e-b52f-e6dec3f19f95)

## About this document

Mechanical Technology · Grade 12 · NSC Supplementary Exam · 2018. Memorandum, 21 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                                   NATIONAL
                              SENIOR CERTIFICATE

                                       GRADE 12

                           MECHANICAL TECHNOLOGY

                             FEBRUARY/MARCH 2018

                               MARKING GUIDELINES

MARKS: 200

                      These marking guidelines consist of 21 pages.

Copyright reserved                                                    Please turn over

### Page 2

Downloaded from hlayiso.com
Mechanical Technology                   2               DBE/Feb.–Mar. 2018
                             NSC – Marking Guidelines

QUESTION 1: MULTIPLE-CHOICE QUESTIONS

1.1       C                                                              (1)

1.2       C                                                              (1)

1.3       B                                                              (1)

1.4       D                                                              (1)

1.5       C                                                              (1)

1.6       D                                                              (1)

1.7       A                                                              (1)

1.8       A                                                              (1)

1.9       A                                                              (1)

1.10      B                                                              (1)

1.11      A                                                              (1)

1.12      C                                                              (1)

1.13      B                                                              (1)

1.14      A                                                              (1)

1.15      D                                                              (1)

1.16      A                                                              (1)

1.17      C                                                              (1)

1.18      A                                                              (1)

1.19      B                                                              (1)

1.20      A                                                              (1)
                                                                          [20]

Copyright reserved                                          Please turn over

### Page 3

Downloaded from hlayiso.com
Mechanical Technology                           3                             DBE/Feb.–Mar. 2018
                                     NSC – Marking Guidelines

QUESTION 2: SAFETY

2.1      Spring tester
            Use correct attachments of the valve spring tester to compress 
              the spring. 
            Do not exceed the prescribed pressure. 
            Ensure that the spring does not slip out. 
                                                                        (ANY 2 x 1)                (2)

2.2      Welding helmet
            To protect your eyes against the dangerous ultra-violet rays. 
            To protect your skin against the dangerous ultra-violet rays. 
            To protect your eyes against the sparks. 
            To protect your skin against the sparks. 
                                                                          (ANY 1 x 1)           (1)

2.3      Spot welding
            To prevent the electrodes from overheating.                                       (1)

2.4      Testers

         2.4.1       Brinell tester
                        The tester must be mounted on the rigid spot on a workbench
                         
                        The force must be applied at an angle of 90° to the test piece
                         
                        Do not exceed the prescribed load 
                        Make sure the test piece is placed securely into position 
                                                                           (ANY 1 x 1)          (1)

         2.4.2       Tensile tester
                        Make sure all safety guards are in place 
                        Do not exceed the prescribed load 
                        See that the test piece is securely placed in position 
                        Make sure the dial indicator is mounted properly 
                                                                             (ANY 1 x 1)        (1)

         2.4.3       Torsion tester
                        Fasten the tester to the workbench 
                        When you add pieces of different mass, you should attach
                         them very gently otherwise you could get a skew reading of
                         the torsion on the rod 
                        Get specification (torsion) of the different materials and of the
                         size rods you would like test 
                                                                              (ANY 1 x 1)       (1)

2.5      Bearing puller
            Perpendicular or 90° to the bearing.                                              (1)

Copyright reserved                                                               Please turn over

### Page 4

Downloaded from hlayiso.com
Mechanical Technology                         4                        DBE/Feb.–Mar. 2018
                                   NSC – Marking Guidelines

2.6      Cylinder leakage tester

         2.6.1          To prevent damage to the seals and tester 
                        To ensure the correct reading 
                                                                       (ANY 1 x 1)       (1)

         2.6.2          To prevent damage to the tester and spark plug hole or
                         injector hole 
                        To ensure the correct reading 
                                                                    (ANY 1 x 1)          (1)
                                                                                         [10]

Copyright reserved                                                        Please turn over

### Page 5

Downloaded from hlayiso.com
Mechanical Technology                           5                            DBE/Feb.–Mar. 2018
                                     NSC – Marking Guidelines

QUESTION 3: TOOLS AND EQUIPMENT

3.1      Testers

         3.1.1       Cylinder leakage tester
                         Is used to determine a leakage in the cylinder.
                         Determine the volume of leakage                                     (2)

         3.1.2       Fuel pressure tester
                         Is used to test the fuel operating pressure in the system 
                         Is used to test the fuel pressure in the fuel line that runs to
                          the direct injection.                                               (2)

         3.1.3       Torsion tester
                        Is used to investigate the relationship between momentum or
                         torque applied to material 
                        Is used to investigate influence of material length on torsional
                         deflection.                                                          (2)

3.2      Reasons for high CO2 reading
            Lean fuel mixture setting 
            Low compression 
            Faulty high tension leads 
                                                                             (ANY 2 x 1)       (2)

3.3      MIGS/MAGS-welding

         3.3.1       Reasons for using inert gas during MIGS/MAGS welding
                       Stabilises the arc on the parent metal 
                       Shields the arc and weld pool from atmospheric gases like
                        oxygen                                                                (2)

         3.3.2       Advantages of MIGS/MAGS welding
                       Can weld in any position 
                       Less operator skill required 
                       Continuous welding can be done 
                       Causes less deformation 
                       Faster than arc welding 
                       Minimal post weld cleaning 
                       No slag removal is required 
                                                                             (ANY 2 x 1)       (2)
                                                                                               [12]

Copyright reserved                                                              Please turn over

### Page 6

Downloaded from hlayiso.com
Mechanical Technology                          6                          DBE/Feb.–Mar. 2018
                                    NSC – Marking Guidelines

QUESTION 4: MATERIALS

4.1      Characteristics of structures

         4.1.1       Austenite
                        Soft 
                        Coarse grain structure 
                        Non-magnetic 
                                                                          (ANY 2 x 1)       (2)

         4.1.2       Ferrite
                         Soft 
                         Ductile 
                         Magnetic 
                                                                          (ANY 2 x 1)       (2)

4.2      Iron-carbon equilibrium diagram

         4.2.1       Lower critical point (AC1) of steel
                       The structure starts to change                                   (2)

         4.2.2       Higher critical point (AC3) of steel
                        The structure turns into complete Austenite 
                        The steel completely loses its magnetic properties 
                        The structure turns into its finest grain size 
                                                                           (ANY 1 x 2)     (2)

4.3      Reasons to enhance properties of a crankshaft
            To produce a hard face with a tough core. 
            To induce toughness                                                           (2)

4.4      Reasons for the tempering of a camshaft
            To increase the lifespan of the camshaft 
            To eliminate brittleness caused by hardening. 
                                                                          (ANY 2 x 1)       (2)

4.5      Heat treatment process on piston rings
            Hardening                                                                     (1)

                                                                                           [13]

Copyright reserved                                                           Please turn over

### Page 7

Downloaded from hlayiso.com
Mechanical Technology                         7                   DBE/Feb.–Mar. 2018
                                   NSC – Marking Guidelines

QUESTION 5: TERMONOLOGY

5.1      Key dimensions

         5.1.1       The width of the key
                              D
                      Width 
                               4
                              120                
                            
                                4
                             30 mm                                                    (2)

         5.1.2       The thickness of the key
                                 D
                     Thickness 
                                 6
                               
                                 120             
                                  6
                                20 mm                                                 (2)

         5.1.3       The length of the key
                     Length  D  1.5            
                             120  1.5
                             180 mm                                                   (2)

5.2      Indexing
                    40
         Indexing 
                     n
                     40 2
                                                            
                    124 2
                    20                                        
                  
                    62
         No full turns and 20 holes in a 62 hole circle                                (3)

5.3      Height of screw the screw thread

              H  0.866 P
                 0.866  3           
                 2.6 mm                                                               (2)

Copyright reserved                                                   Please turn over

### Page 8

Downloaded from hlayiso.com
Mechanical Technology                          8                         DBE/Feb.–Mar. 2018
                                    NSC – Marking Guidelines

5.4      Gear terminology

         5.4.1       Addendum     =m
                                  = 3 mm                                                        (1)

         5.4.2       Dedendum     = 1,157 m            or        =1,25 m
                                  = 1,157 x 3                   =1,25 x 3 
                                  = 3,47 mm                     =3,75 mm                       (2)

         5.4.3       Clearance    = 0,157 m            or        =0,25m
                                  = 0,157 x 3                   =0,25 x 3 
                                  = 0,47 mm                     =0,75 mm                       (2)

         5.4.4              PCD
                     Module 
                              T
                      PCD  m  T        
                           3  48
                           144mm        
                                                                                                 (2)

         5.4.5       OD = PCD + 2m        
                        = 144 + 2(3)
                        = 144 + 6
                        = 150 mm                                                                (2)

         5.4.6       Cutting depth = 2,157 m          or        =2,25m         
                                   = 2,157 x 3                   =2,25 x 3
                                   = 6,47 mm                    =6,75 mm                       (2)

         5.4.7       Circular pitch = m x 𝜋     
                                    =3x𝜋
                                    = 9,42 mm                                                   (2)

5.5      Setting of the lathe and cutting tool to cut a metric V-screw thread:
             Set the lathe to the correct speed for screw cutting 
             Set the lead screw according to the required pitch 
             Set the dial gauge to position with the required worm gear 
             Set the compound slide to half the included angle of the thread (30°) 
             Set the cutting tool centre height and 90° to the work piece with the
              help of a centre gauge 
             Set cross slide and compound slide collars to zero with the tool
              touching the work piece                                                          (6)
                                                                                                [30]

Copyright reserved                                                           Please turn over

### Page 9

Downloaded from hlayiso.com
Mechanical Technology                          9                             DBE/Feb.–Mar. 2018
                                    NSC – Marking Guidelines

QUESTION 6: JOINING METHODS

6.1      Welding defects

         6.1.1       Slag inclusion
                        Welding speed too fast 
                        Not removing the slag from the previous weld run before
                         welding the next run 
                        Current too low 
                                                                     (ANY 2 x 1)                   (2)

         6.1.2       Incomplete penetrations
                        Welding speed too fast 
                        Faulty joint design 
                        Electrode too large 
                        Current too low 
                                                                           (ANY 2 x 1)             (2)

6.2      Atmospheric contamination during MIGS/MAGS welding
           Inadequate shielding gas flow 
           Excessive shielding gas flow 
           Severely clogged nozzle 
           Damaged gas supply system 
           Excessive wind in the welding area 
                                                                           (ANY 2 x 1)             (2)

6.3      Nick break test
            Make a hacksaw cut at both edges, through the centre of the weld 
            Place the saw-nicked specimen on two steel supports 
            Use a sledge hammer to break the specimen by striking it in the zone
             where you made the saw cuts 
            Defects like incomplete fusion, slag inclusion and brittleness will be
             exposed in the break 
            Any defects bring it to the attention to the welder to rectify it                    (5)

6.4      Reasons for destructive tests

         6.4.1       Bend test
                     To determine the ductility/elongation  of the weld metal.                   (2)

         6.4.2       Machinability test
                     To determine the welds hardness  and its strength.                          (2)

6.5      X-ray test
         To detect internal defects in the weld metal                                            (2)

Copyright reserved                                                              Please turn over

### Page 10

Downloaded from hlayiso.com
Mechanical Technology                        10                        DBE/Feb.–Mar. 2018
                                  NSC – Marking Guidelines

6.6      Weld crater

         Forms where welding is resumed at the bottom of the previous weld instead
         of on the top                                                                     (2)

6.7      MIGS/MAGS welding

         6.7.1       Welding process
                     MIGS/MAGS welding                                                      (1)

         6.7.2       Labelling
                     A. Parent metal 
                     B. Arc 
                     C. Electrode wire 
                     D. Gas shroud 
                     E. Shielding gas                                                       (5)
                                                                                             [25]

Copyright reserved                                                        Please turn over

### Page 11

Downloaded from hlayiso.com
Mechanical Technology                                11                              DBE/Feb.–Mar. 2018
                                          NSC – Marking Guidelines

QUESTION 7: FORCES

7.1      Resultant
                                                     210cos60°
                                                                 210 N

                                                                 210sin60°
                        190 N         190cos40°

                          190sin40°        40°         60°                   200 N

                                                    185 N

          ∑HC 200  210 cos 60 - 190 cos 40                                
                 200  105 - 145.55
                                                                                                          (4)
                 159,45 N

         ∑VC 210 sin 60  190 sin 40  185                                
                181,87  122,13  185
                                                                                                          (3)
                119 N

                                                      OR

           Horizontal                 Magnitudes            Vertical             Magnitudes
           components                                       components
           200N                       200 N                210NSin60 0      181,87N 
           210N                       105 N                190NSin40 0      122,13 N 
           190N Cos40 0               -145,45 N            -185 N           -185 N
           TOTAL                      159,45 N             TOTAL            119 N 

Copyright reserved                                                                      Please turn over

### Page 12

Downloaded from hlayiso.com
Mechanical Technology                         12                            DBE/Feb.–Mar. 2018
                                   NSC – Marking Guidelines

            E 2  HC 2  VC 2
            E  159,45 2  119 2                                        159,45N
            E  198,96 N                                                 36,74°
                                                                  119N
                                                                                                    (3)
                                                                             E
                  VC
         Tan θ                                               
                  HC
                     119
                
                   159,45
               36,73                                        
             E  198,96N 36,73south of west
                               OR
               36 44' minutes south of west                                                      (3)

Copyright reserved                                                               Please turn over

### Page 13

Downloaded from hlayiso.com
Mechanical Technology                              13                       DBE/Feb.–Mar. 2018
                                        NSC – Marking Guidelines

7.2      Stress and Strain

         7.2.1       Resistance area
                     A
                          
                        π D2  d 2                  
                              4

                      
                           
                        π 0,056 2  0,038 2   
                                  4
                                 3
                       1,33  10 m 2                                                            (2)

         7.2.2       Stress
                                 force         
                         Stress 
                                 area
                                  20 10 3
                        Stress                
                                 1,33 10 3
                               15037593,98 Pa
                        Stress  15,04 MPa                                                       (3)

         7.2.3       Strain
                                  Δl
                         Strain                     
                                 OL
                                 50 - 49 ,975        
                        Strain 
                                        50
                                 0 ,025
                        Strain 
                                    50
                                0 ,5  10 3                                                    (3)

         7.2.4       Young’s Modulus of Elasticity
                                                     Stress
                     Youngs Modulus of Elasticity                      
                                                     Strain
                                                     15,04 10 6        
                                                  Ε
                                                      0 ,5 10 3
                                                     30 ,08 10 9 Pa
                                                     30 ,08GPa                                  (3)

Copyright reserved                                                             Please turn over

### Page 14

Downloaded from hlayiso.com
Mechanical Technology                              14                   DBE/Feb.–Mar. 2018
                                        NSC – Marking Guidelines

7.3      Moments

7.3
             600 N               300 N                850 N
                        1,5 m              1,5 m

                                  3m                               3m
               A                                                              B

         Calculate B. Moments about A:
          LHM   RHM                                        
           B  6  300  1,5  850  3                  
               6 B 3000
                   
                6      6
                 B  500 N                                    

         Calculate A. Moments about B:
           RHM   LHM                                       
             A  6  850  3  300  4,5  600  6    
                6 A  2550  1350  3600
                6 A 7500
                    
                 6      6
                  A 1250 N                                   
                                                                                               (6)
                                                                                              [30]

Copyright reserved                                                         Please turn over

### Page 15

Downloaded from hlayiso.com
Mechanical Technology                         15                            DBE/Feb.–Mar. 2018
                                   NSC – Marking Guidelines

QUESTION 8: MAINTENANCE

8.1      Reason using SAE 20W50
         This to ensure that the oil is able to satisfy the operational  requirements
         over a range of temperature  from start-up to running hot.                               (2)

8.2      Maintain V-belt drive systems
            Check the contact surfaces of the pulley to prevent the belt from being
             damaged.
            Check the belt condition and replace if it is worn. 
            Correct installation procedure must be followed. 
            Belt drives should be well guarded to prevent foreign objects to come
             into contact with the belts and pulleys. 
            Keep guard mesh free of papers, rags, etc. that can cause insufficient
             air flow. 
            Check that the belt deflection is according to specification. 
            Store replacement belts in a cool, well ventilated place. 
            Correct alignment of pulleys. 
                                                                           (ANY 2 x 1)             (2)

8.3      Flash point
         It is the lowest temperature  at which the oil gives off vapours  which can
         ignite.                                                                                  (3)

8.4      Maintaining cutting fluid
            Avoid contamination of the cutting fluid by draining and regularly
             replacing it. 
            Always clean the machine's splash tray of metal cutting after use. 
            Regularly wipe cutting fluid splashes of machine parts. 
            Ensure that the sump is topped up from time to time and check that
             there is sufficient flow of cutting fluid to the cutting tool. 
                                                                              (ANY 2 x 1)          (2)

8.5      Functions of the clutch plate
            It provides friction between the flywheel and pressure plate. 
            It serves as a link between the clutch and the gearbox main shaft.                   (2)

8.6      Reasons for skimming the flywheel
            To remove the grooves caused by the clutch plate. 
            To ensure a full contact surface between the flywheel and the clutch
             plate. 
            To prolong the life of the clutch plate. 
                                                                     (ANY 2 x 1)                   (2)

Copyright reserved                                                              Please turn over

### Page 16

Downloaded from hlayiso.com
Mechanical Technology                        16                         DBE/Feb.–Mar. 2018
                                  NSC – Marking Guidelines

8.7      Properties of grease
            It must be water resistant, it must not mix with water 
            Prevents rust/corrosion 
            Good for load pressures 
            High melting point 
            Low freezing point 
            Prevent gumming 
            Be able to lubricate 
            High viscosity 
                                                                        (ANY 2 x 1)           (2)
                                                                                              [15]

Copyright reserved                                                         Please turn over

### Page 17

Downloaded from hlayiso.com
Mechanical Technology                               17              DBE/Feb.–Mar. 2018
                                         NSC – Marking Guidelines

QUESTION 9: SYSTEMS AND CONTROL

9.1      Gear drives

         9.1.1       Rotation frequency of input shaft
                     N A TB  TD  TF
                        
                     N F TA  TC  TE
                             TB  TD  TF  N F         
                      NA =
                                TA  TC  TE
                           36  46  80  160
                         =                              
                              20  18  42
                         = 1401,90 r/ min                                                (3)

         9.1.2       Velocity ratio
                            N
                       VR = A
                            NF
                                                       
                             1401,90
                        VR =
                               160
                           = 8,76:1                                                      (2)

Copyright reserved                                                     Please turn over

### Page 18

Downloaded from hlayiso.com
Mechanical Technology                               18              DBE/Feb.–Mar. 2018
                                         NSC – Marking Guidelines

9.2      Belt drives

         9.2.1       Rotation frequency of driver pulley
                     N DR×DDR =N DN×DDN
                                    N DN  DDN         
                           N DR =
                                       DDR
                                733,33×0,36
                               =                       
                                    0 ,24
                               = 2000r/ min                                              (3)

         9.2.2       Power transmitted
                         T  T πDn
                      P= 1 2
                              60
                         ( 360  90 ) π  0,36  733,33
                      P=                                    
                                       60
                       = 3732,20Watts
                       = 3,73 kW                                                         (2)

         9.2.3       Belt speed
                                       πDN
                     Belt speed      
                                        60
                                                            
                                       π  0 ,36  733,33
                                     
                                               60
                                      13,83m.s1                                        (2)

Copyright reserved                                                     Please turn over

### Page 19

Downloaded from hlayiso.com
Mechanical Technology                              19              DBE/Feb.–Mar. 2018
                                        NSC – Marking Guidelines

9.3      Hydraulics

         9.3.1       Fluid pressure
                           πD 2
                      AB =
                             4
                           π 0 ,04 2                   
                         =
                               4
                         =1,26×10 - 3 m 2              

                              F
                      PB =
                              AB                       
                              275
                         =                             
                           1,26×10 - 3
                         =218253,97 Pa
                          or                           
                         = 218,25 kPa                                                    (5)

         9.3.2       Diameter of piston B
                     PB = PA
                          F
                      PB  B
                          AB
                          F
                      AB  B                               
                          PB
                               5,56  10 3
                      AB 
                              218,25  10 3
                                                           
                      AB  25,48  10  3 m 2

                          πD 2
                      AB 
                           4
                           AB  4
                     DB 
                               π
                              25,48  10  3  4           
                          
                                     π
                           0,18 m
                          or                               
                           180 mm                                                       (4)

Copyright reserved                                                    Please turn over

### Page 20

Downloaded from hlayiso.com
Mechanical Technology                           20                 DBE/Feb.–Mar. 2018
                                     NSC – Marking Guidelines

9.4      ABS
         ABS prevents wheels from skidding  when breaking hard  in difficult
         conditions.                                                                     (2)

9.5      ECU
         Electronic Control Unit                                                        (1)

9.6      Traction Control
            Prevent wheels from spinning. 
            Improves road holding 
                                                                   (ANY 1 x 1)        (1)
                                                                                     [25]

Copyright reserved                                                    Please turn over

### Page 21

Downloaded from hlayiso.com
Mechanical Technology                        21                           DBE/Feb.–Mar. 2018
                                   NSC – Marking Guidelines

QUESTION 10: TURBINES

10.1     Reaction turbines
            Francis 
            Kaplan 
            Tyson 
            Gorlov                                                      (ANY 2 x 1)      (2)

10.2     Supercharger boost
         Boost refers to the increase in intake manifold pressure  that exceeds
         normal atmospheric pressure                                                      (2)

10.3     Blowers
            Roots 
            Centrifugal 
            Vane-type 
            Twin screw type 
                                                                          (ANY 2 x 1)      (2)

10.4     Gas turbine
         A = Clean air inlet 
         B = Compression 
         C = Combustion 
         D = Exhaust 
         E = Turbine 
         F = Combustion chamber                                                           (6)

10.5     Application of a gas turbine
            Jet engines 
            Naval ships 
            Hi-performance vehicles and boats 
            Generating electricity 
                                                                          (ANY 2 x 1)      (2)

10.6     Advantages of a gas turbine
            Less complex than internal combustion piston engines 
            Only one moving part (Common shaft for: compressor and turbine) 
            Operate at higher revolutions per minute               (ANY 2 x 1)           (2)

10.7     Waste gate
         A waste gate is a valve that diverts exhaust gases away from the turbine
         wheel  to regulate the turbine/compressor speed and boost.                      (2)

10.8     Oil cooler
         To cool the oil  that lubricates the turbocharger bearings and shaft.           (2)
                                                                                           [20]

                                                                              TOTAL:       200

Copyright reserved

## Related documents

- [Mechanical Technology Feb March 2018 Memo Afr](https://www.hlayiso.com/library/mechanical-technology-feb-march-2018-memo-afr/ff38a98a-516d-4d26-b5de-3f8554214a35) — Mechanical Technology · Memo · 2018 · Afr
- [Mechanical Technology Feb March 2018 Eng](https://www.hlayiso.com/library/mechanical-technology-feb-march-2018-eng/4240af0f-86fd-4c37-bd71-a5c4c769b35e) — Mechanical Technology · QP · 2018 · Eng
- [Mechanical Technology Feb March 2018 Afr](https://www.hlayiso.com/library/mechanical-technology-feb-march-2018-afr/5df7faf2-277f-4e96-b58e-b30ebda77666) — Mechanical Technology · QP · 2018 · Afr
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 Eng D](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-eng-d/755d4907-fba9-478a-9a6d-cded15048da7) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 Afr D](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-afr-d/3f2fad2e-2e8e-494d-b250-7a3f03f1b1e3) — Mechanical Technology · Memo · 2018 · Afr
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 Afrikaans](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-afrikaans/7f4dc60c-5288-4a1e-b8b0-d1750f26c19f) — Mechanical Technology · Memo · 2018 · Afr

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Memo · 2023 · Afr
- [MECH TECH GR12 MEMO SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1) — Memo · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
