# Mechanical Technology Grade 12 NSC June 2023 Memo (English)

> Grade 12 Mechanical Technology memorandum from the NSC June Exam 2023 (English), 21 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-mg-eng/f03288e3-d3c2-4c65-a019-d4693dd07869
- Updated: 2026-10-29
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2023
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 21

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 NSC June 2023 Memo (English)](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-mg-eng/f03288e3-d3c2-4c65-a019-d4693dd07869)

## About this document

Mechanical Technology · Grade 12 · NSC June Exam · 2023. Memorandum. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

             SENIOR CERTIFICATE EXAMINATIONS/
         NATIONAL SENIOR CERTIFICATE EXAMINATIONS

                     MECHANICAL TECHNOLOGY: AUTOMOTIVE

                                          2023

                                MARKING GUIDELINES

                                                                      MARKS: 200

                      These marking guidelines consist of 21 pages.

Copyright reserved                                                    Please turn over

### Page 2

Downloaded from hlayiso.com
Mechanical Technology: Automotive               2                       DBE/2023
                                    SC/NSC – Marking Guidelines

QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)

1.1       C                                                                   (1)

1.2       A                                                                   (1)

1.3       A                                                                   (1)

1.4       C                                                                   (1)

1.5       B                                                                   (1)

1.6       A                                                                   (1)
                                                                               [6]

Copyright reserved                                                Please turn over

### Page 3

Downloaded from hlayiso.com
Mechanical Technology: Automotive               3                                 DBE/2023
                                         SC/NSC – Marking Guidelines

QUESTION 2: SAFETY (GENERIC)

2.1       Safety rule after the work procedures:
          Switch off the machine.                                                       (1)

2.2       Space between the tool rest and the emery wheel:
           To prevent the work piece from jamming between the wheel and tool
             rest. 
           Prevents the wheel from being damaged. 
           Prevents the work piece from being damaged. 
           Prevent injury. 
                                                                  (Any 2 x 1)            (2)

2.3       Workshop layouts:

          2.3.1      Process layout.                                                    (1)

          2.3.2      Product layout.                                                    (1)

2.4       Hydraulic press:
           Safety goggles 
           Safety gloves 
           Safety shoes 
           Overall 
                                                                        (Any 1 x 1)      (1)

2.5       Safety guard on the portable angle grinder:
           To protect one against sparks/metal particles. 
           To protect one from a breaking disc. 
           To protect your hand from coming into contact with the disc. 
                                                                         (Any 1 x 1)     (1)

2.6       Shearing/Guillotine machine:
           Follow the manufactures recommendations. 
           Keep hands away from action points. 
           Do not exceed the maximum material thickness. 
           Ensure that all guards are in place and secure. 
           Report defects immediately. 
                                                                        (Any 1 x 1)      (1)

Copyright reserved                                                          Please turn over

### Page 4

Downloaded from hlayiso.com
Mechanical Technology: Automotive             4                                  DBE/2023
                                       SC/NSC – Marking Guidelines

2.7      Storing gas cylinders:
          Upright position 
          Stored at 20°C / cool area 
          Empty cylinders stored separately from full cylinder. 
          Never store cylinders on top of each other. 
          Oxygen cylinders separate from fuel cylinders. 
          Secure gas cylinders. 
          Ensure that cylinders are properly closed. 
          Stored away from sparks / flammable material/ electrical switches. 
          Stored in a well-ventilated area. 
          Safety signs should be displayed. 
          Keep cylinders clearly labelled (Full/Empty). 
                                                                        (Any 2 x 1)     (2)
                                                                                        [10]

Copyright reserved                                                         Please turn over

### Page 5

Downloaded from hlayiso.com
Mechanical Technology: Automotive                5                                       DBE/2023
                                          SC/NSC – Marking Guidelines

QUESTION 3: MATERIALS (GENERIC)

3.1       Purpose of tempering:
            To relieve  strain / brittleness. 
            To increase  the toughness of the steel. 
            To refine  grain structure. 
                                                                             (Any 1 x 2)       (2)

3.2       Heat treatment processes:

          3.2.1      Case hardening:
                      To obtain a wear-resistant surface  and at the same time be
                       tough enough internally at the core  to withstand the
                       applied loads.
                      For a hard case over a tough core. 
                                                                         (Any 1 x 2)           (2)

          3.2.2      Annealing:
                      To relieve  internal stresses. 
                      To soften  steel. 
                      Facilitate  the machining processes. 
                      Increase  the steel’s ductility. 
                      Reduce  brittleness. 
                                                                             (Any 1 x 2)       (2)

3.3       Spark test:
           Hold steel against grinding wheel. 
           Observe the spark pattern to identify the type of steel.                          (2)

3.4       Tests:

          3.4.1      Filing test:
                     File on the tip or near the edge  of the material. The bite will
                     determine the hardness.                                                  (2)

          3.4.2      Bend test:
                      Metal is subjected to deformation by bending. 
                      Observe the rupture of the metal.                                      (2)

3.5       Sound test on steel:

          3.5.1      Low carbon steel (LCS):
                     Dull (low pitch) sound.                                                  (1)

          3.5.2      High carbon steel (HCS):
                     Loud and clear (high pitch)  sound.                                      (1)
                                                                                               [14]

Copyright reserved                                                               Please turn over

### Page 6

Downloaded from hlayiso.com
Mechanical Technology: Automotive          6                            DBE/2023
                                    SC/NSC – Marking Guidelines

QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)

4.1       C                                                                   (1)

4.2       B                                                                   (1)

4.3       A                                                                   (1)

4.4       C                                                                   (1)

4.5       B                                                                   (1)

4.6       C                                                                   (1)

4.7       B                                                                   (1)

4.8       C                                                                   (1)

4.9       A                                                                   (1)

4.10      B                                                                   (1)

4.11      D                                                                   (1)

4.12      A                                                                   (1)

4.13      C                                                                   (1)

4.14      C                                                                   (1)
                                                                               [14]

Copyright reserved                                                Please turn over

### Page 7

Downloaded from hlayiso.com
Mechanical Technology: Automotive              7                                     DBE/2023
                                        SC/NSC – Marking Guidelines

QUESTION 5: TOOLS AND EQUIPMENT (SPECIFIC)

5.1       Engine cylinder compression test:
          5.1.1    Reasons for compression test:
                    To determine the amount of compression loss  from a
                      specific cylinder. 
                    To determine if the compression rings  are worn. 
                                                                      (Any 1 x 2)           (2)

          5.1.2      Type of compression test:
                      Dry test 
                      Wet test                                                            (2)

          5.1.3      Reasons for low compression:
                      Worn / cracked cylinders 
                      Worn / broken piston rings 
                      Worn / broken piston 
                      Leaking inlet valve 
                      Leaking exhaust valve 
                      Worn / cracked / bent valve assembly 
                      Leaking cylinder head gasket 
                                                                         (Any 2 x 1)        (2)

5.2       Cylinder leakage tester:
          5.2.1     Labels for cylinder leakage tester:
                    A – Pressure control valve / - knob / - regulator 
                    B – Gauge / Meter 
                    C – Compressor hose / - air hose / -pipe 
                    D – Spark plug connector / - adapter / - hose / - pipe                 (4)

          5.2.2      Reason for pressurised air:
                     To determine the …
                      percentage pressure leakage  from the cylinder. 
                      location  of the cylinder leakage. 
                                                                        (Any 1 x 2)         (2)

5.3      Precautions when performing the exhaust gas analysis:
          The inlet hose must not be stepped on or restricted in any way. 
          The hose connections must be airtight. 
          There should be no leaks in the exhaust, manifolds or vacuum
           systems. 
          Condensate must be blown out of the hoses and pickup probe. 
          The condenser must be drained after each test. 
          When the paper filter becomes light grey, it should be replaced. 
          Test must be done in a well-ventilated area. 
          Ensure the tester is connected to the battery correctly. 
                                                                         (Any 3 x 1)        (3)

Copyright reserved                                                             Please turn over

### Page 8

Downloaded from hlayiso.com
Mechanical Technology: Automotive             8                                  DBE/2023
                                       SC/NSC – Marking Guidelines

5.4      Systems scanned by on-board diagnostic scanner:
          Powertrain (PCM) 
          Transmission (TCM) 
          Brakes (ABS) 
          Body (BCM) 
          Engine (ECM) 
          Humidity, ventilation and air conditioning (HVAC) 
          Air bags (SRS) 
                                                                       (Any 3 x 1)      (3)

5.5      Faults on the wheel established during dynamic wheel balancing:
          The extent of the imbalance 
          The run-out of the tyre 
          The run-out of the wheel assembly 
                                                                   (Any 2 x 1)           (2)

5.6      Perform dynamic wheel balancing:
          Start the balancer and allow wheel to spin. 
          Obtain the imbalance readings and its locations on the rim. 
          Fit the correct weights.                                                     (3)
                                                                                         [23]

Copyright reserved                                                         Please turn over

### Page 9

Downloaded from hlayiso.com
Mechanical Technology: Automotive              9                                   DBE/2023
                                        SC/NSC – Marking Guidelines

QUESTION 6: ENGINES (SPECIFIC)

6.1       Crankshaft:

          6.1.1      Crankshaft                                                          (1)

          6.1.2      Function:
                     To convert the reciprocating motion of the pistons  into rotary
                     motion.                                                             (2)

          6.1.3      Crank web / counterweight                                           (1)

          6.1.4      Static balance:
                     The crankshaft is in static balance when the mass in all
                     directions  from the centre of rotation is equal while it is at
                     rest.                                                               (2)

6.2       Vibration damper:

          6.2.1      Crankshaft                                                          (1)

          6.2.2      Function:
                     To smooth/dampen out the engine vibrations.                         (1)

6.3      Engine cylinder configurations:
          Inline / straight 
          V
          W
          Flat / horizontal 
          Radial / X-Engine 
          U-Engine 
          K-engine 
          Delta 
                                                                          (Any 3 x 1)     (3)

6.4      Power strokes intervals:
          To reduce engine vibrations. 
          To ensure smooth running of the engine. 
          To reduce the wear rate on the engine components. 
                                                                          (Any 2 x 1)     (2)

6.5      Determine the firing order:
          Read from the vehicle specifications. 
          It may be written on the tappet cover. 
          Check the order in which the valves rock. 
          Check the order in which the sparks are distributed from the
           distributor. 
                                                                          (Any 3 x 1)     (3)

Copyright reserved                                                           Please turn over

### Page 10

Downloaded from hlayiso.com
Mechanical Technology: Automotive              10                                   DBE/2023
                                         SC/NSC – Marking Guidelines

6.6       Turbocharger:

          6.6.1      Boost:
                     The increasing of manifold pressure  above the normal
                     atmospheric pressure.                                                (2)

          6.6.2      Types:
                      Variable Geometry Turbocharger (VGT) 
                      Non-variable Turbocharger                                          (2)

6.7       Supercharger:

          6.7.1      Reasons for fitting:
                      To increase cylinder pressure / compression pressure. 
                      To increase the volumetric efficiency. 
                      To increase the engine output / performance. 
                      Increase fuel efficiency. 
                                                                        (Any 2 x 1)        (2)

          6.7.2      Mechanical drive:
                      Belt 
                      Gears 
                      Chain 
                      Shaft 
                                                                        (Any 2 x 1)        (2)

6.8      Twin-charging:
          A combination of a turbocharger  and a supercharger. 
          Two turbochargers  are combined on the same engine. 
          Two superchargers  are combined on the same engine. 
                                                                        (Any 1 x 2)        (2)

6.9      Advantages of twin-charging:
          Outstanding fuel economy. 
          Reduce/eliminates lag at low revolutions. 
          Increased power and torque across the entire power band. 
          Reduced power required (sapping effect) by the supercharger pulley
           from the engine. 
                                                                     (Any 2 x 1)           (2)
                                                                                           [28]

Copyright reserved                                                            Please turn over

### Page 11

Downloaded from hlayiso.com
Mechanical Technology: Automotive                 11                            DBE/2023
                                            SC/NSC – Marking Guidelines

QUESTION 7: FORCES (SPECIFIC)

7.1      Swept volume:
          Total volume  when the piston moves from bottom dead centre to top
           dead centre. 
          Total volume  displaced during a stroke. 
                                                                  (Any 1 x 2)          (2)

7.2      Method to increase compression ratio:
          Remove shims between the cylinder block and cylinder head. 
          Fit thinner cylinder head gasket. 
          Machine metal from cylinder head. 
          Skim metal from cylinder block. 
          Fit a piston with a higher crown. 
          Fit a crankshaft with a longer stroke. 
          Increase the bore of the cylinders / bigger pistons. 
                                                                    (Any 3 x 1)        (3)

7.3       Calculation:

          7.3.1      Swept volume:

                               D2
                     SV             L
                              4
                                       
                              (9 2 )
                                       10 
                               4
                           636,17 cm 3                                               (3)

          7.3.2      Original clearance volume:

                              SV
                     CV 
                             CR  1
                             636,17 
                         
                             10,5  1 
                          66,97 cm3                                                  (3)

Copyright reserved                                                        Please turn over

### Page 12

Downloaded from hlayiso.com
Mechanical Technology: Automotive               12                               DBE/2023
                                          SC/NSC – Marking Guidelines

          7.3.3      New bore diameter:

                                               SV
                     New compression ratio        1
                                               CV
                                          SV  (CR  1)(CV) 
                                          SV  (11 1)(66,97) 
                                           SV  669,7 cm 3 

                                                     D2
                                           SV      L
                                                4
                                                SV  4
                                             D        
                                                  L
                                                   669,7  4
                                                            
                                                      10
                                                9,234 cm 
                                                92,34 mm                              (7)
7.4       Prony brake calculations:
          7.4.1      Indicated power in kW:

                      P =900  103 Pa

                           86
                      L=
                          1000
                        = 0,086 m 

                             D2
                     A=
                            4
                            0,0842 
                        =
                               4
                        = 5,542×10-3 m2 

                          2000
                      N=         
                          60  1
                        = 33,33 power strokes / sec 

                      n = 2 cylinders
                     IP=PLANn
                        = (900  103 )(0,086)(5,542 10 -3 )(33,33)(2) 
                        = 28593,86 W
                        = 28,59 kW                                                     (7)

Copyright reserved                                                         Please turn over

### Page 13

Downloaded from hlayiso.com
Mechanical Technology: Automotive              13                            DBE/2023
                                         SC/NSC – Marking Guidelines

          7.4.2      Brake power in kW:

                     Torque  Force  radius
                                   
                               (25  10)(0,4) 
                               100 Nm 

                     BP  2  NT
                         2    33,33  100 
                         20941,85663 W
                         20,94 kW                                                 (5)

          7.4.3      Mechanical efficiency:

                         BP
                           100
                         IP
                         20,94
                               100 
                         28,59
                        73,24 %                                                   (2)
                                                                                    [32]

Copyright reserved                                                     Please turn over

### Page 14

Downloaded from hlayiso.com
Mechanical Technology: Automotive               14                                    DBE/2023
                                          SC/NSC – Marking Guidelines

QUESTION 8: MAINTENANCE (SPECIFIC)

8.1       Gas Analysis:

          FAULTS           POSSIBLE CAUSES                  CORRECTIVE
          (DEFECTS)                                         MEASURES
                           8.1.1                            8.1.2
          High oxygen      Too lean air-fuel ratio.        Reset fuel mixture. 
          (O2)             Ignition problems.              Check and reset ignition
          reading                                           system. 
                           Vacuum leaks.                   Repair vacuum leaks. 
                           Catalytic converter not          Check and repair the
                           working.                        catalytic converter. 
                                            (Any 1 x 1)                    (Any 1 x 1)

                           8.1.3                            8.1.4
          High             Excessive unburned fuel.        Reset fuel mixture. 
          hydrocarbon      Improper timing.                Check and reset ignition
          (HC)                                              system. 
          reading          Vacuum leak.                    Repair vacuum leaks. 
                           Faulty air management            Check and repair the air
                           system.                         management system. 
                                           (Any 1 x 1)                    (Any 1 x 1)        (4)

8.2       Compression test:

          8.2.1         Prevent distribution of high voltage. 
                        To prevent electrical shock. 
                        To gain access to the spark plugs. 
                                                                            (Any 1 x 1)      (1)

          8.2.2         To prevent fuel entering the exhaust system. 
                        To prevent fuel from entering the tester. 
                                                                            (Any 1 x 1)      (1)

          8.2.3         To obtain the correct amount of air entering the cylinder. 
                        To obtain a correct reading. 
                                                                             (Any 1 x 1)     (1)

          8.2.4         To compare reading to the specifications. 
                        To check if the pressure is correct or not. 
                                                                            (Any 1 x 1)      (1)

Copyright reserved                                                              Please turn over

### Page 15

Downloaded from hlayiso.com
Mechanical Technology: Automotive               15                                     DBE/2023
                                          SC/NSC – Marking Guidelines

8.3       Cylinder leakage test:
          FAULTS           POSSIBLE CAUSES            CORRECTIVE MEASURES
          (DEFECTS)
8.3.1     Hissing sound at Leaking inlet valves.     Replace or reseat valves. 
          the air intake   Gasket blown between Replace head gasket. 
                           adjacent cylinders. 
                                          (Any 1 x 1)                 (Any 1 x 1)             (2)

8.3.2     Hissing sound at Worn piston rings.                  Overhaul engine. 
          the dipstick                                          Fit new rings. 
                           Worn piston.                        Fit new pistons. 
                                                                Overhaul engine. 
                                              (Any 1 x 1)                     (Any 1 x 1)     (2)

8.4      Causes of a high oil pressure reading:
          Blocked oil passages 
          Too little crankshaft bearing clearances 
          Dirty or contaminated oil 
          Oil viscosity is too high 
          Pressure relief valve stuck in closed position. 
                                                                             (Any 3 x 1)      (3)

8.5       Fuel pressure test:

          8.5.1      Manufacturer's specifications for fuel pressure test:
                      Fuel pressure after the fuel pump. 
                      Fuel pressure when the engine is idling. 
                      Fuel pressure on high revolutions. 
                                                                       (Any 2 x 1)            (2)

          8.5.2      Placement of fuel pressure tester:
                     Fit the fuel pressure tester to the fuel line.                          (1)

          8.5.3      Perished rubber pipe of fuel pressure tester:
                      Fuel / pressure will leak from the pipe. 
                      The tester will give inaccurate results. 
                      Fire hazard. 
                                                                             (Any 1 x 1)      (1)

Copyright reserved                                                               Please turn over

### Page 16

Downloaded from hlayiso.com
Mechanical Technology: Automotive           16                               DBE/2023
                                      SC/NSC – Marking Guidelines

8.6      Causes of cooling system pressure drop:
         Coolant leaks from …
          between gaskets/seals of the cooling system. 
          water hoses. 
          blown cylinder head gasket. 
          the water pump. 
          radiator. 
          heater radiator. 
          corroded welch or core plugs. 
          components not fitted correctly. 
                                                                    (Any 4 x 1)     (4)
                                                                                    [23]

Copyright reserved                                                     Please turn over

### Page 17

Downloaded from hlayiso.com
Mechanical Technology: Automotive               17                                     DBE/2023
                                          SC/NSC – Marking Guidelines

QUESTION 9: SYSTEMS AND CONTROL (AUTOMATIC GEARBOX) (SPECIFIC)

9.1       Solutions for an automatic gearbox:

          9.1.1         Remove the propeller / drive shaft. 
                        Use a flatbed tow-truck. 
                        Use a mobi-jack / lift the drive wheels off the ground. 
                                                                              (Any 1 x 1)     (1)

          9.1.2         Use a lock-up clutch. 
                        The torque converter needs to be replaced. 
                        The torque converter to be repaired. 
                        Top-up fluids/oil. 
                                                                             (Any 1 x 1)      (1)

          9.1.3         Identify the cause of the problem and repair. 
                        Use an oil cooler. 
                        Top-up/replace fluids/oil. 
                                                                             (Any 1 x 1)      (1)

          9.1.4      Ensure the lever is shifted to:
                      Park (P) 
                      Neutral (N) 
                                                                             (Any 1 x 1)      (1)

          9.1.5      Use automatic transmission fluid (ATF).                                 (1)

9.2       Components of the torque converter:

          9.2.1         Pump 
                        Impeller 
                                                                             (Any 1 x 1)      (1)

          9.2.2      Turbine                                                                 (1)

          9.2.3      Stator                                                                  (1)

9.3       Manual valve                                                                       (1)

9.4      Advantages of epicyclic gear trains:
          Provides a variation in torque. 
          Changes the direction of rotation. 
          It's compact in design. 
          Gears are in constant mesh. 
                                                                             (Any 2 x 1)      (2)

9.5       Gear system of an automatic gearbox:

          9.5.1      Double epicyclic gear system                                            (1)

Copyright reserved                                                               Please turn over

### Page 18

Downloaded from hlayiso.com
Mechanical Technology: Automotive              18                                    DBE/2023
                                         SC/NSC – Marking Guidelines

          9.5.2      Obtain reverse gear:
                      The brake band locks the annulus 1. 
                      The input shaft (engine) drives the sun gears. 
                      Planet gear 1 walks around the sun gear 1 in a reverse
                       direction. 
                      Planet gear 1 turns the planet carrier in a reverse direction. 
                      Planet carrier turns the output shaft.                              (5)

9.6       Oil pump                                                                         (1)
                                                                                            [18]

Copyright reserved                                                             Please turn over

### Page 19

Downloaded from hlayiso.com
Mechanical Technology: Automotive               19                                       DBE/2023
                                          SC/NSC – Marking Guidelines

QUESTION 10:         SYSTEMS AND CONTROL (AXLES, STEERING GEOMETRY
                     AND ELECTRONIC) (SPECIFIC)

10.1     Well-designed steering system:
          Light and easy to control 
          Free from vibration and road shocks 
          As direct as possible without much drivers effort. 
          Self centering 
          Not unduly affected by the suspension or braking system operation 
                                                                      (Any 2 x 1)               (2)

10.2      Wheel alignment angle:

          10.2.1     Label A-C:
                     A. Axle centre 
                     B. Rear axle 
                     C. Steering arms                                                          (3)

          10.2.2     Angle D:
                     Ackermann's angle                                                         (1)

          10.2.3     It gives variable toe-out  to the front wheels on turns.                 (2)

10.3      Unbalanced wheels drawings:

          10.3.1     Wheel bounce (hop):

                                                                           
                                                         
                                                             OR

                                                            
                                                         Bounce
                                                                                                (2)

Copyright reserved                                                                 Please turn over

### Page 20

Downloaded from hlayiso.com
Mechanical Technology: Automotive              20                                   DBE/2023
                                         SC/NSC – Marking Guidelines

          10.3.2     Wheel wobble (shimmy):

                                                             

                                                            Wobble 
                                                                                           (2)

          10.3.3     Difference between wheel wobble and wheel bounce:
                      Wheel wobble is the side to side movement (vibration) of a
                        wheel. 
                      Wheel bounce is the up and down movement (vibration) of a
                        wheel.                                                            (2)

10.4     Materials coating the monolith:
          Aluminium oxide 
          Platinum 
          Rhodium 
          Palladium 
                                                                          (Any 2 x 1)      (2)

10.5      Functions of sensors:

          10.5.1     Lambda sensor:
                      The sensor measures the oxygen content in the flow of the
                       exhaust gas. 
                      Sends the information to the electronic control unit (ECU).        (2)

          10.5.2     Throttle position sensor (TPS) sensor:
                      Detects the position of the throttle. 
                      Sends the information to the electronic control unit (ECU).        (2)

          10.5.3     Mass Air Flow (MAF) sensor:
                      To measure the air flow to the engine. 
                      To measure the air flow temperature. 
                      Sends the information to the electronic control unit (ECU). 
                                                                           (Any 2 x 1)     (2)

Copyright reserved                                                            Please turn over

### Page 21

Downloaded from hlayiso.com
Mechanical Technology: Automotive            21                                  DBE/2023
                                    SC/NSC – Marking Guidelines

10.6     Operation of common rail direct injection (CRDI):
          The high pressure pump transfers the fuel under high pressure to the
           common rail. 
          The common rail holds and distributes the pressurised fuel to the
           injectors. 
          The injectors spray the fuel directly into the cylinder.                  (3)

10.7     Current is generated:
          If a magnetic field is moved across a conductor , a voltage is induced
           across the ends of the conductor , which will cause a current to flow 
          Convert mechanical energy  into electrical energy  by electro-
           magnetic induction. 
                                                                        (Any 1 x 3)   (3)

10.8     Alternator stator tests:
          Continuity 
          Leakage                                                                   (2)

10.9     Positions electrical fuel pump is placed:
          Inside the fuel tank 
          External – anywhere on the fuel line.                                     (2)
                                                                                      [32]

                                                                          TOTAL:       200

Copyright reserved

## Related documents

- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — Mechanical Technology · QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-eng/1523a16f-2012-4f13-a922-86cbb5900666) — Mechanical Technology · QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Automotive) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-afr/8d31d25d-e192-4aa9-b448-efab233391a1) — Mechanical Technology · QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Fitting & Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-fitting-machining-afr/13f8ed56-a4ef-4858-8d10-2d07c992e826) — Mechanical Technology · QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-eng/c6bfa7b8-3601-4a11-9be4-55ee65e4011f) — Mechanical Technology · QP · 2023 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Mechanical Technology · Memo · 2023 · Afr

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1) — Memo · 2023 · Eng
- [MECHANICAL TECH (Auto) GR12 MEMO SEPT2023 English](https://www.hlayiso.com/library/mechanical-tech-auto-gr12-memo-sept2023-english/dfc975c1-e179-4741-8d4f-e3b20c744c7e) — Memo · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
