# Mechanical Technology Grade 12 NSC June 2023 Memo (English)

> Grade 12 Mechanical Technology memorandum from the NSC June Exam 2023 (English), 21 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-mg-eng/90c02c88-3a81-4bd2-8be5-43e295528579
- Updated: 2026-10-29
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2023
- Exam period: NSC June Exam
- Curriculum: CAPS
- Pages: 21

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 NSC June 2023 Memo (English)](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-mg-eng/90c02c88-3a81-4bd2-8be5-43e295528579)

## About this document

Mechanical Technology · Grade 12 · NSC June Exam · 2023. Memorandum. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

             SENIOR CERTIFICATE EXAMINATIONS/
         NATIONAL SENIOR CERTIFICATE EXAMINATIONS

         MECHANICAL TECHNOLOGY: WELDING AND METALWORK

                                         2023

                               MARKING GUIDELINES

                                                                     MARKS: 200

                     These marking guidelines consist of 21 pages.

Copyright reserved                                                   Please turn over

### Page 2

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      2                       DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)

1.1       C                                                                     (1)

1.2       A                                                                     (1)

1.3       A                                                                     (1)

1.4       C                                                                     (1)

1.5       B                                                                     (1)

1.6       A                                                                     (1)
                                                                                 [6]

Copyright reserved                                                  Please turn over

### Page 3

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      3                               DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 2: SAFETY (GENERIC)

2.1       Safety rule after the work procedures:
          Switch off the machine.                                                       (1)

2.2       Space between the tool rest and the emery wheel:
           To prevent the work piece from jamming between the wheel and tool
             rest. 
           Prevents the wheel from being damaged. 
           Prevents the work piece from being damaged. 
           Prevent injury. 
                                                                  (Any 2 x 1)            (2)

2.3       Workshop layouts:

          2.3.1      Process layout.                                                    (1)

          2.3.2      Product layout.                                                    (1)

2.4       Hydraulic press:
           Safety goggles 
           Safety gloves 
           Safety shoes 
           Overall 
                                                                        (Any 1 x 1)      (1)

2.5       Safety guard on the portable angle grinder:
           To protect one against sparks/metal particles. 
           To protect one from a breaking disc. 
           To protect your hand from coming into contact with the disc. 
                                                                         (Any 1 x 1)     (1)

2.6       Shearing/Guillotine machine:
           Follow the manufactures recommendations. 
           Keep hands away from action points. 
           Do not exceed the maximum material thickness. 
           Ensure that all guards are in place and secure. 
           Report defects immediately. 
                                                                        (Any 1 x 1)      (1)

Copyright reserved                                                          Please turn over

### Page 4

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      4                              DBE/2023
                                      SC/NSC – Marking Guidelines

2.7      Storing gas cylinders:
          Upright position 
          Stored at 20°C / cool area 
          Empty cylinders stored separately from full cylinder. 
          Never store cylinders on top of each other. 
          Oxygen cylinders separate from fuel cylinders. 
          Secure gas cylinders. 
          Ensure that cylinders are properly closed. 
          Stored away from sparks / flammable material/ electrical switches. 
          Stored in a well-ventilated area. 
          Safety signs should be displayed. 
          Keep cylinders clearly labelled (Full/Empty). 
                                                                        (Any 2 x 1)     (2)
                                                                                        [10]

Copyright reserved                                                         Please turn over

### Page 5

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      5                                      DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 3: MATERIALS (GENERIC)

3.1       Purpose of tempering:
            To relieve  strain / brittleness. 
            To increase  the toughness of the steel. 
            To refine  grain structure. 
                                                                             (Any 1 x 2)       (2)

3.2       Heat treatment processes:

          3.2.1      Case hardening:
                      To obtain a wear-resistant surface  and at the same time be
                       tough enough internally at the core  to withstand the
                       applied loads.
                      For a hard case over a tough core. 
                                                                         (Any 1 x 2)           (2)

          3.2.2      Annealing:
                      To relieve  internal stresses. 
                      To soften  steel. 
                      Facilitate  the machining processes. 
                      Increase  the steel’s ductility. 
                      Reduce  brittleness. 
                                                                             (Any 1 x 2)       (2)

3.3       Spark test:
           Hold steel against grinding wheel. 
           Observe the spark pattern to identify the type of steel.                          (2)

3.4       Tests:

          3.4.1      Filing test:
                     File on the tip or near the edge  of the material. The bite will
                     determine the hardness.                                                  (2)

          3.4.2      Bend test:
                      Metal is subjected to deformation by bending. 
                      Observe the rupture of the metal.                                      (2)

3.5       Sound test on steel:

          3.5.1      Low carbon steel (LCS):
                     Dull (low pitch) sound.                                                  (1)

          3.5.2      High carbon steel (HCS):
                     Loud and clear (high pitch)  sound.                                      (1)
                                                                                               [14]

Copyright reserved                                                               Please turn over

### Page 6

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      6                       DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)

4.1       C                                                                     (1)

4.2       B                                                                     (1)

4.3       A                                                                     (1)

4.4       B                                                                     (1)

4.5       D                                                                     (1)

4.6       D                                                                     (1)

4.7       B                                                                     (1)

4.8       D                                                                     (1)

4.9       C                                                                     (1)

4.10      A                                                                     (1)

4.11      C                                                                     (1)

4.12      A                                                                     (1)

4.13      D                                                                     (1)

4.14      B                                                                     (1)
                                                                                 [14]

Copyright reserved                                                  Please turn over

### Page 7

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      7                           DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 5: TERMINOLOGY(TEMPLATES) (SPECIFIC)

5.1        Roof covering  is attached  to the purlins.
           Purlins contribute to the rigidity  and correct spacing of the
            rafters/structure.
                                                                   (Any 1 x 2)        (2)

5.2     Types of weld symbols:

        5.2.1        Site weld                                                      (1)

        5.2.2        Surfacing                                                      (1)

        5.2.3        U butt weld                                                    (1)

        5.2.4        Seam weld                                                      (1)

5.3     Strip templates are used for longer sections of angle iron.                  (1)

5.4     Dimensions of the material:

        5.4.1        Mean diameter:

                     Mean Ø  Inside Ø  Thickness
                             180  12 
                             192 mm                                                (2)

        5.4.2        Mean circumference:

                     Mean circumference  π  Mean Ø
                                          π  192 mm 
                                          603,186 mm 
                                                          
                                         Round off to 603 mm                        (3)

5.5     Welding symbols:
         Fillet weld both sides 
         8 mm in size 
         Length of weld bead is 50 mm 
         Pitch of weld is 100 mm                                                    (4)

Copyright reserved                                                      Please turn over

### Page 8

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      8                            DBE/2023
                                      SC/NSC – Marking Guidelines

5.6     Roof truss:
        A- Purlins 
        B- Ridging 
        C- Roof covering 
        D- Rafter 
        E- Internal bracing member                                                    (5)

5.7     Lattice beams:
         Tends to be very rigid. 
         Gives good strength to weight ratios over long spans. 
                                                                     (Any 1 x 2)       (2)
                                                                                       [23]

Copyright reserved                                                       Please turn over

### Page 9

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      9                              DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC)

6.1     Bench grinder uses:
         Sharpening of tools
         Shaping of metal
         Remove unwanted material
        
         Grinding prior to welding of work piece
         Used in conjunction with wire brush wheel to remove rust
         Used in conjunction with buffing wheel to polish work piece
                                                                        (Any 3 x 1)      (3)

6.2     MIG:
        Metal inert gas                                                                  (1)

6.3     Plasma cutter:
         The cutter sends an electrical channel of ionized gas through the work
           piece being cut.
         It forms a complete electric circuit via a grounding clamp.
         Compressed air is blown towards the work piece through a focused
           nozzle at high speed.
         An electric arc is formed between the gas nozzle and the work piece.           (4)

6.4     Types of taps:
         Taper tap / first tap
         Intermediate tap / second tap
         Plug tap / bottoming tap                                                       (3)

6.5     Removing slag:
         Chipping hammer 
         Wire brush 
                                                                        (Any 1 x 1)      (1)

6.6     Vertical rollers:
        Used solely for bending / rolling thick, heavy plates.                          (1)

6.7     Horizontal band saw:
         Ensures clean cut.
         Removes shavings / cuttings.
         Blade life span is prolonged.
         Cools the blade.
         Cools the metal.
                                                                        (Any 2 x 1)      (2)

Copyright reserved                                                         Please turn over

### Page 10

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      10                         DBE/2023
                                      SC/NSC – Marking Guidelines

6.8     Oxy-acetylene equipment - processes:
         Gas welding 
         Brazing 
         Silver soldering 
         Heating / Melting 
         Cutting 
         Gouging 
                                                                    (Any 3 x 1)      (3)
                                                                                     [18]

Copyright reserved                                                     Please turn over

### Page 11

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      11                                           DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 7: FORCES (SPECIFIC)

7.1 Frameworks:

                                         300 N                                            100 N

                                                                    B

                                  A                                 F
                                                E
                                                                                    C

                                           D
                                         7000

                     100 N                                    300 N
                                                                        a

                                                      
       Note to marker:
       Marker must redraw the space
       and force diagram according to           e                           d
                                                          
       given scales for marking
       purposes. Tolerance of ±2 mm

                                                                                

                                                                    b                     f

        MEMBER         FORCE (N)       NATURE
          AE            140 N          Strut 
          EF            285 N          Strut                                      
          FC            140 N          Strut 
          BF            100 N           Tie                           c
          ED            100 N           Tie 
                                                                                                     (15)

Copyright reserved                                                                      Please turn over

### Page 12

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      12                                     DBE/2023
                                      SC/NSC – Marking Guidelines

7.2       Beams:

          7.2.1      Calculate RL:
                     Moments about RR:
                                                        
                     RL  10  8  8   4  5   6  2 
                               96
                         RL 
                               10
                         RL  9,6 kN                                                           (4)

          7.2.2      Calculate RR:
                     Moments about RL:
                                                      
                     RR  10  6  8   4  5   8  2
                               84
                         RR 
                               10
                         RR  8,4 kN                                                           (4)

          7.2.3      Bending moment:

                     Moment at:            
                                   B: 9,6 x 2 = 19,2 kN.m 
                                                
                                   C: (9,6 x 5) – (8 x 3) = 24 kN.m 
                                                         
                                   D: (9,6 x 8) – (8 x 6) – (4 x 3) = 16,8 kN.m                (6)

Copyright reserved                                                                 Please turn over

### Page 13

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      13                                      DBE/2023
                                      SC/NSC – Marking Guidelines

          7.2.4      Bending-moment diagram:

                                     8 kN               4 kN             6 kN

                            A            B                   C                  D        E

                                2m            3m                    3m              2m
                       RL                                                                  RR

                                                          24
                                               
                                                                    
                                19,2
                                                                            16,8
                                

                                                                                    

                        0                                                                 0

                         A           B                   C                  D            E

                        Note to marker:
                        Marker must redraw the
                        bending-moment diagram
                        according to given scales for
                        marking purposes.
                                                                                                  (4)

Copyright reserved                                                                  Please turn over

### Page 14

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      14                                        DBE/2023
                                      SC/NSC – Marking Guidelines

7.3       Stress and strain:

          7.3.1        Cross sectional area m2:

                             πD 2
                        A
                              4
                             π  0,03 2 
                         
                                 4
                          0,71 x 10-3 m2                                                         (2)

          7.3.2        Stress MPa:

                                 Load
                       Stress 
                                 Area
                                  80  103 
                               
                                 0,71 10-3 
                                112676056,3 Pa
                                112,68 MPa                                                       (3)

          7.3.3        Strain:

                                 ΔL
                       Strain 
                                 OL
                                 0,06
                                     
                                 3000
                                0,00002      OR    2  10-5                                      (2)

          7.3.4        Young's modulus of elasticity:

                           Stress
                       E
                           Strain
                           112,68  106                            112,68  10 6 
                                                      OR     
                             2  10-5                                2  10-5 
                          5,633802815  1012 Pa              5,634  1012 Pa
                          5633,80  GPa                     5634 GPa                           (3)

7.4       Maximum stress:

                       Load
          Stress 
                       Area
                        55  103
                                 
                       0,9  10-5
                      6111111111 Pa
                                     
                      6111,11 MPa                                                                 (2)
                                                                                                   [45]

Copyright reserved                                                                    Please turn over

### Page 15

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      15                             DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 8: JOINING METHODS (INSPECTION OF WELD) (SPECIFIC)

8.1      Visual inspection:
          Shape of the profile 
          Uniformity of the surface 
          Overlap 
          Undercutting 
          Penetration bead 
          Root groove 
          Fusion 
          Reinforcement 
          Porosity 
          Spatter 
          Slag inclusions 
          (ANY WELD DEFECT THAT CAN BE SEEN VISUALLY AFTER
            WELDED) 
                                                         (Any 2 x 1)                    (2)

8.2       Free bend test:
           Ductility 
           Brittleness 
           Malleability 
           Elongation 
           Elasticity 
                                                                       (Any 1 x 1)      (1)

8.3       Weld defect:
          Weld defect is a result which does not meet  the prescribed requirements
          of a welded joint.                                                           (2)

8.4       Causes of welding defects:

          8.4.1      Undercutting:
                      Current too high 
                      Current too low 
                      Wrong electrode angle 
                      Arc length too long 
                      Weld speed too fast 
                      Too low arc voltage 
                      Faulty electrode manipulation 
                                                                       (Any 2 x 1)      (2)

Copyright reserved                                                         Please turn over

### Page 16

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      16                              DBE/2023
                                      SC/NSC – Marking Guidelines

          8.4.2      Blow hole:
                      Presence of contaminants / impurities on the job surface or
                        on electrode flux 
                      Presence of high sulphur in the job or electrode materials 
                      Lack of shielding gas 
                      Using wet electrode 
                                                                         (Any 2 x 1)     (2)

8.5       Destructive tests:
           Machinability test 
           Nick break test 
           Free bend test 
           Guided bend test 
                                                                        (Any 2 x 1)      (2)

8.6       Procedure for conducting X-ray test:
           The photographic film is sealed in an envelope (so that the light cannot
              expose it) and placed behind the object being tested. 
           The X-ray or gamma ray source is placed in front of the object being
              tested. 
           The tester should stand behind lead shields and far away from
              possible harmful exposure. The source is activated for a brief moment
              and the X-rays penetrate the test piece. 
           As they pass through the areas of lower density, the rays expose the
              defect on the film as a lighter colour on the negative,  indicating a
              weld defect. 
           Photographic films provide a permanent record of the shadow which
              can be carefully studied. / Shown on a monitor screen                     (6)

8.7       Types of dye:
           Fluorescent dye 
           Brightly coloured dye                                                       (2)

8.8       Internal weld defects:
           Cracks 
           Slag inclusion 
           Lack of fusion 
           Lack of root penetration 
           Blow hole 
           Porosity 
                                                                        (Any 2 x 1)      (2)

8.9       Centreline cracks:
           Use the correct width to depth ratio. 
           Decreasing the current to decrease excess penetration. 
           Decreasing welding/arc voltage. 
                                                                        (Any 2 x 1)      (2)
                                                                                         [23]

Copyright reserved                                                          Please turn over

### Page 17

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      17                               DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC)

9.1       Distortion and residual stress:
           If the expansion that occurs when metal is heated is resisted then
             distortion will occur. 
           When contraction that occurs on cooling is resisted then a stress will be
             applied. 
           If the applied stress causes movement then distortion occurs. 
           If the applied stress does not cause movement then there will be
             residual stress in the welded joint. 
                                                                         (Any 2 x 1)      (2)

9.2       Shrinkage:
          Shrinkage is a form of plastic deformation where the metal has
          deformed  as a result of contraction on cooling.                              (2)

9.3       Grain size:
           The prior amount of cold work 
           The temperature and time of the annealing process 
           The composition 
           The melting point 
                                                                         (Any 2 x 1)      (2)

9.4       Cold working and hot working:
           Cold working is when deformation  of steel takes place below the
            recrystallisation temperature (AC1)  of the steel.
           Hot working is when deformation  of steel takes place above the
            recrystallisation temperature (AC1)  of the steel.                           (4)

9.5       Distortion:
           Do not over weld. 
           Apply intermittent welding. 
           Place welds near the neutral axis. 
           Use as few passes as possible. 
           Use back-step welding. 
           Anticipate the shrinkage forces. 
           Plan the welding sequence. 
           Use strong backs. 
           Use clamps, jigs and fixtures. 
                                                                         (Any 4 x 1)      (4)

Copyright reserved                                                           Please turn over

### Page 18

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      18                               DBE/2023
                                      SC/NSC – Marking Guidelines

9.6       Types of distortion:

          9.6.1      Longitudinal distortion                                             (1)

          9.6.2      Angular distortion                                                  (1)

9.7       Metal is cooled rapidly:
          Rapid cooling of metal results in large temperature differences that set up
          stresses,  which cause cracks on the surface.                                 (2)
                                                                                          [18]

Copyright reserved                                                           Please turn over

### Page 19

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      19                               DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 10: MAINTENANCE (SPECIFIC)

10.1      Maintenance definition:
          Precautionary measures, actions and processes  that are taken to keep a
          machine or process  in a functional order.                                    (3)

10.2     Pedestal drilling machine:
          Visual checks of electrical wiring, switches. 
          Verify that all guards are secure and function correctly. 
          Lubricate moving parts. 
          Use moisture-penetrating oil spray to prevent rust. 
          Check for availability of specific tools. 
          Check the run-out of the spindle. 
          Inspect drive belts for wear. 
          Ensure the drive belt is correctly tensioned. 
          Check the condition of the rack and pinion mechanisms and
            lubricate. 
          Ensure cuttings are removed. 
          Inspect the Morse taper sleeves for burrs/scratches. 
          Check the chuck is correctly fitted and tight. 
                                                                          (Any 2 x 1)     (2)

10.3     Tagging plates:
          It is to isolate switches of machines before maintenance is
           undertaken. 
          To show workers that maintenance is being carried out on a specific
           machine. 
                                                                   (Any 1 x 1)            (1)

10.4     Service records:
          Assist in the monitoring of the condition of the machines. 
          Assist in upholding warranties. 
          Assist in keeping a history of maintenance and repairs. 
                                                                          (Any 2 x 1)     (2)
                                                                                          [8]

Copyright reserved                                                           Please turn over

### Page 20

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      20                      DBE/2023
                                      SC/NSC – Marking Guidelines

QUESTION 11: TERMINOLOGY (DEVELOPMENTS) (SPECIFIC)

11.1      Hopper:

          11.1.1     Square  to rectangle  on centre.                         (3)

          11.1.2      (a)    A–1:

                                A -1= 1002 +1252 + 4502 
                                      = 228125
                                      = 477,62 mm                               (2)

                      (b)    A–2:

                                A  2  4002  1252  4502 

                                        378125
                                        614,92 mm                              (2)

                      (c)    B–3:

                                B  3  3752  1002  4502 

                                        353125
                                        594,24 mm                              (2)

11.2      Cone frustum:

          11.2.1     A–B:

                                 ×D    
                     A B 
                                 12
                                 × 800 
                            
                                  12
                             209,44 mm                                         (3)

          11.2.2     0–1:

                              πd 
                     0 1
                               12
                              π  600 
                            
                                12
                             157,08mm                                          (3)

Copyright reserved                                                  Please turn over

### Page 21

Downloaded from hlayiso.com
Mechanical Technology: Welding and Metalwork      21                                DBE/2023
                                      SC/NSC – Marking Guidelines

          11.2.3     A–0:
                     Plan length / base line:

                      A–0 = 400 - 300 
                          = 100 mm 

                     True length:

                     A  0  100 2  500 2 
                             260 000
                             509,90 mm                                                  (4)

11.3      Square to round transformer:
          Use to connect ducting sections  of dissimilar shapes to each other.          (2)
                                                                                          [21]

                                                                           TOTAL:        200

Copyright reserved

## Related documents

- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — Mechanical Technology · QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-eng/1523a16f-2012-4f13-a922-86cbb5900666) — Mechanical Technology · QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Automotive) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-afr/8d31d25d-e192-4aa9-b448-efab233391a1) — Mechanical Technology · QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Fitting & Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-fitting-machining-afr/13f8ed56-a4ef-4858-8d10-2d07c992e826) — Mechanical Technology · QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-eng/c6bfa7b8-3601-4a11-9be4-55ee65e4011f) — Mechanical Technology · QP · 2023 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Mechanical Technology · Memo · 2023 · Afr

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1) — Memo · 2023 · Eng
- [MECHANICAL TECH (Auto) GR12 MEMO SEPT2023 English](https://www.hlayiso.com/library/mechanical-tech-auto-gr12-memo-sept2023-english/dfc975c1-e179-4741-8d4f-e3b20c744c7e) — Memo · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
