# Mechanical Technology Grade 12 November 2024 NSC Memo (Eng)

> Grade 12 Mechanical Technology memorandum from the November 2024 NSC (English), 19 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-mg-eng-docx/705fced4-8282-45d5-aa8f-010ba6d20d97
- Updated: 2026-10-29
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2024
- Exam period: November 2024 NSC
- Curriculum: CAPS
- Pages: 19

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 November 2024 NSC Memo (Eng)](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-mg-eng-docx/705fced4-8282-45d5-aa8f-010ba6d20d97)

## About this document

Mechanical Technology · Grade 12 · November 2024 NSC · 2024. Memorandum. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

NATIONAL
                              SENIOR CERTIFICATE

                                     GRADE 12

                     MECHANICAL TECHNOLOGY: AUTOMOTIVE

                                   NOVEMBER 2024

                               MARKING GUIDELINES

MARKS: 200

                      These marking guidelines consist of 19 pages.

Copyright reserved                                                    Please turn over

### Page 2

Mechanical Technology: Automotive           2                  DBE/November 2024
                                    NSC – Marking Guidelines

 QUESTION 1: MULTIPLE-CHOICE (GENERIC)

 1.1        A✓                                                                       (1)

 1.2        D✓                                                                       (1)

 1.3        A✓                                                                       (1)

 1.4        B✓                                                                       (1)

 1.5        D✓                                                                       (1)

 1.6        C✓                                                                       (1)
                                                                                     [6]

Copyright reserved                                                Please turn over

### Page 3

Mechanical Technology: Automotive           3                             DBE/November 2024
                                    NSC – Marking Guidelines

 QUESTION 2: SAFETY (GENERIC)

 2.1       Horizontal band saw (Already been switched on):
           • Never leave the band saw unattended while in motion. ✓
           • Switch off the band saw when leaving. ✓
           • Use a brush or wooden rod to remove chips/swarf/filings. ✓
           • When reaching around a revolving band saw, be careful that your clothes
              do not get caught in the blade. 
           • Don't stop a revolving bandsaw blade with your hand. ✓
           • Don't adjust the band saw while working. ✓
           • Don't open any guard while in motion. ✓
           • Keep hands away from action points. ✓
           • Do not force the band saw blade into the material. ✓
           • Apply cutting fluid if required. ✓
           • Avoid overcrowding of persons around the machine. ✓
           • Do not lean on the machine. ✓
           • Check if the machine is running smoothly. ✓
                                                                         (Any 2 x 1)          (2)

 2.2       First aid basic treatment:
           • Examination ✓
           • Diagnosis ✓
           • Treatment ✓                                                                      (3)

 2.3       Oxygen fittings with oil and grease:
           It forms a flammable mixture. ✓                                                    (1)

 2.4       Disadvantages of the process layout:
           • Production is not always continuous. ✓
           • Transportation costs between process departments may be high. ✓
           • Additional time is spent in testing and sorting as the product moves to
              the different departments. ✓
           • Damage to fragile goods may result from extra handling. ✓
                                                                         (Any 2 x 1)          (2)

 2.5       Advantages of the product layout:
           • Handling of material is limited to a minimum. ✓
           • Time period of manufacturing cycle is less. ✓
           • Production control is almost automatic. ✓
           • Control over operations is easier. ✓
           • Greater use of unskilled labour is possible. ✓
           • Less total inspection is required. ✓
           • Less total floor space is needed per unit of production. ✓
                                                                            (Any 2 x 1)       (2)
                                                                                               [10]

Copyright reserved                                                            Please turn over

### Page 4

Mechanical Technology: Automotive           4                            DBE/November 2024
                                    NSC – Marking Guidelines

 QUESTION 3: MATERIALS (GENERIC)

 3.1       Filing test:

           3.1.1      Files easily                                                          (1)

           3.1.2      Hard to file                                                          (1)

           3.1.3      Files easily                                                          (1)

 3.2       Heat treatment:

           It is the heating  and cooling  of metals under controlled conditions / as
           to change their properties.                                                      (3)

 3.3       Heating of metal:

           If metal is heated too fast, the outside of the metal becomes hotter  than
           the inside,  then it is very difficult  to achieve a uniform structure.        (4)

 3.4       Case hardening:

           •   Low-carbon steel / Mild steel 
           •   Low-alloy steel                                                              (2)

 3.5       Tempering:

           •   It is to relieve the strains induced during the hardening process. 
           •   Increase toughness. 
           •   Decrease brittleness. 
           •   Achieve a finer grain structure. 
                                                                             (Any 1 x 2)     (2)
                                                                                             [14]

Copyright reserved                                                            Please turn over

### Page 5

Mechanical Technology: Automotive           5                  DBE/November 2024
                                    NSC – Marking Guidelines

 QUESTION 4: MULTIPLE-CHOICE (SPECIFIC)

 4.1       C✓                                                                      (1)

 4.2       B✓                                                                      (1)

 4.3       C✓                                                                      (1)

 4.4       B✓                                                                      (1)

 4.5       D✓                                                                      (1)

 4.6       A✓                                                                      (1)

 4.7       B✓                                                                      (1)

 4.8       C✓                                                                      (1)

 4.9       C✓                                                                      (1)

 4.10      C✓                                                                      (1)

 4.11      D✓                                                                      (1)

 4.12      B✓                                                                      (1)

 4.13      C✓                                                                      (1)

 4.14      D✓                                                                      (1)
                                                                                   [14]

Copyright reserved                                                 Please turn over

### Page 6

Mechanical Technology: Automotive           6                             DBE/November 2024
                                    NSC – Marking Guidelines

 QUESTION 5: TOOLS AND EQUIPMENT (SPECIFIC)

 5.1       Compression test procedures:

           5.1.1      Air filter removed:
                      • To allow maximum amount of air to enter the cylinder. ✓
                      • To get the correct reading ✓
                                                                         (Any 1 x 1)              (1)

           5.1.2      Clean around spark plug:
                      Avoid dirt falling into the engine through the spark plug hole. ✓       (1)

           5.1.3      Disconnect ignition system:
                      • To prevent a spark developing. ✓
                      • To prevent a fire hazard. ✓
                      • To prevent the possibility of shock. ✓
                                                                             (Any 1 x 1)          (1)

           5.1.4      Record readings:
                      • To check if there is a difference in the compression between
                        each cylinder. ✓
                      • To compare the compression in all cylinders to the
                        specification. ✓
                                                                          (Any 1 x 1)             (1)

 5.2       Cylinder leakage tester:

           5.2.1      Labels:
                      A. Pressure regulator ✓
                      B. Adapter hose/pipe ✓
                      C. Leakage gauge ✓                                                      (3)

           5.2.2      Unit of measurement:
                      kPa/Bar/PSI ✓                                                           (1)

           5.2.3      Unit of measurement:
                      Percentage (%) ✓                                                        (1)

Copyright reserved                                                             Please turn over

### Page 7

Mechanical Technology: Automotive           7                             DBE/November 2024
                                    NSC – Marking Guidelines

 5.3       Exhaust gas analyser:
           • The hot exhaust system should not be touched with the bare hand. 
           • Perform the test in a well-ventilated area. 
           • Keep hands and tools clear from moving engine parts. 
           • Place the analyser in a secure position to prevent it from falling. 
           • The inlet hose must not be restricted in any way. 
           • The hose connections must be airtight. 
           • Ensure no exhaust, manifolds or vacuum system leaks. 
           • Condensate must be blown out of the hoses. 
           • The condenser must be drained after each test. 
           • When the paper filter becomes light grey, it should be changed. 
           • The exhaust gas filter must be changed regularly. 
           • Wear all necessary PPE. 
           • Ensure that the gas analyser is safely connected to the battery. 
                                                                              (Any 4 x 1)     (4)

 5.4       On-board diagnostic scanner:
           • Scan diagnostic trouble codes 
           • Clear the trouble codes 
           • Programme (e.g. make adjustment to electronic control unit) 
           • Retrieve information 
                                                                          (Any 2 x 1)         (2)

 5.5       Wheel balancing machine:

           5.5.1      Identify:
                      Wheel balancing machine ✓                                               (1)

           5.5.2      Functions:
                      • Balance a wheel dynamically. ✓
                      • Balance a wheel statically. ✓                                         (2)

           5.5.3      Safety device:
                      Safety cover/hood/guard ✓                                               (1)

           5.5.4      Calibration reason:
                      So that the machine can display accurate/optimum results.              (1)

 5.6       Measure camber with the bubble gauge:
           1. Ensure bubble gauge is on the centre of the wheel hub. 
           2. Level bubble gauge. 
           3. Read the CAMBER angle.                                                         (3)
                                                                                              [23]

Copyright reserved                                                             Please turn over

### Page 8

Mechanical Technology: Automotive              8                            DBE/November 2024
                                       NSC – Marking Guidelines

 QUESTION 6: ENGINES (SPECIFIC)

 6.1       Function of the crankshaft:
           To convert reciprocating motion  into rotary motion.                               (2)

 6.2       Part attached to crankshaft nose:
           Vibration damper                                                                    (1)

 6.3       Reciprocating mass kept light:
           • To reduce engine vibrations. 
           • Less twisting force acting on the crankshaft. 
           • The engine is able to reach its speed sooner. 
           • Reduced rate of wear on the bore. 
                                                                               (Any 1 x 1)      (1)

 6.4       Obtain the firing order:
           • Determine which valves are the inlet or which are the exhaust valves. 
           • Turn the engine in the direction it rotates. 
           • Observe the order in which the valves open to determine the firing
             order.                                                                            (3)

 6.5       Engine configuration:

           6.5.1      Type of engine configuration:
                      Flat engine/boxer type engine/horizontally opposed engine                    (1)

           6.5.2      Labels:
                      A. Connecting rod 
                      B. Piston 
                      C. Crankshaft/Crankshaft nose                                                (3)

 6.6       Crankpins of six-cylinder in-line engine:

                                    120°

                       120°                  120°
                                                         • THREE crankpins 
                                                         • Position of crankpins 
                                                         • Angles labeled 
                                                                                                (3)

Copyright reserved                                                               Please turn over

### Page 9

Mechanical Technology: Automotive           9                          DBE/November 2024
                                    NSC – Marking Guidelines

 6.7       Turbochargers:

           6.7.1      Advantages:
                      • Increases engine torque. 
                      • Increases engine power. 
                      • Increases volumetric efficiency. 
                      • Improves fuel consumption. 
                      • No engine power sapped./Driven by exhaust gases. 
                      • Power loss due to low atmospheric pressure/high altitude
                        eliminated. 
                      • Smaller capacity engine required for similar power output. 
                      • It is generally cheaper than a supercharger. 
                                                                          (Any 3 x 1)      (3)

           6.7.2      Synthetic oil for turbochargers:
                      • Can withstand high pressures. 
                      • Can withstand high temperatures. 
                      • Higher flash point. 
                      • Tends to have a low viscosity. 
                      • Capable of better cooling. 
                      • Faster flow rate. 
                                                                         (Any 2 x 1)       (2)

           6.7.3      Turbocharger without vanes:
                      Non-variable turbocharger                                           (1)

 6.8       Turbocharger terms:

           6.8.1      Boost:
                      Increase of intake manifold pressure  above atmospheric
                      pressure.                                                           (2)

           6.8.2      Turbo lag:
                      The delay between pressing the accelerator pedal  and feeling
                      the turbo kick in.                                                  (2)

 6.9       Supercharger:

           6.9.1      Identify supercharger:
                      Twin-Screw supercharger                                                 (1)

           6.9.2      Label supercharger:
                      A. Pulley 
                      B. Casing/housing 
                      C. Twin screw                                                           (3)
                                                                                               [28]

Copyright reserved                                                          Please turn over

### Page 10

Mechanical Technology: Automotive               10                                DBE/November 2024
                                         NSC – Marking Guidelines

 QUESTION 7: FORCES (SPECIFIC)

 7.1       Definition of terms:

           7.1.1         Clearance volume:
                         The volume of the space above the piston crown  in the cylinder
                         when the piston is at TDC.                                                  (2)

           7.1.2         Compression ratio:
                         The relationship between the total volume  and the clearance
                         volume  of a cylinder.                                                      (2)

 7.2       Calculate the work done:
           Work = force  distance                                  Work = force  distance
                     = F s                                              = F s
                     = (690  10 )  2              OR                 = ( 690  9,81)   2 
                     = 13800 J                                           = 13537,8 J 
                                   
                     = 13 ,8 k J                                         = 13,54 k J                  (3)

 7.3       Methods to lower the clearance volume:
           • Fit thinner gasket between cylinder block and cylinder head. 
           • Fit piston with suitable higher crowns. 
           • Machine (Skim) cylinder head. 
           • Machine (Skim) engine block. 
                                                                           (Any 2 x 1)                (2)

 7.4       Cylinder:

           7.4.1         Labels:
                            A. Stroke length 
                            B. Bore/cylinder diameter                                                    (2)

           7.4.2         Calculate the swept volume:
                                          π D2
                         Swept volume =           L
                                             4
                                            8,3 2 
                                        =              7,9 
                                              4
                                        = 427,44 cm 3                                                    (3)

           7.4.3         Calculate the clearance volume:
                                   SV
                         CV =
                                 CR − 1
                                427 , 44 
                              =
                                  9 −1 
                                   = 53,43 cm 3                                                          (3)

Copyright reserved                                                                     Please turn over

### Page 11

Mechanical Technology: Automotive             11                         DBE/November 2024
                                       NSC – Marking Guidelines

 7.5       Calculate the indicated power:

               P = 1400  10 3
                       110
               L=
                      1000
                    = 0,11 m 
                  π D2
           Area =
                     4
                   π  0,1 2 
                =
                       4
                = 0,00785398 m 2 
                      3600
               N=            
                      60  2
                    = 30 firing strokes per second   

           IP = PLANn
                (             )
              = 1400  10 3  (0, 11)  (0,00785398 )  (30 )  (4 ) 
              = 145 ,14 kW                                                                     (7)

 7.6       Calculations:

           7.6.1        Torque:
                                  Torque = Force  radius
                                                  350
                                         = 50       
                                                 1000
                                         = 17,5 Nm                                             (3)

           7.6.2        Brake power:
                              BP = 2 NT
                                              2000
                                     = 2          17,5 
                                               60
                                     = 3,67 kW                                                 (3)

           7.6.3        Mechanical efficiency:
                                   BP
                            ME =        100
                                   IP
                                  3,67
                                =          100
                                   50
                                = 7,33 %                                                       (2)
                                                                                                [32]

Copyright reserved                                                           Please turn over

### Page 12

Mechanical Technology: Automotive            12                            DBE/November 2024
                                      NSC – Marking Guidelines

 QUESTION 8: MAINTENANCE (SPECIFIC)

 8.1       Exhaust gas analysis:

           High carbon monoxide (CO) reading:

           8.1.1 POSSIBLE CAUSES                  8.1.2 CORRECTIVE MEASURES

           • Too rich mixture. ✓                • Reset/adjust the air fuel mixture. ✓
           • Dirty or restricted air filter. ✓  • Replace/Clean air filter. ✓
           • Ignition misfire. ✓                • Repair ignition misfire. ✓
           • Thermostat stuck open. ✓           • Replace thermostat. ✓
           • Faulty coolant sensor. ✓           • Replace coolant sensor. ✓
           • Blocked PCV valve. ✓               • Unblock/clean/replace PCV valve. ✓
           • Faulty catalytic convertor. ✓      • Replace catalytic convertor. ✓
           • Carburettor flooding. ✓            • Correct carburettor fault. ✓
           • Choke valve stuck closed. ✓        • Repair choke valve. ✓
           • Fuel pressure too high. ✓          • Check and repair the return fuel line
                                                  of restrictions or kinks. ✓
                                                • Replace fuel pressure regulator✓
                                                • Select correct pump according to
                                                  vehicle specification. ✓
                                    (Any 1 x 1)                               (Any 1 x 1)

           Low carbon dioxide (CO2) reading:

           8.1.3 POSSIBLE CAUSES                  8.1.4 CORRECTIVE MEASURES

           • Incorrect air-fuel mixture. ✓  • Reset/ adjust the air fuel mixture. ✓
           • Dirty or restricted air filter. ✓
                                            • Replace/Clean air filter. ✓
           • Ignition misfire. ✓            • Repair ignition misfire. ✓
           • Thermostat stuck open. ✓       • Replace thermostat. ✓
           • Faulty coolant sensor. ✓       • Replace coolant sensor. ✓
           • Blocked PCV valve. ✓           • Unblock clean/replace PCV valve. ✓
           • Faulty catalytic convertor. ✓  • Replace catalytic convertor. ✓
           • Carburettor flooding. ✓        • Correct carburettor fault. ✓
           • Choke valve stuck closed. ✓    • Repair choke valve. ✓
           • Fuel pressure too high. ✓      • Check and repair the return fuel line
                                              of restrictions or kinks. ✓
                                            • Replace fuel pressure regulator✓
                                            • Select correct pump according to
                                              vehicle specification. ✓
           • Exhaust gas leaks. ✓           • Repair exhaust leaks. ✓
           • Vacuum leaks on the intake. ✓ • Repair vacuum leaks on the intake. ✓
                                (Any 1 x 1)                               (Any 1 x 1)             (4)

Copyright reserved                                                             Please turn over

### Page 13

Mechanical Technology: Automotive          13                              DBE/November 2024
                                    NSC – Marking Guidelines

 8.2       Compression test:

           8.2.1      Maximum variation allowed:
                      10% ✓                                                                       (1)

           8.2.2      Low compression reading:

           POSSIBLE CAUSES                         CORRECTIVE MEASURES
           • Worn rings. ✓                         • Fit new rings. ✓
           • Worn piston. ✓                        • Fit new pistons. ✓
           • Worn bore. ✓                          • Re-bore the cylinders or resleeve. ✓
           • Leaking inlet valve. ✓                • Replace or lap valve. ✓
           • Leaking exhaust valve. ✓              • Replace or lap valve. ✓
           • Blown head gasket. ✓                  • Replace head gasket. ✓
           • Cracked cylinder head. ✓              • Replace or repair cylinder head. ✓
           • Cracked engine block. ✓               • Replace engine block. ✓
                                   (Any 1 x 1)                                (Any 1 x 1)         (2)

 8.3       Cylinder leakage test locations:
           • Exhaust pipe/system ✓
           • Intake system ✓
           • Oil filler hole ✓
           • Dipstick ✓
           • Expansion tank/radiator ✓
           • Adjacent spark plug hole ✓
                                                                             (Any 4 x 1)       (4)

 8.4       Causes of a low oil pressure reading:
           • Blocked strainer ✓
           • Worn oil pump ✓
           • Oil viscosity too low ✓
           • Dirty oil ✓
           • Low oil level ✓
           • Blocked oil filter ✓
           • Blocked oil channels ✓
           • Excessive oil clearances ✓
           • Defective pressure relief valve ✓
                                                                             (Any 4 x 1)       (4)

 8.5       High fuel pressure reading:

           POSSIBLE CAUSES                      CORRECTIVE MEASURES
           • Restriction in the return fuel line• Check and repair the return fuel line
             post the fuel tester. ✓              of restrictions or kinks. ✓
           • Faulty fuel pressure regulator. ✓  • Replace fuel pressure regulator. ✓
           • Wrong fuel pump used. ✓            • Select correct pump according to
                                                  vehicle specification. ✓
                                    (Any 2 x 1)                               (Any 2 x 1)         (4)

Copyright reserved                                                             Please turn over

### Page 14

Mechanical Technology: Automotive          14                      DBE/November 2024
                                    NSC – Marking Guidelines

 8.6       Cooling system pressure test manufacturers' specifications:
           • Coolant (Antifreeze-water) ratio. ✓
           • Pressure in the cooling system. ✓
           • Pressure on the radiator cap. ✓
                                                                     (Any 2 x 1)       (2)

 8.7       Functions of the radiator cap:
           • Regulate the cooling system pressure. ✓
           • Seals the cooling system from leaks. ✓
           • Allows coolant to be drawn back into the radiator when engine cools
             down. ✓
                                                                     (Any 2 x 1)          (2)
                                                                                          [23]

Copyright reserved                                                     Please turn over

### Page 15

Mechanical Technology: Automotive          15                              DBE/November 2024
                                    NSC – Marking Guidelines

 QUESTION 9: SYSTEMS AND CONTROL (AUTOMATIC GEARBOX) (SPECIFIC)

 9.1       Disadvantages of automatic gearbox:
           • More expensive to manufacture. ✓
           • Repairs are expensive. ✓
           • Special tools and training needed to repair gearbox. ✓
           • Special towing techniques must be used when towed over a long
             distance. ✓
           • Generally heavier than a manual gearbox. ✓
           • Vehicle cannot be push-started. ✓
                                                                    (Any 2 x 1)                (2)

 9.2       Torque converter operation:
           • The spinning pump/impeller throws the oil into the vanes of the turbine. ✓
           • This turbine rotates the gearbox input shaft. ✓
           • The oil circulates through the turbine vanes and strikes the stator. ✓
           • The stator redirects the path of the oil in the direction of pump rotation. ✓
           • Torque is multiplied when it leaves the pump again to enter the turbine. ✓        (5)

 9.3       Single epicyclic gear system:

                                                    
                                              Annulus
                                                    
                                              Planetary
                                                Gear

                                                    
                                              Planetary
                                               Carrier
                                                   
                                              Sun Gear
                             A                                            B
           • Complete sketch ✓
                         Candidate may draw either sketches A or B.                            (5)

 9.4       Advantages of gear ratios:

           9.4.1      Forward reduction (1st gear):
                      • Improved pull away of vehicle. ✓
                      • Increased torque output. ✓
                      • Easier hill climbing. ✓                                                    (1)

           9.4.2      Reverse gear:
                      Vehicle is able to travel backwards. ✓                                       (1)

Copyright reserved                                                              Please turn over

### Page 16

Mechanical Technology: Automotive          16                          DBE/November 2024
                                    NSC – Marking Guidelines

           9.4.3      Forward overdrive (5th gear):
                      • Increase speed ✓
                      • Decrease engine revolutions ✓
                      • Better fuel economy ✓
                                                                         (Any 1 x 1)          (1)

 9.5       Components relating to an automatic gearbox:

           9.5.1      Hydraulic pistons:
                      • Control the brake bands which allows for the change of gear
                        ratio. ✓
                      • Engage the clutches which allows for the change of gear
                        ratio. ✓
                                                                        (Any 1 x 1)           (1)

           9.5.2      Brake bands:
                      The brake band holds the annulus stationary. ✓                          (1)

           9.5.3      Transmission control unit:
                      It controls the electronic gear shifting in an automatic
                      gearbox. ✓                                                              (1)
                                                                                              [18]

Copyright reserved                                                         Please turn over

### Page 17

Mechanical Technology: Automotive          17                              DBE/November 2024
                                    NSC – Marking Guidelines

 QUESTION 10: SYSTEMS AND CONTROL (AXLES, STEERING GEOMETRY
 AND ELECTRONIC) (SPECIFIC)

 10.1      Tyre wear pattern:

           10.1.1     Cause the tyre wear pattern:
                      Camber ✓                                                                     (1)

           10.1.2     Faults on the vehicle suspension:
                      • Suspension misalignment ✓
                      • Worn wheel bearings ✓
                      • Bent strut ✓
                      • Bent/Damaged lower control arms ✓
                      • Damaged lower control arms bushes ✓
                      • Damaged strut mountings ✓
                      • Worn ball joints ✓
                                                                             (Any 2 x 1)           (2)

           10.1.3     Correct tyre wear cause:
                      • Re-align suspension ✓
                      • Replace wheel bearings ✓
                      • Replace strut ✓
                      • Replace lower control arm ✓
                      • Replace lower control arm bushes ✓
                      • Replace strut mountings ✓
                      • Replace ball joints ✓
                                                                             (Any 2 x 1)           (2)

 10.2      Definitions of alignment angles:

           10.2.1     Positive caster:
                      Positive caster is the backward tilt of the king pin at the top, ✓
                      when viewed from the side. ✓                                                 (2)

           10.2.2     King pin inclination:
                      King pin inclination is the inward tilt of the top ✓ of the king pin
                      viewed from the front. ✓                                                     (2)

 10.3      Air-intake system sensors:
           • Throttle position sensor (TPS) ✓
           • Manifold absolute pressure sensor (MAP) ✓
           • Mass air flow sensor (MAF) ✓
           • Air intake temperature sensor. ✓
                                                                             (Any 3 x 1)       (3)

 10.4      Function of knock sensor:
           • Senses engine knock. ✓
           • Sends signal to the ECU. ✓                                                        (2)

Copyright reserved                                                              Please turn over

### Page 18

Mechanical Technology: Automotive             18                    DBE/November 2024
                                      NSC – Marking Guidelines

 10.5      Components of Distributorless Ignition System (DIS):
           • ECU ✓
           • Integrated coil ✓
           • Spark plug ✓
           • Ignition switch ✓
           • Crankshaft position sensor ✓
                                                                           (Any 2 x 1)     (2)

 10.6      Catalytic convertor:
           • Oxidation ✓
           • Reduction ✓                                                                   (2)

 10.7      Functions of the speed control system:
           • Controls the throttle opening electronically. ✓
           • Keeps the vehicle at a constant speed. ✓                                      (2)

 10.8      Alternator:

           10.8.1    Labels:
                     A. Pulley ✓
                     B. Front bracket/Front cover/housing ✓
                     C. Bearing ✓
                     D. Stator ✓                                                           (4)

           10.8.2     Rotor:
                      • Contains the slip rings ✓ which provides a movable electrical
                        connection. ✓
                      • Induces current ✓ flow into the stator. ✓
                      • To create a rotating ✓ magnetic field/electromagnet. ✓
                                                                           (Any 1 x 2)     (2)

           10.8.3     Regulator:
                      • Controls voltage ✓
                      • Controls current flow ✓
                                                                           (Any 1 x 1)     (1)

           10.8.4     Function of the rectifier:
                      Converts the AC ✓ to DC. ✓                                           (2)

Copyright reserved                                                      Please turn over

### Page 19

Mechanical Technology: Automotive             19               DBE/November 2024
                                      NSC – Marking Guidelines

 10.9      Injector:
           • The fuel pressure at the injector ✓
           • Injection duration ✓
           • Size of the injector nozzle hole/orifice ✓
           • Throttle position ✓
           • Amount of atmospheric pressure ✓
           • Ambient temperature ✓
           • Air-fuel ratio ✓
           • Engine load ✓
           • Engine speed (RPM) ✓
           • Fuel type ✓
           • Engine temperature✓
           • Fuel temperature✓
                                                                     (Any 3 x 1)     (3)
                                                                                     [32]

                                                                        TOTAL:       200

Copyright reserved

## Related documents

- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — Mechanical Technology · QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — Mechanical Technology · QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — Mechanical Technology · QP · 2024 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Mechanical Technology · Memo · 2023 · Afr
- [MECH TECH GR12 MEMO SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1) — Mechanical Technology · Memo · 2023 · Eng
- [MECHANICAL TECH (Auto) GR12 MEMO SEPT2023 English](https://www.hlayiso.com/library/mechanical-tech-auto-gr12-memo-sept2023-english/dfc975c1-e179-4741-8d4f-e3b20c744c7e) — Mechanical Technology · Memo · 2023 · Eng

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [MEC TECH GR12 MEMO SEPT2023 Fitting English](https://www.hlayiso.com/library/mec-tech-gr12-memo-sept2023-fitting-english/48945e78-f50a-4241-bab7-b94b61c60f49) — Memo · 2023 · Eng
- [MECH TECH GR12 QP SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept2023-welding-english/49e9215c-dc78-48c3-a526-4baaf59158d8) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-eng/1523a16f-2012-4f13-a922-86cbb5900666) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Automotive) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-afr/8d31d25d-e192-4aa9-b448-efab233391a1) — QP · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
