# Mechanical Technology Grade 12 November 2024 NSC Memo (Eng)

> Grade 12 Mechanical Technology memorandum from the November 2024 NSC (English), 19 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechanical-technology-nov-2024-welding-metal-work-mg-eng/b8312fc4-1011-4937-9064-e8f6e98e0522
- Updated: 2026-10-29
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2024
- Exam period: November 2024 NSC
- Curriculum: CAPS
- Pages: 19

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 November 2024 NSC Memo (Eng)](https://www.hlayiso.com/library/mechanical-technology-nov-2024-welding-metal-work-mg-eng/b8312fc4-1011-4937-9064-e8f6e98e0522)

## About this document

Mechanical Technology · Grade 12 · November 2024 NSC · 2024. Memorandum. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

NATIONAL
                              SENIOR CERTIFICATE

                                     GRADE 12

        MECHANICAL TECHNOLOGY: WELDING AND METALWORK

                                  NOVEMBER 2024

                               MARKING GUIDELINES

MARKS: 200

                     These marking guidelines consists of 19 pages.

Copyright reserved                                                    Please turn over

### Page 2

Mechanical Technology: Welding and Metalwork 2                 DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 1: MULTIPLE-CHOICE (GENERIC)

1.1       A✓                                                                     (1)

1.2       D✓                                                                     (1)

1.3       A✓                                                                     (1)

1.4       B✓                                                                     (1)

1.5       D✓                                                                     (1)

1.6       C✓                                                                     (1)
                                                                                 [6]

Copyright reserved                                                  Please turn over

### Page 3

Mechanical Technology: Welding and Metalwork 3                           DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 2: SAFETY (GENERIC)

2.1       Horizontal band saw (Already been switched on):
          • Never leave the band saw unattended while in motion. ✓
          • Switch off the band saw when leaving. ✓
          • Use a brush or wooden rod to remove chips/swarf/filings. ✓
          • When reaching around a revolving band saw, be careful that your
             clothes do not get caught in the blade. 
          • Don't stop a revolving bandsaw blade with your hand. ✓
          • Don't adjust the band saw while working. ✓
          • Don't open any guard while in motion. ✓
          • Keep hands away from action points. ✓
          • Do not force the band saw blade into the material. ✓
          • Apply cutting fluid if required. ✓
          • Avoid overcrowding of persons around the machine. ✓
          • Do not lean on the machine. ✓
          • Check if the machine is running smoothly. ✓
                                                                       (Any 2 x 1)        (2)

2.2       First aid basic treatment:
          • Examination ✓
          • Diagnosis ✓
          • Treatment ✓                                                                   (3)

2.3       Oxygen fittings with oil and grease:
          It forms a flammable mixture. ✓                                                 (1)

2.4       Disadvantages of the process layout:
          • Production is not always continuous. ✓
          • Transportation costs between process departments may be high. ✓
          • Additional time is spent in testing and sorting as the product moves to
             the different departments. ✓
          • Damage to fragile goods may result from extra handling. ✓
                                                                        (Any 2 x 1)       (2)

2.5       Advantages of the product layout:
          • Handling of material is limited to a minimum. ✓
          • Time period of manufacturing cycle is less. ✓
          • Production control is almost automatic. ✓
          • Control over operations is easier. ✓
          • Greater use of unskilled labour is possible. ✓
          • Less total inspection is required. ✓
          • Less total floor space is needed per unit of production. ✓
                                                                          (Any 2 x 1)     (2)
                                                                                           [10]

Copyright reserved                                                           Please turn over

### Page 4

Mechanical Technology: Welding and Metalwork 4                            DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 3: MATERIALS (GENERIC)

3.1       Filing test:

          3.1.1      Files easily                                                          (1)

          3.1.2      Hard to file                                                          (1)

          3.1.3      Files easily                                                          (1)

3.2       Heat treatment:

          It is the heating  and cooling  of metals under controlled conditions / as
          to change their properties.                                                      (3)

3.3       Heating of metal:

          If metal is heated too fast, the outside of the metal becomes hotter  than
          the inside,  then it is very difficult  to achieve a uniform structure.        (4)

3.4       Case hardening:

          •   Low-carbon steel / Mild steel 
          •   Low-alloy steel                                                              (2)

3.5       Tempering:

          •   It is to relieve the strains induced during the hardening process. 
          •   Increase toughness. 
          •   Decrease brittleness. 
          •   Achieve a finer grain structure. 
                                                                            (Any 1 x 2)     (2)
                                                                                            [14]

Copyright reserved                                                             Please turn over

### Page 5

Mechanical Technology: Welding and Metalwork 5                 DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 4: MULTIPLE-CHOICE (SPECIFIC)

4.1       D✓                                                                    (1)

4.2       B✓                                                                    (1)

4.3       D✓                                                                    (1)

4.4       B✓                                                                    (1)

4.5       C✓                                                                    (1)

4.6       B✓                                                                    (1)

4.7       C✓                                                                    (1)

4.8       D✓                                                                    (1)

4.9       B✓                                                                    (1)

4.10      A✓                                                                    (1)

4.11      C✓                                                                    (1)

4.12      A✓                                                                    (1)

4.13      B/C ✓                                                                 (1)

4.14      D✓                                                                    (1)
                                                                                [14]

Copyright reserved                                                 Please turn over

### Page 6

Mechanical Technology: Welding and Metalwork 6                           DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 5: TERMINOLOGY (TEMPLATES) (SPECIFIC)

5.1       Template loft separation:
          • It is quieter. ✓✓
          • The lighting is better. ✓✓
          • All equipment is readily available. ✓✓
          • It is a permanent base. ✓✓
          • Marking on the floor enhances accuracy. ✓✓
          • Specialists works in the template loft. / More specialised work is done in
             the template loft. ✓✓
                                                                          (Any 1 x 2)       (2)

5.2       Template loft tools: (Due to the large number of alternatives, marker
          discretion must be used - discuss with IM).
          • Hand saws ✓
          • Chisels ✓
          • Plane ✓
          • Drill and drill bits ✓
          • Steel tape ✓
          • Straight edge ✓
          • Compass ✓
          • Trammel pins ✓
          • Carpenter's square ✓
          • Protractor ✓
          • Chalk line ✓
          • Clamps. ✓
                                                                       (Any 3 x 1)         (3)

5.3       Steel ring calculations:

          5.3.1      Mean Ø = Outside Ø − Plate thickness
                              = 980 − 25 ✓
                              = 955 mm ✓                                                   (2)

          5.3.2      Mean circumfere nce = π × Mean Ø
                                           = π × 955 ✓
                                           = 3000,22 ✓
                                           = 3000 mm ✓                                      (3)

Copyright reserved                                                            Please turn over

### Page 7

Mechanical Technology: Welding and Metalwork 7                              DBE/November 2024
                                    NSC – Marking Guidelines

5.4       Factors for selecting materials for templates:

          •   Durability ✓
          •   Cost effective ✓
          •   Light weight ✓
          •   Moisture resistant ✓
          •   Flexible ✓
          •   Size ✓
          •   Accuracy required ✓
                                                                             (Any 2 x 1)     (2)

5.5       Fillet weld on T–joint:

                                                    ✓             ✓
                                                               ✓ 50     ✓
                                                 ✓ 10               – 100          ✓
                                                                                 Arc
                                     ✓                         ✓
                                          ✓

                                                                                                   (9)

5.6       Welding symbols:

          5.6.1      Spot weld:

                                                      X        ✓
                                                                                                (1)

          5.6.2      Seam weld:
                                                               ✓
                                                                                               (1)
                                                                                              [23]

Copyright reserved                                                              Please turn over

### Page 8

Mechanical Technology: Welding and Metalwork 8                          DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC)

6.1       Working principles of:

          6.1.1      Punch and cropping machine:
                     • Cropping machines are electrically driven. ✓
                     • Uses a heavy fly wheel/hydraulics and clutch system. ✓
                     • It engages various blades/punches. ✓
                     • Uses shearing/punching motion to cut the various profiles. ✓       (4)

          6.1.2      Resistance welding machine:
                     • Current flows through a resistance to fuse plates together. 
                     • Two copper electrodes are pressed against the plates. 
                     • Heavy current is passed between the electrodes. 
                     • The two plates melt and fuse together, forming a weld
                        nugget or spot weld.                                             (4)

6.2       Uses of the drill press:

          •   Drilling ✓
          •   Ream work ✓
          •   Countersinking ✓
          •   Sawing – hole saw ✓
          •   Sanding ✓
          •   Wire brushing ✓
          •   Buffing/Polishing ✓
          •   Boring ✓
          •   Tapping ✓
          •   Spot facing ✓
          •   Honing ✓
                                                                         (Any 3 x 1)      (3)

6.3       Types of taps:
          • Taper tap/starting tap/first tap ✓
          • Intermediate/second tap ✓
          • Plug or bottoming tap ✓                                                        (3)

6.4       Brinell hardness test procedure:
          • Makes use of a steel ball as indenter. ✓
          • A load is applied to the test piece. ✓
          • The diameter of the indentation is measured with a microscope. ✓
          • The diameter is used to determine the Brinell reading. ✓                       (4)
                                                                                           [18]

Copyright reserved                                                           Please turn over

### Page 9

Mechanical Technology: Welding and Metalwork 9                              DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 7: FORCES (SPECIFIC)

7.1       Beams:

           7.1.1     Calculate the reaction left (RL):

                     Take moments about RR:
                                  ✓          ✓          ✓
                     RL ×10 = (50 × 2) + (75 × 5) + (60 × 8)
                              = 100 + 375 + 480
                                955
                          RL =
                                 10
                              = 95,5 N ✓

                     Calculate the reaction right (RR):

                     Take moments about RL:
                                  ✓          ✓          ✓
                     RR ×10 = (60 × 2) + (75 × 5) + (50 × 8)
                              = 120 + 375 + 400
                                895
                          RR =
                                 10
                              = 89,5 N ✓                                                      (8)

          7.1.2      Bending moments:

                     BMB = (95,5  2 ) − (60  0)
                          = 191 Nm ✓

                     BM C = (95,5  5 ) − (60  3) − (75  0) ✓
                           = 297,5 Nm ✓

                     BMD = (95,5  8 ) − (60  6) − (75  3) − (50  0) ✓
                          = 179 Nm ✓                                                          (5)

Copyright reserved                                                              Please turn over

### Page 10

Mechanical Technology: Welding and Metalwork 10                                DBE/November 2024
                                    NSC – Marking Guidelines

7.1.3     Bending moment diagram:

                                                297,5 Nm
                                        ✓                  ✓
                             191 Nm                             179 Nm
                                                     ✓
                         ✓                                                 ✓

                                                                                 ✓
                     0                                                          0

             Note to marker:
              Marker must redraw the bending moment diagram
              according to given scales for marking purposes.                                      (6)

7.2      Stress and Strain:

         7.2.1       Area:

                                                   πD 2
                                                A=
                                                    4
                                                  π(0,038) 2 
                                                =
                                                       4
                                                = 1,13 × 10 -3 m 2 
                                                                                                  (2)

         7.2.2       Stress:                                          

                                                F
                                  Stress =                             
                                                A                 
                                                120  10 3      
                                            =
                                              1,13  10 -3 m 2        
                                                                 
                                            = 106,19 MPa                                        (3)
                                                                   
                                                                 
                                                                  
                                                                
                                                                
                                                                 
                                                                
                                                                 
Copyright reserved                                                                   Please turn over
                                                                  

### Page 11

Mechanical Technology: Welding and Metalwork 11                DBE/November 2024
                                    NSC – Marking Guidelines

         7.2.3       Strain:

                          Δl
                      ε =
                          ol
                          0,55 
                      ε =
                           125 
                        = 0,0044     or   4,4 ×10 -3                           (3)
                                                          
         7.2.4       Calculation of  Young's
                                             Modulus:
                            stress                    
                      E =
                            strain     
                           106,19 
                         =                            
                           4,4 10 -3 
                                                     
                         = 24,13 GPa                                           (3)
                                                      
                                        
                                         
                                         
                                            
                                            
                                           
                                           
                                           
                                           

                                           
                                           

                                            

Copyright reserved                                                 Please turn over

### Page 12

Mechanical Technology: Welding and Metalwork 12                                    DBE/November 2024
                                    NSC – Marking Guidelines

7.3       Simple frame:

       7.3.1    Space diagram:
                                                      800 N

                                     A                                B
                                                                 

                                                      D
                                                                         

                                                      
                                                                         
                                                      C 
                                                          
                                                   
                                                                                     400 N
                     400 N
                                      3 MARKS FORARROWS 
                                         
                                 1 MARK FOR DRAWING TO SCALE ✓                                      (4)
                                                    
                                                         
                                                 
       7.3.2    Vector diagram:                            
                                                                              a
                                                           
                                                              

                                                                         

                                                                             
                                 d                                           c
                                                                             
                                                          

                                                                             
                                                                        
                                                                             
                                                                              
                                                                              
                                                        
                                                                             b
                                                                              
                                                     
                      NOTE: Draw to scale on transparency for marking purpose
                      Tolerance of 2 mm.                             
                                                                                                   (5)

                                                                             

Copyright reserved                                                                     Please turn over

### Page 13

Mechanical Technology: Welding and Metalwork 13                     DBE/November 2024
                                    NSC – Marking Guidelines

       7.3.3    Magnitude and nature of force:

                 Member        Force                      Nature
                 AD            810 N(790-830) ✓           Strut ✓
                 BD            810 N(790-830) ✓           Strut ✓
                 CD            700 N(680-720) ✓           Tie ✓                       (6)
                                                                                      [45]

Copyright reserved                                                      Please turn over

### Page 14

Mechanical Technology: Welding and Metalwork 14                         DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 8: JOINING METHODS (INSPECTION OF WELD) (SPECIFIC)

8.1      Factors to consider during the inspection of welds:
         • Bead ✓
         • Width
         • Height ✓
         • Fusion
         • Penetration ✓
         • Pits ✓
         • Undercutting ✓
         • Distortion ✓
         • Cracks ✓
         • Spatter ✓
         • No Slag inclusion ✓
         • Proper start of weld ✓
         • Termination of weld ✓
                                                                          (Any 2 x 1)       (2)

8.2      Welding defects:

          8.2.1       Weld spatter:
                     • Too low welding voltages. ✓
                     • Too high welding current. ✓
                     • Arc length too long. ✓
                     • Not applying anti-spatter spray. ✓
                     • Electrode angle too small. ✓
                     • Welding speed incorrect. ✓
                     • Wrong polarity (DC). ✓
                     • Contaminated surface. ✓
                     • Wet electrodes. ✓
                     • Inadequate consumables. (e.g wrong electrodes, not enough
                       shielding gas, etc.) ✓
                                                                      (Any 2 x 1)           (2)

          8.2.2       Cracks:
                     • Wrong selection of electrode. ✓
                     • A restrained welded joint. ✓
                     • Fast cooling. ✓
                     • Improper welding technique. ✓
                     • Absence of preheating and post-heating of the joint. ✓
                     • Parent metal of poor weldability/High carbon content. ✓
                     • High residual stress on the base metal. ✓
                                                                          (Any 2 x 1)       (2)

Copyright reserved                                                            Please turn over

### Page 15

Mechanical Technology: Welding and Metalwork 15                         DBE/November 2024
                                    NSC – Marking Guidelines

8.3      Preventions for welding defects:

         8.3.1        Incomplete penetration:
                     • Use correct arc length. ✓
                     • Use correct electrode angle. ✓
                     • Use correct current setting. ✓
                     • Use correct travel speed. ✓
                     • Use correct joint preparation/Remove mould scale/Clean
                        joint. ✓
                                                                         (Any 2 x 1)       (2)

         8.3.2        Undercutting:
                     • Decrease arc travel speed. ✓
                     • By raising arc voltage. ✓
                     • By lowering arc voltage. ✓
                     • By lowering the current. ✓
                     • Ensure proper joint preparation/Remove mould scale/Clean
                       joint. ✓
                     • Use correct electrode angle. ✓
                                                                        (Any 2 x 1)        (2)

8.4      Label weld dimension:
         A. Penetration ✓
         B. Width ✓
         C. Height/Reinforcement/Cap height/Overfill ✓
         D. Weld bead/Deposited metal ✓
         E. Base metal/Work-piece/Test piece/Parent metal ✓                                (5)

8.5      Machinability test for welded joints:
        • To evaluate the surface finish. ✓
        • To evaluate the integrity of the weld. ✓
        • To evaluate defects such as porosity, inclusions or excessive
          hardness. ✓
        • To determine the ease of machining. ✓
                                                             (Any 2 x 1)                   (2)

8.6      Free-bend test on a welded joint:
        • To determine the percentage elongation of a welded metal. ✓
        • It measures the ductility of the weld deposit. ✓
        • It measures the heat affected area adjacent to the weld. ✓
                                                                          (Any 2 x 1)      (2)

8.7      Label X-ray test:
         A. Gamma ray/X-rays ✓
         B. Radioactive source/X-ray machine ✓
         C. Test piece/Work piece ✓
         D. Photographic film/Film ✓                                                       (4)
                                                                                           (23)

Copyright reserved                                                           Please turn over

### Page 16

Mechanical Technology: Welding and Metalwork 16                           DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC)

9.1      Factors affecting grain size of steel:
        • The prior amount of cold work. ✓
        • The temperature and time of the annealing process. ✓
        • The composition/Type of steel. ✓
        • The melting point. ✓                                                               (4)

9.2      Factors that affect distortion and residual stress:
        • Welding current ✓
        • Type/Size of electrode ✓
        • Cooling rate ✓
        • Size/Thickness of the material ✓
                                                                           (Any 3 x 1)       (3)

9.3      Label iron-carbon equilibrium diagram:
         A. Carbon percentage ✓
         B. Temperature in degrees Celsius ✓
         C. AC3 / Higher critical temperature ✓
         D. AC1 / Lower critical temperature ✓                                               (4)

9.4      Quenching media:
         • Oil ✓
         • Water ✓
         • Brine ✓
         • Air ✓
         • Liquid salts ✓
         • Sand ✓
         • Ash ✓
         • Lime ✓
         • Molten lead ✓
         • Nitrogen air-infused air ✓
                                                                           (Any 2 x 1)       (2)

9.5      Stress relieving:
        • Annealing ✓
        • Tempering ✓
        • Normalising ✓
                                                                           (Any 1 x 1)       (1)

9.6      Definition of terms:

         9.6.1       Distortion:
                     Distortion is the warping ✓ of the base plate caused by heat. ✓         (2)

Copyright reserved                                                             Please turn over

### Page 17

Mechanical Technology: Welding and Metalwork 17                             DBE/November 2024
                                    NSC – Marking Guidelines

         9.6.2       Elastic deformation:
                     Is the ability of a material to regain its shape ✓ after the stresses
                     have been relieved. ✓                                                     (2)
                                                                                               [18]

Copyright reserved                                                               Please turn over

### Page 18

Mechanical Technology: Welding and Metalwork 18                   DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 10: MAINTENANCE (SPECIFIC)

10.1      Maintenance in operating systems:
         • It helps prolong the lifespan of hardware. ✓
         • Minimizes downtime. ✓
         • Improves system security. ✓
         • Ensures efficient operation. ✓
         • Improves safety. ✓
                                                                   (Any 2 x 1)     (2)

10.2      Lack of lubrication:
         • It causes increased friction between moving parts. ✓
         • It causes excessive heat. ✓
         • It causes wear. ✓
         • Potential damage to components. ✓
                                                                   (Any 2 x 1)     (2)

10.3      Overloading machine:
         • Premature failure of machine components. ✓
         • Decreased lifespan. ✓
         • It can create a safety hazard. ✓
                                                                   (Any 2 x 1)     (2)

10.4      Maintenance guidelines for a power saw:
         • Visual checks of electrical wiring. ✓
         • Clearing the workspace. ✓
         • Lubricating moving parts. ✓
         • Monitor wheel bearings. ✓
         • Checking hydraulic oil. ✓
         • Repairing any existing leaks. ✓
         • Check blade tension. ✓
         • Check for proper alignment. ✓
         • Inspect belts for wear. ✓
         • Daily inspect the chip removal system/band guides. ✓
         • Align vice to blade. ✓
         • Check that guards are in place. ✓
         • Blade condition. ✓
                                                                   (Any 2 x 1)     (2)
                                                                                   [8]

Copyright reserved                                                    Please turn over

### Page 19

Mechanical Technology: Welding and Metalwork 19                DBE/November 2024
                                    NSC – Marking Guidelines

QUESTION 11: TERMINOLOGY (DEVELOPMENT) (SPECIFIC)

11.1      Gravity flow:
          To discharge ✓ its content at the bottom. ✓                          (2)

11.2      Value of X:

          X = 40 2 + 30 2 ✓
             = 1600 + 900
                        ✓
             = 2500  ✓
             = 50 mm ✓ ✓
                     ✓                                                         (3)

11.3                ✓
                    ✓
          Square to square off centre hopper:
                     ✓
          11.3.1     B-3:
                              ✓    ✓    ✓
                     B − 3 = 300 + 600 + 850 2
                                2     2

                             = 90000 + 360000 + 722500
                             = 1172500 ✓
                             = 1082,82 mm ✓                                    (5)
                                        ✓
          11.3.2     X-Y:             ✓✓
                                ✓      ✓
                                        ✓
                     X - Y = 250✓ + 850 2
                                 2

                             = 62500 + 722500
                             = 785000    ✓
                             = 886 mm ✓                                        (4)
                                       ✓
          11.3.3     C- 4:             ✓✓
                               ✓       ✓      ✓
                                       ✓ 2 + 850 2
                     C - 4 = 700 2 + 350
                             = 490000 + 122500 + 722500
                             = 1335000 ✓
                             = 1155,42 mm ✓                                    (5)
                                        ✓
11.4     Square to square ✓ hopper on ✓
                                      centre. ✓                                (2)
                                    ✓
                                                                               [21]
                                           ✓
                                                                   TOTAL:      200

Copyright reserved

## Related documents

- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — Mechanical Technology · QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — Mechanical Technology · QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — Mechanical Technology · QP · 2024 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Mechanical Technology · Memo · 2023 · Afr
- [MECH TECH GR12 MEMO SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1) — Mechanical Technology · Memo · 2023 · Eng
- [MECHANICAL TECH (Auto) GR12 MEMO SEPT2023 English](https://www.hlayiso.com/library/mechanical-tech-auto-gr12-memo-sept2023-english/dfc975c1-e179-4741-8d4f-e3b20c744c7e) — Mechanical Technology · Memo · 2023 · Eng

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [MEC TECH GR12 MEMO SEPT2023 Fitting English](https://www.hlayiso.com/library/mec-tech-gr12-memo-sept2023-fitting-english/48945e78-f50a-4241-bab7-b94b61c60f49) — Memo · 2023 · Eng
- [MECH TECH GR12 QP SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept2023-welding-english/49e9215c-dc78-48c3-a526-4baaf59158d8) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-eng/1523a16f-2012-4f13-a922-86cbb5900666) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Automotive) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-afr/8d31d25d-e192-4aa9-b448-efab233391a1) — QP · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
