# Mechanical Technology Grade 12 Gauteng June 2025 Memo (Eng)

> Grade 12 Mechanical Technology memorandum from the Gauteng June Exam 2025 (English), 18 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechanical-technology-welding-and-metalwork-english-june-2025-possible-answers/711febe7-4fe6-4554-b173-b85be3319326
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Language: English
- Document type: Memorandum
- Year: 2025
- Exam period: Gauteng June Exam
- Curriculum: CAPS
- Pages: 18

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 Gauteng June 2025 Memo (Eng)](https://www.hlayiso.com/library/mechanical-technology-welding-and-metalwork-english-june-2025-possible-answers/711febe7-4fe6-4554-b173-b85be3319326)

## About this document

Mechanical Technology · Grade 12 · Gauteng June Exam · 2025 · English. Memorandum, 18 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

JUNE EXAMINATION
               GRADE 12

                   2025
           MARKING GUIDELINES

           MECHANICAL TECHNOLOGY:
           WELDING AND METALWORK

18 pages

### Page 2

MECHANICAL TECHNOLOGY: WELDING
             MARKING GUIDELINES          AND METALWORK             GR12 0625

1.   Welding and Metalwork Marking Guideline instructions:

     1.1     During marking of multiple choice questions, only ONE possible
             answer can be accepted. If the candidate indicated two or more
             responses, ONLY the first response will be recognised and
             marked according to marking guideline.

     1.2     Where the number of responses of the candidate exceeds the
             required number stated in the question, only the first number of
             responses will be accepted. E.g if the question states ‘Name
             THREE …’ and the candidate stated four different responses,
             ONLY the first three will be accepted and recognised.

     1.3     If question numbering of sub-question is not correct according to
             question paper sequence, the responses can be accepted if a
             sequence pattern can be identified.

     1.4     Attention must be given to mark allocation in questions marks
             were allocated to one response for e.g (Any 1 x 2).

     1.5     There must be ONE tick allocated for each mark awarded.

     1.6     An unanswered question must be indicated with wrong tick
             mark.

     1.7     All blank pages in booklet/answer sheet must be crossed out to
             indicate recognition that pages have been seen by the marker.

     1.8     Attention must be given to questions where candidates did not
             complete the question and continue answering further in the
             booklet/answer sheet. Such questions must be continued
             marking and marks awarded if awarded.

     1.9     During calculation marking, pay attention to where the position
             of the tick mark is.

     1.10    If a candidate skipped a step where a tick mark is allocated in
             the marking guideline and the final answer is correct, the total
             amount of tick marks must be indicated by the marker to indicate
             full marks awarded for question correctly answered so that the
             examination assistants can verify marks awarded.

     1.11    If the unit required for calculations is specified in the question,
             the final answer can be considered correct without explicitly
             stating the unit, provided that the numerical value matches the
             unit specified or used in the question.

                                         2

### Page 3

MECHANICAL TECHNOLOGY: WELDING
       MARKING GUIDELINES          AND METALWORK             GR12 0625

1.12   If an incorrect unit is stated in the candidate answer during
       calculations, the answer will be wrong even if the value itself is
       correct.

1.13   Attention during calculation must be given as to different
       methods of obtaining correct answer.

1.14   Pay attention must be given to special marking instructions to
       the marker stated in the marking guideline.

1.15   A red line must be drawn by the marker to indicate the end of
       each question.

1.16   Sub-question total marks must be allocated on the outside
       margins of the booklet pages and NOT on the inside margins.

1.17   Sub-question total marks allocated on the outside margins in line
       with the sub-question and NOT circled.

1.18   Total of question must be indicated on the red line drawn by the
       marker and circled as to indicate marks for particular question.

1.19   Marker must transfer total marks to cover page/first page, sign
       and date the answer sheet to verify correctness of transfer of
       marks to working mark sheets.

                                   3

### Page 4

MECHANICAL TECHNOLOGY: WELDING
              MARKING GUIDELINES   AND METALWORK             GR12 0625

QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)

1.1   A                                                         (1)

1.2   D                                                         (1)

1.3   B                                                         (1)

1.4   C                                                         (1)

1.5   D                                                         (1)

1.6   C                                                         (1)
                                                                 [6]

                                   4

### Page 5

MECHANICAL TECHNOLOGY: WELDING
                   MARKING GUIDELINES           AND METALWORK             GR12 0625

QUESTION 2 SAFETY (GENERIC)

2.1   First aid stages:

      •   Examination ✓
      •   Diagnosis ✓
      •   Treatment ✓                                                                        (3)

2.2   Pressure gauge:

      •   To make sure there are no leakages. ✓
      •   To make sure that the readings are accurate. ✓                      (Any 2 x 1)    (2)

2.3   Safety boots:

      •   To protect one’s feet from falling objects or objects on the floor. 
      •   To protect one’s feet from sparks/ hot work.                                      (1)

2.4   Before turning on an angle grinder:

      •   Make sure that there are no cracks or chips on the grinding disc. 
      •   Safety guard must be in place. 
      •   PPE must be worn. 
      •   Beware of lockable switches in the on position when the machine is plugged
          in and switched on. 
      •   Check for defective cables. 
      •   Secure workpiece properly. Grinding angle to be away from body to prevent
          sparks falling directly onto clothing. 
      •   Check that the correct disk is fitted correctly for the work to be done. 
                                                                               (Any 2 x 1)   (2)

2.5   Power saw safety precautions AFTER operation:

      •   Switch off the machine. ✓                                                          (1)

                                                5

### Page 6

MECHANICAL TECHNOLOGY: WELDING
                      MARKING GUIDELINES          AND METALWORK             GR12 0625

2.6   Safety when operating gas welding equipment:

      •    Always store, transport, and use oxygen and acetylene cylinders in an upright
           position. 
      •    Prevent oil and grease from coming into contact with oxygen cylinders, valves,
           regulators, fittings, and gauges. 
      •    Stand to the side (not in front) of the cylinder nozzles when opening the
           valves. 
      •    Ensure that you open the gas valves very slowly, and never open the
           acetylene valve more than half a turn. 
      •    Always leave the acetylene cylinder's spindle key in place so that the valve
           can be closed quickly in case of an emergency. 
      •    Hoist cylinders in a net or crate.
      •    Never let cylinders fall from heights.
      •    Do not work with open flames near the cylinders. 
      •    Do not strike the cylinders with a hamer. 
      •    Do not use cylinders as rollers. 
                                                                                (Any 3 x 1)   (3)

2.7   Drilling small pieces on a pedestal drill:

      •    Clamp the workpiece securely to the table .
      •    Do not hold it by hand if it slips from the clamp. 
                                                                               (Any 2 x 1)    (2)

2.8   Responsibility of the employer regarding health and safety:

      •    Ensure sufficient lighting 
      •    Ensure sufficient ventilation
      •    Provide first-aid equipment
      •    Provide a safe/clean working environment
      •    Provide personal protective equipment (PPE) 
      •    Provide safety training to employees                               (Any 1 x 1)    (1)

2.9   Workshop layout:

          2.9.1   Product layout. ✓                                                            (1)

          2.9.2   Disadvantages of product layouts:

                  •   Lack of flexibility ✓
                  •   Optimum use of equipment is not possible ✓
                                                                               (Any 2 x 1)     (2)
                                                                                              [18]

                                                   6

### Page 7

MECHANICAL TECHNOLOGY: WELDING
                    MARKING GUIDELINES          AND METALWORK             GR12 0625

QUESTION 3: MATERIALS (GENERIC)

3.1   Conducting the following tests:

      3.1.1     Machining test:

                Cut two unknown samples identical in appearance and size in a
                machine tool, using the same speed and feed for both.
                Compare to known samples of materials.                                      (2)

      3.1.2     Sound test:

               •    Drop the metal on the floor  or hit the metal with a hammer. 
               •    Compare the sound it makes  to known samples. 
                                                                              (Any 1 x 2)    (2)

3.2   Property tested with a bend test:

      Ductility                                                                             (1)

3.3   Heat treatment factors:

      •   Workpiece size 
      •   Quenching rate 
      •   Carbon content                                                                    (3)

3.4   3.4.1     Case hardening:

                To produce a hard case over a tough core.                                  (2)

      3.4.2     Normalising:

                Relieve internal stresses produced by machining, forging and
                welding.                                                                    (2)

3.5   Rapid cooling / quenching medium:

      •   Water
      •   Brine (salted water)
      •   Oil
                                                                             (Any 2 x 1)      (2)
                                                                                            [14]

                                                7

### Page 8

MECHANICAL TECHNOLOGY: WELDING
               MARKING GUIDELINES   AND METALWORK             GR12 0625

QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)

4.1    B                                                        (1)
4.2    C                                                        (1)
4.3    B                                                        (1)
4.4    B                                                        (1)
4.5    C                                                        (1)
4.6    B                                                        (1)
4.7    D                                                        (1)
4.8    B                                                        (1)
4.9    B                                                        (1)
4.10   B                                                        (1)
4.11   C                                                        (1)
4.12   D                                                        (1)
4.13   A                                                        (1)
4.14   C                                                         (1)
                                                                 [14]

                                    8

### Page 9

MECHANICAL TECHNOLOGY: WELDING
                    MARKING GUIDELINES        AND METALWORK             GR12 0625

QUESTION 5: TERMINOLOGY (TEMPLATES) (SPECIFIC)

5.1   Definitions

       5.1.1 Template loft:

               • It is the heart of a structural workshop. 
               • It is a place where more complicated parts of the steel are laid out on
                 the floor in full sizes. 
                                                                             (Any 1 x 2)    (2)

       5.1.2 Plate girders:

              It is a combination of plates and angle iron welded together.               (2)

5.2   Advantages of templates:

      •   Quicker to use to improve mass production. 
      •   Accurate production.
      •   Cheap to manufacture.
      •   Unskilled labour will be able to use it.
      •   Avoid unnecessary wastages/cost effective.
      •   Uniformity in production. 
      •   Can be reused. 
                                                                             (Any 3 x 1)    (3)

5.3   Supplementary symbols:

      The purpose of supplementary symbols is to provide extra information regarding a
      welded joint. ✓                                                                       (1)

5.4   Elements of the welding symbols:

      A – Weld on-site 
      B – Weld size
      C – Weld symbol 
      D – Length of weld 
      E – Pitch of weld 
      F – Tail/Weld method is MIG welding                                                  (6)

                                              9

### Page 10

MECHANICAL TECHNOLOGY: WELDING
                  MARKING GUIDELINES             AND METALWORK             GR12 0625

5.5   Mean diameter and mean circumference calculation:

      5.5.1    Mean diameter = Internal diameter + Plate thickness 
                        = 660 mm + 35 mm 
                        = 695 mm                                                                           (3)

      5.5.2    Mean Circumference = π x mean diameter 
                                 = π x 695 mm 
                                 = 2 183,41 mm 
                                 = 2 183 mm                                                                (4)

                                                        s
      5.5.3

                                                                       Mean diameter    Outside diameter
                   Material
                  thickness

                                                                                                            (3)

5.6   Properties of a template loft:

      •   It is quieter. 
      •   The lighting is better. 
      •   All equipment is at hand. 
      •   Wooden floors need to be clean.
      •   It has a permanent base and centre lines on the floor.
      •   Markings on the floor enhance accuracy. 
                                                                                       (Any 3 x 1)          (3)

5.7   A – Purlin
      B – Rafter 
      C – Incline tie/Internal bracing/strut 
      D – Tie beam 
      E – Shoe plate/Gusset plate                                                                          (5)
                                                                                                           [32]

                                                 10

### Page 11

MECHANICAL TECHNOLOGY: WELDING
                   MARKING GUIDELINES          AND METALWORK             GR12 0625

QUESTION 6: TOOLS AND EQUIPMENT

6.1   6.1.1   Arc welding equipment
              A – Electrode 
              B – Electrode holder 
              C – Arc 
              D – Earth Lead/Clamp lead 
              E – Base/Parent metal                                                       (5)

      6.1.2   Holds the electrode                                                         (1)

6.2   6.2.1   Arc welding machine:

              Arc welding uses a welding power supply to create an electric arc 
              between an electrode and the base metals  which generates heat to
              melt the metals at the welding point to fuse it together.                   (3)

      6.2.2   Spot/Resistance welding equipment:

              This method uses a heating effect which occurs when a current
              flows  through a resistance  to fuse two plates together.                 (4)

      6.2.3   Plasma cutter:

              Creating an electrical channel of ionised gas (plasma),  from the
              plasma cutter itself through the workpiece that is being cut.
              It forms a completed electric circuit  via a grounding clamp.
              Compressed air is blown toward the workpiece through a focused nozzle
              at high speed. 
              A high frequency, electrical arc is then formed within the gas between an
              electrode near or integrated into the gas nozzle and the workpiece itself.
                                                                                          (4)

6.3   Metal inert gas                                                                     (1)

6.4   Hand tool:
      • Chipping hammer 
      • Wire brush 
                                                                            (Any 1 x 1)    (1)

6.5   Horizontal band saw
      • Ensures clean cuts. 
      • Removes shavings/cuttings. 
      • Blade life is prolonged. 
      • Cools the blade. 
      • Cools the metal. 
                                                                            (Any 2 x 1)    (2)

6.6   Functional vertical rolling machine:
      • Rolling thick plates
      • Rolling large diameter workpieces.
                                                                            (Any 1 x 1)     (1)

                                               11

### Page 12

MECHANICAL TECHNOLOGY: WELDING
                    MARKING GUIDELINES         AND METALWORK             GR12 0625

6.7    Oxy-acetylene equipment processes:

       •   Gas welding 
       •   Brazing 
       •   Silver soldering 
       •   Heating/Melting 
       •   Cutting 
                                                                    (Any 1 x 1)   (1)

6.8    Gas welding equipment:                                                     (1)

       6.8.1     Oxygen regulator/Acetylene regulator/regulator
       6.8.2     A Gauge 
                 B Outlet 
                 C Inlet 
                 D Pressure adjusting knob                                       (4)
6.9    Black                                                                     (1)
6.10   To prevent  back feeding/flashback of flame                               (2)
                                                                                  [31]
QUESTION 7: FORCES
7.1                                    300 N                100 N
                                                    B

                                  A     E               F   C

                                        D

                                               12

### Page 13

MECHANICAL TECHNOLOGY: WELDING
                  MARKING GUIDELINES                 AND METALWORK             GR12 0625

                                                               a

                                                 e             d

                MEMBER      FORCE (N)    NATURE
                AE          140 N       STRUT            b             f
                EF          285 N       STRUT 
                FC          140 N       STRUT 
                BF          100 N       TIE 
                ED          100 N       TIE 
                                                           c

      Note to markers 7.1 and 7.2 must have a template drawn to scale to check
      the size of the drawings when marking the paper. Tolerance = 2 mm             (9)

7.2   Beams:

      7.2.1
               Moment about LR:
                              (RR  9) = (2  4) + (2  7) + (2  8) ✓
                               RR  9 = (8) + (14) + (16) ✓
                                        38
                                  RR =
                                         9
                                  RR = 4,2 kN ✓
               Moments about RR:
                              (LR  9) = (4  7) + (2  2) + (2 ) ✓
                                LR  9 = (28) + (4) + (2) ✓
                                        34
                                  RR =
                                         9
                                  LR = 3,8 kN ✓                                     (6)

      7.2.2   BM by B    = (3,8 × 2) – (4 × 0)
                         = 7,6 kN.m ✓

              BM by C    = (3,8 × 7) – (4 x 5) – (2 x 0)
                         = 6,6 kN.m ✓✓

              BM by D    = (3,8 × 8) – (4 × 6) – (2 × 1)
                         = 4,4 kN.m ✓✓                                              (5)

                                                     13

### Page 14

MECHANICAL TECHNOLOGY: WELDING
                   MARKING GUIDELINES            AND METALWORK             GR12 0625

      7.2.3   Bending moment diagram:

                                 BENDING MOMENT DIAGRAM

                                                      Scale

                                                                                  (4)

7.3   Calculate the stress in the round bar:

      7.3.1              Load
              Stress =
                         Area
                                             ²
                                   Area =
                                             4
                                   Area = 0,00000078539 m² ✓

              Stress = 150 000 ✓
                       0,00000078539
              Stress = 190,098593 Gpa ✓                                           (3)

      7.3.2   Calculate the strain in the round bar (answer in full decimals):

                         Change in length
              Strain =
                          Original length
                                        0,6    ✓✓
                                      =
                                        6 000
                                      = 0,001 ✓                                    (3)
                                                                                 [40]

                                                 14

### Page 15

MECHANICAL TECHNOLOGY: WELDING
                   MARKING GUIDELINES          AND METALWORK             GR12 0625

QUESTION 8: JOINING METHODS INSPECTION OF WELD

8.1   Welding defects:

      8.1.1   Slag inclusion:

              •   Using well-maintained consumables. ✓
              •   Clean the joint properly. ✓
              •   Slag must be removed before welding the next bead. ✓
              •   Too slow welding movements. ✓
              •   Electrodes are too big. ✓
              •   Wrong or too big weaving action. ✓
                                                                           (Any 1 x 1)    (1)

      8.1.2   Centre-line cracks:

              •   Aiming for a width-to-depth ratio of 1 : 1. ✓
              •   Decreasing the current to reduce excess penetration. ✓
              •   Decreasing welding voltage/current. ✓
              •   Slowing travel speed. ✓
              •   Reduce high carbon content in weld. ✓
              •   Welding while joint is under stress due to joint design, use
                  clamping devices. ✓
                                                                            (Any 1 x 1)   (1)

8.2   Free bend test:

      8.2.1   Purpose of test on a weld.

              Measures flexibility of the welding joint and heat affected zone of the
              welding joint. Measures the percentage extension of the weld metal. ✓       (1)

      8.2.2   How the test is done:

              •   After welding, the material is trimmed in the opposite direction of
                  welding. ✓
              •   Scratch two lines of 1,6 mm on the edges of the welding bead and
                  measure the distance. ✓
              •   Bend the material first 30°. ✓
              •   Measure the lines again and update the percentage extension. ✓          (4)

8.3   Types of flames:

      •   Carburising ✓
      •   Oxidizing ✓
      •   Neutral ✓                                                                       (3)

                                               15

### Page 16

MECHANICAL TECHNOLOGY: WELDING
                   MARKING GUIDELINES         AND METALWORK             GR12 0625

8.4   Nick-break test:

      Make a hacksaw cut at both edges, through the centre of the weld. ✓
      Place the specimen on two steel supports. ✓
      Use a sledgehammer to break the specimen in the area of the cuts. ✓
      Inspect the exposed weld metal in the break ✓ for incomplete fusion, slag
      inclusion, etc. ✓                                                                    (4)

8.5   Welding defects during arc welding:

      8.5.1   Porosity:

              •    Cleaning the welding surface. ✓
              •    Use dry electrodes. ✓
              •    Avoid rust on the electrode. ✓
              •    Ensure that the supply of shielding gas is not interrupted. ✓
              •    Avoid welding in windy conditions. ✓
              •    Use the correct arc length. ✓
                                                                            (Any 2 x 1)   (2)

      8.5.2   Incomplete penetration:

              Set to the correct current setting.
              • Apply the correct electrode angle.
              • Increase travel speed.
              • Use the correct root gap.
              • Ensure the correct joint preparation.
                                                                           (Any 2 x 1)     (2)
                                                                                          [18]

                                              16

### Page 17

MECHANICAL TECHNOLOGY: WELDING
                    MARKING GUIDELINES          AND METALWORK             GR12 0625

QUESTION 9: STRESSES AND DISTORTION (STRESSES AND DISTORTION)
           (SPECIFIC)

9.1   Distortion:

      Tension in the welding bead due to heat and cooling of the welding bead ✓ and
      heat affected zone which causes deformation. ✓                                     (2)

9.2   9.2.1   Distortion in A:

              Specific steel application electrodes have other thermal properties than
              the parent metal ✓ which can cause deformation if pre-heating is not
              done. ✓✓                                                                   (3)

      9.2.2   Residual stress at B:

              •     Expulsion during heating could be opposed. ✓
              •     Contraction during cooling could be opposed. ✓
              •     Applied tension on the load could cause movement. ✓
              •     Applied tension could not cause movement. ✓
                                                                           (Any 3 x 1)   (3)

      9.2.3   Methods to reduce distortion:

              •     Do not overweld ✓
              •     Uninterrupted welding ✓
              •     Place welds near the neutral axis ✓
              •     Use as few runs as possible ✓
              •     Use Backstep-Welding ✓
              •     Provide shrinkage force ✓
              •     Plan welding sequence ✓
              •     Use a strongback ✓
                                                                           (Any 4 x 1)   (4)

9.3   Cold working on steel:

      •   The previous amount of cold work. ✓
      •   The temperature and time of the annealing process. ✓
      •   Composition of the metal. ✓
      •   The melting point. ✓                                                           (4)

9.4   When austenite is allowed to cool slowly:

      •   The grain formation will become uniform. ✓
      •   Carbon content will change. ✓
      •   Internal structure will change. ✓                                              (3)

                                               17

### Page 18

MECHANICAL TECHNOLOGY: WELDING
                  MARKING GUIDELINES    AND METALWORK             GR12 0625

9.5   Factors:

      •   Size ✓
      •   Thickness ✓
      •   Thermal conduction ✓                                            (3)

9.6   FOUR quenching media used to cool down steel:

      •   Fused salts ✓
      •   Water ✓
      •   Air ✓
      •   Sand ✓
      •   Brine ✓
      •   Oil ✓
                                                           (Any 5 x 1)     (5)
                                                                         [27]

                                                               TOTAL:    200

                                        18

## Related documents

- [MECH TECH GR12 MEMO SEPT 2020 Auto English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept-2020-auto-english/9066fed3-db75-4436-9ea3-0a432f99cc0b) — Mechanical Technology · Memo · 2020 · Eng
- [MECHANICAL TECH (Auto) MEMO SEPT 2018 English](https://www.hlayiso.com/library/mechanical-tech-auto-memo-sept-2018-english/b985e4dd-9a08-4ec2-a07b-64edd6f727ea) — Mechanical Technology · Memo · 2018 · Eng
- [MECHANICAL TECH (Welding) GR12 MEMO SEPT 2018 English](https://www.hlayiso.com/library/mechanical-tech-welding-gr12-memo-sept-2018-english/1b0b4dd6-b53e-485d-9068-6f378eb8c9f3) — Mechanical Technology · Memo · 2018 · Eng
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — Mechanical Technology · QP · 2024 · Eng
- [MECH TECH GR12 QP SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept2023-welding-english/49e9215c-dc78-48c3-a526-4baaf59158d8) — Mechanical Technology · QP · 2023 · Eng
- [MECH TECH GR12 QP SEPT 2020 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept-2020-welding-english/fb1b7d42-462f-47a9-b370-31ff67b36f87) — Mechanical Technology · QP · 2020 · Eng

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2023 (Welding & Metalwork) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-welding-metalwork-afr/7d638feb-7218-4b3c-9f4c-ce95803d6e4f) — QP · 2023 · Afr
- [Mechanical Technology May-June 2023 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-eng/1523a16f-2012-4f13-a922-86cbb5900666) — QP · 2023 · Eng
- [Mechanical Technology May-June 2023 (Automotive) Afr](https://www.hlayiso.com/library/mechanical-technology-may-june-2023-automotive-afr/8d31d25d-e192-4aa9-b448-efab233391a1) — QP · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
