# Mechanical Technology Grade 12 Eastern Cape Mock 2017 Memo

> Grade 12 Mechanical Technology memorandum from the Eastern Cape Mock Exam 2017 (English), 9 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mechtech-eng-memo/84d5c26e-f528-44a8-8128-f874ce48eeff
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2017
- Exam period: Eastern Cape Mock Exam
- Curriculum: CAPS
- Pages: 9

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 Eastern Cape Mock 2017 Memo](https://www.hlayiso.com/library/mechtech-eng-memo/84d5c26e-f528-44a8-8128-f874ce48eeff)

## About this document

Mechanical Technology · Grade 12 · Eastern Cape Mock Exam · 2017. Memorandum, 9 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                         NATIONAL
                    SENIOR CERTIFICATE

                           GRADE 12

                     SEPTEMBER 2017

               MECHANICAL TECHNOLOGY
                 MARKING GUIDELINE

MARKS:   200

                 This marking guideline consists of 9 pages.

### Page 2

Downloaded from hlayiso.com
2                                 MECHANICAL TECHNOLOGY                    (EC/SEPTEMBER 2017)

 QUESTION 1: MULTIPLE-CHOICE QUESTIONS

 1.1    A                                                                                    (1)
 1.2    C                                                                                    (1)
 1.3    B                                                                                    (1)
 1.4    C                                                                                    (1)
 1.5    D                                                                                    (1)
 1.6    C                                                                                    (1)
 1.7    A                                                                                    (1)
 1.8    C                                                                                    (1)
 1.9    B                                                                                    (1)
 1.10   C                                                                                    (1)
 1.11   A                                                                                    (1)
 1.12   B                                                                                    (1)
 1.13   D                                                                                    (1)
 1.14   D                                                                                    (1)
 1.15   A                                                                                    (1)
 1.16   B                                                                                    (1)
 1.17   C                                                                                    (1)
 1.18   A                                                                                    (1)
 1.19   D                                                                                    (1)
 1.20   B                                                                                    (1)
                                                                                             [20]
 QUESTION 2: SAFETY

 2.1    Oil and grease are flammable and may cause a fire.                                     (2)

 2.2       Store full cylinders and empty ones separately. 
           Keep cylinders in a cool place. 
           Protect them from sunlight and other sources of heat. 
           Always store and use acetylene cylinders in an upright position.
           Store oxygen and acetylene cylinders separately
           Never stack cylinders on top of one another.
           Do not bang or work on cylinders.
           Never allow cylinders to fall.
           Do not allow oil or grease to come into contact with oxygen fittings.
           Keep the caps on an oxygen cylinder for protection.                   (Any 3)        (3)

 2.3     An operator should be instructed to use a machine safely. 
         A workplace must be effectively partitioned off. 
         An operator must use protective equipment.
         Effective ventilation must be provided and maintained.
         Masks or hoods maintaining a supply of safe air for breathing must be
          provided and used by the operators.
         The insulation of electrical leads must be satisfactory.
         The holder which contains the wire must be completely insulated. (Any 2)               (2)

 2.4    2.4.1     Make sure the centre or drill chuck is well secured before switching
                   on the machine. 
                  Make sure the tail stock is well secured and locked when cutting
                   between centres.                                            (Any 1)          (1)

Copyright reserved                                                             Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                 MECHANICAL TECHNOLOGY                                   3

        2.4.2     Make sure the guard is well secured before switching on the
                   machine. 
                  Machine guard must be in a good condition.                 (Any 1)           (1)
        2.4.3     Keep hands away from rotating chuck. 
                  Don't leave the chuck key in the chuck. 
                  Make sure the chuck is well secured before switching on the
                   machine. 
                  Turn the chuck by hand to be certain that there is no danger of the
                   work piece striking any part of the lathe.                  (Any 1)       (1)
                                                                                             [10]
 QUESTION 3: TOOLS AND EQUIPMENT
 3.1        Brinell hardness tester 
            Rockwell hardness tester 
            Vickers tester                                                     (Any 2)         (2)
 3.2        Check for worn cylinders 
            Check for worn piston rings 
            Check for worn pistons 
            Check for inlet valve leakage 
            Check for exhaust valve leakage                                    (Any 3)         (3)
 3.3    A tensile tester measures the resistance of a material to a static or slowly
        applied tensile axial force.                                                           (2)
 3.4        Rich mixture setting 
            Incorrect idle speed 
            Faulty choke creating a rich mixture (jammed in the closed position) 
                                                                                (Any 2)          (2)
 3.5        Check if the measuring lead are inserted in the correct socket for the
             measurement. 
            Turn the function switch to the desired function. 
            If you do not know what size of reading to expect, then switch to the
             highest range first. 
            Connect the meter measuring lead probes to the correct points in the
             circuit to be tested.                                               (Any 3)     (3)
                                                                                            [12]
 QUESTION 4: MATERIALS

 4.1        Low carbon steel  0,10 – 0,25% 
            Medium carbon steel  0,25 – 0,55% 
            High carbon steel  0,55 – 1,00%                                                  (9)

 4.2    The internal structural changes take place and it takes up an entirely new form
        at a temperature of about 800 °C.                                                      (2)

 4.3    730° – 780 °C                                                                       (2)
                                                                                             [13]

Copyright reserved                                                            Please turn over

### Page 4

Downloaded from hlayiso.com
4                                  MECHANICAL TECHNOLOGY                   (EC/SEPTEMBER 2017)

 QUESTION 5: TERMINOLOGY

 5.1        Arbor cutters                                                           (1)
             e.g. plain, side, staggered-tooth, metal slitting saw and form cutters 
                                                                     (Any 2 examples)(2)
            Shank cutters                                                           (1)
             e.g. end mills, T-slot, Woodruff key seat and fly cutter 
                                                                      (Any 2 examples)(2)        (6)

 5.2     High abrasive resistance 
         Red hardness i.e. the hardness of the cutting edge must not be affected by
          heat generated. 
         Edge toughness                                                    (Any 2)             (2)

 5.3     Turn the part to be threaded to the major diameter of the thread 
         Set compound slide 300 to the right and set tool up accurately in the tool
          post. 
         Check index plate of the quick-change gearbox and move the levers for
          the necessary pitch of the thread. 
         Start lathe and set cutting tool to touch work piece. Set dial to zero on
          cross feed and compound slide. 
         Move the cutting tool a short distance off to clear the end of the work piece
          and feed compound slide 0,05 mm inward. 
         With lathe turning, engage half-nuts in the correct line on the chasing dial,
          putting the first cut in progress. 
         Withdraw the cutting tool quickly and disengage the half-nut lever return
          the carriage to the starting point of thread and check with thread gauge to
          see if thread pitch is correct. 
         Repeat with successive cut until thread is complete.               (Max. 7 x 1)        (7)

 5.4    5.4.1       Form cutters 
                    Profile cutters                                            (Any 1)         (1)

        5.4.2                        40      7
                 Number of turns = 33  = 133 
                 1 Full turn and 7 holes in a 33 hole-circle                                    (3)

 5.5    A    Side and face milling cutters 
        B    Spindle nose 
        C    Vice fixed jaw 
        D    Parallels 
        E    Work piece 
        F    Shoulder width 
        G    Collars and spacers 
        H    Vice movable jaw                                                                   (8)

 5.6    A    Major/Crest diameter 
        B    Pitch diameter 
        C    Minor or Root diameter                                                          (3)
                                                                                             [30]

Copyright reserved                                                             Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                  MECHANICAL TECHNOLOGY                              5

 QUESTION 6: JOINING METHODS

 6.1    A    Regulator 
        B    Flow meter 
        C    Continuous wire reel 
        D    Wire feed roller unit 
        E    Gun conduit 
        F    Welding gun 
        G    Weld pool 
        H    Work piece 
        I    Earth clamp                                                                    (9)

 6.2    A    Parent metal 
        B    Molten pool 
        C    Continuous electrode wire 
        D    Nozzle 
        E    Gas shroud                                                                     (5)

 6.3        X-ray testing 
            Liquid dye penetrant 
            Ultrasonic testing                                                             (3)

 6.4        Make a hacksaw cut at both edges through the centre of the weld. 
            Use a sledge hammer to break the specimen by striking it in the zone
             where you made the saw cuts. 
            The weld metal exposed in the break should be completely free from slag
             inclusions and contain no gas pockets greater than 1,6 mm.                     (4)

 6.5    To protect the weld area from oxygen and water vapour.                             (2)

 6.6        Solid metals entrapped in the weld metal or between the weld metal and
             the base metal. 
            Weld temperature is too low. 
            Included angle is too small. 
            Repeating a weld without removing the previous slag. 
            High viscosity of the molten metal.                           (Max. 2)      (2)
                                                                                         [25]
 QUESTION 7: FORCES

 7.1    7.1.1    A force is a push or a pull movement.                                      (1)

        7.1.2    It is a system in balance.                                                 (1)

        7.1.3    It is a conversion of multiple forces into one.                            (1)

Copyright reserved                                                        Please turn over

### Page 6

Downloaded from hlayiso.com
6                                        MECHANICAL TECHNOLOGY       (EC/SEPTEMBER 2017)

 7.2    7.2.1                F
                 Stress =
                             A
                                 F
                      A = Stress 
                     𝜋𝐷 2        F
                            = Stress 
                      4
                                 F×4
                      D2 = π × 𝑠tress 
                                 4 × 40 × 103
                      D = √ 𝜋 × 20 × 106 
                      D = √2,546 
                      D = 0,05045 m
                      D = 50,45 mm  Diameter of bar                                       (6)

        7.2.2                Stress
                      E = Strain
                             20 × 106
                 Strain = 90 × 109 
                        = 2,222 × 10−4                                                    (2)

        7.2.3                Change in lenght
                 Strain = Original lenght 
                 Change in length = Strain × Original length 
                                  = 0,177 mm                                              (3)

 7.3         X-component = 280 N + 300 Cos 30° - 400 Cos 30° 
                         = 193,39 N 
             Y-component = 300 Sin 30° + 400 Sin 30° - 170 
                          = 150 + 200 + 170
                          = 180 N 
                      𝑅 = 𝑋2 + 𝑌2
                       2

                          = 193,392 + 1802 
                          = √69799,69
                     R = 264,19 N - resultant 

        Calculation of the direction:
                                180
                     Tan Ɵ = 193,39 
                                     = 0,931
                                     = 42,95°                                         (10)

 7.4    Reaction at A:
        B × 6,2 = (496 × 3,1) + (350 × 7,9) 
                = 1537,6 + 2765 
              B = 693,96 N 

        Reaction at B:
        (A × 6,2) + (350 × 1,7) = (800 × 6,2) + (496 × 3,1) 
                      (A × 6,2) = 4960 + 1537,6 – 595 
                              A = 952,03 N 

                                 A + B = 693,96 + 952,03 = 1645,99
        Downwards = 800 + 496 + 350 = 1646
        The beam is in equilibrium                                                      (6)
                                                                                       [30]

Copyright reserved                                                       Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                        MECHANICAL TECHNOLOGY                              7

 QUESTION 8: MAINTENANCE

 8.1     It prevents the shavings or metal chips from sticking and fusing to the
          cutting tool. 
         It will carry the heat generated by the turning process. 
         It flushes away shavings/metal chips. 
         It improves the quality of the finish of the turned surface.        (Max. 3)            (3)

 8.2     Formation of gum, acids and lacquer may be left by the oil to coat the
          surfaces. 
         Oil loses its viscosity after a while due to excessive heat transfer which
          results in friction of lubricating efficiency. 
         Metal particles deposit in the oil due to metal and metal contact.  (Max. 3)            (3)

 8.3    8.3.1    It is the lowest temperature at which the oil gives off vapours which
                 can ignite                                                                      (2)

        8.3.2    It is the lowest point at which a liquid remains ‘pourable’ (meaning it
                 still behaves like a fluid)                                                     (2)

 8.4       It must be water resistant, it must not mix 
           Rust/Corrosion resistant 
           Good for load pressure 
           High melting point 
           Low freezing point                                                    (Any 3)         (3)

 8.5     To provide friction between the clutch and pressure plate 
         To connect the flywheel to the gearbox shaft                                         (2)
                                                                                               [15]

 QUESTION 9: SYSTEMS AND CONTROL

 9.1    9.1.1    First calculate the volume of cylinder B.
                         𝑉𝐵 = 𝐴𝑟𝑒𝑎𝐵 × 𝑆𝑡𝑟𝑜𝑘𝑒 𝑙𝑒𝑛𝑔𝑡ℎ𝐵 
                                       2
                                  𝜋 × 𝐷𝐵
                            =              × 𝐿𝐵
                                     4
                                  𝜋 × (0,18)2
                            =         × 0,012 
                                 4
                            = 0,305 × 10−3 𝑚3 
                     But 𝑉𝐴 = 𝑉𝐵
                    𝐴𝐴 𝑋 𝐿𝐴 = 𝑉𝐵
                 𝐴𝐴 × 0,06 = 0,305 × 10−3 
                                  𝑜,305 × 10−3
                         𝐴𝐴 =                      
                                        0,06
                            = 5,08 × 10−3 𝑚2 
                                    2
                                  𝜋𝐷𝐴
                         𝐴𝐴 =      4
                                   4 × 5,08 × 10−3
                          𝐷𝐴2 =                        
                                               𝜋
                          𝐷𝐴 = √6,47 × 10−3 
                          𝐷𝐴 = 0,80 m
                             = 800 mm                                                             (9)

Copyright reserved                                                              Please turn over

### Page 8

Downloaded from hlayiso.com
8                                       MECHANICAL TECHNOLOGY    (EC/SEPTEMBER 2017)

        9.1.2                           FA
                 Pressure at A =
                                        AA
                                              550
                                𝑃𝐴 = 5,08 × 10−3 
                                     = 108,268 × 103 Pa
                                     = 108,27 kPa                                     (2)

        9.1.3    Note: Pressure at A is equal to pressure at B
                 𝑃𝐴 = 𝑃𝐵
                       𝐹
                 𝑃𝐵 = 𝐴𝐵 
                         𝐵
                 𝐹𝐵 = 108,268 × 103 × 𝐴𝐵 
                     = 108,268 × 103 × 25,45 × 10−3 
                     = 2755,42 N
                  𝐹𝐵 = 2,76 kN                                                        (4)

 9.2    9.2.1    Compressive stress                                                   (1)

        9.2.2          𝝅( 𝑫𝟐 −𝒅𝟐 )
                 A =       𝟒
                        𝝅(𝟎,𝟎𝟒𝟐 )− (𝟎,𝟎𝟑𝟐 )
                    =                
                             𝟒
                                −𝟑 𝟐
                    = 0,55 × 𝟏𝟎 𝒎 
                          𝑭𝒐𝒓𝒄𝒆
                 Stress = 𝑨𝒓𝒆𝒂
                              𝟐𝟑× 𝟏𝟎𝟑
                         =                
                             𝟎,𝟓𝟓 × 𝟏𝟎𝟑
                         = 41818181,8 Pa 
                         = 41,82 MPa                                                  (5)

 9.3    9.3.1    Rotation of motor
                      80 × 40 × 90
                 𝑁𝐸 = 30 × 20 
                       288000
                      = 600
                      = 480 r/min                                                     (2)

        9.3.2       No slip occurs 
                    It is much stronger 
                    More accurate 
                    Last longer                                      (Any 2)      (2)
                                                                                   [25]

Copyright reserved                                                   Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2017)                MECHANICAL TECHNOLOGY                                  9

 QUESTION 10: TURBINES

 10.1  The supercharger fills the cylinder with an increased pressure that is higher
        than atmospheric pressure. 
       The compression pressure in the cylinder is increased. 
       The volumetric efficiency of the engine is increased.               (Any 2)           (2)

 10.2      Used in racing cars 
           Four-stroke compression ignition engines in heavy vehicles 
           Earth moving equipment 
           Aircraft engine to overcome loss of power owing to height above sea
            level                                                             (Any 2)         (2)

 10.3  A turbine is driven by the exhaust gas from a pump, most often an internal
        combustion engine, to spin an impeller whose function is to force air into
        the pump’s intake or air supply. 
       The shaped fins on the impeller move the air around to the outer edge of
        the impeller into the housing. 
       In doing so, the moving fins leave a low pressure behind it. 
       Air, under atmospheric pressure, rushes in to fill the low pressure at the
        centre of the impeller. 
       By spinning at a relatively high speed, the compressor turbine draws in a
        large volume of air and forces it into the engine. 
       As the turbocharger’s output – flow volume exceeds the engine’s
        volumetric flow, air pressure in the intake system begins to build. 
       The speed at which the assembly spins is proportional to the pressure of
        the compressed air and total mass of air flow being moved. 
       Since a turbo will spin faster than is needed, the speed must be controlled
        and thus it is also the property used to set the desired compression
        pressure.                                                                             (8)

 10.4  Kinetic energy is the steam which is converted to mechanical energy to
        cause rotation. (mechanical energy) 
       Steam at very high temperature and pressure is directed to the turbine. 
       Nozzles are used to direct the pressure onto the blades. 
       The blades are attached to the turbine and shaft causing it rotate. 
       This is mechanical energy created by the impulse and the reaction effort of
        the steam jet.                                                                        (5)

 10.5  Water turbines 
       Gas turbines 
       Wind turbines                                                                      (3)
                                                                                           [20]
                                                                              TOTAL:       200

Copyright reserved                                                          Please turn over

## Related documents

- [Mechanical Technology Nov 2017 Memo Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2017-memo-eng/b3c12d71-3bc7-4aad-8136-9fa2ee93a99e) — Mechanical Technology · Memo · 2017 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Mechanical Technology · Memo · 2023 · Afr
- [MECH TECH GR12 MEMO SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-english/b7ba3c6c-9153-4d83-8be0-0df7c4a69ab1) — Mechanical Technology · Memo · 2023 · Eng
- [MECHANICAL TECH (Auto) GR12 MEMO SEPT2023 English](https://www.hlayiso.com/library/mechanical-tech-auto-gr12-memo-sept2023-english/dfc975c1-e179-4741-8d4f-e3b20c744c7e) — Mechanical Technology · Memo · 2023 · Eng
- [MEC TECH GR12 MEMO SEPT2023 Fitting English](https://www.hlayiso.com/library/mec-tech-gr12-memo-sept2023-fitting-english/48945e78-f50a-4241-bab7-b94b61c60f49) — Mechanical Technology · Memo · 2023 · Eng
- [MECH TECH GR 12 MEMO SEPT 2020 Auto Afrikaans](https://www.hlayiso.com/library/mech-tech-gr-12-memo-sept-2020-auto-afrikaans/4a3289ca-f4a9-44a3-896e-c216c19a5874) — Mechanical Technology · Memo · 2020 · Afr

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Welding and Metalwork) MG Afr](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-memorandum-afrikaans/552ebeca-d294-4c37-b3fb-cded79fa438f) — Memo · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [MECH TECH GR12 QP SEPT2023 Welding English](https://www.hlayiso.com/library/mech-tech-gr12-qp-sept2023-welding-english/49e9215c-dc78-48c3-a526-4baaf59158d8) — QP · 2023 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
