# Mechanical Technology Grade 12 NSC Supplementary 2016 Memo

> Grade 12 Mechanical Technology memorandum from the NSC Supplementary Exam 2016 (English), 18 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/mt-feb-march-2016-memo-eng/c09d2c1d-09b6-44aa-bb15-2453e8b68b76
- Updated: 2026-09-27
- Subject: Mechanical Technology
- Grade: Grade 12
- Document type: Memorandum
- Year: 2016
- Exam period: NSC Supplementary Exam
- Curriculum: CAPS
- Pages: 18

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Mechanical Technology](https://www.hlayiso.com/library/grade-12/mechanical-technology) › [Mechanical Technology Grade 12 NSC Supplementary 2016 Memo](https://www.hlayiso.com/library/mt-feb-march-2016-memo-eng/c09d2c1d-09b6-44aa-bb15-2453e8b68b76)

## About this document

Mechanical Technology · Grade 12 · NSC Supplementary Exam · 2016. Memorandum, 18 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                                 NATIONAL
                            SENIOR CERTIFICATE

                                   GRADE 12

                          MECHANICAL TECHNOLOGY

                            FEBRUARY/MARCH 2016

                                 MEMORANDUM

MARKS: 200

                       This memorandum consists of 18 pages.

Copyright reserved                                             Please turn over

### Page 2

Downloaded from hlayiso.com
Mechanical Technology                 2          DBE/Feb.–Mar. 2016
                              NSC – Memorandum

QUESTION 1: MULTIPLE-CHOICE QUESTIONS

1.1       C                                                          (1)

1.2       B                                                          (1)

1.3       D                                                          (1)

1.4       D                                                          (1)

1.5       A                                                          (1)

1.6       C                                                          (1)

1.7       D                                                          (1)

1.8       D                                                          (1)

1.9       B                                                          (1)

1.10      D                                                          (1)

1.11      D                                                          (1)

1.12      C                                                          (1)

1.13      B                                                          (1)

1.14      B                                                          (1)

1.15      A                                                          (1)

1.16      C                                                          (1)

1.17      A                                                          (1)

1.18      C                                                          (1)

1.19      D                                                          (1)

1.20      B                                                          (1)
                                                                      [20]

Copyright reserved                                      Please turn over

### Page 3

Downloaded from hlayiso.com
Mechanical Technology                        3                         DBE/Feb.–Mar. 2016
                                     NSC – Memorandum

QUESTION 2: SAFETY

2.1       Safety – Centre lathe
          • Look out for revolving work pieces 
          • Do not remove shavings by hand 
          • Be careful not to run the cutting tool into the chuck 
          • Do not make any adjustments on the work piece while the machine is
              running 
          • Do not leave tools on the machine while in operation 
                                                                    (Any 2 x 1)             (2)

2.2       Safety – Tensile Tester
          • Use safety goggles 
          • Do not apply excessive pressure 
          • Test piece to be well secured for testing 
          • Check hydraulic fluid level 
                                                                           (Any 2 x 1)      (2)

2.3       Safety – Spring Tester
          • Spring tester should be in a good condition 
          • Spring tester must be fitted correctly and firmly 
          • Ensure that the spring cannot slip out of position before applying the load
              
          • An uniform load must be applied 
          • Release the load carefully and uniformly 
                                                                            (Any 2 x 1)     (2)

2.4       Safety – Cylinder Leakage
          • Clean the area around the spark plug, before removing the spark plug 
                   To prevent dirt from falling into the cylinder. 
          • Be careful when removing radiator cap 
                   The water may be hot and under pressure. 
          • Do not exceed the specified pressure to test the cylinder 
                   To prevent damage to the seals and tester. 
          • The tester must fit properly and be well tightened in the spark hole or
              injector hole 
                   To prevent damage to the tester and spark hole or injector hole. 
                                                                              Any 2 x 2     (4)
                                                                                            [10]

Copyright reserved                                                            Please turn over

### Page 4

Downloaded from hlayiso.com
Mechanical Technology                          4                       DBE/Feb.–Mar. 2016
                                       NSC – Memorandum

QUESTION 3: TOOLS AND EQUIPMENT

3.1       Compression testing

          3.1.1         •   Wet compression test 
                        •   Dry compression test                                           (2)

          3.1.2       •     Worn cylinders 
                      •     Worn piston rings 
                      •     Worn piston 
                      •     Leaking inlet valve 
                      •     Leaking exhaust valve 
                      •     Leaking cylinder head gasket 
                                                                           (Any 2 x 1)      (2)

3.2       Oil pump
          •   Oil pressure meter or oil pressure tester                                    (1)

3.3       Cooling system test
          • Remove the radiator cap and fit the tester 
          • Pump air at the prescribed pressure into the system 
          • Note the reading  and if the reading drops, it indicates a leaking
             system 
          • To test for a leaking cylinder-head gasket,  the engine is started. 
          •  If the reading increases while the engine idles, it indicates on a leaking
             cylinder-head gasket                                                          (7)
                                                                                            [12]

Copyright reserved                                                            Please turn over

### Page 5

Downloaded from hlayiso.com
Mechanical Technology                          5                        DBE/Feb.–Mar. 2016
                                       NSC – Memorandum

QUESTION 4: MATERIALS

4.1       Iron-carbon properties

          4.1.1       Pearlite:
                      • Good ductility 
                      • Hard 
                      • Strong and tough 
                      • Resistant to deformation 
                                                                            (Any 2 x 1)      (2)

          4.1.2       Cementite:
                      • Intensely hard 
                      • Brittle.                                                            (2)

4.2       Critical points

          4.2.1       AC 1 – lower critical point
                      • The lowest temperature to which steel must be heated to be
                          hardened. 
                      • The lowest temperature where the structure starts to
                          change. 
                                                                       (Any 1 x 2)           (2)

          4.2.2       AC 3 – high critical point
                      • The highest temperature to which the steel can be heated to
                          obtain maximum hardness. 
                      • The temperature where the steel completely loses its magnetic
                          properties. 
                      • The temperature where the steel's structure is at its finest. 
                                                                             (Any 1 x 2)     (2)

4.3       Carbon content determines the hardness of steel.                                  (1)

4.4       Cementite structure in steel determines the hardness.                             (1)

4.5       Ferrite structure in steel determines the ductility.                              (1)

4.6       Austenite is a solid solution of iron and carbon also called iron carbide. 
          The structure is at its finest.                                                   (2)
                                                                                             [13]

Copyright reserved                                                             Please turn over

### Page 6

Downloaded from hlayiso.com
Mechanical Technology                            6                              DBE/Feb.–Mar. 2016
                                         NSC – Memorandum

QUESTION 5: TERMINOLOGY

5.1       Gear calculation

          5.1.1         Circular pitch = m × π
                                         circular pitch
                             module =                                       
                                               π
                                         12,567                             
                                       =
                                            π
                                       = 4 mm                                                           (3)

          5.1.2         Outside diameter = PCD + 2m
                                                                           
                                    PCD = OD − 2m                          
                                            = 112 − 2(4 )
                                            = 104 mm                                                    (3)

          5.1.3         Cutting Depth = 2,157m                 Cutting Depth = 2,25m            
                        Cutting Depth = 2,157 × 4         OR    Cutting Depth = 2,25 × 4
                                      = 8,628mm                             = 9 mm              
                                      = 8,63 mm                                                          (2)

          5.1.4         Addendum = m
                                 = 4 mm                                                                 (1)

          5.1.5         Dedendum = 1,157m                      Dedendum = 1,25m
                                                                                             
                                 = 1,157 × 4           OR      Dedundum = 1,25 × 4
                                 = 4,628mm                             = 5 mm                
                                 = 4,63 mm                                                               (2)

          5.1.6         Clearance = 0,157m                     Clearance = 0,25m            
                                  = 0,157 × 4         OR                 = 0,25 × 4
                                  = 0,628 mm                             = 1 mm             
                                  = 0,63 mm                                                              (2)

          5.1.7                   PCD
                        module =                                            
                                 Teeth
                                 PCD
                         Teeth =
                                   m                                        
                                 104
                               =
                                  4
                               = 26 teeth                                                               (3)

Copyright reserved                                                                         Please turn over

### Page 7

Downloaded from hlayiso.com
Mechanical Technology                          7                              DBE/Feb.–Mar. 2016
                                       NSC – Memorandum

5.2       Indexing

                       40
          Indexing =
                        n
                       40                                                            
                     =
                       26
                       40 2
                     =    ÷
                       26 2                                                          
                     20
                     =
                     13
                       7 3
                   =1 ×
                      13 3
                       21                                                            
                   =1
                      39
          Indexing = 1 full turn of the crank and 21 holes on the 39 hole circle     
                                                                                                 (4)
5.3       Screw thread cutting
          • Set up the work piece in the lathe and turn the part to be threaded to
              the major diameter of the thread. 
          • Set the compound slide to the correct angle (30°) to the right and set
              the tool up accurately in the post. 
          • Consult the index plate of the quick-change gearbox for 2 mm pitch
              and move the levers accordingly. 
          • Start the lathe and set the cutting tool so that it just touches the work
              piece. Set graduated dials to zero (cross feed and compound slide) 
          • Move cutting tool a short distance off end of work piece and feed
              compound slide say 0,06 mm inwards. 
          • With lathe turning, engage half nuts at the correct line on the chasing
              dial, putting the first cut in progress. 
          • Withdraw the cutting tool quickly and disengage the half-nut lever.
              Return the carriage to the starting point of the thread.  OR Stop the
              machine, leave half nut engaged, back off slide past zero and return
              carriage to start position in reverse 
          • Check with thread gauge to see if thread pitch is correct. 
          • Repeat with successive cuts until thread is complete. (Remember to
              bring cross-feed collar back to zero for each cut) 
          • Each successive cut is set by means of the compound slide. Check
              thread with ring gauge for correct fit.                                           (10)
                                                                                                 [30]

Copyright reserved                                                                   Please turn over

### Page 8

Downloaded from hlayiso.com
Mechanical Technology                         8                        DBE/Feb.–Mar. 2016
                                      NSC – Memorandum

QUESTION 6: JOINING METHODS

6.1       MIG/MAGS welding equipment

          6.1.1       MIG/MAGS welding equipment                                           (1)

          6.1.2       Labels
                      A = Shielding gas cylinder 
                      B = Regulator 
                      C = Gas flow meter 
                      D = Continuous wire reel 
                      E = Welding gun 
                      F = Arc 
                      G = Earth clamp                                                      (7)

          6.1.3       Purpose
                      Prevents oxygen  to come in contact with the molten metal.          (2)

6.2       Weld defects

          6.2.1       Defect: Slag inclusion
                      Causes:
                      • Included angle is too narrow. 
                      • Rapid chilling. 
                      • Weld temperature is too low. 
                      • High viscosity of molten metal. 
                      • Slag from previous run weld not removed. 
                                                                           (Any 2 x 1)      (2)

          6.2.2       Defect: Undercutting
                      Causes:
                      • Faulty electrode manipulation. 
                      • Current too high. 
                      • Arc length too long. 
                      • Speed of weld too fast. 
                                                                           (Any 2 x 1)      (2)

Copyright reserved                                                            Please turn over

### Page 9

Downloaded from hlayiso.com
Mechanical Technology                         9                         DBE/Feb.–Mar. 2016
                                      NSC – Memorandum

6.3       Welding defects

          6.3.1       Defect: Lack of fusion
                      Preventions:
                      • Adjust the electrode angle and prepare the V groove
                          properly.
                      • Weave must be sufficient to melt sides of the joint. 
                      • Proper current will allow fusion. 
                      • Adjust welding speed to ensure fusion. 
                                                                             (Any 2 x 1)     (2)

          6.3.2       Defect: Weld craters
                      Preventions:
                      • Use lower current. 
                      • Use proper welding technique. 
                      • Use correct electrode 
                                                                            (Any 2 x 1)      (2)

6.4       Dye penetration test
          • Clean the weld that needs to be tested. 
          • The dye is sprayed onto the clean surface. 
          • Allow the dye to penetrate the weld joint. 
          • Excess dye is cleaned away with a cleaning agent. 
          • Allow surface to dry thoroughly. 
          • Spray a developer onto the surface to bring out the dye trapped in the
             crack. 
          • The dye will show all the surface defects                                       (7)
                                                                                             [25]

Copyright reserved                                                             Please turn over

### Page 10

Downloaded from hlayiso.com
Mechanical Technology                                   10                             DBE/Feb.–Mar. 2016
                                                 NSC – Memorandum

QUESTION 7: FORCES

7.1       Resultant
                                                        2,1
                                                        kN
                        1,5 kN
                                            1,5cos40°

                          1,5sin40°                   50°
                                                40°         90°                      4,7kN
                                                 50° 130°

                                3,1sin50°

                        3,1 kN              3,1cos50°

          7.1.1 ∑ HC = 4,7 - 3,1cos50° - 1,5cos40°
                     = 4,7 - 1,99 - 1,15                                       
                                                                               
                     = 1,56k N

          7.1.2 ∑ VC = 2,1 + 1,5sin40° − 3,1sin50°
                     = 2,1 + 0,96 − 2,37                                       
                                                                               
                     = 0,69 kN

            7.1.3                           Magnitudes        7.1.4                  Magnitudes
            Horizontal                                        Vertical
            components                                        components
            4,7 kN                      4,7 kN               2,1 kN             2,1 kN 
            3,1 kN Cos50°               -1,99 kN             1,5 kN Sin40 0     0,96 kN 
            1,5 kN Cos40°               -1,15 kN             3,1 kN Sin50°      -2,37 kN 
            TOTAL                       1,56 kN              TOTAL              0,69 kN

Copyright reserved                                                                            Please turn over

### Page 11

Downloaded from hlayiso.com
Mechanical Technology                         11                           DBE/Feb.–Mar. 2016
                                       NSC – Memorandum

          E 2 = HC 2 + VC 2
          E = 1,56 2 + 0,69 2                          
                                                                       1,56kN     
          E = 1,71 kN

                                                               0,69kN
                                                                                    R

            θ = VC                                                        23,86°
           Tan
                 HC
                 0,69                                  
               =
                 1,56                                  
       θ       = 23,86 0
                                                       
          E   = 1,71k N at 23,86 0 north from east                                                (15)

7.2       Stress and Strain

          Forces
                                           π 2
                                       Area = D
          Force = load × gravity                4
                = 600 ×10                  π × 0,016 2
                                            =                   
                = 6000N                          4
                                            = 2,011× 10 − 4 m 2 

                             Force              
                     Stress =
                              Area
                                 6000
                           =                    
                             2,011×10 − 4
                           = 29841551, 83 Pa
                           = 29,84 MPa          
                                                                                                  (6)

7.3       One Pascal (1 Pa) is equal to one Newton force (1 N)  acting onto  an
          area of one square metre (1 m2)                                                        (3)

Copyright reserved                                                                 Please turn over

### Page 12

Downloaded from hlayiso.com
Mechanical Technology                             12                                 DBE/Feb.–Mar. 2016
                                           NSC – Memorandum

7.4       Reactions
                                     Taking moments around A
                                              =

                     (B × 3,5 ) + (1400 × 0,7 ) = (350 × 6,7 )2,65 + (1600 × 6)          
                                 3,5B + 980 =6214,25 + 9600
                                                                                         
                                        3,5B 6214,25 + 9600 − 980
                                              =
                                         3,5            3,5                              
                                            B = 4238,36 N

                                     Taking moments around B
                                              =

                         (A × 3,5 ) + (1600 × 2,5 ) = (350 × 6,7 )0,85 + (1400 × 4,2 )   
                                    3,5A + 4000 = 1993,25 + 5880
                                                                                         
                                            3,5A 1993,25 + 5880 - 4000
                                                  =                                      
                                             3,5            3,5
                                                A = 1106,64 N                                               (6)
                                                                                                            [30]

Copyright reserved                                                                           Please turn over

### Page 13

Downloaded from hlayiso.com
Mechanical Technology                      13                          DBE/Feb.–Mar. 2016
                                    NSC – Memorandum

QUESTION 8: MAINTENANCE

8.1       Routine maintenance.
          • Tear on the belt.
          • Misalignment of belt drive. 
          • Overheating of components. 
          • Belt slip. 
          • Belt wear. 
          • Pulley wear. 
          • Financial loss due to the damage suffered.
          • Loss of valuable production time. 
                                                                          (Any 2 x 1)       (2)

8.2       Cutting fluid
          • To allow it to flow easily 
          • Dissipate excess heat 
          • Prevent excessive load on pump 
                                                                          (Any 2 x 1)       (2)

8.3       Flash point
          Is the lowest temperature at which the oil gives off a vapour which will
          ignite.                                                                         (2)

8.4       'API'
          American Petroleum Institute                                                    (2)

8.5       Automatic transmission fluid
          • Transmit power in the torque convertor 
          • Let hydraulic fluid transmit energy in order to move various parts such as
             the servo unit. 
          • Acts as heat transfer medium to transfer heat within the transmission to
             outside and assist in cooling it down. 
          • Acts as a lubricant for gears and bearings. 
                                                                       (Any 2 x 1)          (2)

8.6       Replace belt in a drill press
          • Machine should be switched off the locked out. 
          • Tension on the belt to be released by loosening an adjusting screw or
             releasing the belt tensioner. 
          • Remove the belt. 
          • Replace with new belt of the correct type and size. 
          • The belt should be re-tensioned and aligned. 
                                                                                            (5)
                                                                                            [15]

Copyright reserved                                                            Please turn over

### Page 14

Downloaded from hlayiso.com
Mechanical Technology                            14                          DBE/Feb.–Mar. 2016
                                          NSC – Memorandum

QUESTION 9: SYSTEMS AND CONTROL

9.1       Gear drive

          9.1.1           Rotational frequency of the electric motor:

            NA TB × TD
                =                                      
            ND T A × TC
                  80 × 63 × 2
            NA =                                       
                    30 × 40
                  10080
            NA =                                       
                   1200
            N A = 8,4 r/s                                                                       (5)

          9.1.2           Speed ratio of gear train:

                              Input                                       Driven teeth
          Speed ratio =                                      Speed ratio =
                              Output                                      Driver teeth
                              8,4                                         80 63           
                            =                   OR                     =     ×
                               2                                          30 40
                                                                                          
                            = 4,2 : 1                                  = 4,2 : 1                 (2)

9.2       Belt drive

          9.2.1           Diameter of the driven pulley

          N1 × D1 = N2 × D 2
                         N2 × D 2
               N1 =                                
                           D1
                       7,2 × 600                   
                     =
                          800
                     = 5,4 r/s                                                                   (3)

Copyright reserved                                                                  Please turn over

### Page 15

Downloaded from hlayiso.com
Mechanical Technology                            15                       DBE/Feb.–Mar. 2016
                                          NSC – Memorandum

          9.2.2       Power transmitted:

                                                             T1
                                                                = 2,5
           P = (T1 − Tπ
                      2)                                     T2
                        Dn
                         π × 0,6 × 7,2
           P =( 300 − 120)                                       300          
                                                             T2 =
             = 2442,90 Watt                                       2,5
                                                  
             = 2,44 kW                                          = 120 N

                                                  OR

                                                             T1
                                                                = 2,5
           P = (T1 − Tπ
                      2)                                     T2
                        Dn
                         π × 0,8 × 5 ,4
           P =( 300 − 120)                                      300
                                                             T2 =
             = 2442,90 Watt                                      2,5
                                                                              
             = 2,44 kW                                         = 120 N                         (3)

9.3       The volume of gas can be changed by the altering of ...
          • its pressure 
          • its temperature 
          • both its pressure and temperature 
                                                                             (Any 2 x 1)       (2)

9.4       Definition of Boyle's law
          The volume of a given mass of gas is inversely proportional to the
          pressure on it, if the temperature remains constant                                (3)

Copyright reserved                                                               Please turn over

### Page 16

Downloaded from hlayiso.com
Mechanical Technology                           16          DBE/Feb.–Mar. 2016
                                         NSC – Memorandum

9.5       Hydraulics

          9.5.1         Fluid pressure

             π 2
           AA = D
                  4
             π         2
              = 0,04
                    4
              = 1,26 × 10 -3 m 2                    

                  F
          PA =
                  AA
                   80
              =             Pa                      
               1,26 × 10 -3
              = 63661,98 Pa
              = 63,66 kPa                           
                                                                                 (3)

          9.5.2         Diameter of piston B

           PB = PA
                  FB
          PB =
                  AB                                
                  FB
          AB =
                  PB
                    320
          AB =
                  63492,06
          A B = 5,04 × 10 -3                        
              π 2
           A=D
                  4                                 
                  AB × 4
          DB = π

                     5,04 × 10 −3 × 4
              =          π
              = 0,08 m
                                                                                (4)
              = 80 mm
                                                                                 [25]

Copyright reserved                                                 Please turn over

### Page 17

Downloaded from hlayiso.com
Mechanical Technology                      17                         DBE/Feb.–Mar. 2016
                                    NSC – Memorandum

QUESTION 10: TURBINES

10.1      Water turbine blades
          To supply water pressure  to the turbine                                             (2)

10.2      Reverse flow
          • Deriaz 
          • Francis                                                                             (2)

10.3      Supercharger
          • Roots
          • Twin screw
          • Centrifugal 
          • Vane 
                                                                          (Any 2 x 1)      (2)

10.4      Turbocharger
          • Exhaust gases drive the turbine 
          • The turbine drives a compressor via a common shaft
          • The compressor forces  compressed air above atmospheric pressure
             into the cylinder 
          • Exhaust gases leave system through the exhaust pipe                           (5)

10.5      Supercharger over turbocharger
          • Do not suffer lag 
          • More efficient at low revolution per minute. 
          • Does not require extensive exhaust modification.
          • No special shutdown procedure is required. 
                                                                          (Any 2 x 1)      (2)

10.6      Lag
          Lag is the delay  between pressing the accelerator pedal  and feeling the
          pressure building up.                                                           (3)

10.7      Supercharger drive
          • Belt drive 
          • Gear drive 
          • Chain drive 
                                                                          (Any 2 x 1)      (2)

Copyright reserved                                                           Please turn over

### Page 18

Downloaded from hlayiso.com
Mechanical Technology                      18                        DBE/Feb.–Mar. 2016
                                    NSC – Memorandum

10.8      Gas turbine disadvantages
          • Cost is much greater than for a similar-sized reciprocating engine since
             the materials must be stronger and more heat resistant. 
          • Manufacturing operations are also more complex. 
          • Usually less efficient than reciprocating engines, especially at idling
             speed. 
          • Delayed response to changes in power settings. 
                                                                         (Any 2 x 1)      (2)
                                                                                          [20]

                                                                            TOTAL:        200

Copyright reserved

## Related documents

- [MT Feb March 2016 Afr](https://www.hlayiso.com/library/mt-feb-march-2016-afr/c6045d95-1e69-45d4-b04b-8316e67a8172) — Mechanical Technology · QP · 2016 · Afr
- [Gr12 MCHT S16 MEMO Eng](https://www.hlayiso.com/library/gr12-mcht-s16-memo-eng/153275b7-9d23-4a2c-bc3e-dadda11f387f) — Mechanical Technology · Memo · 2016 · Eng
- [Mechanical Technology Nov 2016 Memo Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2016-memo-eng/5e2bea9e-f108-440c-a98e-4984091bb5af) — Mechanical Technology · Memo · 2016 · Eng
- [Mechanical Technology Feb March 2018 Memo Afr](https://www.hlayiso.com/library/mechanical-technology-feb-march-2018-memo-afr/ff38a98a-516d-4d26-b5de-3f8554214a35) — Mechanical Technology · Memo · 2018 · Afr
- [Gr12 MCHT S16 QP Afr](https://www.hlayiso.com/library/gr12-mcht-s16-qp-afr/9c20cbdb-35c9-416e-9d01-387a3ba92333) — Mechanical Technology · QP · 2016 · Afr
- [Mechanical Technology Feb March 2018 Eng](https://www.hlayiso.com/library/mechanical-technology-feb-march-2018-eng/4240af0f-86fd-4c37-bd71-a5c4c769b35e) — Mechanical Technology · QP · 2018 · Eng

## More from Grade 12 Mechanical Technology

- [Gr 12 Weld Met ATP 2023-24](https://www.hlayiso.com/library/gr-12-weld-met-atp-2023-24/8ecc8de5-c625-4611-9b94-1f3fd325e05d) — ATP
- [Mechanical Technology Nov 2024 (Automotive) Eng](https://www.hlayiso.com/library/mechanical-technology-nov-2024-automotive-eng/5d2e2bd0-b02f-4218-849f-e7933bc6c4d1) — QP · 2024 · Eng
- [Mechanical Technology Nov 2024 (Fitting and Machining) Afr](https://www.hlayiso.com/library/mechanical-technology-nov-2024-fitting-and-machining-afr/1e7205e4-aef1-4cc4-afdf-aac93562ae67) — QP · 2024 · Afr
- [Mechanical Technology May-June 2024 (Welding and Metalwork) MG Afr](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-memorandum-afrikaans/552ebeca-d294-4c37-b3fb-cded79fa438f) — Memo · 2024 · Afr
- [Mechanical Technology May-June 2024 (Automotive) Eng](https://www.hlayiso.com/library/grade-12-mechanical-technology-2024-nsc-june-exam-question-paper-english/10859467-be3e-41fb-aee0-b797c385437d) — QP · 2024 · Eng
- [MECH TECH GR12 MEMO SEPT2023 Welding Afrikaans](https://www.hlayiso.com/library/mech-tech-gr12-memo-sept2023-welding-afrikaans/f45c553c-63a1-4e1c-b9c6-d426a3dfef26) — Memo · 2023 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
