# Technical Sciences Grade 12 P1 Eastern Cape Mock 2018 QP

> Grade 12 Technical Sciences Paper 1 question paper from the Eastern Cape Mock Exam 2018 (English), 24 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/technical-sc-p1-gr12-qp-sept-2018-eng-d/ece5a368-11cd-4f68-a141-758b576ca59a
- Updated: 2026-09-27
- Subject: Technical Sciences
- Grade: Grade 12
- Document type: Question paper
- Year: 2018
- Exam period: Eastern Cape Mock Exam
- Paper: 1
- Curriculum: CAPS
- Pages: 24

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Technical Sciences](https://www.hlayiso.com/library/grade-12/technical-sciences) › [Technical Sciences Grade 12 P1 Eastern Cape Mock 2018 QP](https://www.hlayiso.com/library/technical-sc-p1-gr12-qp-sept-2018-eng-d/ece5a368-11cd-4f68-a141-758b576ca59a)

## About this document

Technical Sciences · Grade 12 · Eastern Cape Mock Exam · 2018. Question paper, 24 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                               NATIONAL
                          SENIOR CERTIFICATE

                                   GRADE 12

                           SEPTEMBER 2018

                    TECHNICAL SCIENCES P1

MARKS:      150

TIME:       3 hours

                                      *TSCE1*

         This question paper consists of 18 pages including 2 information sheets.

### Page 2

Downloaded from hlayiso.com
2                                  TECHNICAL SCIENCES P1                   (EC/SEPTEMBER 2018)

INSTRUCTIONS AND INFORMATION

Read the following instructions carefully before answering the questions

1.     Write your FULL NAME and SURNAME in the appropriate spaces on the
       ANSWER BOOK.

2.     Answer ALL the questions.

3.     Start each question on a NEW page in the answer book.

4.     Non-programmable calculators may be used.

5.     Appropriate mathematical instruments may be used.

6.     Number the answers correctly according to the numbering system used in
       this question paper.

7.     Show ALL formulae and substitutions in ALL calculations.

8.     Round off your FINAL numerical answers to a minimum of TWO decimal
       places.

9.     Give brief motivations, discussions, et cetera where required.

10.    TWO DATA SHEETS are attached for your use.

11.    Write neatly and legibly.

Copyright reserved                                                            Please turn over

### Page 3

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)              TECHNICAL SCIENCES P1                                            3

 QUESTION 1: (MULTIPLE-CHOICE QUESTIONS)

 Four options are provided as possible answers to the following questions. Each
 question has only ONE correct answer. Write only the letter (A–D) next to the
 question number (1.1–1.10.) in the ANSWER BOOK, for example 1.11 E.

 1.1      The property of a body to resist any change in its state of motion or rest
          is its…

          A      mass.
          B      force.
          C      inertia.
          D      acceleration.                                                            (2)

 1.2      The rate at which velocity changes is ...

          A      displacement.
          B      acceleration.
          C      force.
          D      energy.                                                                  (2)

 1.3      The figure below shows forces F1 and F2 that are applied on an object
          placed on a frictionless surface. The object accelerates in the direction
          of the arrow indicated above the object.

          Which ONE of the following statements is correct?

          A      F1 = F2
          B      F1 > F2
          C      F1 < F2
          D      F1 + F2 = 0                                                              (2)

 1.4      In the equation Fnet Δt = Δp, the product FnetΔt represents …

          A      change in momentum.
          B      force per unit time.
          C      impulse.
          D      rate of change of momentum.                                              (2)

Copyright reserved                                                             Please turn over

### Page 4

Downloaded from hlayiso.com
4                              TECHNICAL SCIENCES P1                        (EC/SEPTEMBER 2018)

 1.5      The work done to lift an object of mass 10 kg to a height 10 m in 5 s is
          980 J. The work done to lift the same object through the same distance
          in 10 s is …

          A      490 J
          B      980 J
          C      1470 J
          D      1960 J                                                                 (2)

 1.6      The property of a body to regain its original shape and size when the
          deforming force is removed is known as ...

          A      stress.
          B      strain.
          C      elasticity.
          D      plasticity.                                                            (2)

 1.7      Steel balls of equal masses are dropped into test tubes with motor oils of
          different viscosities. Which ONE of the following has the highest
          viscosity?

                      A              B               C               D                    (2)

 1.8      The capacitance of a parallel plate capacitor is C when the area of the
          plate is A. What would be the capacitance if the area of the plates is
          doubled?

          A      Halved
          B      Doubled
          C      Tripled
          D      Quadrupled                                                             (2)

Copyright reserved                                                             Please turn over

### Page 5

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)            TECHNICAL SCIENCES P1                                           5

 1.9      A magnetic flux density B acts perpendicular to a surface as shown in
          the diagram.

          How would the magnetic flux change if the value of B increases?

          A      Increases
          B      Decreases
          C      Remains the same
          D      Decreases then increases                                              (2)

 1.10     The diagram below shows a conductor which is moved in a magnetic
          field. In which direction would one move the conductor so that the
          current in the conductor flows out of the plane of the paper?

          A      Towards P
          B      Towards Q
          C      Towards R
          D      Towards S                                                             (2)
                                                                                      [20]

Copyright reserved                                                          Please turn over

### Page 6

Downloaded from hlayiso.com
6                               TECHNICAL SCIENCES P1                       (EC/SEPTEMBER 2018)

 QUESTION 2

 A builder connected two trolleys by using a light string as shown in the diagram
 below. He places bricks in the trolleys. Trolley A then has a mass of 30 kg and
 trolley B has a mass of 20 kg. He pulls the trolleys over a frictionless surface
 with a force F = 500 N acting at an angle of 30° to the horizontal.

 Force of friction on trolley A is 8,8 N and on B is 39,4 N.

 2.1    State Newton’s Second Law of motion in words.                                    (2)

 2.2    Name TWO contact forces in the above diagram.                                    (2)

 2.3    Draw the free-body diagram of ALL the forces acting on trolley A.                (5)

 2.4    Calculate the acceleration of trolleys.                                          (6)

 2.5    Calculate the tension T on the string.                                           (3)

 2.6    The tension experienced by trolley B is equal to the tension experienced by
        trolley A. Name and state the law that supports this statement.                  (3)
                                                                                        [21]

Copyright reserved                                                             Please turn over

### Page 7

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)             TECHNICAL SCIENCES P1                                             7

 QUESTION 3

 A car of mass 800 kg travels due east with a velocity of 120 km.h-1 and collides
 head on with a construction truck of mass 2500 kg that travels with a velocity of
 70 km.h-1 due west. After the collision, the car and the truck move together.

 3.1    Define momentum.                                                                  (2)

 3.2    State the law of conservation of momentum.                                        (2)

 3.3    Calculate the velocity of the car and truck combination after the collision.      (5)

 3.4    The car was fitted with an airbag. Explain how the airbag reduces the fatal
        injuries on a driver.                                                             (3)
                                                                                         [12]

Copyright reserved                                                             Please turn over

### Page 8

Downloaded from hlayiso.com
8                               TECHNICAL SCIENCES P1                  (EC/SEPTEMBER 2018)

 QUESTION 4

 The figures below show two workers, pulling concrete blocks of mass 100 kg on
 the same surface. (Ignore force of friction)

 WORKER 1: pulled the block horizontally across the ground surface for 5 m
 by applying a force of 70 N at an angle 20° with the horizontal.

 WORKER 2: pulled the same block over the same distance by applying a force
 of 70 N horizontally.

       WORKER 1          70                N
                                     20°

                                           5m

       WORKER 2
                              70 N

                                           5m
 4.1    Define the term work.                                                      (2)

 4.2    Calculate the work done by WORKER 1 to pull the block over a distance
        5 m.                                                                       (3)

 4.3    Is the work done by WORKER 2 GREATER THAN, LESS THAN or
        EQUAL TO the work done by WORKER 1?                                        (1)
                                                                                   [6]

Copyright reserved                                                        Please turn over

### Page 9

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)            TECHNICAL SCIENCES P1                                              9

 QUESTION 5

 A trolley of mass 10 kg filled with bricks of mass 40 kg is pulled up the incline
 with a force of 100 N. The trolley and its contents move at a constant velocity of
 5 m.s-1 up the incline. (IGNORE FRICTION.)

 5.1 Define the term power.                                                                (2)

 5.2 Calculate the power generated to pull the trolley and its contents up the
     incline.                                                                              (3)

       At point A, which is 10 m above the ground, the bricks are offloaded and
       then released. The trolley moves down the inclined plane and reaches
       point B.

 5.3 At what point will the gravitational potential energy of the trolley be
     maximum?                                                                              (2)

 5.4 Calculate the velocity of the trolley when it reaches point B.                        (4)

 5.5 Name and state the law used to answer QUESTION 5.4.                                   (3)
                                                                                          [14]

Copyright reserved                                                             Please turn over

### Page 10

Downloaded from hlayiso.com
10                              TECHNICAL SCIENCES P1                         (EC/SEPTEMBER 2018)

 QUESTION 6

 6.1 Grade 12 students carry out an experiment to find out how far a spring
     stretches when loads are added to it. The results obtained are used to draw
     the following graph. The unloaded length of the spring is 15 cm.

                                  FORCE vs EXTENSION

       6.1.1    What is the extension of the spring when the applied force is 3 N?         (1)

       6.1.2    When an object of unknown mass ‘m’ is hung on the spring, the
                length of the spring is 1,7 cm. Calculate the mass ‘m’.                    (4)

       6.1.3    Define the term strain.                                                    (2)

       6.1.4    Calculate strain for a force of 5 N by using the information given in
                the graph.                                                                 (4)

 6.2 A steel wire has a strain of 3,6 x 10-4 and the modulus of elasticity is
     2 x 1011Pa.

       6.2.1    State Hooke’s law.                                                         (2)

       6.2.2    Calculate the stress.                                                      (3)
                                                                                          [16]

Copyright reserved                                                               Please turn over

### Page 11

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)             TECHNICAL SCIENCES P1                                            11

 QUESTION 7

 Ayanda made two identical holes at points 1 and 2 in a plastic container filled
 with water as shown in the diagram.

       7.1.1     Define the term pressure.                                                 (2)

       7.1.2     Is the pressure of water at point 1 GREATER THAN, LESS THAN
                 or EQUAL TO the pressure of water at point 2? Explain your
                 answer.                                                                   (3)

       7.1.3     Why is the water from the hole at point 2 forced out farther than
                 the water from hole at point 1?                                           (2)

 7.2 Andile, the auto mechanic is raising a 1200 kg car on her hydraulic lift so
     that she can work underneath. The area of the input piston is 10 cm2 and
     the output piston has an area of 600 cm2.

       7.2.1     State Pascal’s Law.                                                       (2)

       7.2.2     Calculate the force that must be exerted on the input piston to lift
                 the car.                                                                  (4)
                                                                                          [13]

Copyright reserved                                                              Please turn over

### Page 12

Downloaded from hlayiso.com
12                                 TECHNICAL SCIENCES P1                      (EC/SEPTEMBER 2018)

 QUESTION 8

 The ability of capacitors to store charge makes them essential components in
 electrical appliances. Users are often warned of the dangers associated with
 capacitors inside appliances.

 8.1    What is a capacitor?                                                              (2)

 8.2    Briefly explain why it can be dangerous to touch a charged capacitor.             (2)

 8.3    A certain parallel plate capacitor consists of two identical aluminium
        plates, each of area 2 x 10-4 m2. The plates are separated by a distance of
        0,03 mm, with air occupying the space between the plates.

        8.3.1        Calculate the capacitance of the capacitor.                          (3)

        8.3.2        Calculate the charge stored on the plates of the capacitor when
                     connected to a 6 V battery.                                          (3)
                                                                                         [10]

Copyright reserved                                                               Please turn over

### Page 13

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)                TECHNICAL SCIENCES P1                                        13

 QUESTION 9

 9.1    An n-type semiconductor is made by adding impurity atoms to a pure
        semiconductor material.

        9.1.1    How many valence electrons does the impurity atom have in its
                 outer shell?                                                             (1)

        9.1.2    What will the net charge be on the semiconductor after the
                 addition of the impurity atoms?                                          (1)

 9.2    The diagram below represents a p-n junction diode.

        Draw a diagram showing the p-n junction diode connected to a battery so
        that the junction is reverse bias.                                                (2)

 9.3    The following graph shows the relationship between current and potential
        difference for a diode when it is forward biased.

        9.3.1         What is the minimum voltage for this diode to conduct?              (2)

        9.3.2         What happens to the resistance of the diode if the potential
                      difference is increased above the minimum voltage mentioned in
                      QUESTION 9.3.1?                                                     (2)
                                                                                          [8]

Copyright reserved                                                             Please turn over

### Page 14

Downloaded from hlayiso.com
14                              TECHNICAL SCIENCES P1                         (EC/SEPTEMBER 2018)

 QUESTION 10

 A kettle is marked 240 V; 1500 W.

 10.1   What is the meaning of 1500 W in the specification given above?                     (2)

 10.2   Calculate the resistance of the kettle when operating at the above-
        mentioned specifications.                                                           (4)

 10.3   If the kettle takes 3 minutes to boil the water, calculate the amount of
        electrical energy transferred to the kettle.                                        (4)
                                                                                           [10]

Copyright reserved                                                                 Please turn over

### Page 15

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)               TECHNICAL SCIENCES P1                                        15

QUESTION 11

11.1      A transformer is used to convert a potential difference of 240 V AC to
          12 V AC to run a toy train. The transformer has 300 turns on its
          secondary coil.

          11.1.1      What is a transformer?                                             (2)

          11.1.2      Calculate the number of turns needed on the primary coil.          (3)

          11.1.3      Is this a step-up or a step-down transformer?                      (1)

11.2      Consider a solenoid coil of 11 turns. The solenoid is subjected to a
          varying magnetic field that changes the magnetic influx uniformly from
          5,34 Wb to 2,7 Wb in an interval of 12 s.

          11.2.1      State Faraday’s Law of electromagnetic induction.                  (2)

          11.2.2      Calculate the magnitude of the induced emf.                        (3)
                                                                                        [11]

Copyright reserved                                                            Please turn over

### Page 16

Downloaded from hlayiso.com
16                            TECHNICAL SCIENCES P1                      (EC/SEPTEMBER 2018)

QUESTION 12

The diagram below shows a generator.

12.1      What type of generator is shown in the diagram?                            (1)

12.2      What energy conversion takes place in the above generator?                 (1)

12.3      Name the parts indicated by:

          12.3.1     A                                                               (1)

          12.3.2     B                                                               (1)

12.4      Sketch a graph of induced emf versus time for ONE complete rotation of
          the coil.                                                                  (3)

12.5      Name any TWO uses of a DC generator.                                       (2)
                                                                                     [9]

                                                                        TOTAL:       150

Copyright reserved                                                          Please turn over

### Page 17

Downloaded from hlayiso.com
(EC/SEPTEMBER 2018)                  TECHNICAL SCIENCES P1                                            17

                               DATA FOR TECHNICAL SCIENCES GRADE 12
                                             PAPER 1

                            GEGEWENS VIR TEGNIESE WETENSKAPPE GRAAD 12
                                            VRAESTEL 1

        INFORMATION SHEETS – PAPER 1/INLIGTINGSBLAD – VRAESTEL 1

        TABLE 1: PHYSICAL CONSTANTS/TABEL 1: FISIESE KONSTANTES

        NAME/NAAM                                    SYMBOL/SIMBOOL             VALUE/WAARDE
        Acceleration due to gravity/                        g                   9,8 m·s-2
        Swaartekragversnelling

        TABLE 2: FORMULAE/FORMULES

        FORCE/KRAG

         Fnet ma                                     p mv
              max
         fs             P sN                         fk   PkN
         Fnet Δt = Δp                                Fg mg
         Δp = mv f - mv i

        WORK, ENERGY AND POWER/ARBEID, ENERGIE EN DRYWING

         W F'x cos T                                      U mgh            or     EP mgh
           1                              1               'K    K f  Ki   or    'Ek Ekf  Eki
         K   mv 2                    Ek     mv 2
           2                    or        2
        ME = Ek + Ep                                           W
                                                          P
                                                               't
        Pave = Fvave

        ELASTICITY, VISCOSITY AND HYDRAULICS/ELASTISITEIT,
        VISKOSITEIT EN HIDROULIKA

                     F                             Δ"
         V                                       ε
                     A                              L
         σ                                       F1 F2
                    K
         ε                                       A1 A 2

        ELECTROSTATICS/ELEKTROSTATIKA

                    N εο Α                εο Α                  V
         C                           C                    E
                        d      and         d                    d
                    Q
         C
                    V

Copyright reserved                                                                      Please turn over

### Page 18

Downloaded from hlayiso.com
18                           TECHNICAL SCIENCES P1    (EC/SEPTEMBER 2018)

          CURRENT ELECTRICITY/STROOMELEKTISITEIT

             V                       q    I 't
          R
             I
          W = VQ                        W
                                     P
          W = VI ' t                    Δt
          W = I2R ' t               P = VI
               V 2 Δt               P = I 2R
          W= R                            V2
                                     P
                                          R
          Rs R1  R2  ...
           1 1 1
                     ...
          R p R1 R 2

          ELECTROMAGNETISM/ELEKTROMAGNETISME

          I BA                                   ΔI
                                         ɛ =N
                                                 Δt
          Vs    Ns
          Vp    Np

Copyright reserved                                       Please turn over

### Page 19

Downloaded from hlayiso.com

### Page 20

Downloaded from hlayiso.com

### Page 21

Downloaded from hlayiso.com

### Page 22

Downloaded from hlayiso.com

### Page 23

Downloaded from hlayiso.com

### Page 24

Downloaded from hlayiso.com

## Related documents

- [TECHNICAL SC P1 GR12 QP SEPT 2018 ENG](https://www.hlayiso.com/library/technical-sc-p1-gr12-qp-sept-2018-eng/92b206a8-9207-4665-a710-593126afc099) — Technical Sciences · QP · 2018 · Eng
- [Technical Sciences P1 Memo](https://www.hlayiso.com/library/technical-sciences-p1-memo/e21a0ac0-23e0-4b26-84c9-ab236d6fd345) — Technical Sciences · Memo · 2018
- [TECH SCIENCE P2 GR12 QP ENG SEPT2018 D](https://www.hlayiso.com/library/tech-science-p2-gr12-qp-eng-sept2018-d/33bdf394-6ac0-4301-b12b-f4f0a2446492) — Technical Sciences · QP · 2018 · Eng
- [TECH SCIENCE P2 GR12 QP AFR SEPT2018](https://www.hlayiso.com/library/tech-science-p2-gr12-qp-afr-sept2018/284452b1-3391-467d-be7d-eb0ef11ce446) — Technical Sciences · QP · 2018 · Afr
- [Grade 12 NSC Technical Science P1 X5 Preparatory 2018 Question Paper](https://www.hlayiso.com/library/grade-12-nsc-technical-science-p1-x5-preparatory-2018-question-paper/037dc483-3a4e-48fc-9e14-6a8c4840e7d1) — Technical Sciences · QP · 2018
- [TECH SCIENCES P1 QP GR12 SEPT2023 Afrikaans](https://www.hlayiso.com/library/tech-sciences-p1-qp-gr12-sept2023-afrikaans/4749a08d-f323-49b8-b7e3-6dad8bffd071) — Technical Sciences · QP · 2023 · Afr

## More from Grade 12 Technical Sciences

- [Grade 12 Technical Sciences P1 November 2026 Mock Memo](https://www.hlayiso.com/library/grade-12-technical-sciences-2026-nsc-november-mock-exam-memorandum-paper-1/5543b9af-5bb3-4e43-95e3-ad6028ca21e8) — Memo · 2026 · Eng
- [Gr 12 Tech Sci ATP 2023-24](https://www.hlayiso.com/library/gr-12-tech-sci-atp-2023-24/a7a03e64-2e18-4f50-a7fa-6eb1a25136c7) — ATP
- [TECH SC P1 MEMO GR12 SEPT 2025 E+A watermark](https://www.hlayiso.com/library/tech-sc-p1-memo-gr12-sept-2025-e-a-watermark/4a156330-3801-46dc-b908-43c35dc64891) — Memo · 2025
- [TECHNICAL SCIENCES P2 MG GR12 SEPT2025 watermark](https://www.hlayiso.com/library/technical-sciences-p2-mg-gr12-sept2025-watermark/717f8fcd-96bb-4848-8cb7-68903a8f0550) — Memo · 2025
- [Gr 12 Technical Sciences P1 (Afrikaans) 2025 Possible Answers](https://www.hlayiso.com/library/grade-12-technical-sciences-2025-gauteng-mock-exam-memorandum-paper-1-afrikaans/c7c4d69c-4717-4837-816e-1fccc4d1ede2) — Memo · 2025 · Afr
- [Gr 12 Technical Sciences P2 (Afrikaans) 2025 Possible Answers](https://www.hlayiso.com/library/grade-12-technical-sciences-2025-gauteng-mock-exam-memorandum-paper-2-afrikaans/50a2cf5c-c602-45e7-a8dc-244289a85556) — Memo · 2025 · Afr

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
