# Technical Sciences Grade 12 P1 GP Prelim 2023 QP (Eng)

> Grade 12 Technical Sciences Paper 1 question paper from the GP Prelim 2023 (English), 16 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/technical-sciences-p1-english-qp/2c25951e-f501-41d6-bf5d-eac3e246f09a
- Updated: 2026-09-27
- Subject: Technical Sciences
- Grade: Grade 12
- Language: English
- Document type: Question paper
- Year: 2023
- Exam period: GP Prelim
- Paper: 1
- Curriculum: CAPS
- Pages: 16

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Technical Sciences](https://www.hlayiso.com/library/grade-12/technical-sciences) › [Technical Sciences Grade 12 P1 GP Prelim 2023 QP (Eng)](https://www.hlayiso.com/library/technical-sciences-p1-english-qp/2c25951e-f501-41d6-bf5d-eac3e246f09a)

## About this document

Technical Sciences · Grade 12 · GP Prelim · 2023 · English. Question paper, 16 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Matching paper and memo

- [Technical Sciences P1 (English) Memo](https://www.hlayiso.com/library/technical-sciences-p1-english-memo/036cde07-8a86-4b6d-a9ba-2a4da6e21b9e) — Memo · 2023 · Eng

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

PREPARATORY EXAMINATION
             2023
             11101

       TECHNICAL SCIENCES

            (PAPER 1)

                        TIME: 3 hours

                        MARKS: 150

                        13 pages + 3 data sheets

                                                   P.T.O.

### Page 2

Downloaded from hlayiso.com
                                                TECHNICAL SCIENCES
                                                                                      2
                                                (PAPER 1)          11101/23

INSTRUCTIONS AND INFORMATION

1.   Write your name in the ANSWER BOOK.

2.   This question paper consists of TEN questions. Answer ALL the questions in the
     ANSWER BOOK.

3.   Start EACH question on a NEW page in the ANSWER BOOK.

4.   Number the answers correctly according to the numbering system used in this
     question paper.

5.   Leave ONE line between two subsections, e.g. between QUESTION 2.1 and
     QUESTION 2.2.

6.   You may use a non-programmable calculator.

7.   You may use appropriate mathematical instruments.

8.   You are advised to use the attached DATA SHEETS.

9.   Show ALL formulae and substitutions in ALL calculations.

10. Round-off your FINAL numerical answers to a minimum of TWO decimal places.

11. Give brief motivations, discussions, et cetera where required.

12. Write neatly and legibly.

                                                                                      P.T.O.

### Page 3

Downloaded from hlayiso.com
                                                  TECHNICAL SCIENCES
                                                                                          3
                                                  (PAPER 1)          11101/23

QUESTION 1: MULTIPLE-CHOICE QUESTIONS

Four options are provided as possible answers to the following questions. Each question
has only ONE correct answer. Choose the answer and write down only the letter (A – D)
next to the question numbers (1.1 to 1.10) in your ANSWER BOOK.

1.1 The force that the Earth exerts on any object on or near its surface is called ...

     A     normal force.
     B     applied force.
     C     gravitational force.
     D     tension force.                                                                  (2)

1.2 When a car moves at a constant velocity, the resultant force acting on the body is
    zero. This phenomenon is best explained by ...

     A     Newton’s First Law.
     B     Newton’s Second Law.
     C     Newton’s Third Law.
     D     gravitational acceleration.                                                     (2)

1.3 The net force exerted on an object is equal to the ...

     A     rate of change in velocity.
     B     rate of change in momentum.
     C     impulse exerted on the object.
     D     change in momentum of the object.                                               (2)

1.4 Which of the following is the unit of impulse?

     A     Ampere (A)
     B     Coulomb (C)
     C     Newton-second (Nꞏs)
     D     Newton (N)                                                                      (2)

                                                                                          P.T.O.

### Page 4

Downloaded from hlayiso.com
                                                 TECHNICAL SCIENCES
                                                                                          4
                                                 (PAPER 1)          11101/23

1.5 An object is dropped from a height, h, above ground level. Ignore the effects of
    air resistance.

     Which of the following graphs BEST represents the relationship between its kinetic
     energy, K and its height, h above ground level?

                                                                                           (2)

1.6 Which term BEST describes a force that is equal and opposite to the deforming
    force?

     A    Strain
     B    Stress
     C    Applied force
     D    Restoring force                                                                  (2)

1.7 The device that can convert electrical energy to mechanical energy is called a ...

     A    dynamo.
     B    alternator.
     C    electric motor.
     D    generator.                                                                       (2)

                                                                                          P.T.O.

### Page 5

Downloaded from hlayiso.com
                                                 TECHNICAL SCIENCES
                                                                                     5
                                                 (PAPER 1)          11101/23

1.8    Consider the following four variables:

       (i)     Current between plates
       (ii)    Distance between plates
       (iii)   Type of dielectric material
       (iv)    Total surface area of plates

       Which of these factors affects the capacitance of a capacitor?

       A       (iii), (ii) & (i)
       B       (iv), (iii) & (ii)
       C       (iv), (ii) & (i)
       D       (iv), (iii) & (i)                                                      (2)

1.9    Which of the following terms BEST explains why a pencil in a glass of water
       appears to be cut in half?

       A       Reflection
       B       Interference
       C       Diffraction
       D       Refraction                                                             (2)

1.10   The period of a wave is the:

       A       Number of completed waves that passes a point in one second
       B       Time it takes for one wave to travel past a point
       C       Distance the wave travels in one second
       D       Number of times the wave is repeated in one second                     (2)
                                                                                     [20]

                                                                                     P.T.O.

### Page 6

Downloaded from hlayiso.com
                                                   TECHNICAL SCIENCES
                                                                                              6
                                                   (PAPER 1)          11101/23

QUESTION 2: MATCHING ITEMS

Match the terms in COLUMN B with the descriptions in COLUMN A. Write only the
letter (A – H) next to the question numbers (2.1 to 2.8) in the ANSWER BOOK, e.g.
2.9 I

                     COLUMN A                                    COLUMN B
2.1 The perpendicular force exerted by a surface on    A   Kinetic energy
    an object that lies on that surface

2.2 The product of the mass of an object and its       B   Dielectrics
    velocity

2.3 The energy of an object due to its motion          C   Focal point

2.4 A body that does not show a tendency to regain     D   Normal force
    its original shape and size when the deforming
    force is removed

2.5 The capacitor comprises two plates separated       E   Electromagnetic induction
    by material

2.6 The rate of flow of charge                         F   Perfectly plastic body

2.7 The point in space where parallel light rays meet G Current
    after passing through the lense

2.8 The production of an electromotive force (emf) or H    Momentum
    voltage across an electrical conductor due to
    relative motion between the conductor and
    magnetic field
                                                                                    (8 x 1)    [8]

                                                                                              P.T.O.

### Page 7

Downloaded from hlayiso.com
                                                  TECHNICAL SCIENCES
                                                                                            7
                                                  (PAPER 1)          11101/23

QUESTION 3 (Start on the new page.)

3.1 In the diagram below a learner is pushing the car of 960 kg mass, with force F on
    a rough surface with the acceleration of 2 mꞏs-2. The frictional force between the
    car’s tyres and the surface is 750 N.

     3.1.1   Define the term frictional force.                                               (2)

     3.1.2   Draw the free-body diagram of ALL the forces acting on the car.                 (4)

     3.1.3   Calculate the applied force exerted by the learner on the car.                  (4)

     3.1.4   Calculate the weight of the car.                                                (2)

3.2 Two learners are helping each other to move a big box of 70 kg mass from one
    corner of the room to the other corner. One of the learners is pushing the box with
    force FH of 120 N and the other learner is pulling the same box with a diagonal force
    FD of 180 N at an angle of 15° to the horizontal surface. The box experiences the
    kinetic frictional force of 100 N across the flow.

     3.2.1   State Newton's Second Law of Motion in words.                                   (2)

     3.2.2   From the diagram above, how many forces are acting on the object in total?      (1)

     3.2.3   Calculate the acceleration of the box.                                          (4)

     3.2.4   If the angle of the force FD increases, what will happen to the kinetic
             frictional force? Write only INCREASES, DECREASES OR REMAINS
             THE SAME.                                                                       (1)
                                                                                            [20]

                                                                                            P.T.O.

### Page 8

Downloaded from hlayiso.com
                                                  TECHNICAL SCIENCES
                                                                                            8
                                                  (PAPER 1)          11101/23

QUESTION 4 (Start on the new page.)

4.1 A ball of mass 150 g is thrown against a wall at a velocity of 50 mꞏs-1. The ball
    bounces back towards the hand of the thrower at a velocity of 32 mꞏs-1 as
    illustrated in the diagram below.

     4.1.1   Define the term impulse.                                                        (2)

     4.1.2   Convert the mass of the ball from grams to kilograms (kg).                      (2)

     4.1.3   Will the net force exerted by the ball on the wall INCREASE, DECREASE
             or REMAIN THE SAME if the time of contact between the ball and the
             wall increases?                                                                 (1)

     4.1.4   Calculate the net force exerted by the wall on the ball if the contact time
             between the wall and the ball is 0,012 s.                                       (4)

4.2 Modern vehicles use airbags as a protection system to reduce the risk of death or
    injury during a collision. These airbags inflate at the moment of collision to reduce
    the risk of death or injury.

     4.2.1   Use momentum principles to explain how airbags serve as a protection
             system against injuries.                                                        (2)

     4.2.2   How will the increased change in velocity of the car affect the impulse of
             the car?                                                                        (2)
                                                                                            [13]
                                                                                            P.T.O.

### Page 9

Downloaded from hlayiso.com
                                                   TECHNICAL SCIENCES
                                                                                              9
                                                   (PAPER 1)          11101/23

QUESTION 5 (Start on the new page.)

A 2 kg crate is at rest on a frictionless horizontal surface. The crate is then pushed by a
constant force F of magnitude 5 N to the right. The crate moves at a constant velocity of
1,5 mꞏs-1 on the horizontal surface to cover the distance of 3 m from point A to point B.
When the force is removed at point B, the crate slides down the slope from a height of
0,5 m to point C at the ground. Ignore the effects of friction. Consider the diagram below
and answer the questions that follow.

5.1 Define the term work.                                                                      (2)

5.2 Calculate the net work done on the crate as it moves from point A to point B.              (3)

5.3 Consider the motion from point B to point C on the ground.

     5.3.1   State the principle of conservation of mechanical energy in words.                (2)

     5.3.2   Calculate the kinetic energy of the crate at point B.                             (3)

     5.3.3   Calculate the gravitational potential energy of the crate at point B.             (3)

     5.3.4   Use the principle of conservation of mechanical energy to calculate the
             speed at which the crate hits the ground.                                         (5)
                                                                                              [18]

                                                                                              P.T.O.

### Page 10

Downloaded from hlayiso.com
                                                   TECHNICAL SCIENCES
                                                                                         10
                                                   (PAPER 1)          11101/23

QUESTION 6 (Start on a new page.)

6.1 A minicar and an SUV are connected to each other with a solid steel rod. The
    solid steel rod is 3 m long and has a radius of 0,03 m. The SUV pulls with a force
    of 6 000 N to stretch the solid steel rod by 0,01 m to the right.

     6.1.1   Define the term deforming force.                                             (2)

     6.1.2   Calculate the cross circle area of the solid steel rod.                      (3)

     6.1.3   Calculate the stress experienced by the solid steel rod.                     (3)

     6.1.4   Calculate the strain experienced by the solid steel rod.                     (3)

     6.1.5   State Hooke’s Law in words.                                                  (2)

     6.1.6   Calculate the Young's modulus of elasticity for the solid steel rod.         (4)

6.2 When the temperature of a fluid increases, its viscosity decreases. Liquids that
    are used as lubricating fluids and for several other applications must be selected
    correctly in relation to operating temperatures. The diagram below shows two
    different engine oils of different grades.

     6.2.1   Define the term viscocity.                                                   (2)

                                                                                         P.T.O.

### Page 11

Downloaded from hlayiso.com
                                                            TECHNICAL SCIENCES
                                                                                                 11
                                                            (PAPER 1)          11101/23

     6.2.2              Which of the two oils shown in the diagram above will thicken more in
                        cold weather?                                                             (1)

     6.2.3              Give a reason for your answer in QUESTION 6.2.2.                          (1)

     6.2.4              Which oil can be used during winter, and for cars in cooler regions to
                        keep the engine functioning optimally?                                    (1)

     6.2.5              State ONE function of motor oil.                                          (1)
                                                                                                 [23]

QUESTION 7 (Start on a new page.)

The graph below represents the results of an experiment that was conducted by a
learner using a capacitor. The learner measures the charge stored in the different
potential differences.

                                 Graph of charge vs potential difference
                   30

                   25

                   20

      Charge (C)
                   15

                   10

                   5

                   0
                         0         2          4         6          8          10         12
                                             Potential difference (V)

7.1 Define the term capacitance.                                                                  (2)

7.2 Use the results on the graph to calculate the capacitance of the capacitor in this
    experiment.                                                                                   (3)

7.3 What is the relationship between the charge and the potential difference in this
    experiment?                                                                                   (2)

7.4 Give TWO examples of capacitors that are used in technology.                                  (2)
                                                                                                  [9]

                                                                                                 P.T.O.

### Page 12

Downloaded from hlayiso.com
                                                  TECHNICAL SCIENCES
                                                                                    12
                                                  (PAPER 1)          11101/23

QUESTION 8 (Start on a new page.)

In the circuit diagram below, the battery has an emf of 12 V. Ignore the internal
resistance of the battery.

8.1 State Ohm’s Law in words.                                                         (2)

8.2 Calculate the:

     8.2.1 Total resistance of the circuit                                            (4)

     8.2.2 The reading on the ammeter                                                 (3)

     8.2.3 The reading on the voltmeter                                               (3)

     8.2.4 The power in the 3 Ω resistor                                              (4)

8.3 Will the ammeter reading INCREASE, DECREASE or REMAIN THE SAME if
    the 3 Ω resistor is removed? Give a reason for your answer.                      (2)
                                                                                    [18]

                                                                                    P.T.O.

### Page 13

Downloaded from hlayiso.com
                                                   TECHNICAL SCIENCES
                                                                                         13
                                                   (PAPER 1)          11101/23

QUESTION 9 (Start on a new page.)

When a surface is shiny and smooth, like a mirror, light will be reflected.

9.1 Draw a ray diagram and indicate the following labels:

            Angle of incidence
            Angle of reflection
            Normal
            Incident ray
            Reflection ray
            Mirror                                                                       (5)

9.2 Define the term critical angle.                                                       (2)

9.3 Define the term dispersion.                                                           (2)

9.4 How are the wavelength, frequency and speed of light affected as light travels
    from air to water?                                                                    (3)
                                                                                         [12]

QUESTION 10 (Start on a new page.)

In Physics, electromagnetic radiation refers to the waves of the electromagnetic field
propagating through space-time carrying electromagnetic radiant energy.

10.1       Define an electromagnetic wave.                                                (2)

10.2       Name FOUR properties of electromagnetic waves.                                 (4)

10.3       Explain where in the medical world we use electromagnetic waves.               (1)

10.4       Explain the use of the waves as mentioned in QUESTION 10.3.                    (2)
                                                                                          [9]

                                                                               TOTAL:    150

                                               END

### Page 14

Downloaded from hlayiso.com
                                              TECHNICAL SCIENCES
                                                                                14
                                              (PAPER 1)          11101/23

             DATA FOR TECHNICAL SCIENCES GRADE 12 PAPER 1
         GEGEWENS VIR TEGNIESE WETENSKAPPE GRAAD 12 VRAESTEL 1

          TABLE 1: PHYSICAL CONSTANTS/TABEL 1: FISIESE KONSTANTES

         NAME/NAAM                 SYMBOL/SIMBOOL       VALUE/WAARDE
Acceleration due to gravity
                                         g                   9,8 mꞏs-2
Swaartekragversnelling
Universal gravitational constant
                                         G             6,67 x 10-11 Nꞏm2ꞏkg-2
Universele gravitasie konstante
Speed of light in a vacuum
                                         c                3,0 x 108 mꞏs-1
Spoed van lig in ŉ vakuum
Planck's constant
                                         h                6,63 x 10-34 Jꞏs
Planck se konstante
Coulomb's constant
                                         k              9,0 x 109 Nꞏm2ꞏC-2
Coulomb se konstante
Charge on electron
                                         e                 -1,6 x 10-19 C
Lading op elektron
Electron mass
                                         me               9,11 x 10-31 kg
Elektronmassa
Mass of Earth
                                         M                5,98 x 1024 kg
Massa van Aarde
Radius of Earth
                                         RE                6,38 x 103 km
Radius van Aarde

### Page 15

Downloaded from hlayiso.com
                                                                         TECHNICAL SCIENCES
                                                                                                         15
                                                                         (PAPER 1)          11101/23

                                     TABLE 2: FORMULAE/TABEL 2: FORMULES

MOTION/BEWEGING
                                                           Δx  v i Δt  21 a t 2 or/of
 v f  v i  a t
                                                           Δy  v i Δt  21 at 2
                                                                 v  vf                 v  vf 
   2        2                         2
 v f  v i  2ax or/of v f  v i  2a y
                                             2
                                                           Δx   i       Δt or/of Δy   i       Δt
                                                                 2                      2 

FORCE/KRAG
 Fnet  ma                                                 p mv
        f                                                           fs   /
                                                                         x
                                                                         a
                                                                         m
                                                                          s
                                                                          k
                                                                          a
                                                                          m
 k  k                                                    μs 
                                                                     (
                                                                         N       )

        N
 Fnet t  p
                                                           w  mg
 p  mv f  mv i
       Gm1m2                                                        Gm
 F                                                        g
        r2                                                          r2

WORK, ENERGY AND POWER/ARBEID, ENERGIE EN DRYWING
 W  Fx cos                       U  mgh         or/of      E P  mgh
    1                       1       Wnet  K        or/of      Wnet  Ek
 K  mv 2      or/of    Ek  mv2
    2                       2
                                    K  K f  K i or/of       Ek  Ekf  Eki
Wnc = ∆K + ∆U or/of Wnc = ∆Ek + ∆Ep Pav  Fv av    Pgemid  Fv gemid
                                                                             /

       W
 P
       t

WAVES, SOUND AND LIGHT/GOLWE, KLANK EN LIG
                                  1
 vf                          T
                                  f
                                                           E  hf
      v  vL                          v  vL
 fL         fs         or/of    fL         fb                      c
      v  vs                          v  vb               E h
                                                                     

 E  Wo  K max/maks                      E  Wo  E k (             where/waar
                                                           s
                                                           /
                                                           k
                                                           x
                                                           a
                                                           a
                                                           m
                                                           m
                             or/of                              )

                                                                1        /   s
 E  hf and/en W0  hf0 and/en Ek (
                                                                             k
                                                                mv 2
                                                           s             x
                                                                                                or/of
                                                     /
                                                     x
                                                     a     k
                                                           a             a
                                                                         m   a
                                                                             m
                                                     m     m
                                                           )                         ........
                                                                2
                     1       /  s
                                k
                     mv 2
       /    s                x  a
 K(
       x
       a    k
            a                a
                             m  m
       m    m
                )
                     2

### Page 16

Downloaded from hlayiso.com
                                                TECHNICAL SCIENCES
                                                                                             16
                                                (PAPER 1)          11101/23

ELECTROSTATICS/ELEKTROSTATIKA
    kQ 1Q 2                      kQ
 F      2
                              E 2
       r                         r
    F                            W
 E                           V
     q                           q
     Q          Q
 n=          n=
     e or/of    qe

ELECTRIC CIRCUITS/ELEKTRIESE STROOMBANE
    V                           emf ( ε ) = I(R + r)
 R
    I
 R s  R1  R 2  ...
  1    1     1                       qI t
               ...
 R p R1 R 2
W = Vq                                    W
                                     P
                                          Δt
W = VI  t
                                     P = VI
W= I2R  t

          2
                                     P = I 2R
      V Δt
W=                                       V2
       R                             P
                                          R

ALTERNATING CURRENT/WISSELSTROOM
         I
 I rms  max/maks /
             2                Paverage  Vrms I rms            /   Pgemiddeld  Vwgk I wgk
              s
         I
          /
          x
          a   k
              a
          m   m
 I wgk 
             2                P         I2 R                      Pgemiddeld  I 2wgk R
                                      average    rms       /
          Vmax/maks
 Vrms                   /                        2
                                                Vrms                               2
                                                                                  Vwgk
             2                       Paverage         /           Pgemiddeld 
        Vmax/maks                                R                                 R
 Vwgk 
             2

## Related documents

- [Technical Sciences P2 (English) QP](https://www.hlayiso.com/library/technical-sciences-p2-english-qp/c441f76e-c053-4840-bdab-4d3a60b8d664) — Technical Sciences · QP · 2023 · Eng
- [TECHNICAL SC P1 GR12 QP JUNE 2023 English](https://www.hlayiso.com/library/technical-sc-p1-gr12-qp-june-2023-english/1df8dd81-509c-4d57-8cea-9115bf53a1d0) — Technical Sciences · QP · 2023 · Eng
- [TECH SCIENCES P1 QP GR12 SEPT2023 English](https://www.hlayiso.com/library/tech-sciences-p1-qp-gr12-sept2023-english/507ed312-28c7-4819-a72c-055bb0dfebb3) — Technical Sciences · QP · 2023 · Eng
- [Technical Sciences P1 (English) 2021 QP](https://www.hlayiso.com/library/technical-sciences-p1-english-2021-qp/ca8bec91-5842-46fc-9eaa-bc686d47ae51) — Technical Sciences · QP · 2021 · Eng
- [Technical Sciences P2 (English) Memo](https://www.hlayiso.com/library/technical-sciences-p2-english-memo/82d880d0-f9aa-495e-ae14-ab0637acf2b1) — Technical Sciences · Memo · 2023 · Eng
- [TECH SCIENCES P1 GR12 MEMO JUN2023 Afr+English](https://www.hlayiso.com/library/tech-sciences-p1-gr12-memo-jun2023-afr-english/18d5d6dd-0e87-4d04-88a2-beb3fa330a5f) — Technical Sciences · Memo · 2023 · Eng

## More from Grade 12 Technical Sciences

- [Grade 12 Technical Sciences P1 November 2026 Mock Memo](https://www.hlayiso.com/library/grade-12-technical-sciences-2026-nsc-november-mock-exam-memorandum-paper-1/5543b9af-5bb3-4e43-95e3-ad6028ca21e8) — Memo · 2026 · Eng
- [Gr 12 Tech Sci ATP 2023-24](https://www.hlayiso.com/library/gr-12-tech-sci-atp-2023-24/a7a03e64-2e18-4f50-a7fa-6eb1a25136c7) — ATP
- [TECH SC P1 MEMO GR12 SEPT 2025 E+A watermark](https://www.hlayiso.com/library/tech-sc-p1-memo-gr12-sept-2025-e-a-watermark/4a156330-3801-46dc-b908-43c35dc64891) — Memo · 2025
- [TECHNICAL SCIENCES P2 MG GR12 SEPT2025 watermark](https://www.hlayiso.com/library/technical-sciences-p2-mg-gr12-sept2025-watermark/717f8fcd-96bb-4848-8cb7-68903a8f0550) — Memo · 2025
- [Technical Sciences P1 Erratum June Commom Updated](https://www.hlayiso.com/library/technical-sciences-p1-erratum-june-commom-updated/c0a5373a-1bd4-4019-b849-f2a26fa7ab0b) — Errata · 2024
- [TECH SCIENCES P1 GR12 MEMO JUNE 2024 Afr+English](https://www.hlayiso.com/library/tech-sciences-p1-gr12-memo-june-2024-afr-english/7f012694-b60e-4910-b0d6-e43dd5b126e8) — Memo · 2024 · Eng

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
