# Physical Sciences Grade 12 P2 Western Cape Mock 2018 QP

> Grade 12 Physical Sciences Paper 2 question paper from the Western Cape Mock Exam 2018, 18 pages. Read online or download the free PDF.

- Page: https://www.hlayiso.com/library/wp-2018-paper-2/c73413de-9a9a-4ec1-9bc9-89eb84420e6e
- Updated: 2026-09-27
- Subject: Physical Sciences
- Grade: Grade 12
- Document type: Question paper
- Year: 2018
- Exam period: Western Cape Mock Exam
- Paper: 2
- Curriculum: CAPS
- Pages: 18

Breadcrumbs: [Home](https://www.hlayiso.com/) › [Library](https://www.hlayiso.com/library) › [Grade 12](https://www.hlayiso.com/library/grade-12) › [Physical Sciences](https://www.hlayiso.com/library/grade-12/physical-sciences) › [Physical Sciences Grade 12 P2 Western Cape Mock 2018 QP](https://www.hlayiso.com/library/wp-2018-paper-2/c73413de-9a9a-4ec1-9bc9-89eb84420e6e)

## About this document

Physical Sciences · Grade 12 · Western Cape Mock Exam · 2018. Question paper, 18 pages. Read online or download the PDF.

Read it free online on the page above; download the PDF from there.

## Document text

Text extracted from the PDF. Layout, diagrams and tables may not survive extraction.

### Page 1

Downloaded from hlayiso.com

                    CAPE WINELANDS PLC COMMON PAPER

PHYSICAL SCIENCES - PAPER 2                                       SEPTEMBER 2018

GRADE 12                                                              TIME: 3 HOURS

EXAMINERS: CWED PLC                                                      TOTAL: 150
MODERATORS: A WESSELS & MZ MOERAT
____________________________________________________________________________

 INSTRUCTIONS AND INFORMATION

 1.     Write your name in the space below and submit the Examination
        Paper with your Answer Book.

      NAME: ………………………………………………………………………..

 2.    This question paper consists of 10 questions. Answer ALL the
       questions in the ANSWER BOOK.

 3.    Number the answers correctly according to the numbering system
       used in this question paper

 4.    Leave ONE line between two sub questions, for example between
       QUESTION 2.1 and QUESTION 2.2.

 5.    You may use a non-programmable calculator.

 6.    You may use appropriate mathematical instruments.

 7.    You are advised to use the attached DATA SHEETS.

 8.    Show ALL formulae and substitutions in ALL calculations.

 9.    Round off your final numerical answers to a minimum of TWO
       decimal places.

 10.   Give brief motivations, discussions etc where required.

### Page 2

Downloaded from hlayiso.com
                                                                                      1

QUESTION 1 (Multiple-choice)

Four options are provided as possible answers to the following questions. Each question has
only ONE correct answer. Write only the letter (A – D) next to the question number (1.1 –
1.10) on your ANSWER BOOK.
1.1   The correct IUPAC name of the following compound is:

      A   3-chloro-4-methylpentane
      B   3-chloro-2-methylpentane
      C   2-methyl-3-chloropentane
      D   4-methyl-3-chloropentane.
                                                                                       (2)

1.2   When ethene reacts with hydrogen gas in the presence of a catalyst, the
      product is …

      A   ethane.
      B   ethyne.
      C   ethanol.
      D   ethanal.                                                                     (2)
1.3   Study the structural formula of the functional group below.
      The structure above is the functional group of …

      A   esters.
      B   ketones.
      C   aldehydes.
      D   carboxylic acids.
                                                                                       (2)

### Page 3

Downloaded from hlayiso.com
                                                                                        2

1.4   The potential energy graph for a hypothetical chemical reaction is shown below.

      What type of reaction is taking place and what are the correct methods to
      calculate H and Ea?

                                                                                        (2)

1.5   Consider the reversible reaction:
                      N2(g) + 3 H2(g)      ⇄ 2 NH3 (g)         ∆H < 0.
      The graph of reaction rate vs time for the above reaction is shown below.

      The solid line reflects the forward reaction, while the broken line depicts the
      reverse reaction. Which one of the changes below explains the change in the
      graph at time X?

      A   Temperature is decreased
      B   Temperature is increased
      C   Concentration of H2 is decreased
      D   Concentration of N2 is increased.                                             (2)

### Page 4

Downloaded from hlayiso.com
                                                                                       3

1.6   The reaction represented by the balanced equation below reaches equilibrium in
      a closed container.

                           H2(g) + I2(g) ⇌ 2HI(g)              ∆H < 0
      How will the equilibrium be affected if, first the volume of the container is
      decreased and then the temperature is increased?

      A At first no effect and then the reverse reaction is favoured.
      B The reverse reaction is favoured by both changes.
      C At first no effect and then the forward reaction is favoured
      D A first the reverse reaction is favoured and then the forward
        reaction is favoured.                                                          (2)

1.7   A few drops of concentrated sulphuric acid are gradually added to 1 dm3 of
      water at 25 °C.

      Which ONE of the following graphs illustrates the relationship between [H+]
      and [OH-] as the acid is added to the water?

                                                                                       (2)
1.8   A galvanic cell consists of the following half-cells:

                   Pt(s) |Cℓ2(g) |Cℓ-(aq)       AND           Cu2+(aq) |Cu(s)

      Which ONE of the following statements is TRUE while the cell is functioning?

      A   Cu(s) is oxidised.
      B   Cℓ-(aq) is reduced.
      C   Cℓ2(g) acts as reducing agent.
      D   Cu(s) acts as oxidising agent.                                               (2)

### Page 5

Downloaded from hlayiso.com
                                                                                             4

1.9    A learner wants to electroplate a copper ring with nickel. He uses the experimental
       set-up shown in the simplified diagram below.

       Which ONE of the following is CORRECT?

                                                                                             (2)

1.10   Which ONE of the following compounds is produced in the Ostwald process?

       A   N2(g)
       B   NH3(g)
       C   HNO3(ℓ)
       D   NH4NO3(s)                                                                         (2)

### Page 6

Downloaded from hlayiso.com
                                                                           5

QUESTION 2 (Start on a new page)

The letters A to F in the table below represent six organic compounds.

2.1    Write down the:

       2.1.1 NAME of the functional group of compound B.                   (1)
       2.1.2 Homologous series to which compound C belongs.                (1)
       2.1.3   Type of polymerisation reaction that produces compound F.   (1)
2.2    Write down the IUPAC name of:

       2.2.1 The monomer used to prepare compound F.                       (1)
       2.2.2 Compound C.                                                   (2)
       2.2.3 Compound D.                                                   (2)
       2.2.4 An unsaturated compound.                                      (1)

### Page 7

Downloaded from hlayiso.com
                                                                                           6

2.3   Write down the NAME or FORMULA of each product formed during the
      complete combustion of compound D.                                                   (2)

2.4   Write down the structural formula of:

      2.4.1 Compound B.                                                                    (2)
      2.4.2 A chain isomer of compound A.                                                  (2)
2.5   A laboratory assistant uses bromine water to distinguish between compounds D
      and E (in the table above). She adds bromine water to a sample of each in two
      different test tubes. She observes that the one compound decolourises the
      bromine water immediately, whilst the other one only reacts after placing the test
      tube in direct sunlight.

      Write down the:

      2.5.1 Letter (D or E) of the compound that will immediately decolourise
            the bromine water.                                                             (1)

      2.5.2 Name of the type of reaction that takes place in the test tube
            containing compound D.                                                         (1)
      2.5.3 Structural formula of the organic product formed in the test tube
            containing compound E.                                                         (2)
                                                                                           [19]

### Page 8

Downloaded from hlayiso.com
                                                                                         7

QUESTION 3 (Start on a new page)

3.1   Table 1 below shows the results obtained from Investigation 1 to determine the
      boiling point of three alkanes.

      3.1.1   Give one word for: The temperature where the vapour pressure of a
              substance is equal to the atmospheric pressure.                                (1)
      3.1.2   Write down the independent variable for Investigation 1.                       (1)
      3.1.3   Describe the trend in the boiling points of the three alkanes.                 (1)

      3.1.4   Explain the trend in the boiling points of the three alkanes. Refer to
              intermolecular forces and energy in the answer.                                (3)
3.2   Table 1 and Table 2 also show the results obtained from Investigation 2 to obtain the
      boiling points of alkanes and alcohols with comparable mass.
      3.2.1   Other than molecular mass, state another control variable in
              Investigation 2.                                                               (1)

      3.2.2   The boiling point of each alcohol is much higher than that of the alkane
              of comparable molecular mass. Explain this observation by referring to
              intermolecular forces and energy in the answer.                                (3)
3.3   In Table 3 the vapour pressure of two alcohols are determined at 20 °C.

      3.3.1   Choose between ethanol and alcohol X the alcohol that evaporates the
              slowest at 20 °C.                                                              (1)
      3.3.2   Identify alcohol X as either methanol or propan-1-ol.                       (1)
                                                                                         [12]

### Page 9

Downloaded from hlayiso.com
                                                                                           8

QUESTION 4 (Start on a new page)

4.1   In the flow diagram below, X, Y and Z represent three different types of organic reactions.
      P represents an organic compound.

      Write down:

      4.1.1 the IUPAC name of the organic by-product formed in Reaction X.                  (2)
      4.1.2 the solvent needed for Reaction X.                                              (1)
      4.1.3 the structural formula of compound P.                                           (2)
      4.1.4 apart from the organic reactant, the name or formula of the other
            reactant needed in Reaction Z.                                                  (1)
4.2   Esters are natural compounds found in plants causing the pleasant fragrance of flowers
      and fruits. Such a compound is methyl butanoate which is present in pineapple oil.

      4.2.1 Write a balanced equation, using structural formulas, for the formation of
            methyl butanoate.                                                               (5)

      4.2.2 Pentanoic acid is a structural isomer of methyl butanoate. Name the
            type of structural isomer.                                                      (1)
                                                                                            [12]

### Page 10

Downloaded from hlayiso.com
                                                                                           9

QUESTION 5 (Start on a new page)

NOTE:         The graph for QUESTION 5.3.2 must be drawn on the GRAPH SHEET
              attached at the end of the QUESTION PAPER.

Methanol and hydrochloric acid react according to the following balanced equation:

                  CH3OH (aq) + HCℓ (aq) →           CH3Cℓ (aq) + H2O (ℓ)

5.1     Give two ways how the rate of this reaction can be increased.                      (2)

5.2     Define the term reaction rate.                                                     (2)

5.3     The rate of the reaction between methanol and hydrochloric acid is investigated.
        The concentration of HCℓ (aq) was measured at different time intervals. The
        following results were obtained:

        5.3.1 Calculate the average reaction rate, in (mol∙dm-3)∙min-1 during the first
                                                                                           (3)
              15 minutes.
        5.3.2 Use the data in the table to draw a graph of concentration versus time
              on the attached graph sheet.
              NOTE: The graph is not a straight line.
              (ATTACH THIS GRAPH SHEET TO YOUR ANSWER BOOK.)                               (3)
        5.3.3 From the graph, determine the concentration of HCℓ (aq) at the
              40th minute.                                                                 (1)

        5.3.4 Use the collision theory to explain why the reaction rate decreases
              with time. Assume that the temperature remains constant.                     (3)
        5.3.5 Calculate the mass of CH3Cℓ (aq) in the flask at the 215th minute.
              The volume of the reagents remains 60 cm3 during the reaction.               (5)
                                                                                           [19]

### Page 11

Downloaded from hlayiso.com
                                                                                         10

QUESTION 6 (Start on a new page)

Many industries in South Africa rely on sulphuric acid and the compounds it is used to
produce. The large-scale production of sulphuric acid involves the following
equilibrium:
                2SO2 (g) + O2 (g) ⇌ 2SO3 (g)       ΔH < 0

6.1    State Le Chatelier’s Principle.                                                    (2)

6.2    How will each of the following changes affect the yield of SO3 (g) at
       equilibrium?
       Choose from INCREASES, DECREASES andREMAINS THE SAME.
       Explain by using Le Chatelier’s Principle.
       6.2.1   An increase in pressure by decreasing the volume.                          (3)
       6.2.2   An increase in temperature.                                                (3)
6.3    In a laboratory experiment, 5 mol SO2 and 3 mol O2 are sealed in a 2 dm3
       container. The graph below shows how the number of moles of reactants
       and products change over a 15 minute period.

       6.3.1   After 5 minutes, the concentration of oxygen gas in the container
               was found to be 0,9 mol.dm-3. Calculate the value of Kc between 5 and
               10 minutes.                                                           (7)
       6.3.2   What disturbance occurred at t = 10 minutes?                               (1)
       6.3.3   How does the disturbance at t = 10 minutes affect the value of Kc?
               Write down only INCREASES or DECREASES or NO CHANGE.                       (1)

### Page 12

Downloaded from hlayiso.com
                                                                             11

After 12 minutes the following sketch graph of reaction rate against time
isobtained for the equilibrium mixture.

6.3.4   A catalyst is added to the equilibrium mixture at time 15 minutes.
        Redraw the graph above in your ANSWER BOOK. On the same set of
        axes, complete the graph showing the effect of the catalyst on the
        reaction rates.                                                       (2)
                                                                              [19]

### Page 13

Downloaded from hlayiso.com
                                                                                        12

QUESTION 7 (Start on a new page)

7.1   Sulphuric acid ionises in two steps as shown below:

                                                                    Ka at 25 °C

        Step 1           H2SO4 + H2O → H3O+ + HSO4 −                Very large

        Step 2            HSO4− + H2O → H3O+ + SO4 2−                1,2 × 10−2

      7.1.1 Explain why the Ka value for Step 1 is a very large number.                  (1)

      7.1.2 H2O is acting as a base in both reactions. Give the definition of a base
            according to Lowry-Bronsted.                                                 (1)
      7.1.3 Write down the FORMULA of a substance that acts as an ampholyte in
            these reactions.                                                             (1)
      7.1.4 Write down the NAME for the conjugate base of HSO4−.                         (1)

7.2   A titration between solutions of a strong base and oxalic acid (COOH)2 is
      performed. The oxalic acid is added from apparatus X into a conical flask until
      a point where the indicator changes colour is reached.

      7.2.1 Write down a term for the underlined phrase.                                 (1)
      7.2.2 Name apparatus X from which the oxalic acid is added.                        (1)

      7.2.3 How is the pH of the content in the conical flask influenced while the
            acid is added to it? Choose from INCREASES, DECREASES and
            STAYS THE SAME.                                                              (1)
      7.2.4 A learner performing the titration measures the pH of the solution just
            after the point where the indicator changes colour and finds that the
            solution has a pH groter as 7. Explain why the solution has a pH
            greater than 7.                                                              (2)

### Page 14

Downloaded from hlayiso.com
                                                                                         13

7.3   6 dm3 H2SO4 solution with a concentration of 0,01 mol.dm-3 is prepared in a
      container. A few drops of bromothymol blue are added to the solution. The
      mixture is yellow.
      7.3.1 Calculate the number of moles of sulphuric acid present in the solution.      (3)

      4,4 g of sodium hydroxide pellets are added to the sulphuric acid. The colour of
      the mixture remains yellow, indicating the acid is not yet fully neutralized.
      The reaction that takes place is:

                          2NaOH + H2SO4 → Na2SO4 + 2H2O

      7.3.2 Calculate the number of moles of sulphuric acid that has reacted with
            the sodium hydroxide.                                                         (3)

      7.3.3 Calculate the pH of the solution in the container. Assume that the acid
            ionizes completely and that the volume of the mixture is not significantly
            influenced by the addition of the pellets.                                 (6)
                                                                                          [21]

### Page 15

Downloaded from hlayiso.com
                                                                                     14

QUESTION 8 (Start on a new page)

The diagram below shows a galvanic cell operating under standard conditions.

With switch S is OPEN, the voltmeter shows a reading.

8.1    Write down the:
       8.1.1 NAME or FORMULA of the oxidising agent.                                  (1)
       8.1.2 Half reaction which takes place at the anode.                            (2)
       8.1.3 Cell notation for this cell.                                             (3)
8.2    Calculate the emf of this cell.                                                (3)

Switch S is now CLOSED and the bulb lights up.
8.3    How will the reading on the voltmeter now compare to the initial reading as
       calculated in QUESTION 8.2? Write down only GREATER THAN, SMALLER
       THAN or EQUAL TO. Give a reason for the answer.                                (2)

                                                                                      [11]

### Page 16

Downloaded from hlayiso.com
                                                                                            15

QUESTION 9 (Start on a new page)

The electrolytic cell, represented in the diagram below, is set up to purify copper which
contains platinum and silver impurities.

During the purification of 28 g of the impure copper, 0,8 mol of electrons are transferred from
the anode to the cathode.

9.1    Calculate the mass of copper atoms formed at the cathode.                             (4)

9.2    The copper used for electrical wiring and cables must be 99,99% pure.
       Determine by calculation whether the impure copper sample is suitable for
       use in electrical wiring and cables.
       (Assume that all the copper at anode has reacted).                                    (4)

During the purification, a sludge containing the metals platinum and silver forms at the
bottom of the container.
9.3    Use the relative strengths of reducing agents to explain why platinum and
       silver atoms are not oxidised during the purification of copper.                      (1)
                                                                                             [9]

### Page 17

Downloaded from hlayiso.com
                                                                                         16

QUESTION 10 (Start on a new page)

Sulphuric acid is produced by the contact process and is used in the production of the
fertilisers such as ammonium sulphate.

10.1   In one of the steps in this process, sulphur trioxide is dissolved in sulphuric
       acid rather than in water to produce oleum.
       10.1.1   Write down a balanced equation showing how oleum is produced.             (3)

       10.1.2   Give a reason why sulphur trioxide is not dissolved in water to
                produce sulphuric acid.                                                   (1)
10.2   A farmer wants to use a fertiliser which promotes root growth in his vegetables
       garden. He must choose between ammonium sulphate, ammonium nitrate and
       ammonium phosphate.

       The percentage of the elements in each of the fertilisers is given in the table
       below.

       10.2.1   Which ONE of the above fertilizers will be the best choice? Refer to
                the data in the table to give a reason for the answer.                    (2)
       10.2.2   Write down ONE negative impact of the overuse of fertilizer on the
                environment.                                                              (2)

                                                                                          [8]

                                                                               TOTAL: 150

### Page 18

Downloaded from hlayiso.com
                                                17

QUESTION 5.3.2 (Place in your answer book)

NAME OF LEARNER: ……………………………………………………………………….

## Related documents

- [WP 2018 Paper 1](https://www.hlayiso.com/library/wp-2018-paper-1/7745da05-6836-4240-9b30-1cc144cc0c0d) — Physical Sciences · QP · 2018
- [PHYSICAL SCIENCES P2 GR12 QP SEPT 2018 Afrikaans](https://www.hlayiso.com/library/physical-sciences-p2-gr12-qp-sept-2018-afrikaans/851ef73d-62a5-4b19-b6cb-e009163ddf34) — Physical Sciences · QP · 2018 · Afr
- [MP 2018 Paper 2](https://www.hlayiso.com/library/mp-2018-paper-2/7cb0aef1-8cd5-4242-962a-2ba444401276) — Physical Sciences · QP · 2018
- [Physical Sciences P2 Nov 2018 Eng](https://www.hlayiso.com/library/physical-sciences-p2-nov-2018-eng/a55a6ce4-f4fe-4b24-ae96-204bfbb7f007) — Physical Sciences · QP · 2018 · Eng
- [WC 2015 SEPT Winelands Chemistry P 2](https://www.hlayiso.com/library/wc-2015-sept-winelands-chemistry-p-2/28490db9-ab62-44aa-a595-f5867a834525) — Physical Sciences · QP · 2015
- [GP 2018 Paper 2 Memorandum](https://www.hlayiso.com/library/gp-2018-paper-2-memorandum/b76b99ee-4834-4d11-bd2c-3650944f8134) — Physical Sciences · Memo · 2018

## More from Grade 12 Physical Sciences

- [Pysical Sciences P2 Memo AfrEng watermark](https://www.hlayiso.com/library/pysical-sciences-p2-memo-afreng-watermark/cb0c7842-3512-4579-a012-a91b31f09008) — Memo · 2025
- [PHY SC P1 MEMO GR 12 SEPT 2025 E+A watermark](https://www.hlayiso.com/library/phy-sc-p1-memo-gr-12-sept-2025-e-a-watermark/ee8fc295-8eb6-4163-acb0-c6d2b3dec26f) — Memo · 2025
- [Physical Sciences Physics Grade 12 NSC MEMO P1 May June 2025 Limpopo](https://www.hlayiso.com/library/physical-sciences-physics-grade-12-nsc-memo-p1-may-june-2025-limpopo/82f7a5dc-e27f-400b-84ae-bcf3217097d6) — Memo · 2025
- [Physical Sciences Physics Grade 12 NSC MEMO P2 May June 2025 Limpopo](https://www.hlayiso.com/library/physical-sciences-physics-grade-12-nsc-memo-p2-may-june-2025-limpopo/f2cd1409-6db0-4f23-b078-ce944b93c2b5) — Memo · 2025
- [Physics Grade 12 NSC P1 MEMO September 2025 Limpopo](https://www.hlayiso.com/library/physics-grade-12-nsc-p1-memo-september-2025-limpopo/ee326b2b-8480-42f2-8ce0-7bcf6229bde6) — Memo · 2025
- [Physical Sciences Physics Grade 12 NSC QP P1 May June 2025 Mpumalanga](https://www.hlayiso.com/library/physical-sciences-physics-grade-12-nsc-qp-p1-may-june-2025-mpumalanga/d9c5f1c3-bd6c-468e-a50a-f6b40782c695) — QP · 2025

## Collection

- [Grade 12 past papers](https://www.hlayiso.com/grade-12/past-papers)

---

Hlayiso: free CAPS and IEB past papers, memos, notes and study guides for South African learners. When citing, link the page URL above, not a PDF or /api/ URL.
